summaryrefslogtreecommitdiffstats
path: root/drivers/base
AgeCommit message (Collapse)AuthorFilesLines
2019-03-22Merge tag 'devprop-5.1-rc2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static
2019-03-19PM / Domains: Avoid a potential deadlockJiada Wang1-7/+6
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19drivers: base: swnode: Make two functions staticYueHaibing1-2/+2
Fix sparse warning: drivers/base/swnode.c:475:22: warning: symbol 'software_node_get_parent' was not declared. Should it be static? drivers/base/swnode.c:484:22: warning: symbol 'software_node_get_next_child' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-16Merge tag 'devdax-for-5.1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-03-14Merge tag 'pm-5.1-rc1-2' of ↵Linus Torvalds9-53/+52
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previously merged power management material for 5.1-rc1 with one cpupower utility update that wasn't pushed earlier due to unfortunate timing. Specifics: - Fix registration of new cpuidle governors partially broken during the 5.0 development cycle by mistake (Rafael Wysocki). - Avoid integer overflows in the menu cpuidle governor by making it discard the overflowing data points upfront (Rafael Wysocki). - Fix minor mistake in the recent update of the iowait boost computation in the intel_pstate driver (Rafael Wysocki). - Drop incorrect __init annotation from one function in the pxa2xx cpufreq driver (Arnd Bergmann). - Fix the operating performance points (OPP) framework initialization for devices in multiple power domains if only one of them is scalable (Rajendra Nayak). - Fix mistake in dev_pm_opp_set_rate() which causes it to skip updating the performance state if the new frequency is the same as the old one (Viresh Kumar). - Rework the cancellation of wakeup source timers to avoid potential issues with it and do some cleanups unlocked by that change (Viresh Kumar, Rafael Wysocki). - Clean up the code computing the active/suspended time of devices in the PM-runtime framework after recent changes (Ulf Hansson). - Make the power management infrastructure code use pr_fmt() consistently (Joe Perches). - Clean up the generic power domains (genpd) framework somewhat (Aisheng Dong). - Improve kerneldoc comments for two functions in the cpufreq core (Rafael Wysocki). - Fix typo in a PM QoS file description comment (Aisheng Dong). - Update the handling of CPU boost frequencies in the cpupower utility (Abhishek Goel)" * tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: governor: Add new governors to cpuidle_governors again cpufreq: intel_pstate: Fix up iowait_boost computation PM / OPP: Update performance state when freq == old_freq PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor OPP: Fix handling of multiple power domains PM / QoS: Fix typo in file description cpufreq: pxa2xx: remove incorrect __init annotation PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time PM: Add and use pr_fmt() cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() cpuidle: menu: Avoid overflows when computing variance tools/power/cpupower: Display boost frequency separately
2019-03-14Merge branch 'pm-domains'Rafael J. Wysocki2-5/+4
* pm-domains: PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor
2019-03-14Merge branches 'pm-core', 'pm-sleep' and 'pm-qos'Rafael J. Wysocki5-32/+25
* pm-core: PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time * pm-sleep: PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation * pm-qos: PM / QoS: Fix typo in file description
2019-03-12PM / wakeup: Drop wakeup_source_drop()Rafael J. Wysocki1-17/+1
After commit d856f39ac1cc ("PM / wakeup: Rework wakeup source timer cancellation") wakeup_source_drop() is a trivial wrapper around __pm_relax() and it has no users except for wakeup_source_destroy() and wakeup_source_trash() which also has no users, so drop it along with the latter and make wakeup_source_destroy() call __pm_relax() directly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-03-12PM / wakeup: Rework wakeup source timer cancellationViresh Kumar1-1/+7
If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11PM / domains: Remove one unnecessary blank lineAisheng Dong1-1/+0
Remove one unnecessary blank line Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11PM / Domains: Return early for all errors in _genpd_power_off()Aisheng Dong1-3/+3
It is strange to only return early for -EBUSY state and left other errors to be still measured execution time. As for error cases, the elapsed_ns computed actually is not quite accurate and meaningful for governor to use. So let's simply return for all error cases. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11PM / Domains: Improve warn for multiple states but no governorAisheng Dong1-1/+1
It's possible a PM domain defines only one state and it does not need a governor to work. For such case, a warning actually is not necessary. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11PM / QoS: Fix typo in file descriptionAisheng Dong1-1/+1
Fix a typo in the file description comment. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-77/+0
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-07PM-runtime: Call pm_runtime_active|suspended_time() from sysfsUlf Hansson2-11/+3
Avoid the open-coding of the accounted time acquisition in runtime_active|suspend_time_show() and make them call pm_runtime_active|suspended_time() instead. Note that this change also indirectly avoids holding dev->power.lock around the do_div() computation and the sprintf() call which is an additional improvement. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07PM-runtime: Consolidate code to get active/suspended timeUlf Hansson2-2/+13
In a step to consolidate the code for fetching the PM-runtime active/suspended time for a device, add a common function for that and make the existing pm_runtime_suspended_time() call it. Also add a corresponding pm_runtime_active_time() calling the new common function. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07PM: Add and use pr_fmt()Joe Perches4-16/+23
Prefix all printk/pr_<level> messages with "PM: " to make the logging a bit more consistent. Miscellanea: o Convert a few printks to pr_<level> o Whitespace to align to open parentheses o Remove embedded "PM: " from pr_debugs as pr_fmt adds it Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds1-3/+59
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-03-06Merge tag 'driver-core-5.1-rc1' of ↵Linus Torvalds16-242/+752
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds1-11/+195
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-03-06Merge tag 'devprop-5.1-rc1' of ↵Linus Torvalds1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Fix the length value used in the PROPERTY_ENTRY_STRING() macro and make software nodes use the get_named_child_node() fwnode callback (Heikki Krogerus)" * tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: Implement get_named_child_node fwnode callback device property: Fix the length used in PROPERTY_ENTRY_STRING()
2019-03-06Merge tag 'pm-5.1-rc1' of ↵Linus Torvalds8-40/+89
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are PM-runtime framework changes to use ktime instead of jiffies for accounting, new PM core flag to mark devices that don't need any form of power management, cpuidle updates including driver API documentation and a new governor, cpufreq updates including a new driver for Armada 8K, thermal cleanups and more, some energy-aware scheduling (EAS) enabling changes, new chips support in the intel_idle and RAPL drivers and assorted cleanups in some other places. Specifics: - Update the PM-runtime framework to use ktime instead of jiffies for accounting (Thara Gopinath, Vincent Guittot) - Optimize the autosuspend code in the PM-runtime framework somewhat (Ladislav Michl) - Add a PM core flag to mark devices that don't need any form of power management (Sudeep Holla) - Introduce driver API documentation for cpuidle and add a new cpuidle governor for tickless systems (Rafael Wysocki) - Add Jacobsville support to the intel_idle driver (Zhang Rui) - Clean up a cpuidle core header file and the cpuidle-dt and ACPI processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam) - Add new cpufreq driver for Armada 8K (Gregory Clement) - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit Kucheria) - Add support for light-weight tear-down and bring-up of CPUs to the cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar) - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling auto-registration to the cpufreq core and use it in multiple cpufreq drivers (Amit Kucheria) - Fix some minor issues and do some cleanups in the davinci, e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel, Taniya Das, Viresh Kumar) - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng Wang) - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu, Rafael Wysocki) - Clean up multiple cpufreq drivers (Yangtao Li) - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas Bulwahn) - Add support for exposing the Energy Model via debugfs and make multiple cpufreq drivers register an Energy Model to support energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias Kaehlcke) - Add Ice Lake mobile and Jacobsville support to the Intel RAPL power-capping driver (Gayatri Kammela, Zhang Rui) - Add a power estimation helper to the operating performance points (OPP) framework and clean up a core function in it (Quentin Perret, Viresh Kumar) - Make minor improvements in the generic power domains (genpd), OPP and system suspend frameworks and in the PM core (Aditya Pakki, Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)" * tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions PM / core: Add support to skip power management in device/driver model cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars powercap/intel_rapl: add Ice Lake mobile ACPI / processor: Set P_LVL{2,3} idle state descriptions cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon ..
2019-03-04Merge tag 'regmap-v5.1' of ↵Linus Torvalds2-5/+96
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "There are only two changes here: - fix for conflicting attributes on the rbtree node structure - implementation of main status register support in the interrupt code which supports chips that have a register to cut down on the number of per-interrupt status registers that need to be checked when handling interrupts" * tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Remove attribute packed from struct 'regcache_rbtree_node' regmap: regmap-irq: Add main status register support
2019-03-04Merge branches 'pm-core', 'pm-sleep', 'pm-qos', 'pm-domains' and 'pm-em'Rafael J. Wysocki8-40/+89
* pm-core: PM / core: Add support to skip power management in device/driver model PM / suspend: Print debug messages for device using direct-complete PM-runtime: update time accounting only when enabled PM-runtime: Switch accounting over to ktime_get_mono_fast_ns() PM-runtime: Optimize pm_runtime_autosuspend_expiration() PM-runtime: Replace jiffies-based accounting with ktime-based accounting PM-runtime: update accounting_timestamp on enable PM: clock_ops: fix missing clk_prepare() return value check drm/i915: Move on the new pm runtime interface PM-runtime: Add new interface to get accounted time * pm-sleep: PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event() * pm-qos: PM: QoS: no need to check return value of debugfs_create functions * pm-domains: PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name() PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name() PM: domains: no need to check return value of debugfs_create functions * pm-em: PM / EM: Expose the Energy Model in debugfs
2019-03-01driver core: platform: remove misleading err_alloc labelJohannes Berg1-3/+1
In platform_device_register_full() the err_alloc label is misleading, we only ever jump to it if the pdev is NULL, but it then proceeds to free it, which is a no-op. Remove the label and simply exit the function immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28device-dax: "Hotplug" persistent memory for use like normal RAMDave Hansen1-0/+1
This is intended for use with NVDIMMs that are physically persistent (physically like flash) so that they can be used as a cost-effective RAM replacement. Intel Optane DC persistent memory is one implementation of this kind of NVDIMM. Currently, a persistent memory region is "owned" by a device driver, either the "Direct DAX" or "Filesystem DAX" drivers. These drivers allow applications to explicitly use persistent memory, generally by being modified to use special, new libraries. (DIMM-based persistent memory hardware/software is described in great detail here: Documentation/nvdimm/nvdimm.txt). However, this limits persistent memory use to applications which *have* been modified. To make it more broadly usable, this driver "hotplugs" memory into the kernel, to be managed and used just like normal RAM would be. To make this work, management software must remove the device from being controlled by the "Device DAX" infrastructure: echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind and then tell the new driver that it can bind to the device: echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id After this, there will be a number of new memory sections visible in sysfs that can be onlined, or that may get onlined by existing udev-initiated memory hotplug rules. This rebinding procedure is currently a one-way trip. Once memory is bound to "kmem", it's there permanently and can not be unbound and assigned back to device_dax. The kmem driver will never bind to a dax device unless the device is *explicitly* bound to the driver. There are two reasons for this: One, since it is a one-way trip, it can not be undone if bound incorrectly. Two, the kmem driver destroys data on the device. Think of if you had good data on a pmem device. It would be catastrophic if you compile-in "kmem", but leave out the "device_dax" driver. kmem would take over the device and write volatile data all over your good data. This inherits any existing NUMA information for the newly-added memory from the persistent memory device that came from the firmware. On Intel platforms, the firmware has guarantees that require each socket's persistent memory to be in a separate memory-only NUMA node. That means that this patch is not expected to create NUMA nodes, but will simply hotplug memory into existing nodes. Because NUMA nodes are created, the existing NUMA APIs and tools are sufficient to create policies for applications or memory areas to have affinity for or an aversion to using this memory. There is currently some metadata at the beginning of pmem regions. The section-size memory hotplug restrictions, plus this small reserved area can cause the "loss" of a section or two of capacity. This should be fixable in follow-on patches. But, as a first step, losing 256MB of memory (worst case) out of hundreds of gigabytes is a good tradeoff vs. the required code to fix this up precisely. This calculation is also the reason we export memory_block_size_bytes(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: linux-nvdimm@lists.01.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Huang Ying <ying.huang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-26platform: set of_node in platform_device_register_full()Mans Rullgard1-0/+2
If the provided fwnode is an OF node, set dev.of_node as well. Also add an of_node_reused flag to struct platform_device_info and copy this to the new device. This is needed to avoid pinctrl settings being requested twice. See 4e75e1d7dac9 ("driver core: add helper to reuse a device-tree node") for a longer explanation. Some drivers are just shims that create extra "glue" devices with the DT device as parent and have the real driver bind to these. In these cases, the glue device needs to get a reference to the original DT node in order for the main driver to access properties and child nodes. For example, the sunxi-musb driver creates such a glue device using platform_device_register_full(). Consequently, devices attached to this USB interface don't get associated with DT nodes, if present, the way they do with EHCI. This change will allow sunxi-musb and similar drivers to easily propagate the DT node to child devices as required. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26firmware: hardcode the debug message for -ENOENTJohn Zhao1-4/+4
When no file /path was found, the error code of -ENOENT enumerated in errno-base.h, is returned. Stating clearly that the file was not found is much more useful for debugging, So let's be explicit about that. Signed-off-by: John Zhao <yuankuiz@codeaurora.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-24Merge back earlier PM core material for v5.1.Rafael J. Wysocki5-28/+84
2019-02-22drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()Bartosz Golaszewski1-0/+2
We only build devm_ioremap_resource() if HAS_IOMEM is selected, so this dependency must cascade down to devm_platform_ioremap_resource(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21drivers: provide devm_platform_ioremap_resource()Bartosz Golaszewski1-0/+18
There are currently 1200+ instances of using platform_get_resource() and devm_ioremap_resource() together in the kernel tree. This patch wraps these two calls in a single helper. Thanks to that we don't have to declare a local variable for struct resource * and can omit the redundant argument for resource type. We also have one function call less. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21PM-runtime: Fix deadlock when canceling hrtimerVincent Guittot1-1/+1
When rpm_resume() desactivates the autosuspend timer, it should only try to cancel hrtimer but not wait for the handler to finish, because both rpm_resume() and pm_suspend_timer_fn() take the power.lock. A deadlock is possible as follows: CPU0 CPU1 rpm_resume() spin_lock_irqsave pm_suspend_timer_fn() spin_lock_irqsave pm_runtime_deactivate_timer() hrtimer_cancel() It is sufficient to call hrtimer_try_to_cancel() from pm_runtime_deactivate_timer(), because dev->power.timer_expires reset to 0 by it, so use that function instead of hrtimer_cancel(). Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") Reported-by: Sunzhaosheng Sun(Zhaosheng) <sunzhaosheng@hisilicon.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-20Pull in char-misc-next from GregDaniel Vetter1-4/+2
We need 32ea33a04484 ("mei: bus: export to_mei_cl_device for mei client devices drivers") for the mei-hdcp patches. References: https://lkml.org/lkml/2019/2/19/356 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2019-02-20dma-mapping: move CONFIG_DMA_CMA to kernel/dma/KconfigChristoph Hellwig1-77/+0
This is where all the related code already lives. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20driver core: Fix PM-runtime for links added during consumer probeRafael J. Wysocki2-25/+8
Commit 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") introduced a regression that causes suppliers to be suspended prematurely for device links added during consumer driver probe if the initial PM-runtime status of the consumer is "suspended" and the consumer is resumed after adding the link and before pm_runtime_put_suppliers() is called. In that case, pm_runtime_put_suppliers() will drop the rpm_active refcount for the link by one and (since rpm_active is equal to two after the preceding consumer resume) the supplier's PM-runtime usage counter will be decremented, which may cause the supplier to suspend even though the consumer's PM-runtime status is "active". For this reason, partially revert commit 4c06c4e6cf63 as the problem it tried to fix needs to be addressed somewhat differently, and change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so that the latter only drops rpm_active references acquired by the former. [This requires adding a new field to struct device_link, but I coulnd't find a cleaner way to address the issue that would work in all cases.] This causes pm_runtime_put_suppliers() to effectively ignore device links added during consumer probe, so device_link_add() doesn't need to worry about ensuring that suppliers will remain active after pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE set and it only needs to bump up rpm_active by one for those links, so pm_runtime_active_link() is not necessary any more. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19drivers/component: kerneldoc polishDaniel Vetter1-7/+7
Polish the kerneldoc a bit with suggestions from Randy. v2: Randy found another typo: s/compent/component/ Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ramalingam C <ramalingam.c@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19PM / core: Add support to skip power management in device/driver modelSudeep Holla3-0/+14
All device objects in the driver model contain fields that control the handling of various power management activities. However, it's not always useful. There are few instances where pseudo devices are added to the model just to take advantage of many other features like kobjects, udev events, and so on. One such example is cpu devices and their caches. The sysfs for the cpu caches are managed by adding devices with cpu as the parent in cpu_device_create() when secondary cpu is brought online. Generally when the secondary CPUs are hotplugged back in as part of resume from suspend-to-ram, we call cpu_device_create() from the cpu hotplug state machine while the cpu device associated with that CPU is not yet ready to be resumed as the device_resume() call happens bit later. It's not really needed to set the flag is_prepared for cpu devices as they are mostly pseudo device and hotplug framework deals with state machine and not managed through the cpu device. This often results in annoying warning when resuming: Enabling non-boot CPUs ... CPU1: Booted secondary processor cache: parent cpu1 should not be sleeping CPU1 is up CPU2: Booted secondary processor cache: parent cpu2 should not be sleeping CPU2 is up .... and so on. So in order to fix these kind of errors, we could just completely avoid doing any power management related initialisations and operations if they are not used by these devices. Add no_pm flags to indicate that the device doesn't require any sort of PM activities and all of them can be completely skipped. We can use the same flag to also avoid adding not used *power* sysfs entries for these devices. For now, lets use this for cpu cache devices. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-15PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name()Douglas Anderson1-1/+1
As of the patch ("PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()") it's clear that the name in dev_pm_domain_attach_by_name() can be const. Mark it as so. This allows drivers to pass in a name that was declared "const" in a driver. Fixes: 27dceb81f445 ("PM / Domains: Introduce dev_pm_domain_attach_by_name()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-15PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()Douglas Anderson1-1/+1
The genpd_dev_pm_attach_by_name() simply takes the name and passes it to of_property_match_string() where the argument is "const char *". Adding a const here allows a later patch to add a const to dev_pm_domain_attach_by_name() which allows drivers to pass in a name that was declared "const" in a driver. Fixes: 5d6be70add65 ("PM / Domains: Introduce option to attach a device by name to genpd") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-14software node: Implement get_named_child_node fwnode callbackHeikki Krogerus1-0/+23
This makes it possible to support drivers that use fwnode_get_named_child_node() and device_get_named_child_node() functions. The node name is for now taken from a device property named "name". That mimics the old style of naming of the nodes in devicetree (though with modern flattened DT, the name is matched against the actual node-name, it used to be done with a property "name"). In Open Firmware DT the "name" property is also still being used. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-14device connection: Find device connections also from device graphsHeikki Krogerus1-3/+35
If connections between devices are described in OF graph or ACPI device graph, we can find them by using the fwnode_graph_*() functions. Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jun Li <jun.li@nxp.com> Tested-by: Jun Li <jun.li@nxp.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14device connection: Prepare support for firmware described connectionsHeikki Krogerus1-0/+24
When the connections are defined in firmware, struct device_connection will have the fwnode member pointing to the device node (struct fwnode_handle) of the requested device. The endpoint member for the device names will not be used at all in that case. Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jun Li <jun.li@nxp.com> Tested-by: Jun Li <jun.li@nxp.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14async: Add cmdline option to specify drivers to be async probedFeng Tang1-0/+24
Asynchronous driver probing can help much on kernel fastboot, and this option can provide a flexible way to optimize and quickly verify async driver probe. Also it will help in below cases: * Some driver actually covers several families of HWs, some of which could use async probing while others don't. So we can't simply turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this cmdline option, like igb driver async patch discussed at https://www.spinics.net/lists/netdev/msg545986.html * For SOC (System on Chip) with multiple spi or i2c controllers, most of the slave spi/i2c devices will be assigned with fixed controller number, while async probing may make those controllers get different index for each boot, which prevents those controller drivers to be async probed. For platforms not using these spi/i2c slave devices, they can use this cmdline option to benefit from the async probing. Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13PM / suspend: Print debug messages for device using direct-completeRafael J. Wysocki1-1/+3
Devices using the direct-complete optimization are not present it debug messages printed by the core device suspend and resume code, which sometimes makes it difficult to diagnose problems related to them, so add debug messages for those devices. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-13driver core: Fix possible supplier PM-usage counter imbalanceRafael J. Wysocki2-19/+29
If a stateless device link to a certain supplier with DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the consumer driver's probe callback, the supplier's PM-runtime usage counter will be nonzero after that which effectively causes the supplier to remain "always on" going forward. Namely, device_link_add() called to add the link invokes device_link_rpm_prepare() which notices that the consumer driver is probing, so it increments the supplier's PM-runtime usage counter with the assumption that the link will stay around until pm_runtime_put_suppliers() is called by driver_probe_device(), but if the link goes away before that point, the supplier's PM-runtime usage counter will remain nonzero. To prevent that from happening, first rework pm_runtime_get_suppliers() and pm_runtime_put_suppliers() to use the rpm_active refounts of device links and make the latter only drop rpm_active and the supplier's PM-runtime usage counter for each link by one, unless rpm_active is one already for it. Next, modify device_link_add() to bump up the new link's rpm_active refcount and the suppliers PM-runtime usage counter by two, to prevent pm_runtime_put_suppliers(), if it is called subsequently, from suspending the supplier prematurely (in case its PM-runtime usage counter goes down to 0 in there). Due to the way rpm_put_suppliers() works, this change does not affect runtime suspend of the consumer ends of new device links (or, generally, device links for which DL_FLAG_PM_RUNTIME has just been set). Fixes: e2f3cd831a28 ("driver core: Fix handling of runtime PM flags in device_link_add()") Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13PM-runtime: Fix __pm_runtime_set_status() race with runtime resumeRafael J. Wysocki1-6/+18
Commit 4080ab083000 ("PM-runtime: Take suppliers into account in __pm_runtime_set_status()") introduced a race condition that may trigger if __pm_runtime_set_status() is used incorrectly (that is, if it is called when PM-runtime is enabled for the target device and working). In that case, if the original PM-runtime status of the device is RPM_SUSPENDED, a runtime resume of the device may occur after __pm_runtime_set_status() has dropped its power.lock spinlock and before deactivating its suppliers, so the suppliers may be deactivated while the device is PM-runtime-active which may lead to functional issues. To avoid that, modify __pm_runtime_set_status() to check whether or not PM-runtime is enabled for the device before activating its suppliers (if the new status is RPM_ACTIVE) and either return an error if that's the case or increment the device's disable_depth counter to prevent PM-runtime from being enabled for it while the remaining part of the function is running (disable_depth is then decremented on the way out). Fixes: 4080ab083000 ("PM-runtime: Take suppliers into account in __pm_runtime_set_status()") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12driver: platform: Support parsing GpioInt 0 in platform_get_irq()Enrico Granata1-1/+14
ACPI 5 added support for GpioInt resources as a way to provide information about interrupts mediated via a GPIO controller. Several device buses (e.g. SPI, I2C) have support for retrieving an IRQ specified via this type of resource, and providing it directly to the driver as an IRQ number. This is not currently done for the platform drivers, as platform_get_irq() does not try to parse GpioInt() resources. This requires drivers to either have to support only one possible IRQ resource, or to have code in place to try both as a failsafe. While there is a possibility of ambiguity for devices that exposes multiple IRQs, it is easy and feasible to support the common case of devices that only expose one IRQ which would be of either type depending on the underlying system's architecture. This commit adds support for parsing a GpioInt resource in order to fulfill a request for the index 0 IRQ for a platform device. Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11Merge tag 'topic/component-typed-2019-02-11' of ↵Greg Kroah-Hartman1-11/+195
git://anongit.freedesktop.org/drm/drm-intel into driver-core-next Daniel writes: typed componented support + i915/snd-hda changes This is needed by the new MEI-HDCP support in i915, so will need to go in through drm and drivers-misc trees at least. * tag 'topic/component-typed-2019-02-11' of git://anongit.freedesktop.org/drm/drm-intel: i915/snd_hdac: I915 subcomponent for the snd_hdac components: multiple components for a device component: Add documentation
2019-02-11Merge 5.0-rc6 into driver-core-nextGreg Kroah-Hartman3-10/+14
We need the debugfs fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>