| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"enum fw_opt" is not used as an enum.
Change fw_opt to u32 as FW_OPT_* values are OR'd together.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200522231202.13681-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct firmware contains a page table pointer that was used only
internally in the past. Since the actual page tables are referred
from struct fw_priv and should be never from struct firmware, we can
drop this unused field gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200415164500.28749-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases the platform's main firmware (e.g. the UEFI fw) may contain
an embedded copy of device firmware which needs to be (re)loaded into the
peripheral. Normally such firmware would be part of linux-firmware, but in
some cases this is not feasible, for 2 reasons:
1) The firmware is customized for a specific use-case of the chipset / use
with a specific hardware model, so we cannot have a single firmware file
for the chipset. E.g. touchscreen controller firmwares are compiled
specifically for the hardware model they are used with, as they are
calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to
redistribute the firmware. This is especially a problem with customized
firmwares, these get created by the chip vendor for a specific ODM and the
copyright may partially belong with the ODM, so the chip vendor cannot
give a blanket permission to distribute these.
This commit adds a new platform fallback mechanism to the firmware loader
which will try to lookup a device fw copy embedded in the platform's main
firmware if direct filesystem lookup fails.
Drivers which need such embedded fw copies can enable this fallback
mechanism by using the new firmware_request_platform() function.
Note that for now this is only supported on EFI platforms and even on
these platforms firmware_fallback_platform() only works if
CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers
which need this), in all other cases firmware_fallback_platform() simply
always returns -ENOENT.
Reported-by: Dave Olsthoorn <dave@bewaar.me>
Suggested-by: Peter Jones <pjones@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-5-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I have an experimental setup where almost every possible system
service (even early startup ones) runs in separate namespace, using a
dedicated, minimal file system. In process of minimizing the contents
of the file systems with regards to modules and firmware files, I
noticed that in my system, the firmware files are loaded from three
different mount namespaces, those of systemd-udevd, init and
systemd-networkd. The logic of the source namespace is not very clear,
it seems to depend on the driver, but the namespace of the current
process is used.
So, this patch tries to make things a bit clearer and changes the
loading of firmware files only from the mount namespace of init. This
may also improve security, though I think that using firmware files as
attack vector could be too impractical anyway.
Later, it might make sense to make the mount namespace configurable,
for example with a new file in /proc/sys/kernel/firmware_config/. That
would allow a dedicated file system only for firmware files and those
need not be present anywhere else. This configurability would make
more sense if made also for kernel modules and /sbin/modprobe. Modules
are already loaded from init namespace (usermodehelper uses kthreadd
namespace) except when directly loaded by systemd-udevd.
Instead of using the mount namespace of the current process to load
firmware files, use the mount namespace of init process.
Link: https://lore.kernel.org/lkml/bb46ebae-4746-90d9-ec5b-fce4c9328c86@gmail.com/
Link: https://lore.kernel.org/lkml/0e3f7653-c59d-9341-9db2-c88f5b988c68@gmail.com/
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Link: https://lore.kernel.org/r/20200123125839.37168-1-toiwoton@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a preparation patch for adding a new platform fallback mechanism,
which will have its own enable/disable FW_OPT_xxx option.
Note this also fixes a typo in one of the re-wordwrapped comments:
enfoce -> enforce.
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because firmware caching generates uevent messages that are sent over
a netlink socket, it can prevent suspend on many platforms. It's
also not always useful, so make it a configurable option.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20191113225429.118495-1-salyzyn@android.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is useful for users who are trying to identify the firmwares in use
on their system.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Link: https://lore.kernel.org/r/20191103180646.34880-1-sir@cmpwn.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Documentation was revamped in 113ccc but link in
firmware_loader/main.c hasn't been updated.
Signed-off-by: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
Link: https://lore.kernel.org/r/20190912205606.31095-1-arkadiusz@drabczyk.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds the support for loading compressed firmware files.
The primary motivation is to reduce the storage size; e.g. currently
the files in /lib/firmware on my machine counts up to 419MB, while
they can be reduced to 130MB by file compression.
The patch introduces a new kconfig option CONFIG_FW_LOADER_COMPRESS.
Even with this option set, the firmware loader still tries to load the
original firmware file as-is at first, but then falls back to the file
with ".xz" extension when it's not found, and the decompressed file
content is returned to the caller of request_firmware(). So, no
change is needed for the rest.
Currently only XZ format is supported. A caveat is that the kernel XZ
helper code supports only CRC32 (or none) integrity check type, so
you'll have to compress the files via xz -C crc32 option.
Since we can't determine the expanded size immediately from an XZ
file, the patch re-uses the paged buffer that was used for the
user-mode fallback; it puts the decompressed content page, which are
vmapped at the end. The paged buffer code is conditionally built with
a new Kconfig that is selected automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is merely a preparation for the upcoming compressed firmware
support and no functional changes. It moves the code to handle the
paged buffer allocation and mapping out of fallback.c into the main
code, so that they can be used commonly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a minor optimization to use kvmalloc() variant for allocating
the page table for the SG-buffer. They aren't so big in general, so
kmalloc() would fit often better.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a common helper to release the paged buffer resources.
This is rather a preparation for the upcoming decompression support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once after performing vmap() to map the S/G pages, our own page table
becomes superfluous since the pages can be released via vfree()
automatically. Let's change the buffer release code and discard the
page table array for saving some memory.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When no file /path was found, the error code of -ENOENT
enumerated in errno-base.h, is returned. Stating clearly that
the file was not found is much more useful for debugging, So
let's be explicit about that.
Signed-off-by: John Zhao <yuankuiz@codeaurora.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When freeing the fw_priv the item is taken off the list. This causes an
oops in the FW_OPT_NOCACHE case as the list object is not initialized.
Make sure to initialize the list object regardless of this flag.
Fixes: 422b3db2a503 ("firmware: Fix security issue with request_firmware_into_buf()")
Cc: stable@vger.kernel.org
Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag
it is expected that firmware is loaded into buffer from memory.
But inside alloc_lookup_fw_priv every new firmware that is loaded is
added to the firmware cache (fwc) list head. So if any driver requests
a firmware that is already loaded the code iterates over the above
mentioned list and it can end up giving a pointer to other device driver's
firmware buffer.
Also the existing copy may either be modified by drivers, remote processors
or even freed. This causes a potential security issue with batched requests
when using request_firmware_into_buf.
Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE
is set, and also don't do the lookup in the list.
Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional")
[mcgrof: broken since feature introduction on v4.8]
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the firmware loader only exposes one silent path for querying
optional firmware, and that is firmware_request_direct(). This function
also disables the sysfs fallback mechanism, which might not always be the
desired behaviour [0].
This patch introduces a variations of request_firmware() that enable the
caller to disable the undesired warning messages but enables the sysfs
fallback mechanism. This is equivalent to adding FW_OPT_NO_WARN to the
old behaviour.
[0]: https://git.kernel.org/linus/c0cc00f250e1
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
[mcgrof: used the old API calls as the full rename is not done yet, and
add the caller for when FW_LOADER is disabled, enhance documentation ]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is done since this call is now exposed through kernel-doc,
and since this also paves the way for different future types of
fallback mechanims.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
[mcgrof: small coding style changes]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel-doc spec dictates a function name ends in ().
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
[mcgrof: adjust since the wide API rename is not yet merged]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This should let us associate enum kdoc to these values.
While at it, kdocify the fw_opt.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
[mcgrof: coding style fixes, merge kdoc with enum move]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices have an optimization in place to enable the firmware to
be retaineed during a system reboot, so after reboot the device can skip
requesting and loading the firmware. This can save up to 1s in load
time. The mt7601u 802.11 device happens to be such a device.
When these devices retain the firmware on a reboot and then suspend
they can miss looking for the firmware on resume. To help with this we
need a way to cache the firmware when such an optimization has taken
place.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
request_firmware_into_buf() explicitly disables the firmware cache,
meanwhile the firmware cache cannot be used when request_firmware_nowait()
is used without the uevent. Enforce a sanity check for this to avoid future
issues undocumented behaviours should misuses of the firmware cache
happen later.
One of the reasons we want to enforce this is the firmware cache is
used for helping with suspend/resume, and if incompatible calls use it
they can stall suspend.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a helper to check if the firmware cache is already setup for a device.
This will be used later.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently fw_add_devm_name() returns 1 if the firmware cache
was already set. This makes it complicated for us to check for
correctness. It is actually non-fatal if the firmware cache
is already setup, so just return 0, and simplify the checkers.
fw_add_devm_name() adds device's name onto the devres for the
device so that prior to suspend we cache the firmware onto memory,
so that on resume the firmware is reliably available. We never
were checking for success for this call though, meaning in some
really rare cases we my have never setup the firmware cache for
a device, which could in turn make resume fail.
This is all theoretical, no known issues have been reported.
This small issue has been present way since the addition of the
devres firmware cache names on v3.7.
Fixes: f531f05ae9437 ("firmware loader: store firmware name into devres list")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will make it much easier to manage as we manage to
keep trimming componnents down into their own files to more
easily manage and maintain this codebase.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
