summaryrefslogtreecommitdiffstats
path: root/drivers/base
AgeCommit message (Collapse)AuthorFilesLines
2011-07-26atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26drivers/base/power/opp.c: fix dev_opp initial valueJonghwan Choi1-1/+1
Dev_opp initial value shoule be ERR_PTR(), IS_ERR() is used to check error. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge branch 'driver-core-next' of ↵Linus Torvalds1-30/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: updated Documentation/ja_JP/SubmittingPatches debugfs: add documentation for debugfs_create_x64 uio: uio_pdrv_genirq: Add OF support firmware: gsmi: remove sysfs entries when unload the module Documentation/zh_CN: Fix messy code file email-clients.txt driver core: add more help description for "path to uevent helper" driver-core: modify FIRMWARE_IN_KERNEL help message driver-core: Kconfig grammar corrections in firmware configuration DOCUMENTATION: Replace create_device() with device_create(). DOCUMENTATION: Update overview.txt in Doc/driver-model. pti: pti_tty_install documentation mispelling.
2011-07-25Merge branch 'next' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: take the ACL checks to common code bury posix_acl_..._masq() variants kill boilerplates around posix_acl_create_masq() generic_acl: no need to clone acl just to push it to set_cached_acl() kill boilerplate around posix_acl_chmod_masq() reiserfs: cache negative ACLs for v1 stat format xfs: cache negative ACLs if there is no attribute fork 9p: do no return 0 from ->check_acl without actually checking vfs: move ACL cache lookup into generic code CIFS: Fix oops while mounting with prefixpath xfs: Fix wrong return value of xfs_file_aio_write fix devtmpfs race caam: don't pass bogus S_IFCHR to debugfs_create_...() get rid of create_proc_entry() abuses - proc_mkdir() is there for purpose asus-wmi: ->is_visible() can't return negative fix jffs2 ACLs on big-endian with 16bit mode_t 9p: close ACL leaks ocfs2_init_acl(): fix a leak VFS : mount lock scalability for internal mounts
2011-07-25fix devtmpfs raceAl Viro1-1/+2
After we's done complete(&req->done), there's nothing to prevent the scope containing *req from being gone and *req overwritten by any kind of junk. So we must read req->next before that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds7-0/+661
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regulator: Convert tps65023 to use regmap API regmap: Add SPI bus support regmap: Add I2C bus support regmap: Add generic non-memory mapped register access API
2011-07-23regmap: Add SPI bus supportMark Brown3-1/+77
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23regmap: Add I2C bus supportMark Brown3-0/+120
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23regmap: Add generic non-memory mapped register access APIMark Brown5-0/+465
There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds1-139/+198
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits) vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp isofs: Remove global fs lock jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory fix IN_DELETE_SELF on overwriting rename() on ramfs et.al. mm/truncate.c: fix build for CONFIG_BLOCK not enabled fs:update the NOTE of the file_operations structure Remove dead code in dget_parent() AFS: Fix silly characters in a comment switch d_add_ci() to d_splice_alias() in "found negative" case as well simplify gfs2_lookup() jfs_lookup(): don't bother with . or .. get rid of useless dget_parent() in btrfs rename() and link() get rid of useless dget_parent() in fs/btrfs/ioctl.c fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers drivers: fix up various ->llseek() implementations fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek Ext4: handle SEEK_HOLE/SEEK_DATA generically Btrfs: implement our own ->llseek fs: add SEEK_HOLE and SEEK_DATA flags reiserfs: make reiserfs default to barrier=flush ... Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new shrinker callout for the inode cache, that clashed with the xfs code to start the periodic workers later.
2011-07-22Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds2-125/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n iommu/amd: Don't use MSI address range for DMA addresses iommu/amd: Move missing parts to drivers/iommu iommu: Move iommu Kconfig entries to submenu x86/ia64: intel-iommu: move to drivers/iommu/ x86: amd_iommu: move to drivers/iommu/ msm: iommu: move to drivers/iommu/ drivers: iommu: move to a dedicated folder x86/amd-iommu: Store device alias as dev_data pointer x86/amd-iommu: Search for existind dev_data before allocting a new one x86/amd-iommu: Allow dev_data->alias to be NULL x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines x86/amd-iommu: Store ATS state in dev_data x86/amd-iommu: Store devid in dev_data x86/amd-iommu: Introduce global dev_data_list x86/amd-iommu: Remove redundant device_flush_dte() calls iommu-api: Add missing header file Fix up trivial conflicts (independent additions close to each other) in drivers/Makefile and include/linux/pci.h
2011-07-20devtmpfs: get rid of bogus mkdir in create_path()Al Viro1-24/+18
We do _NOT_ want to mkdir the path itself - we are preparing to mknod it, after all. Normally it'll fail with -ENOENT and just do nothing, but if somebody has created the parent in the meanwhile, we'll get buggered... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20switch devtmpfs to kern_path_create()Al Viro1-47/+36
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20switch devtmpfs object creation/removal to separate kernel threadAl Viro1-73/+149
... and give it a namespace where devtmpfs would be mounted on root, thus avoiding abuses of vfs_path_lookup() (it was never intended to be used with LOOKUP_PARENT). Games with credentials are also gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-15Merge branch 'pm-runtime' into for-linusRafael J. Wysocki3-51/+67
* pm-runtime: OMAP: PM: disable idle on suspend for GPIO and UART OMAP: PM: omap_device: add API to disable idle on suspend OMAP: PM: omap_device: add system PM methods for PM domain handling OMAP: PM: omap_device: conditionally use PM domain runtime helpers PM / Runtime: Add new helper function: pm_runtime_status_suspended() PM / Runtime: Consistent utilization of deferred_resume PM / Runtime: Prevent runtime_resume from racing with probe PM / Runtime: Replace "run-time" with "runtime" in documentation PM / Runtime: Improve documentation of enable, disable and barrier PM: Limit race conditions between runtime PM and system sleep (v2) PCI / PM: Detect early wakeup in pci_pm_prepare() PM / Runtime: Return special error code if runtime PM is disabled PM / Runtime: Update documentation of interactions with system sleep
2011-07-15Merge branch 'pm-domains' into for-linusRafael J. Wysocki6-124/+1524
* pm-domains: (33 commits) ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active PM / Domains: Take .power_off() error code into account ARM / shmobile: Use genpd_queue_power_off_work() ARM / shmobile: Use pm_genpd_poweroff_unused() PM / Domains: Introduce function to power off all unused PM domains PM / Domains: Queue up power off work only if it is not pending PM / Domains: Improve handling of wakeup devices during system suspend PM / Domains: Do not restore all devices on power off error PM / Domains: Allow callbacks to execute all runtime PM helpers PM / Domains: Do not execute device callbacks under locks PM / Domains: Make failing pm_genpd_prepare() clean up properly PM / Domains: Set device state to "active" during system resume ARM: mach-shmobile: sh7372 A3RV requires A4LC PM / Domains: Export pm_genpd_poweron() in header ARM: mach-shmobile: sh7372 late pm domain off ARM: mach-shmobile: Runtime PM late init callback ARM: mach-shmobile: sh7372 D4 support ARM: mach-shmobile: sh7372 A4MP support ARM: mach-shmobile: sh7372: make sure that fsi is peripheral of spu2 ARM: mach-shmobile: sh7372 A3SG support ...
2011-07-15PM: Add "RTC" to PM trace time stamps to avoid confusionRafael J. Wysocki1-1/+1
Some users are apparently confused by dmesg output from read_magic_time(), which looks like "real" time and date. Add the "RTC" string to time stamps printed by read_magic_time() to avoid that confusion. Reported-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15PM / OPP: Introduce function to free cpufreq tableNishanth Menon1-0/+17
cpufreq table allocated by opp_init_cpufreq_table is better freed by OPP layer itself. This allows future modifications to the table handling to be transparent to the users. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-14PM / Domains: Take .power_off() error code into accountRafael J. Wysocki1-2/+10
Currently pm_genpd_poweroff() discards error codes returned by the PM domain's .power_off() callback, because it's safer to always regard the domain as inaccessible to drivers after a failing .power_off(). Still, there are situations in which the low-level code may want to indicate that it doesn't want to power off the domain, so allow it to do that by returning -EBUSY from .power_off(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-14ARM / shmobile: Use genpd_queue_power_off_work()Rafael J. Wysocki1-1/+1
Make pd_power_down_a3rv() use genpd_queue_power_off_work() to queue up the powering off of the A4LC domain to avoid queuing it up when it is pending. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-13PM / Domains: Introduce function to power off all unused PM domainsRafael J. Wysocki1-0/+21
Add a new function pm_genpd_poweroff_unused() queuing up the execution of pm_genpd_poweroff() for every initialized generic PM domain. Calling it will cause every generic PM domain without devices in use to be powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-12mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a headerBenjamin Herrenschmidt1-1/+0
The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c files, and I need it in a third one to fix a powerpc bug, so let's first move it into a header Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2011-07-12PM / Domains: Queue up power off work only if it is not pendingRafael J. Wysocki1-1/+14
In theory it is possible that pm_genpd_poweroff() for two different subdomains of the same parent domain will attempt to queue up the execution of pm_genpd_poweroff() for the parent twice in a row. This would lead to unpleasant consequences, so prevent it from happening by checking if genpd->power_off_work is pending before attempting to queue it up. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Improve handling of wakeup devices during system suspendRafael J. Wysocki1-0/+30
Kevin points out that if there's a device that can wake up the system from sleep states, but it doesn't generate wakeup signals by itself (they are generated on its behalf by other parts of the system) and it currently is not enabled to wake up the system (that is, device_may_wakeup() returns "false" for it), we may need to change its wakeup settings during system suspend (for example, the device might have been configured to signal remote wakeup from the system's working state, as needed by runtime PM). Therefore the generic PM domains code should invoke the system suspend callbacks provided by the device's driver, which it doesn't do if the PM domain is powered off during the system suspend's "prepare" stage. This is a valid point. Moreover, this code also should make sure that system wakeup devices that are enabled to wake up the system from sleep states and have to remain active for this purpose are not suspended while the system is in a sleep state. To avoid the above issues, make the generic PM domains' .prepare() routine, pm_genpd_prepare(), force runtime resume of devices whose system wakeup settings may need to be changed during system suspend or that should remain active while the system is in a sleep state to be able to wake it up from that state. Reported-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Do not restore all devices on power off errorRafael J. Wysocki1-9/+4
Since every device in a PM domain has its own need_restore flag, which is set by __pm_genpd_save_device(), there's no need to walk the domain's device list and restore all devices on an error from one of the drivers' .runtime_suspend() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Allow callbacks to execute all runtime PM helpersRafael J. Wysocki1-45/+99
A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Do not execute device callbacks under locksRafael J. Wysocki1-71/+178
Currently, the .start_device() and .stop_device() callbacks from struct generic_pm_domain() as well as the device drivers' runtime PM callbacks used by the generic PM domains code are executed under the generic PM domain lock. This, unfortunately, is prone to deadlocks, for example if a device and its parent are boths members of the same PM domain. For this reason, it would be better if the PM domains code didn't execute device callbacks under the lock. Rework the locking in the generic PM domains code so that the lock is dropped for the execution of device callbacks. To this end, introduce PM domains states reflecting the current status of a PM domain and such that the PM domain lock cannot be acquired if the status is GPD_STATE_BUSY. Make threads attempting to acquire a PM domain's lock wait until the status changes to either GPD_STATE_ACTIVE or GPD_STATE_POWER_OFF. This change by itself doesn't fix the deadlock problem mentioned above, but the mechanism introduced by it will be used for for this purpose by a subsequent patch. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Make failing pm_genpd_prepare() clean up properlyRafael J. Wysocki1-1/+11
If pm_generic_prepare() in pm_genpd_prepare() returns error code, the PM domains counter of "prepared" devices should be decremented and its suspend_power_off flag should be reset if this counter drops down to zero. Otherwise, the PM domain runtime PM code will not handle the domain correctly (it will permanently think that system suspend is in progress). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Domains: Set device state to "active" during system resumeRafael J. Wysocki1-0/+2
The runtime PM status of devices in a power domain that is not powered off in pm_genpd_complete() should be set to "active", because those devices are operational at this point. Some of them may not be in use, though, so make pm_genpd_complete() call pm_runtime_idle() in addition to pm_runtime_set_active() for each of them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11PM: Reintroduce dropped call to check_wakeup_irqsColin Cross1-0/+8
Patch 2e711c04dbbf7a7732a3f7073b1fc285d12b369d (PM: Remove sysdev suspend, resume and shutdown operations) deleted sysdev_suspend(), which was being relied on to call check_wakeup_irqs() in suspend. If check_wakeup_irqs() is not called, wake interrupts that are pending when suspend is entered may be lost. It also breaks IRQCHIP_MASK_ON_SUSPEND, which is handled in check_wakeup_irqs(). This patch adds a call to check_wakeup_irqs() in syscore_suspend(), similar to what was deleted in sysdev_suspend(). Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10PM / Domains: Export pm_genpd_poweron() in headerMagnus Damm1-1/+1
Allow SoC-specific code to call pm_genpd_poweron(). Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-08PM / Runtime: Consistent utilization of deferred_resumeShuoX Liu1-1/+1
dev->power.deferred_resume is used as a bool typically, so change one assignment to false from 0, like other places. Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
2011-07-08driver core: Add ability for arch code to setup pdev_archdataKumar Gala1-0/+21
On some architectures we need to setup pdev_archdata before we add the device. Waiting til a bus_notifier is too late since we might need the pdev_archdata in the bus notifier. One example is setting up of dma_mask pointers such that it can be used in a bus_notifier. We add weak noop version of arch_setup_pdev_archdata() and allow the arch code to override with access the full definitions of struct device, struct platform_device, and struct pdev_archdata. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07Merge branch 'iommu-3.1' of ↵Ingo Molnar2-125/+0
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into core/iommu
2011-07-06PM / Runtime: Prevent runtime_resume from racing with probeAlan Stern1-1/+5
This patch (as1475) adds device_lock() and device_unlock() calls to the store methods for the power/control and power/autosuspend_delay_ms sysfs attribute files. We don't want badly timed writes to these files to cause runtime_resume callbacks to occur while a driver is being probed for a device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-06PM / Runtime: Replace "run-time" with "runtime" in documentationRafael J. Wysocki1-33/+33
The runtime PM documentation and kerneldoc comments sometimes spell "runtime" with a dash (i.e. "run-time"). Replace all of those instances with "runtime" to make the naming consistent. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-06PM: Limit race conditions between runtime PM and system sleep (v2)Rafael J. Wysocki1-12/+23
One of the roles of the PM core is to prevent different PM callbacks executed for the same device object from racing with each other. Unfortunately, after commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow pm_runtime_suspend() to succeed during system suspend) runtime PM callbacks may be executed concurrently with system suspend/resume callbacks for the same device. The main reason for commit e8665002477f0278f84f898145b1f141ba26ee26 was that some subsystems and device drivers wanted to use runtime PM helpers, pm_runtime_suspend() and pm_runtime_put_sync() in particular, for carrying out the suspend of devices in their .suspend() callbacks. However, as it's been determined recently, there are multiple reasons not to do so, inlcuding: * The caller really doesn't control the runtime PM usage counters, because user space can access them through sysfs and effectively block runtime PM. That means using pm_runtime_suspend() or pm_runtime_get_sync() to suspend devices during system suspend may or may not work. * If a driver calls pm_runtime_suspend() from its .suspend() callback, it causes the subsystem's .runtime_suspend() callback to be executed, which leads to the call sequence: subsys->suspend(dev) driver->suspend(dev) pm_runtime_suspend(dev) subsys->runtime_suspend(dev) recursive from the subsystem's point of view. For some subsystems that may actually work (e.g. the platform bus type), but for some it will fail in a rather spectacular fashion (e.g. PCI). In each case it means a layering violation. * Both the subsystem and the driver can provide .suspend_noirq() callbacks for system suspend that can do whatever the .runtime_suspend() callbacks do just fine, so it really isn't necessary to call pm_runtime_suspend() during system suspend. * The runtime PM's handling of wakeup devices is usually different from the system suspend's one, so .runtime_suspend() may simply be inappropriate for system suspend. * System suspend is supposed to work even if CONFIG_PM_RUNTIME is unset. * The runtime PM workqueue is frozen before system suspend, so if whatever the driver is going to do during system suspend depends on it, that simply won't work. Still, there is a good reason to allow pm_runtime_resume() to succeed during system suspend and resume (for instance, some subsystems and device drivers may legitimately use it to ensure that their devices are in full-power states before suspending them). Moreover, there is no reason to prevent runtime PM callbacks from being executed in parallel with the system suspend/resume .prepare() and .complete() callbacks and the code removed by commit e8665002477f0278f84f898145b1f141ba26ee26 went too far in this respect. On the other hand, runtime PM callbacks, including .runtime_resume(), must not be executed during system suspend's "late" stage of suspending devices and during system resume's "early" device resume stage. Taking all of the above into consideration, make the PM core acquire a runtime PM reference to every device and resume it if there's a runtime PM resume request pending right before executing the subsystem-level .suspend() callback for it. Make the PM core drop references to all devices right after executing the subsystem-level .resume() callbacks for them. Additionally, make the PM core disable the runtime PM framework for all devices during system suspend, after executing the subsystem-level .suspend() callbacks for them, and enable the runtime PM framework for all devices during system resume, right before executing the subsystem-level .resume() callbacks for them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Runtime: Return special error code if runtime PM is disabledRafael J. Wysocki1-4/+5
Some callers of pm_runtime_get_sync() and other runtime PM helper functions, scsi_autopm_get_host() and scsi_autopm_get_device() in particular, need to distinguish error codes returned when runtime PM is disabled (i.e. power.disable_depth is nonzero for the given device) from error codes returned in other situations. For this reason, make the runtime PM helper functions return -EACCES when power.disable_depth is nonzero and ensure that this error code won't be returned by them in any other circumstances. Modify scsi_autopm_get_host() and scsi_autopm_get_device() to check the error code returned by pm_runtime_get_sync() and ignore -EACCES. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02PM: Rename clock management functionsRafael J. Wysocki1-94/+94
The common PM clock management functions may be used for system suspend/resume as well as for runtime PM, so rename them accordingly. Modify kerneldoc comments describing these functions and kernel messages printed by them, so that they refer to power management in general rather that to runtime PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM: Allow the clocks management code to be used during system suspendRafael J. Wysocki1-1/+59
The common clocks management code in drivers/base/power/clock_ops.c is going to be used during system-wide power transitions as well as for runtime PM, so it shouldn't depend on CONFIG_PM_RUNTIME. However, the suspend/resume functions provided by it for CONFIG_PM_RUNTIME unset, to be used during system-wide power transitions, should not behave in the same way as their counterparts defined for CONFIG_PM_RUNTIME set, because in that case the clocks are managed differently at run time. The names of the functions still contain the word "runtime" after this change, but that is going to be modified by a separate patch later. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Wakeup devices support for system sleep transitionsRafael J. Wysocki1-0/+8
There is the problem how to handle devices set up to wake up the system from sleep states during system-wide power transitions. In some cases, those devices can be turned off entirely, because the wakeup signals will be generated on their behalf anyway. In some other cases, they will generate wakeup signals if their clocks are stopped, but only if power is not removed from them. Finally, in some cases, they can only generate wakeup signals if power is not removed from them and their clocks are enabled. To allow platform-specific code to decide whether or not to put wakeup devices (and their PM domains) into low-power state during system-wide transitions, such as system suspend, introduce a new generic PM domain callback, .active_wakeup(), that will be used during the "noirq" phase of system suspend and hibernation (after image creation) to decide what to do with wakeup devices. Specifically, if this callback is present and returns "true", the generic PM domain code will not execute .stop_device() for the given wakeup device and its PM domain won't be powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: System-wide transitions support for generic domains (v5)Rafael J. Wysocki1-15/+536
Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Move code from under #ifdef CONFIG_PM_RUNTIME (v2)Rafael J. Wysocki1-55/+65
There is some code in drivers/base/power/domain.c that will be useful for both runtime PM and system-wide power transitions, so make it depend on CONFIG_PM instead of CONFIG_PM_RUNTIME. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM: Introduce generic "noirq" callback routines for subsystems (v2)Rafael J. Wysocki1-15/+83
Introduce generic "noirq" power management callback routines for subsystems in addition to the "regular" generic PM callback routines. The new routines will be used, among other things, for implementing system-wide PM transitions support for generic PM domains. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02PM / Domains: Support for generic I/O PM domains (v8)Rafael J. Wysocki2-0/+495
Introduce common headers, helper functions and callbacks allowing platforms to use simple generic power domains for runtime power management. Introduce struct generic_pm_domain to be used for representing power domains that each contain a number of devices and may be parent domains or subdomains with respect to other power domains. Among other things, this structure includes callbacks to be provided by platforms for performing specific tasks related to power management (i.e. ->stop_device() may disable a device's clocks, while ->start_device() may enable them, ->power_off() is supposed to remove power from the entire power domain and ->power_on() is supposed to restore it). Introduce functions that can be used as power domain runtime PM callbacks, pm_genpd_runtime_suspend() and pm_genpd_runtime_resume(), as well as helper functions for the initialization of a power domain represented by a struct generic_power_domain object, adding a device to or removing a device from it and adding or removing subdomains. Introduce configuration option CONFIG_PM_GENERIC_DOMAINS to be selected by the platforms that want to use the new code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Rename struct dev_power_domain to struct dev_pm_domainRafael J. Wysocki3-28/+28
The naming convention used by commit 7538e3db6e015e890825fbd9f86599b (PM: Add support for device power domains), which introduced the struct dev_power_domain type for representing device power domains, evidently confuses some developers who tend to think that objects of this type must correspond to "power domains" as defined by hardware, which is not the case. Namely, at the kernel level, a struct dev_power_domain object can represent arbitrary set of devices that are mutually dependent power management-wise and need not belong to one hardware power domain. To avoid that confusion, rename struct dev_power_domain to struct dev_pm_domain and rename the related pointers in struct device and struct pm_clk_notifier_block from pwr_domain to pm_domain. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-01driver core: add more help description for "path to uevent helper"Márton Németh1-0/+5
The kernel configuration UEVENT_HELPER_PATH is a string to the uevent helper program. Add more description about how to disable this feature and how to enable it again during runtime. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01driver-core: modify FIRMWARE_IN_KERNEL help messagematt mooney1-4/+4
The help message for the configuration variable was inconsistent with the way "make firmware_install" really works. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01driver-core: Kconfig grammar corrections in firmware configurationmatt mooney1-30/+29
Fix some grammatical errors and reword a few sentences. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>