| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 retbleed fixes from Borislav Petkov:
"Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the
now pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide"
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
x86/speculation: Disable RRSBA behavior
x86/kexec: Disable RET on kexec
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
x86/bugs: Add Cannon lake to RETBleed affected CPU list
x86/retbleed: Add fine grained Kconfig knobs
x86/cpu/amd: Enumerate BTC_NO
x86/common: Stamp out the stepping madness
KVM: VMX: Prevent RSB underflow before vmenter
x86/speculation: Fill RSB on vmexit for IBRS
KVM: VMX: Fix IBRS handling after vmexit
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
KVM: VMX: Convert launched argument to flags
KVM: VMX: Flatten __vmx_vcpu_run()
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
x86/speculation: Remove x86_spec_ctrl_mask
x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
x86/speculation: Fix SPEC_CTRL write on SMT state change
x86/speculation: Fix firmware entry SPEC_CTRL handling
x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
...
|
|
Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU. If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.
To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand. [This is analogous to what
happened before commit 4c06c4e6cf63 ("driver core: Fix possible
supplier PM-usage counter imbalance").]
Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.
However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary
Speculative Code Execution with Return Instructions) attack.
[peterz: add hygon]
[kim: invert parity; fam15h]
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two sets of fixes - one for things that were missed with the support
for custom bulk I/O operations introduced in the last merge window,
and another for some long standing issues with regmap-irq which affect
a fairly small subset of devices"
* tag 'regmap-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
regmap: Wire up regmap_config provided bulk write in missed functions
regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't set
regmap: Re-introduce bulk read support check in regmap_bulk_read()
|
|
We need to divide the sub-irq status register offset by register
stride to get an index for the status buffer to avoid an out of
bounds write when the register stride is greater than 1.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.
Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are some functions that were missed by commit d77e74561368 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.
The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.
Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.
But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.
Also is a fragile assumption to make so is better to make it fail earlier.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e74561368 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.
Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback and ext2 fixes from Jan Kara:
"A fix for writeback bug which prevented machines with kdevtmpfs from
booting and also one small ext2 bugfix in IO error handling"
* tag 'fs_for_v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
init: Initialize noop_backing_dev_info early
ext2: fix fs corruption when trying to remove a non-empty directory with IO error
|
|
Currently unpoison_memory(unsigned long pfn) is designed for soft
poison(hwpoison-inject) only. Since 17fae1294ad9d, the KPTE gets cleared
on a x86 platform once hardware memory corrupts.
Unpoisoning a hardware corrupted page puts page back buddy only, the
kernel has a chance to access the page with *NOT PRESENT* KPTE. This
leads BUG during accessing on the corrupted KPTE.
Suggested by David&Naoya, disable unpoison mechanism when a real HW error
happens to avoid BUG like this:
Unpoison: Software-unpoisoned page 0x61234
BUG: unable to handle page fault for address: ffff888061234000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 2c01067 P4D 2c01067 PUD 107267063 PMD 10382b063 PTE 800fffff9edcb062
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 26551 Comm: stress Kdump: loaded Tainted: G M OE 5.18.0.bm.1-amd64 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...
RIP: 0010:clear_page_erms+0x7/0x10
Code: ...
RSP: 0000:ffffc90001107bc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000901 RCX: 0000000000001000
RDX: ffffea0001848d00 RSI: ffffea0001848d40 RDI: ffff888061234000
RBP: ffffea0001848d00 R08: 0000000000000901 R09: 0000000000001276
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000140dca R15: 0000000000000001
FS: 00007fd8b2333740(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888061234000 CR3: 00000001023d2005 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
prep_new_page+0x151/0x170
get_page_from_freelist+0xca0/0xe20
? sysvec_apic_timer_interrupt+0xab/0xc0
? asm_sysvec_apic_timer_interrupt+0x1b/0x20
__alloc_pages+0x17e/0x340
__folio_alloc+0x17/0x40
vma_alloc_folio+0x84/0x280
__handle_mm_fault+0x8d4/0xeb0
handle_mm_fault+0xd5/0x2a0
do_user_addr_fault+0x1d0/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
exc_page_fault+0x78/0x170
asm_exc_page_fault+0x27/0x30
Link: https://lkml.kernel.org/r/20220615093209.259374-2-pizhenwei@bytedance.com
Fixes: 847ce401df392 ("HWPOISON: Add unpoisoning support")
Fixes: 17fae1294ad9d ("x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.
Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
|
|
Commit 23cfbc6ec44e ("firmware: Add the support for ZSTD-compressed
firmware files") added support for ZSTD compression, but in the process
also made the previously default XZ compression a config option.
That means that anybody who upgrades their kernel and does a
make oldconfig
to update their configuration, will end up without the XZ compression
that the configuration used to have.
Add the 'default y' to make sure this doesn't happen.
The whole compression question should probably be improved upon, since
it is now possible to "enable" compression in the kernel config but not
enable any actual compression algorithm, which makes it all very
useless. It makes no sense to ask Kconfig questions that enable
situations that are nonsensical like that.
This at least fixes the immediate problem of a kernel update resulting
in a nonbootable machine because of a missed option.
Fixes: 23cfbc6ec44e ("firmware: Add the support for ZSTD-compressed firmware files")
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since we had to effectively reverted
commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") in an earlier patch, a non-zero
deferred_probe_timeout will break NFS rootfs mounting [1] again. So, set
the default back to zero until we can fix that.
[1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/
Fixes: 2b28a1a84a0e ("driver core: Extend deferred probe timeout on driver registration")
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220526034609.480766-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mounting NFS rootfs was timing out when deferred_probe_timeout was
non-zero [1]. This was because ip_auto_config() initcall times out
waiting for the network interfaces to show up when
deferred_probe_timeout was non-zero. While ip_auto_config() calls
wait_for_device_probe() to make sure any currently running deferred
probe work or asynchronous probe finishes, that wasn't sufficient to
account for devices being deferred until deferred_probe_timeout.
Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") tried to fix that by making
sure wait_for_device_probe() waits for deferred_probe_timeout to expire
before returning.
However, if wait_for_device_probe() is called from the kernel_init()
context:
- Before deferred_probe_initcall() [2], it causes the boot process to
hang due to a deadlock.
- After deferred_probe_initcall() [3], it blocks kernel_init() from
continuing till deferred_probe_timeout expires and beats the point of
deferred_probe_timeout that's trying to wait for userspace to load
modules.
Neither of this is good. So revert the changes to
wait_for_device_probe().
[1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/
[2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/
[3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/
Fixes: 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires")
Cc: John Stultz <jstultz@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-pm@vger.kernel.org
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220526034609.480766-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly extend the device property API and make it easier to use
in some cases.
Specifics:
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"
* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Advertise fwnode and device property count API calls
device property: Fix recent breakage of fwnode_get_next_parent_dev()
device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
device property: Introduce fwnode_for_each_parent_node()
device property: Allow error pointer to be passed to fwnode APIs
ACPI: property: Release subnode properties with data nodes
device property: Add irq_get to fwnode operation
device property: Add iomap to fwnode operations
ACPI: property: Move acpi_fwnode_device_get_match_data() up
device property: Convert device_{dma_supported,get_dma_attr} to fwnode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main change here is Marek's addition of bulk read/write callbacks
for individual regmaps, we've supported single register operations for
a while but there's enough hardware out there which can use bulk
equivalents to make it worthwhile"
* tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing map->bus check
regmap: Add bulk read/write callbacks into regmap_config
regmap: cache: set max_register with reg_stride
regmap: Constify static regmap_bus structs
|
|
Merge generlic power domains update for 5.19-rc1:
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
* pm-domains:
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns()
PM: domains: Extend dev_pm_domain_detach() doc
|
|
Merge PM core changes, updates related to system sleep and power capping
updates for 5.19-rc1:
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
* pm-core:
PM: runtime: Avoid device usage count underflows
iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace
PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv
iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume()
* pm-sleep:
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
PM: runtime: Allow to call __pm_runtime_set_status() from atomic context
PM: hibernate: Don't mark comment as kernel-doc
x86/ACPI: Preserve ACPI-table override during hibernation
PM: hibernate: Fix some kernel-doc comments
PM: sleep: enable dynamic debug support within pm_pr_dbg()
PM: sleep: Narrow down -DDEBUG on kernel/power/ files
* powercap:
powercap: intel_rapl: remove redundant store to value after multiply
powercap: intel_rapl: add support for ALDERLAKE_N
powercap: RAPL: Add Power Limit4 support for RaptorLake
powercap: intel_rapl: add support for RaptorLake
|
|
Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'vfio-notifier-fix' into next
|
|
If genpd has parsed the domain-idle-states from DT, it's reasonable to
believe that the parsed data should be correct for the HW in question.
Based upon this, it seem superfluous to let genpd measure the corresponding
power-on/off latencies for these states.
Therefore, let's improve the behaviour in genpd by avoiding the
measurements for the domain-idle-states that have been parsed from DT.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The measurements of the power-on|off latencies in genpd for a PM domain are
superfluous, unless the corresponding genpd has a governor assigned to it,
which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a genpd doesn't have an associated governor assigned, several variables
in the struct generic_pm_domain becomes superfluous.
Rather than wasting memory in allocated genpds, let's move the variables
from the struct generic_pm_domain into a new separate struct. In this way,
we can instead dynamically decide when we need to allocate the
corresponding data for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To improve the readability of the code, let's move the parts that deals
with allocation/freeing of data, into two separate functions.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the genpd governor we walk the list of child-domains to take into
account their next_wakeup. If the child-domain itself, doesn't have a
governor assigned to it, we can end up using the next_wakeup value before
it has been properly initialized. To prevent a possible incorrect behaviour
in the governor, let's initialize next_wakeup to KTIME_MAX.
Fixes: c79aa080fb0f ("PM: domains: use device's next wakeup to determine domain idle state")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When an IRQ safe device is attached to a non-IRQ safe PM domain, genpd
needs to prevent the PM domain from being powered off. However, genpd still
allows the device to be runtime suspended/resumed, hence it's also
reasonable to think that a governor may be used to validate the QoS latency
constraints.
Unfortunately, genpd_runtime_resume() treats the configuration above, as a
reason to skip measuring the QoS resume latency for the device. This is a
legacy behaviour that was earlier correct, but should have been changed
when genpd was transformed into its current behaviour around how it manages
IRQ safe devices. Luckily, there's no report about problems, so let's just
fixup the behaviour.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The QoS latency measurements for devices in genpd_runtime_suspend|resume()
are superfluous, unless the corresponding genpd has a governor assigned to
it, which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the corresponding genpd for the device doesn't use a governor, the
variable next_wakeup within the struct generic_pm_domain_data becomes
superfluous.
To avoid wasting memory, let's move it into the struct gpd_timing_data,
which is already being allocated based upon if there is governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a genpd doesn't have an associated governor assigned, there's really no
point to allocate the per device gpd_timing_data, as the data isn't being
used by a governor anyway.
To avoid wasting memory, let's therefore convert the corresponding td
variable in the struct generic_pm_domain_data into a pointer and manage the
allocation of its data dynamically.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In irq_safe_dev_in_sleep_domain() we correctly skip the dev_warn_once() if
the corresponding genpd for the device, has the GENPD_FLAG_ALWAYS_ON flag
being set. For the same reason (the genpd is always-on in runtime), let's
also skip the warning if the GENPD_FLAG_RPM_ALWAYS_ON flag is set for the
genpd.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The name "irq_safe_dev_in_no_sleep_domain", doesn't really match the
conditions that are being checked in the function, hence the code becomes a
bit confusing to read.
Let's clarify this by renaming it into "irq_safe_dev_in_sleep_domain" and
let's also take the opportunity to clarify a corresponding comment in the
code.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Back in the days when genpd supported intermediate power states of its
devices, it made sense to check the PM_QOS_FLAG_NO_POWER_OFF in
genpd_power_off(). This because the attached devices were all being put
into low power state together when the PM domain was also being powered
off.
At this point, the flag PM_QOS_FLAG_NO_POWER_OFF is better checked by
drivers from their ->runtime_suspend() callbacks, like in the
usb_port_runtime_suspend(), for example. Or perhaps an even better option
is to set the QoS resume latency constraint for the device to zero, which
informs the runtime PM core to prevent the device from being runtime
suspended.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Due to recent changes, the always-on governor is always used with a genpd
that has the GENPD_FLAG_RPM_ALWAYS_ON flag being set. This means genpd,
doesn't invoke the governor's ->power_down_ok() callback, which makes the
code in the governor redundant, so let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rather than relying on the genpd provider to set the corresponding flag,
GENPD_FLAG_RPM_ALWAYS_ON, when the always-on governor is being used, let's
add it in pm_genpd_init(). In this way, it starts to benefits all genpd
providers immediately.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
intel_pch_thermal driver needs a long delay to cool itself (60 seconds
in maximum) during suspend. When a wakeup event occures during the
delay, it is better for the intel_pch_thermal driver to detect this and
quit cooling because the suspend is likely to abort anyway.
Thus expose pm_wakeup_pending to modules so that intel_pch_thermal
driver can be aware of the wakeup events.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In __device_attach function, The lock holding logic is as follows:
...
__device_attach
device_lock(dev) // get lock dev
async_schedule_dev(__device_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__device_attach_async_helper will get lock dev as
well, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As shown above, when it is allowed to do async probes, because of
out of memory or work limit, async work is not allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__device_attach_async_helper getting lock dev.
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220518074516.1225580-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The deferred probe timer that's used for this currently starts at
late_initcall and runs for driver_deferred_probe_timeout seconds. The
assumption being that all available drivers would be loaded and
registered before the timer expires. This means, the
driver_deferred_probe_timeout has to be pretty large for it to cover the
worst case. But if we set the default value for it to cover the worst
case, it would significantly slow down the average case. For this
reason, the default value is set to 0.
Also, with CONFIG_MODULES=y and the current default values of
driver_deferred_probe_timeout=0 and fw_devlink=on, devices with missing
drivers will cause their consumer devices to always defer their probes.
This is because device links created by fw_devlink defer the probe even
before the consumer driver's probe() is called.
Instead of a fixed timeout, if we extend an unexpired deferred probe
timer on every successful driver registration, with the expectation more
modules would be loaded in the near future, then the default value of
driver_deferred_probe_timeout only needs to be as long as the worst case
time difference between two consecutive module loads.
So let's implement that and set the default value to 10 seconds when
CONFIG_MODULES=y.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220429220933.1350374-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When driver_attach(drv); failed, the driver_private will be freed.
But it has been added to the bus, which caused a UAF.
To fix it, we need to delete it from the bus when failed.
Fixes: 190888ac01d0 ("driver core: fix possible missing of device probe")
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220513112444.45112-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add "back" as a possible panel output when _PLD output from ACPI
indicates back panel.
Fixes: 6423d2951087 ("driver core: Add sysfs support for physical location of a device")
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220509214930.3573518-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
