summaryrefslogtreecommitdiffstats
path: root/drivers/base/platform.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-07-03platform: Accept const propertiesJan Kiszka1-1/+1
Aligns us with device_add_properties, the function we call. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-05-25driver core: platform: fix race condition with driver_overrideAdrian Salido1-2/+9
The driver_override implementation is susceptible to race condition when different threads are reading vs storing a different driver override. Add locking to avoid race condition. Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'") Cc: stable@vger.kernel.org Signed-off-by: Adrian Salido <salidoa@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22of: Add function for generating a DT modalias with a newlineRob Herring1-1/+1
The modalias sysfs attr is lacking a newline for DT aliases on platform devices. The macio and ibmebus correctly add the newline, but open code it. Introduce a new function, of_device_modalias(), that fills the buffer with the modalias including the newline and update users of the old of_device_get_modalias function. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-22Merge tag 'driver-core-4.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "small" driver core patches for 4.11-rc1. Not much here, some firmware documentation and self-test updates, a debugfs code formatting issue, and a new feature for call_usermodehelper to make it more robust on systems that want to lock it down in a more secure way. All of these have been linux-next for a while now with no reported issues" * tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: handle null pointers while printing node name and path Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper() Make static usermode helper binaries constant kmod: make usermodehelper path a const string firmware: revamp firmware documentation selftests: firmware: send expected errors to /dev/null selftests: firmware: only modprobe if driver is missing platform: Print the resource range if device failed to claim kref: prefer atomic_inc_not_zero to atomic_add_unless debugfs: improve formatting of debugfs_real_fops()
2017-02-03ACPI: Add support for ResourceSource/IRQ domain mappingAgustin Vega-Frias1-0/+10
ACPI extended IRQ resources may contain a ResourceSource to specify an alternate interrupt controller. Introduce acpi_irq_get and use it to implement ResourceSource/IRQ domain mapping. The new API is similar to of_irq_get and allows re-initialization of a platform resource from the ACPI extended IRQ resource, and provides proper behavior for probe deferral when the domain is not yet present when called. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-11platform: Print the resource range if device failed to claimChen Yu1-1/+1
Sometimes we have the following error message: platform MSFT0101:00: failed to claim resource 1 acpi MSFT0101:00: platform device creation failed: -16 But there is not enough information to figure out which resource range failed to claim. Thus print the resource range at first-place thus /proc/iomem or ioports should tell us who already claimed this resource, then the driver bug or incorrect resource assignment which is running into this conflict can be diagnosed: platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff] acpi MSFT0101:00: platform device creation failed: -16 Suggested-by: Len Brown <lenb@kernel.org> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27driver-core: platform: Catch errors from calls to irq_get_irq_dataGuenter Roeck1-3/+8
irq_get_irq_data() can return NULL, which results in a nasty crash. Check its return value before passing it on to irqd_set_trigger_type(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31platform: don't return 0 from platform_get_irq[_byname]() on errorSergei Shtylyov1-2/+2
of_irq_get[_byname]() return 0 iff irq_create_of_mapping() call fails. Returning both error code and 0 on failure is a sign of a misdesigned API, it makes the failure check unnecessarily complex and error prone. We should rely on the platform IRQ resource in this case, not return 0, especially as 0 can be a valid IRQ resource too... Fixes: aff008ad813c ("platform_get_irq: Revert to platform_get_resource if of_irq_get fails") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31platform driver: fix use-after-free in platform_device_del()Jerome Marchand1-2/+1
In platform_device_del(), the device is still used after a call to device_del(). At this point there is no guarantee that the device is still there and there could be a use-after-free access. Move the call to device_remove_properties() before device_del() to fix that. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-09device property: don't bother the drivers with struct property_setHeikki Krogerus1-9/+10
Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-26base/platform: Fix platform drivers with no probe callbackMartin Wilck1-4/+9
Since b8b2c7d845d5, platform_drv_probe() is called for all platform devices. If drv->probe is NULL, and dev_pm_domain_attach() fails, platform_drv_probe() will return the error code from dev_pm_domain_attach(). This causes real_probe() to enter the "probe_failed" path and set dev->driver to NULL. Before b8b2c7d845d5, real_probe() would assume success if both dev->bus->probe and drv->probe were missing. As a result, a device and driver could be "bound" together just by matching their names; this doesn't work any more after b8b2c7d845d5. This may cause problems later for certain usage of platform_driver_register() and platform_device_register_simple(). I observed a panic while loading the tpm_tis driver with parameter "force=1" (i.e. registering tpm_tis as a platform driver), because tpm_tis_init's assumption that the device returned by platform_device_register_simple() was bound didn't hold any more (tpmm_chip_alloc() dereferences chip->pdev->driver, causing panic). This patch restores the previous (4.3.0 and earlier) behavior of platform_drv_probe() in the case when the associated platform driver has no "probe" function. Fixes: b8b2c7d845d5 ("base/platform: assert that dev_pm_domain callbacks are called unconditionally") Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com> Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-21Merge branch 'pm-core'Rafael J. Wysocki1-1/+0
* pm-core: driver core: Avoid NULL pointer dereferences in device_is_bound() platform: Do not detach from PM domains on shutdown USB / PM: Allow USB devices to remain runtime-suspended when sleeping PM / sleep: Go direct_complete if driver has no callbacks PM / Domains: add setter for dev.pm_domain device core: add device_is_bound()
2016-01-12Merge tag 'pm+acpi-4.5-rc1-1' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull oower management and ACPI updates from Rafael Wysocki: "As far as the number of commits goes, ACPICA takes the lead this time, followed by cpufreq and the device properties framework changes. The most significant new feature is the debugfs-based interface to the ACPICA's AML debugger added in the previous cycle and a new user space tool for accessing it. On the cpufreq front, the core is updated to handle governors more efficiently, particularly on systems where a single cpufreq policy object is shared between multiple CPUs, and there are quite a few changes in drivers (intel_pstate, cpufreq-dt etc). The device properties framework is updated to handle built-in (ie included in the kernel itself) device properties better, among other things by adding a fallback mechanism that will allow drivers to provide default properties to be used in case the plaform firmware doesn't provide the properties expected by them. The Operating Performance Points (OPP) framework gets new DT bindings and debugfs support. A new cpufreq driver for ST platforms is added and the ACPI driver for AMD SoCs will now support the APM X-Gene ACPI I2C device. The rest is mostly fixes and cleanups all over. Specifics: - Add a debugfs-based interface for interacting with the ACPICA's AML debugger introduced in the previous cycle and a new user space tool for that, fix some bugs related to the AML debugger and clean up the code in question (Lv Zheng, Dan Carpenter, Colin Ian King, Markus Elfring). - Update ACPICA to upstream revision 20151218 including a number of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael Wysocki). In particular, the previously added erroneous support for the _SUB object is dropped, the concatenate operator will support all ACPI objects now, the Debug Object handling is improved, the SuperName handling of parameters being control methods is fixed, the ObjectType operator handling is updated to follow ACPI 5.0A and the handling of CondRefOf and RefOf is updated accordingly, module- level code will be executed after loading each ACPI table now (instead of being run once after all tables containing AML have been loaded), the Operation Region handlers management is updated to fix some reported problems and a the ACPICA code in the kernel is more in line with the upstream now. - Update the ACPI backlight driver to provide information on whether or not it will generate key-presses for brightness change hotkeys and update some platform drivers (dell-wmi, thinkpad_acpi) to use that information to avoid sending double key-events to users pace for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht). - Improve the ACPI handling of interrupt GPIOs (Christophe Ricard). - Fix the handling of the list of device IDs of device objects found in the ACPI namespace and add a helper for checking if there is a device object for a given device ID (Lukas Wunner). - Change the logic in the ACPI namespace scanning code to create struct acpi_device objects for all ACPI device objects found in the namespace even if _STA fails for them which helps to avoid device enumeration problems on Microsoft Surface 3 (Aaron Lu). - Add support for the APM X-Gene ACPI I2C device to the ACPI driver for AMD SoCs (Loc Ho). - Fix the long-standing issue with the DMA controller on Intel SoCs where ACPI tables have no power management support for the DMA controller itself, but it can be powered off automatically when the last (other) device on the SoC is powered off via ACPI and clean up the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts to fix that problem (Andy Shevchenko). - Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King, Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki, Sinan Kaya). - Update the device properties framework for better handling of built-in properties, add support for built-in properties to the platform bus type, update the MFD subsystem's handling of device properties and add support for passing default configuration data as device properties to the intel-lpss MFD drivers, convert the designware I2C driver to use the unified device properties API and add a fallback mechanism for using default built-in properties if the platform firmware fails to provide the properties as expected by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus, Andrew Morton). - Add new Device Tree bindings to the Operating Performance Points (OPP) framework and update the exynos4412 DT binding accordingly, introduce debugfs support for the OPP framework (Viresh Kumar, Bartlomiej Zolnierkiewicz). - Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng Chen). - Update the cpufreq core to make the handling of governors more efficient, especially on systems where policy objects are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki). - Fix cpufreq governor handling on configurations with CONFIG_HZ_PERIODIC set (Chen Yu). - Clean up the cpufreq core code related to the boost sysfs knob support and update the ACPI cpufreq driver accordingly (Rafael Wysocki). - Add a new cpufreq driver for ST platforms and corresponding Device Tree bindings (Lee Jones). - Update the intel_pstate driver to allow the P-state selection algorithm used by it to depend on the CPU ID of the processor it is running on, make it use a special P-state selection algorithm (with an IO wait time compensation tweak) on Atom CPUs based on the Airmont and Silvermont cores so as to reduce their energy consumption and improve intel_pstate documentation (Philippe Longepe, Srinivas Pandruvada). - Update the cpufreq-dt driver to support registering cooling devices that use the (P * V^2 * f) dynamic power draw formula where V is the voltage, f is the frequency and P is a constant coefficient provided by Device Tree and update the arm_big_little cpufreq driver to use that support (Punit Agrawal). - Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq, blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob Tanenbaum, Markus Elfring). - cpuidle core tweaks related to polling and measured_us calculation (Rik van Riel). - Removal of modularity from a few cpuidle drivers (clps711x, ux500, exynos) that cannot be built as modules in practice (Paul Gortmaker). - PM core update to prevent devices from being probed during system suspend/resume which is generally problematic and may lead to inconsistent behavior (Grygorii Strashko). - Assorted updates of the PM core and related code (Julia Lawall, Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf Hansson). - PNP bus type updates (Christophe Le Roy, Heiner Kallweit). - PCI PM code cleanups (Jarkko Nikula, Julia Lawall). - cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)" * tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits) PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device PM / OPP: Use snprintf() instead of sprintf() Documentation: cpufreq: intel_pstate: enhance documentation ACPI, PCI, irq: remove redundant check for null string pointer ACPI / video: driver must be registered before checking for keypresses cpufreq-dt: fix handling regulator_get_voltage() result cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC PM / sleep: Add support for read-only sysfs attributes ACPI: Fix white space in a structure definition ACPI / SBS: fix inconsistent indenting inside if statement PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching ACPI / PNP: constify device IDs ACPI / PCI: Simplify acpi_penalize_isa_irq() ...
2016-01-12platform: Do not detach from PM domains on shutdownRafael J. Wysocki1-1/+0
Shutdown is carried out when the driver is still bound to the device, so it is incorrect to detach it from a PM domain (if any) at this point. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-and-tested-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-07driver-core: platform: Add platform_irq_count()Stephen Boyd1-0/+20
A recent patch added calls to of_irq_count() in the qcom pinctrl drivers and that caused module build failures because of_irq_count() is not an exported symbol. We shouldn't export of_irq_count() to modules because it's an internal OF API that shouldn't be used by drivers. Platform drivers should use platform device APIs instead. Therefore, add a platform_irq_count() API that mirrors the of_irq_count() API so that platform drivers can stay DT agnostic. Cc: Andy Gross <andy.gross@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-07driver core: platform: Add support for built-in device propertiesMika Westerberg1-0/+25
Make it possible to pass built-in device properties to platform device drivers. This is useful if the system does not have any firmware interface like Device Tree or ACPI which provides these. Properties associated with the platform device will be automatically released when the corresponding device is removed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-05driver-core: platform: Provide helpers for multi-driver modulesThierry Reding1-0/+61
Some modules register several sub-drivers. Provide a helper that makes it easy to register and unregister a list of sub-drivers, as well as unwind properly on error. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04base/platform: assert that dev_pm_domain callbacks are called unconditionallyUwe Kleine-König1-10/+9
When a platform driver doesn't provide a .remove callback the function platform_drv_remove isn't called and so the call to dev_pm_domain_attach called at probe time isn't paired by dev_pm_domain_detach at remove time. To fix this (and similar issues if different callbacks are missing) hook up the driver callbacks unconditionally and make them aware that the platform callbacks might be missing. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-25drivercore: Fix unregistration path of platform devicesGrant Likely1-6/+2
The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2015-06-10Revert "base/platform: Only insert MEM and IO resources"Greg Kroah-Hartman1-7/+3
This reverts commit 36d4b29260753ad78b1ce4363145332c02519adc as it breaks working machines. Cc: Rob Herring <robh@kernel.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10Revert "base/platform: Continue on insert_resource() error"Greg Kroah-Hartman1-15/+11
This reverts commit e50e69d1ac4232af0b6890f16929bf5ceee81538 as it breaks working machines. Cc: Rob Herring <robh@kernel.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10Revert "base/platform: Remove code duplication"Greg Kroah-Hartman1-25/+35
This reverts commit 6d9d4b1469b0d9748145e168fc9ec585e1f3f4b0 as it breaks working machines. Cc: Rob Herring <robh@kernel.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01base/platform: Remove code duplicationRicardo Ribalda Delgado1-35/+25
Failure path of platform_device_add was almost the same as platform_device_del. Refactor same code in a function. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01base/platform: Continue on insert_resource() errorRicardo Ribalda Delgado1-11/+15
insert_resource() can fail when the resource added overlaps (partially or fully) with another. Device tree and AMBA devices may contain resources that overlap, so they could not call platform_device_add (see 02bbde7849e6 ('Revert "of: use platform_device_add"'))" On the other hand, device trees are released using platform_device_unregister(). This function calls platform_device_del(), which calls release_resource(), that crashes when the resource has not been added with with insert_resource. This was not an issue when the device tree could not be modified online, but this is not the case anymore. This patch let the flow continue when there is an insert error, after notifying the user with a dev_err(). r->parent is set to NULL, so platform_device_del() knows that the resource was not added, and therefore it should not be released. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01base/platform: Only insert MEM and IO resourcesRicardo Ribalda Delgado1-3/+7
platform_device_del only checks the type of the resource in order to call release_resource. On the other hand, platform_device_add calls insert_resource for any resource that has a parent. Make both code branches balanced. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-20driver-core: platform_driver_probe() must probe synchronouslyDmitry Torokhov1-0/+13
Because platform_driver_probe() checks, after trying to register driver, if there are any devices that driver successfully bound to, driver's probe routine must be run synchronously. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-03-25drivers: platform: parse IRQ flags from resourcesLinus Walleij1-0/+9
This fixes a regression from the net subsystem: After commit d52fdbb735c36a209f36a628d40ca9185b349ba7 "smc91x: retrieve IRQ and trigger flags in a modern way" a regression would appear on some legacy platforms such as the ARM PXA Zylonite that specify IRQ resources like this: static struct resource r = { .start = X, .end = X, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }; The previous code would retrieve the resource and parse the high edge setting in the SMC91x driver, a use pattern that means every driver specifying an IRQ flag from a static resource need to parse resource flags and apply them at runtime. As we switched the code to use IRQ descriptors to retrieve the the trigger type like this: irqd_get_trigger_type(irq_get_irq_data(...)); the code would work for new platforms using e.g. device tree as the backing irq descriptor would have its flags properly set, whereas this kind of oldstyle static resources at no point assign the trigger flags to the corresponding IRQ descriptor. To make the behaviour identical on modern device tree and legacy static platform data platforms, modify platform_get_irq() to assign the trigger flags to the irq descriptor when a client looks up an IRQ from static resources. Fixes: d52fdbb735c3 ("smc91x: retrieve IRQ and trigger flags in a modern way") Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16driver core / ACPI: Represent ACPI companions using fwnode_handleRafael J. Wysocki1-1/+1
Now that we have struct fwnode_handle, we can use that to point to ACPI companions from struct device objects instead of pointing to struct acpi_device directly. There are two benefits from that. First, the somewhat ugly and hackish struct acpi_dev_node can be dropped and, second, the same struct fwnode_handle pointer can be used in the future to point to other (non-ACPI) firmware device node types. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-24of/reconfig: Add OF_DYNAMIC notifier for platform_bus_typePantelis Antoniou1-0/+1
Add OF notifier handler needed for creating/destroying platform devices according to dynamic runtime changes in the DT live tree. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-06core: platform: let platform_create_bundle initialize module ownerWolfram Sang1-5/+6
Since commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"), platform_driver_register() always overwrites the .owner field of a platform_driver with THIS_MODULE. This breaks platform_create_bundle() which uses it via platform_driver_probe() from within the platform core instead of the module init. Fix it by using a similar #define construct to obtain THIS_MODULE and pass it on later. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06core: platform: let platform_driver_probe initialize module ownerWolfram Sang1-5/+6
Since commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"), platform_driver_register() always overwrites the .owner field of a platform_driver with THIS_MODULE. This breaks platform_driver_probe() which uses it from within the platform core instead of the module init. Fix it by using a similar #define construct to obtain THIS_MODULE and pass it on later. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-30PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.hUlf Hansson1-0/+1
The commit 46420dd73b80 (PM / Domains: Add APIs to attach/detach a PM domain for a device) started using errno values in pm.h header file. It also failed to include the header for these, thus it caused compiler errors. Instead of including the errno header to pm.h, let's move the functions to pm_domain.h, since it's a better match. Fixes: 46420dd73b80 (PM / Domains: Add APIs to attach/detach a PM domain for a device) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22drivercore / platform: Convert to dev_pm_domain_attach|detach()Ulf Hansson1-7/+8
Previously only the ACPI PM domain was supported by the platform bus. Let's convert to the common attach/detach functions for PM domains, which currently means we are extending the support to include the generic PM domain as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-04Merge tag 'driver-core-3.17-rc1' of ↵Linus Torvalds1-2/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver-core pull request for 3.17-rc1. Largest thing in here is the dma-buf rework and fence code, that touched many different subsystems so it was agreed it should go through this tree to handle merge issues. There's also some firmware loading updates, as well as tests added, and a few other tiny changes, the changelog has the details. All have been in linux-next for a long time" * tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) ARM: imx: Remove references to platform_bus in mxc code firmware loader: Fix _request_firmware_load() return val for fw load abort platform: Remove most references to platform_bus device test: add firmware_class loader test doc: fix minor typos in firmware_class README staging: android: Cleanup style issues Documentation: devres: Sort managed interfaces Documentation: devres: Add devm_kmalloc() et al fs: debugfs: remove trailing whitespace kernfs: kernel-doc warning fix debugfs: Fix corrupted loop in debugfs_remove_recursive stable_kernel_rules: Add pointer to netdev-FAQ for network patches driver core: platform: add device binding path 'driver_override' driver core/platform: remove unused implicit padding in platform_object firmware loader: inform direct failure when udev loader is disabled firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN firmware: read firmware size using i_size_read() firmware loader: allow disabling of udev as firmware loader reservation: add suppport for read-only access using rcu reservation: update api and add some helpers ... Conflicts: drivers/base/platform.c
2014-08-04Merge tag 'clk-for-linus-3.17' of ↵Linus Torvalds1-0/+5
git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.17 are mostly additions of new clock drivers and fixes/enhancements to existing clock drivers. There are also some non-critical fixes and improvements to the framework core. Changes to the clock framework core include: - improvements to printks on errors - flattening the previously hierarchal structure of per-clock entries in debugfs - allow per-clock debugfs entries that are specific to a particular clock driver - configure initial clock parent and/or initial clock rate from Device Tree - several feature enhancements to the composite clock type - misc fixes New clock drivers added include: - TI Palmas PMIC - Allwinner A23 SoC - Qualcomm APQ8084 and IPQ8064 SoCs - Rockchip rk3188, rk3066 and rk3288 SoCs - STMicroelectronics STiH407 SoC - Cirrus Logic CLPS711X SoC Many fixes, feature enhancements and further clock tree support for existing clock drivers also were merged, such as Samsung's "ARMCLK down" power saving feature for their Exynos4 & Exynos5 SoCs" * tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: Add missing of_clk_set_defaults export clk: checking wrong variable in __set_clk_parents() clk: Propagate any error return from debug_init() clk: clps711x: Add DT bindings documentation clk: Add CLPS711X clk driver clk: st: Use round to closest divider flag clk: st: Update frequency tables for fs660c32 and fs432c65 clk: st: STiH407: Support for clockgenA9 clk: st: STiH407: Support for clockgenD0/D2/D3 clk: st: STiH407: Support for clockgenC0 clk: st: Add quadfs reset handling clk: st: Add polarity bit indication clk: st: STiH407: Support for clockgenA0 clk: st: STiH407: Support for A9 MUX Clocks clk: st: STiH407: Support for Flexgen Clocks clk: st: Adds Flexgen clock binding clk: st: Remove uncessary (void *) cast clk: st: use static const for clkgen_pll_data tables clk: st: use static const for stm_fs tables clk: st: Update ST clock binding documentation ...
2014-07-25clk: Support for clock parents and rates assigned from device treeSylwester Nawrocki1-0/+5
This patch adds helper functions to configure clock parents and rates as specified through 'assigned-clock-parents', 'assigned-clock-rates' DT properties for a clock provider or clock consumer device. The helpers are now being called by the bus code for the platform, I2C and SPI busses, before the driver probing and also in the clock core after registration of a clock provider. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-21Merge 3.16-rc6 into driver-core-nextGreg Kroah-Hartman1-4/+14
We want the platform changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11platform_get_irq: Revert to platform_get_resource if of_irq_get failsGuenter Roeck1-4/+14
Commits 9ec36ca (of/irq: do irq resolution in platform_get_irq) and ad69674 (of/irq: do irq resolution in platform_get_irq_byname) change the semantics of platform_get_irq and platform_get_irq_byname to always rely on devicetree information if devicetree is enabled and if a devicetree node is attached to the device. The functions now return an error if the devicetree data does not include interrupt information, even if the information is available as platform resource data. This causes mfd client drivers to fail if the interrupt number is passed via platform resources. Therefore, if of_irq_get fails, try platform_get_resource as method of last resort. This restores the original functionality for drivers depending on platform resources to get irq information. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08driver core: platform: add device binding path 'driver_override'Kim Phillips1-0/+47
Needed by platform device drivers, such as the upcoming vfio-platform driver, in order to bypass the existing OF, ACPI, id_table and name string matches, and successfully be able to be bound to any device, like so: echo vfio-platform > /sys/bus/platform/devices/fff51000.ethernet/driver_override echo fff51000.ethernet > /sys/bus/platform/devices/fff51000.ethernet/driver/unbind echo fff51000.ethernet > /sys/bus/platform/drivers_probe This mimics "PCI: Introduce new device binding path using pci_dev.driver_override", which is an interface enhancement for more deterministic PCI device binding, e.g., when in the presence of hotplug. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08driver core/platform: remove unused implicit padding in platform_objectYann Droneaud1-2/+2
Up to 7 bytes are wasted at the end of struct platform_object in the form of padding after name field: unfortunately this padding is not used when allocating the memory to hold the name. This patch converts name array from name[1] to C99 flexible array name[] (equivalent to name[0]) so that no padding is required by the presence of this field. Memory allocation is updated to take care of allocating an additional byte for the NUL terminating character. Built on Fedora 20, using GCC 4.8, for ARM, i386, SPARC64 and x86_64 architectures, the data structure layout can be reported with following command: $ pahole drivers/base/platform.o \ --recursive \ --class_name device,pdev_archdata,platform_device,platform_object Please find below some comparisons of structure layout for arm, i386, sparc64 and x86_64 architecture before and after the patch. --- obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.290960701 +0200 +++ obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.851988347 +0200 @@ -81,10 +81,9 @@ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */ - char name[1]; /* 392 1 */ + char name[0]; /* 392 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 7 */ + /* size: 392, cachelines: 7, members: 2 */ /* paddings: 1, sum paddings: 4 */ - /* last cacheline: 16 bytes */ + /* last cacheline: 8 bytes */ }; --- obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.305960691 +0200 +++ obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.875988332 +0200 @@ -73,9 +73,8 @@ struct platform_object { struct platform_device pdev; /* 0 396 */ /* --- cacheline 6 boundary (384 bytes) was 12 bytes ago --- */ - char name[1]; /* 396 1 */ + char name[0]; /* 396 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 3 */ - /* last cacheline: 16 bytes */ + /* size: 396, cachelines: 7, members: 2 */ + /* last cacheline: 12 bytes */ }; --- obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.406960625 +0200 +++ obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.971988269 +0200 @@ -94,9 +94,8 @@ struct platform_object { struct platform_device pdev; /* 0 2208 */ /* --- cacheline 34 boundary (2176 bytes) was 32 bytes ago --- */ - char name[1]; /* 2208 1 */ + char name[0]; /* 2208 0 */ - /* size: 2216, cachelines: 35, members: 2 */ - /* padding: 7 */ - /* last cacheline: 40 bytes */ + /* size: 2208, cachelines: 35, members: 2 */ + /* last cacheline: 32 bytes */ }; --- obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.432960608 +0200 +++ obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:21.000988250 +0200 @@ -84,9 +84,8 @@ struct platform_object { struct platform_device pdev; /* 0 720 */ /* --- cacheline 11 boundary (704 bytes) was 16 bytes ago --- */ - char name[1]; /* 720 1 */ + char name[0]; /* 720 0 */ - /* size: 728, cachelines: 12, members: 2 */ - /* padding: 7 */ - /* last cacheline: 24 bytes */ + /* size: 720, cachelines: 12, members: 2 */ + /* last cacheline: 16 bytes */ }; Changes from v5 [1]: - dropped dma_mask allocation changes and only kept padding removal changes (name array length set to 0). Changes from v4 [2]: [by Emil Goode <emilgoode@gmail.com>:] - Split v4 of the patch into two separate patches. - Generated new object file size and data structure layout info. - Updated the changelog message. Changes from v3 [3]: - fixed commit message so that git am doesn't fail. Changes from v2 [4]: - move 'dma_mask' to platform_object so that it's always allocated and won't leak on release; remove all previously added support functions. - use C99 flexible array member for 'name' to remove padding at the end of platform_object. Changes from v1 [5]: - remove unneeded kfree() from error path - add reference to author/commit adding allocation of dmamask Changes from v0 [6]: - small rewrite to squeeze the patch to a bare minimal [1] http://lkml.kernel.org/r/1401122483-31603-2-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-1-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-3-git-send-email-emilgoode@gmail.com [2] http://lkml.kernel.org/r/1390817152-30898-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3541871/ [3] http://lkml.kernel.org/r/1390771138-28348-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3540081/ [4] http://lkml.kernel.org/r/1389683909-17495-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3484411/ [5] http://lkml.kernel.org/r/1389649085-7365-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3480961/ [6] http://lkml.kernel.org/r/1386886207-2735-1-git-send-email-ydroneaud@opteya.com Cc: Emil Goode <emilgoode@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Olof Johansson <olof@lixom.net> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23of/irq: do irq resolution in platform_get_irq_byname()Grygorii Strashko1-2/+5
The commit 9ec36cafe43bf835f8f29273597a5b0cbc8267ef "of/irq: do irq resolution in platform_get_irq" from Rob Herring - moves resolving of the interrupt resources in platform_get_irq(). But this solution isn't complete because platform_get_irq_byname() need to be modified the same way. Hence, fix it by adding interrupt resolution code at the platform_get_irq_byname() function too. Cc: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-24of/irq: do irq resolution in platform_get_irqRob Herring1-1/+6
Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-14ACPI / platform: drop redundant ACPI_HANDLE checkJosh Cartwright1-7/+4
The acpi_dev_pm_attach/_detach functions perform their own checks to ensure the device has an ACPI companion. It is not necessary for the caller to do so. This mirrors what other busses with ACPI dev PM support do (i2c, spi, sdio). Cc: Len Brown <lenb@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-17platform: introduce OF style 'modalias' support for platform busZhang Rui1-0/+4
Fix a problem that, the platform bus supports the OF style modalias in .uevent() call, but not in its device 'modalias' sysfs attribute. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-16ACPI: fix module autoloading for ACPI enumerated devicesZhang Rui1-1/+11
ACPI enumerated devices has ACPI style _HID and _CID strings, all of these strings can be used for both driver loading and matching. Currently, in Platform, I2C and SPI bus, the ACPI style driver matching is supported by invoking acpi_driver_match_device() in bus .match() callback. But, the module autoloading is still broken. For example, there is any ACPI device with _HID "INTABCD" that is enumerated to platform bus, and we have a driver that can probe it. The driver exports its module_alias as "acpi:INTABCD" use the following code static const struct acpi_device_id xxx_acpi_match[] = { { "INTABCD", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, xxx_acpi_match); But, unfortunately, the device' modalias is shown as "platform:INTABCD:00", please refer to modalias_show() and platform_uevent() in drivers/base/platform.c. This results in that the driver will not be loaded automatically when the device node is created, because their modalias do not match. This also applies to I2C and SPI bus. With this patch, the device' modalias will be shown as "acpi:INTABCD" as well. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_nodeRafael J. Wysocki1-2/+2
Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-09-26driver core: prevent deferred probe with platform_driver_probeJohan Hovold1-4/+13
Prevent drivers relying on platform_driver_probe from requesting deferred probing in order to avoid further futile probe attempts (either the driver has been unregistered or its probe function has been set to platform_drv_probe_fail when probing is retried). Note that several platform drivers currently return subsystem errors from probe and that these can include -EPROBE_DEFER (e.g. if a gpio request fails). Add a warning to platform_drv_probe that can be used to catch drivers that inadvertently request probe deferral while using platform_driver_probe. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 17:51:15 +0000