summaryrefslogtreecommitdiffstats
path: root/drivers/base/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27driver core: Add sysfs support for physical location of a deviceWon Chung1-0/+1
When ACPI table includes _PLD fields for a device, create a new directory (physical_location) in sysfs to share _PLD fields. Currently without PLD information, when there are multiple of same devices, it is hard to distinguish which device corresponds to which physical device at which location. For example, when there are two Type C connectors, it is hard to find out which connector corresponds to the Type C port on the left panel versus the Type C port on the right panel. With PLD information provided, we can determine which specific device at which location is doing what. _PLD output includes much more fields, but only generic fields are added and exposed to sysfs, so that non-ACPI devices can also support it in the future. The minimal generic fields needed for locating a device are the following. - panel - vertical_position - horizontal_position - dock - lid Signed-off-by: Won Chung <wonchung@google.com> Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-06mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSEDavid Hildenbrand1-1/+1
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-15devres: Enable trace eventsAndy Shevchenko1-0/+3
In some cases the printf() mechanism is too heavy and can't be used. For example, when debugging a race condition involving devres API. When CONFIG_DEBUG_DEVRES is enabled I can't reproduce an issue, and otherwise it's quite visible with a useful information being collected. Enable trace events for devres part of the driver core. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210517122946.53161-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-14numa: Move numa implementation to common codeAtish Patra1-0/+1
ARM64 numa implementation is generic enough that RISC-V can reuse that implementation with very minor cosmetic changes. This will help both ARM64 and RISC-V in terms of maintanace and feature improvement Move the numa implementation code to common directory so that both ISAs can reuse this. This doesn't introduce any function changes for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-04Add auxiliary bus supportDave Ertman1-0/+1
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver. It enables drivers to create an auxiliary_device and bind an auxiliary_driver to it. The bus supports probe/remove shutdown and suspend/resume callbacks. Each auxiliary_device has a unique string based id; driver binds to an auxiliary_device based on this id through the bus. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Co-developed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Martin Habets <mhabets@solarflare.com> Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-08device property: Move fwnode_connection_find_match() under ↵Heikki Krogerus1-1/+1
drivers/base/property.c The function is now only a helper that searches the connection from device graph and then by checking if the supplied connection identifier matches a property that contains reference. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200907120532.37611-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26drivers: base: Introducing software nodes to the firmware node frameworkHeikki Krogerus1-1/+1
Software node is a new struct fwnode_handle type that can be used to describe devices in kernel (software). It is meant to complement fwnodes representing real firmware nodes when they are incomplete (for example missing device properties) and to supply the primary fwnode when the firmware lacks hardware description for a device completely. The software node type is really meant to replace the currently used "property_set" struct fwnode_handle type. The handling of struct property_set is glued to the generic device property handling code, and it is not possible to create a struct property_set independently from the device that it is bind to. struct property_set is only created when device properties are added to already initialized struct device, and control of it is only possible from the generic property handling code. Software nodes are instead designed to be created independently from the device entries (struct device). It makes them much more flexible, as then the device meant to be bind to the node can be created at a later time, and from another location. It is also possible to bind multiple devices to a single software node if needed. The software node implementation also includes support for node hierarchy, which was the main motivation for this commit. The node hierarchy was something that was requested for the struct property_set, but it did not seem reasonable to try to extend the property_set support for that purpose. struct property_set was really meant only for device property handling like the name suggests. Support for struct property_set is not yet removed in this commit, but it will be in the following one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-14dma-mapping: move all DMA mapping code to kernel/dmaChristoph Hellwig1-3/+0
Currently the code is split over various files with dma- prefixes in the lib/ and drives/base directories, and the number of files keeps growing. Move them into a single directory to keep the code together and remove the file name prefixes. To match the irq infrastructure this directory is placed under the kernel/ directory. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-04Merge tag 'driver-core-4.17-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 4.17-rc1. There's really not much here, just a bunch of firmware code refactoring from Luis as he attempts to wrangle that codebase into something that is managable, along with a bunch of userspace tests for it. Other than that, a handful of small bugfixes and reverts of things that didn't work out. Full details are in the shortlog, it's not all that much. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) drivers: base: remove check for callback in coredump_store() mt7601u: use firmware_request_cache() to address cache on reboot firmware: add firmware_request_cache() to help with cache on reboot firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used firmware: explicitly include vmalloc.h firmware: ensure the firmware cache is not used on incompatible calls test_firmware: modify custom fallback tests to use unique files firmware: add helper to check to see if fw cache is setup firmware: fix checking for return values for fw_add_devm_name() rename: _request_firmware_load() fw_load_sysfs_fallback() test_firmware: test three firmware kernel configs using a proc knob test_firmware: expand on library with shared helpers firmware: enable to force disable the fallback mechanism at run time firmware: enable run time change of forcing fallback loader firmware: move firmware loader into its own directory firmware: split firmware fallback functionality into its own file firmware: move loading timeout under struct firmware_fallback_config firmware: use helpers for setting up a temporary cache timeout firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further drivers: base: add description for .coredump() callback ...
2018-03-22drivers: base: Unified device connection lookupHeikki Krogerus1-1/+2
Several frameworks - clk, gpio, phy, pmw, etc. - maintain lookup tables for describing connections and provide custom API for handling them. This introduces a single generic lookup table and API for the connections. The motivation for this commit is centralizing the connection lookup, but the goal is to ultimately extract the connection descriptions also from firmware by using the fwnode_graph_* functions and other mechanisms that are available. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20firmware: move firmware loader into its own directoryLuis R. Rodriguez1-5/+2
This will make it much easier to manage as we manage to keep trimming componnents down into their own files to more easily manage and maintain this codebase. Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20firmware: split firmware fallback functionality into its own fileLuis R. Rodriguez1-1/+3
The firmware fallback code is optional. Split that code out to help distinguish the fallback functionlity from othere core firmware loader features. This should make it easier to maintain and review code changes. The reason for keeping the configuration onto a table which is built-in if you enable firmware loading is so that we can later enable the kernel after subsequent patches to tweak this configuration, even if the firmware loader is modular. This introduces no functional changes. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14firmware: enable to split firmware_class into separate target filesLuis R. Rodriguez1-0/+1
The firmware loader code has grown quite a bit over the years. The practice of stuffing everything we need into one file makes the code hard to follow. In order to split the firmware loader code into different components we must pick a module name and a first object target file. We must keep the firmware_class name to remain compatible with scripts which have been relying on the sysfs loader path for years, so the old module name stays. We can however rename the C file without affecting the module name. The firmware_class used to represent the idea that the code was a simple sysfs firmware loader, provided by the struct class firmware_class. The sysfs firmware loader used to be the default, today its only the fallback mechanism. This only renames the target code then to make emphasis of what the code does these days. With this change new features can also use a new object files. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03arm, arm64: factorize common cpu capacity default codeJuri Lelli1-0/+1
arm and arm64 share lot of code relative to parsing CPU capacity information from DT, using that information for appropriate scaling and exposing a sysfs interface for chaging such values at runtime. Factorize such code in a common place (driver/base/arch_topology.c) in preparation for further additions. Suggested-by: Will Deacon <will.deacon@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juri Lelli <juri.lelli@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10driver-core: add test module for asynchronous probingDmitry Torokhov1-0/+2
This test module tries to test asynchronous driver probing by having a driver that sleeps for an extended period of time (5 secs) in its probe() method. It measures the time needed to register this driver (with device already registered) and a new device (with driver already registered). The module will fail to load if the time spent in register call is more than half the probing sleep time. As a sanity check the driver will then try to synchronously register driver and device and fail if registration takes less than half of the probing sleep time. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17isa: Allow ISA-style drivers on modern systemsWilliam Breathitt Gray1-1/+1
Several modern devices, such as PC/104 cards, are expected to run on modern systems via an ISA bus interface. Since ISA is a legacy interface for most modern architectures, ISA support should remain disabled in general. Support for ISA-style drivers should be enabled on a per driver basis. To allow ISA-style drivers on modern systems, this patch introduces the ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now build conditionally on the ISA_BUS_API Kconfig option, which defaults to the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the ISA_BUS_API Kconfig option to be selected on architectures which do not enable ISA (e.g. X86_64). The ISA_BUS Kconfig option is currently only implemented for X86 architectures. Other architectures may have their own ISA_BUS Kconfig options added as required. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-30drivers/base: Add MSI domain support for non-PCI devicesMarc Zyngier1-0/+1
With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-07drivers: base: support cpu cache information interface to userspace via sysfsSudeep Holla1-1/+1
This patch adds initial support for providing processor cache information to userspace through sysfs interface. This is based on already existing implementations(x86, ia64, s390 and powerpc) and hence the interface is intended to be fully compatible. The main purpose of this generic support is to avoid further code duplication to support new architectures and also to unify all the existing different implementations. This implementation maintains the hierarchy of cache objects which reflects the system's cache topology. Cache devices are instantiated as needed as CPUs come online. The cache information is replicated per-cpu even if they are shared. A per-cpu array of cache information maintained is used mainly for sysfs-related book keeping. It also implements the shared_cpu_map attribute, which is essential for enabling both kernel and user-space to discover the system's overall cache topology. This patch also add the missing ABI documentation for the cacheinfo sysfs interface already, which is well defined and widely used. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-api@vger.kernel.org Cc: linux390@de.ibm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-04Driver core: Unified device properties interface for platform firmwareRafael J. Wysocki1-1/+1
Add a uniform interface by which device drivers can request device properties from the platform firmware by providing a property name and the corresponding data type. The purpose of it is to help to write portable code that won't depend on any particular platform firmware interface. The following general helper functions are added: device_property_present() device_property_read_u8() device_property_read_u16() device_property_read_u32() device_property_read_u64() device_property_read_string() device_property_read_u8_array() device_property_read_u16_array() device_property_read_u32_array() device_property_read_u64_array() device_property_read_string_array() The first one allows the caller to check if the given property is present. The next 5 of them allow single-valued properties of various types to be retrieved in a uniform way. The remaining 5 are for reading properties with multiple values (arrays of either numbers or strings). The interface covers both ACPI and Device Trees. This change set includes material from Mika Westerberg and Aaron Lu. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-23device coredump: add new device coredump classJohannes Berg1-0/+1
Many devices run firmware and/or complex hardware, and most of that can have bugs. When it misbehaves, however, it is often much harder to debug than software running on the host. Introduce a "device coredump" mechanism to allow dumping internal device/firmware state through a generalized mechanism. As devices are different and information needed can vary accordingly, this doesn't prescribe a file format - it just provides mechanism to get data to be able to capture it in a generalized way (e.g. in distributions.) The dumped data will be readable in sysfs in the virtual device's data file under /sys/class/devcoredump/devcd*/. Writing to it will free the data and remove the device, as does a 5-minute timeout. Note that generalized capturing of such data may result in privacy issues, so users generally need to be involved. In order to allow certain users/system integrators/... to disable the feature at all, introduce a Kconfig option to override the drivers that would like to have the feature. For now, this provides two ways of dumping data: 1) with a vmalloc'ed area, that is then given to the subsystem and freed after retrieval or timeout 2) with a generalized reader/free function method We could/should add more options, e.g. a list of pages, since the vmalloc area is very limited on some architectures. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08dma-buf: move to drivers/dma-bufMaarten Lankhorst1-1/+0
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-10drivers/base: provide an infrastructure for componentised subsystemsRussell King1-1/+1
Subsystems such as ALSA, DRM and others require a single card-level device structure to represent a subsystem. However, firmware tends to describe the individual devices and the connections between them. Therefore, we need a way to gather up the individual component devices together, and indicate when we have all the component devices. We do this in DT by providing a "superdevice" node which specifies the components, eg: imx-drm { compatible = "fsl,drm"; crtcs = <&ipu1>; connectors = <&hdmi>; }; The superdevice is declared into the component support, along with the subcomponents. The superdevice receives callbacks to locate the subcomponents, and identify when all components are present. At this point, we bind the superdevice, which causes the appropriate subsystem to be initialised in the conventional way. When any of the components or superdevice are removed from the system, we unbind the superdevice, thereby taking the subsystem down. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29ACPI / hotplug / driver core: Handle containers in a special wayRafael J. Wysocki1-1/+1
ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29Merge remote-tracking branch 'origin/next' into kvm-ppc-nextAlexander Graf1-1/+1
Conflicts: mm/Kconfig CMA DMA split and ZSWAP introduction were conflicting, fix up manually.
2013-07-02mm/cma: Move dma contiguous changes into a seperate configAneesh Kumar K.V1-1/+1
We want to use CMA for allocating hash page table and real mode area for PPC64. Hence move DMA contiguous related changes into a seperate config so that ppc64 can enable CMA without requiring DMA contiguous. Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [removed defconfig changes] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-06-28reservation: cross-device reservation support, v4Maarten Lankhorst1-1/+1
This adds support for a generic reservations framework that can be hooked up to ttm and dma-buf and allows easy sharing of reservations across devices. The idea is that a dma-buf and ttm object both will get a pointer to a struct reservation_object, which has to be reserved before anything is done with the contents of the dma-buf. Changes since v1: - Fix locking issue in ticket_reserve, which could cause mutex_unlock to be called too many times. Changes since v2: - All fence related calls and members have been taken out for now, what's left is the bare minimum to be useful for ttm locking conversion. Changes since v3: - Removed helper functions too. The documentation has an example implementation for locking. With the move to ww_mutex there is no need to have much logic any more. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-23drivers/pinctrl: grab default handles from device coreLinus Walleij1-0/+1
This makes the device core auto-grab the pinctrl handle and set the "default" (PINCTRL_STATE_DEFAULT) state for every device that is present in the device model right before probe. This will account for the lion's share of embedded silicon devcies. A modification of the semantics for pinctrl_get() is also done: previously if the pinctrl handle for a certain device was already taken, the pinctrl core would return an error. Now, since the core may have already default-grabbed the handle and set its state to "default", if the handle was already taken, this will be disregarded and the located, previously instanitated handle will be returned to the caller. This way all code in drivers explicitly requesting their pinctrl handlers will still be functional, and drivers that want to explicitly retrieve and switch their handles can still do that. But if the desired functionality is just boilerplate of this type in the probe() function: struct pinctrl *p; p = devm_pinctrl_get_select_default(&dev); if (IS_ERR(p)) { if (PTR_ERR(p) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(&dev, "no pinctrl handle\n"); } The discussion began with the addition of such boilerplate to the omap4 keypad driver: http://marc.info/?l=linux-input&m=135091157719300&w=2 A previous approach using notifiers was discussed: http://marc.info/?l=linux-kernel&m=135263661110528&w=2 This failed because it could not handle deferred probes. This patch alone does not solve the entire dilemma faced: whether code should be distributed into the drivers or if it should be centralized to e.g. a PM domain. But it solves the immediate issue of the addition of boilerplate to a lot of drivers that just want to grab the default state. As mentioned, they can later explicitly retrieve the handle and set different states, and this could as well be done by e.g. PM domains as it is only related to a certain struct device * pointer. ChangeLog v4->v5 (Stephen): - Simplified the devicecore grab code. - Deleted a piece of documentation recommending that pins be mapped to a device rather than hogged. ChangeLog v3->v4 (Linus): - Drop overzealous NULL checks. - Move kref initialization to pinctrl_create(). - Seeking Tested-by from Stephen Warren so we do not disturb the Tegra platform. - Seeking ACK on this from Greg (and others who like it) so I can merge it through the pinctrl subsystem. ChangeLog v2->v3 (Linus): - Abstain from using IS_ERR_OR_NULL() in the driver core, Russell recently sent a patch to remove it. Handle the NULL case explicitly even though it's a bogus case. - Make sure we handle probe deferral correctly in the device core file. devm_kfree() the container on error so we don't waste memory for devices without pinctrl handles. - Introduce reference counting into the pinctrl core using <linux/kref.h> so that we don't release pinctrl handles that have been obtained for two or more places. ChangeLog v1->v2 (Linus): - Only store a pointer in the device struct, and only allocate this if it's really used by the device. Cc: Felipe Balbi <balbi@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mitch Bradley <wmb@firmworks.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [swarren: fixed and simplified error-handling in pinctrl_bind_pins(), to correctly handle deferred probe. Removed admonition from docs not to use pinctrl hogs for devices] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-21drivers: add Contiguous Memory AllocatorMarek Szyprowski1-0/+1
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
2012-02-10drivers/base: add bus for System-on-Chip devicesLee Jones1-0/+1
Traditionally, any System-on-Chip based platform creates a flat list of platform_devices directly under /sys/devices/platform. In order to give these some better structure, this introduces a new bus type for soc_devices that are registered with the new soc_device_register() function. All devices that are on the same chip should then be registered as child devices of the soc device. The soc bus also exports a few standardised device attributes which allow user space to query the specific type of soc. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-22driver core: remove drivers/base/sys.c and include/linux/sysdev.hGreg Kroah-Hartman1-1/+1
Now that all users of 'struct sysdev' are removed from the kernel, we can safely remove the .h and .c files for this code, to ensure that no one accidentally starts to use it again. Many thanks for Kay who did all the hard work here on making this happen. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-08Merge branch 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
* 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linux: dma-buf: mark EXPERIMENTAL for 1st release. dma-buf: Documentation for buffer sharing framework dma-buf: Introduce dma buffer sharing mechanism
2012-01-06dma-buf: Introduce dma buffer sharing mechanismSumit Semwal1-0/+1
This is the first step in defining a dma buffer sharing mechanism. A new buffer object dma_buf is added, with operations and API to allow easy sharing of this buffer object across devices. The framework allows: - creation of a buffer object, its association with a file pointer, and associated allocator-defined operations on that buffer. This operation is called the 'export' operation. - different devices to 'attach' themselves to this exported buffer object, to facilitate backing storage negotiation, using dma_buf_attach() API. - the exported buffer object to be shared with the other entity by asking for its 'file-descriptor (fd)', and sharing the fd across. - a received fd to get the buffer object back, where it can be accessed using the associated exporter-defined operations. - the exporter and user to share the scatterlist associated with this buffer object using map_dma_buf and unmap_dma_buf operations. Atleast one 'attach()' call is required to be made prior to calling the map_dma_buf() operation. Couple of building blocks in map_dma_buf() are added to ease introduction of sync'ing across exporter and users, and late allocation by the exporter. For this first version, this framework will work with certain conditions: - *ONLY* exporter will be allowed to mmap to userspace (outside of this framework - mmap is not a buffer object operation), - currently, *ONLY* users that do not need CPU access to the buffer are allowed. More details are there in the documentation patch. This is based on design suggestions from many people at the mini-summits[1], most notably from Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and Daniel Vetter <daniel@ffwll.ch>. The implementation is inspired from proof-of-concept patch-set from Tomasz Stanislawski <t.stanislaws@samsung.com>, who demonstrated buffer sharing between two v4l2 devices. [2] [1]: https://wiki.linaro.org/OfficeofCTO/MemoryManagement [2]: http://lwn.net/Articles/454389 Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-and-Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-26topology: Provide CPU topology in sysfs in !SMP configurationsBen Hutchings1-2/+2
We should provide topology information to userland even if it's not very interesting. The current code appears to work properly for !SMP (tested on i386). Reference: http://bugs.debian.org/649216 Reported-by: Marcus Osdoba <marcus.osdoba@googlemail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regulator: Convert tps65023 to use regmap API regmap: Add SPI bus support regmap: Add I2C bus support regmap: Add generic non-memory mapped register access API
2011-07-23regmap: Add generic non-memory mapped register access APIMark Brown1-0/+1
There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-14drivers: iommu: move to a dedicated folderOhad Ben-Cohen1-1/+0
Create a dedicated folder for iommu drivers, and move the base iommu implementation over there. Grouping the various iommu drivers in a single location will help finding similar problems shared by different platforms, so they could be solved once, in the iommu framework, instead of solved differently (or duplicated) in each driver. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-03-15PM / Core: Introduce struct syscore_ops for core subsystems PMRafael J. Wysocki1-1/+1
Some subsystems need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled. The only way to register such operations is to define a sysdev class and a sysdev specifically for this purpose which is cumbersome and inefficient. Moreover, the arguments taken by sysdev suspend, resume and shutdown callbacks are practically never necessary. For this reason, introduce a simpler interface allowing subsystems to register operations to be executed very late during system suspend and shutdown and very early during resume in the form of strcut syscore_ops objects. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver-core: base: change to new flag variablematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Driver Core: devtmpfs - kernel-maintained tmpfs-based /devKay Sievers1-0/+1
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15driver-core: move dma-coherent.c from kernel to driver/baseMing Lei1-0/+1
Placing dma-coherent.c in driver/base is better than in kernel, since it contains code to do per-device coherent dma memory handling. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-03select IOMMU_API when DMAR and/or AMD_IOMMU is selectedJoerg Roedel1-0/+1
These two IOMMUs can implement the current version of this API. So select the API if one or both of these IOMMU drivers is selected. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-02-05Merge branch 'dmapool' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: pool: Improve memory usage for devices which can't cross boundaries Change dmapool free block management dmapool: Tidy up includes and add comments dmapool: Validate parameters to dma_pool_create Avoid taking waitqueue lock in dmapool dmapool: Fix style problems Move dmapool.c to mm/ directory
2008-01-24driver core: fix build with SYSFS=nRandy Dunlap1-0/+2
When SYSFS=n and MODULES=y, build ends with: linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver': linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function) make[3]: *** [drivers/base/module.o] Error 1 Below is one possible fix. Build-tested with all 4 config combinations of SYSFS & MODULES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: move the driver specific module code into the driver coreGreg Kroah-Hartman1-0/+1
The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-04Move dmapool.c to mm/ directoryMatthew Wilcox1-1/+1
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-05-07Introduce CONFIG_HAS_DMAHeiko Carstens1-2/+2
Architectures that don't support DMA can say so by adding a config NO_DMA to their Kconfig file. This will prevent compilation of some dma specific driver code. Also dma-mapping-broken.h isn't needed anymore on at least s390. This avoids compilation and linking of otherwise dead/broken code. Other architectures that include dma-mapping-broken.h are arm26, h8300, m68k, m68knommu and v850. If these could be converted as well we could get rid of the header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> "John W. Linville" <linville@tuxdriver.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: <James.Bottomley@SteelEye.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <geert@linux-m68k.org> Cc: <zippel@linux-m68k.org> Cc: <spyro@f2s.com> Cc: <uclinux-v850@lsi.nec.co.jp> Cc: <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09devres: device resource managementTejun Heo1-0/+1
Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>