summaryrefslogtreecommitdiffstats
path: root/drivers/base/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-01-14numa: Move numa implementation to common codeAtish Patra1-0/+6
ARM64 numa implementation is generic enough that RISC-V can reuse that implementation with very minor cosmetic changes. This will help both ARM64 and RISC-V in terms of maintanace and feature improvement Move the numa implementation code to common directory so that both ISAs can reuse this. This doesn't introduce any function changes for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-07drivers: base: Kconfig: fix spelling mistake "heterogenous" -> "heterogeneous"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201215145440.204362-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Add auxiliary bus supportDave Ertman1-0/+3
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver. It enables drivers to create an auxiliary_device and bind an auxiliary_driver to it. The bus supports probe/remove shutdown and suspend/resume callbacks. Each auxiliary_device has a unique string based id; driver binds to an auxiliary_device based on this id through the bus. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Co-developed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Martin Habets <mhabets@solarflare.com> Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-01drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTSAnders Roxell1-1/+2
This makes it easier to enable all KUnit fragments. Adding 'if !KUNIT_ALL_TESTS' so individual tests can not be turned off. Therefore if KUNIT_ALL_TESTS is enabled that will hide the prompt in menuconfig. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-10kunit: building kunit as a module breaks allmodconfigAlan Maguire1-1/+1
kunit tests that do not support module build should depend on KUNIT=y rather than just KUNIT in Kconfig, otherwise they will trigger compilation errors for "make allmodconfig" builds. Fixes: 9fe124bf1b77 ("kunit: allow kunit to be loaded as a module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-11-29PM / QoS: Initial kunit testLeonard Crestez1-0/+4
The pm_qos family of APIs are used in relatively difficult to reproduce scenarios such as thermal throttling so they benefit from unit testing. Start by adding basic tests from the the freq_qos APIs. It includes tests for issues that were brought up on mailing lists: https://patchwork.kernel.org/patch/11252425/#23017005 https://patchwork.kernel.org/patch/11253421/ Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-22base: arch_topology: update Kconfig help descriptionSudeep Holla1-1/+1
Commit 5d777b185f6d ("arch_topology: Make cpu_capacity sysfs node as read-only") made cpu_capacity sysfs node read-only. Update the GENERIC_ARCH_TOPOLOGY Kconfig help section to reflect the same. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-04-19Make anon_inodes unconditionalDavid Howells1-1/+0
Make the anon_inodes facility unconditional so that it can be used by core VFS code and pidfd code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [christian@brauner.io: adapt commit message to mention pidfds] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-04node: Add heterogenous memory access attributesKeith Busch1-0/+8
Heterogeneous memory systems provide memory nodes with different latency and bandwidth performance attributes. Provide a new kernel interface for subsystems to register the attributes under the memory target node's initiator access class. If the system provides this information, applications may query these attributes when deciding which node to request memory. The following example shows the new sysfs hierarchy for a node exporting performance attributes: # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/ /sys/devices/system/node/nodeY/accessZ/initiators/ |-- read_bandwidth |-- read_latency |-- write_bandwidth `-- write_latency The bandwidth is exported as MB/s and latency is reported in nanoseconds. The values are taken from the platform as reported by the manufacturer. Memory accesses from an initiator node that is not one of the memory's access "Z" initiator nodes linked in the same directory may observe different performance than reported here. When a subsystem makes use of this interface, initiators of a different access number may not have the same performance relative to initiators in other access numbers, or omitted from the any access class' initiators. Descriptions for memory access initiator performance access attributes are added to sysfs stable documentation. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01driver: base: Disable CONFIG_UEVENT_HELPER by defaultGeert Uytterhoeven1-1/+0
Since commit 7934779a69f1184f ("Driver-Core: disable /sbin/hotplug by default"), the help text for the /sbin/hotplug fork-bomb says "This should not be used today [...] creates a high system load, or [...] out-of-memory situations during bootup". The rationale for this was that no recent mainstream system used this anymore (in 2010!). A few years later, the complete uevent helper support was made optional in commit 86d56134f1b67d0c ("kobject: Make support for uevent_helper optional."). However, if was still left enabled by default, to support ancient userland. Time passed by, and nothing should use this anymore, so it can be disabled by default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20dma-mapping: move CONFIG_DMA_CMA to kernel/dma/KconfigChristoph Hellwig1-77/+0
This is where all the related code already lives. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14firmware_loader: move kconfig FW_LOADER entries to its own fileLuis R. Rodriguez1-154/+1
This will make it easier to track and easier to understand what components and features are part of the FW_LOADER. There are some components related to firmware which have *nothing* to do with the FW_LOADER, souch as PREVENT_FIRMWARE_BUILD. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14firmware_loader: replace ---help--- with helpLuis R. Rodriguez1-1/+1
As per checkpatch using help is preferred over ---help---. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14firmware_loader: enhance Kconfig documentation over FW_LOADERLuis R. Rodriguez1-34/+131
If you try to read FW_LOADER today it speaks of old riddles and unless you have been following development closely you will lose track of what is what. Even the documentation for PREVENT_FIRMWARE_BUILD is a bit fuzzy and how it fits into this big picture. Give the FW_LOADER kconfig documentation some love with more up to date developments and recommendations. While at it, wrap the FW_LOADER code into its own menu to compartmentalize and make it clearer which components really are part of the FW_LOADER. This should also make it easier to later move these kconfig entries into the firmware_loader/ directory later. This also now recommends using firmwared [0] for folks left needing a uevent handler in userspace for the sysfs firmware fallback mechanis given udev's uevent firmware mechanism was ripped out a while ago. [0] https://github.com/teg/firmwared Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds1-23/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-25firmware: Drop FIRMWARE_IN_KERNEL Kconfig optionBenjamin Gilbert1-23/+5
It doesn't actually do anything. Merge its help text into EXTRA_FIRMWARE. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Fixes: 0946b2fb38fd ("firmware: cleanup FIRMWARE_IN_KERNEL message") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18BackMerge tag 'v4.15-rc8' into drm-nextDave Airlie1-0/+3
Linux 4.15-rc8 Daniel requested this for so the intel CI won't fall over on drm-next so often.
2018-01-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
2018-01-08sysfs/cpu: Add vulnerability folderThomas Gleixner1-0/+3
As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie1-12/+13
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-04Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie1-0/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-11-28firmware: cleanup FIRMWARE_IN_KERNEL messageRobin H. Johnson1-12/+13
The help for FIRMWARE_IN_KERNEL still references the firmware_install command that was recently removed by commit 5620a0d1aacd ("firmware: delete in-kernel firmware"). Clean up the message to direct the user to their distribution's linux-firmware package, and remove any reference to firmware being included in the kernel source tree. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware"). Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: stable <stable@vger.kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21dma-buf/fence: Fix lock inversion within dma-fence-arrayChris Wilson1-0/+1
Ages ago Rob Clark noted, "Currently with fence-array, we have a potential deadlock situation. If we fence_add_callback() on an array-fence, the array-fence's lock is acquired first, and in it's ->enable_signaling() callback, it will install cbs on it's array-member fences, so the array-member's lock is acquired second. But in the signal path, the array-member's lock is acquired first, and the array-fence's lock acquired second." Rob proposed either extensive changes to dma-fence to unnest the fence-array signaling, or to defer the signaling onto a workqueue. This is a more refined version of the later, that should keep the latency of the fence signaling to a minimum by using an irq-work, which is executed asap. Reported-by: Rob Clark <robdclark@gmail.com> Suggested-by: Rob Clark <robdclark@gmail.com> References: 1476635975-21981-1-git-send-email-robdclark@gmail.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf1-4/+1
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03arm, arm64: factorize common cpu capacity default codeJuri Lelli1-0/+8
arm and arm64 share lot of code relative to parsing CPU capacity information from DT, using that information for appropriate scaling and exposing a sysfs interface for chaging such values at runtime. Factorize such code in a common place (driver/base/arch_topology.c) in preparation for further additions. Suggested-by: Will Deacon <will.deacon@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juri Lelli <juri.lelli@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-13Merge tag 'driver-core-4.10-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...
2016-12-13Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-3/+3
Pull drm updates from Dave Airlie: "This is the main pull request for drm for 4.10 kernel. New drivers: - ZTE VOU display driver (zxdrm) - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson) - MXSFB support (mxsfb) Core: - Format handling has been reworked - Better atomic state debugging - drm_mm leak debugging - Atomic explicit fencing support - fbdev helper ops - Documentation updates - MST fbcon fixes Bridge: - Silicon Image SiI8620 driver Panel: - Add support for new simple panels i915: - GVT Device model - Better HDMI2.0 support on skylake - More watermark fixes - GPU idling rework for suspend/resume - DP Audio workarounds - Scheduler prep-work - Opregion CADL handling - GPU scheduler and priority boosting amdgfx/radeon: - Support for virtual devices - New VM manager for non-contig VRAM buffers - UVD powergating - SI register header cleanup - Cursor fixes - Powermanagement fixes nouveau: - Powermangement reworks for better voltage/clock changes - Atomic modesetting support - Displayport Multistream (MST) support. - GP102/104 hang and cursor fixes - GP106 support hisilicon: - hibmc support (BMC chip for aarch64 servers) armada: - add tracing support for overlay change - refactor plane support - de-midlayer the driver omapdrm: - Timing code cleanups rcar-du: - R8A7792/R8A7796 support - Misc fixes. sunxi: - A31 SoC display engine support imx-drm: - YUV format support - Cleanup plane atomic update mali-dp: - Misc fixes dw-hdmi: - Add support for HDMI i2c master controller tegra: - IOMMU support fixes - Error handling fixes tda998x: - Fix connector registration - Improved robustness - Fix infoframe/audio compliance virtio: - fix busid issues - allocate more vbufs qxl: - misc fixes and cleanups. vc4: - Fragment shader threading - ETC1 support - VEC (tv-out) support msm: - A5XX GPU support - Lots of atomic changes tilcdc: - Misc fixes and cleanups. etnaviv: - Fix dma-buf export path - DRAW_INSTANCED support - fix driver on i.MX6SX exynos: - HDMI refactoring fsl-dcu: - fbdev changes" * tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits) drm/nouveau/kms/nv50: fix atomic regression on original G80 drm/nouveau/bl: Do not register interface if Apple GMUX detected drm/nouveau/bl: Assign different names to interfaces drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2 drm/nouveau/ltc: protect clearing of comptags with mutex drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap drm/nouveau/core: recognise GP106 chipset drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode drm/nouveau/gr/gf100-: properly ack all FECS error interrupts drm/nouveau/fifo/gf100-: recover from host mmu faults drm: Add fake controlD* symlinks for backwards compat drm/vc4: Don't use drm_put_dev drm/vc4: Document VEC DT binding drm/vc4: Add support for the VEC (Video Encoder) IP drm: Add TV connector states to drm_connector_state drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum drm/vc4: Fix ->clock_select setting for the VEC encoder drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well drm/amdgpu: use pin rather than pin_restricted in a few cases ...
2016-11-29Merge tag 'soc-device-match-tag1' into nextUlf Hansson1-0/+1
Merge the immutable soc-device-match-tag1 provided by Geert Uytterhoeven to pull in the new soc_device_match() interface for matching against soc_bus attributes.
2016-11-10driver-core: add test module for asynchronous probingDmitry Torokhov1-0/+2
This test module tries to test asynchronous driver probing by having a driver that sleeps for an extended period of time (5 secs) in its probe() method. It measures the time needed to register this driver (with device already registered) and a new device (with driver already registered). The module will fail to load if the time spent in register call is more than half the probing sleep time. As a sanity check the driver will then try to synchronously register driver and device and fail if registration takes less than half of the probing sleep time. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10base: soc: Introduce soc_device_match() interfaceArnd Bergmann1-0/+1
We keep running into cases where device drivers want to know the exact version of the a SoC they are currently running on. In the past, this has usually been done through a vendor specific API that can be called by a driver, or by directly accessing some kind of version register that is not part of the device itself but that belongs to a global register area of the chip. Common reasons for doing this include: - A machine is not using devicetree or similar for passing data about on-chip devices, but just announces their presence using boot-time platform devices, and the machine code itself does not care about the revision. - There is existing firmware or boot loaders with existing DT binaries with generic compatible strings that do not identify the particular revision of each device, but the driver knows which SoC revisions include which part. - A prerelease version of a chip has some quirks and we are using the same version of the bootloader and the DT blob on both the prerelease and the final version. An update of the DT binding seems inappropriate because that would involve maintaining multiple copies of the dts and/or bootloader. This patch introduces the soc_device_match() interface that is meant to work like of_match_node() but instead of identifying the version of a device, it identifies the SoC itself using a vendor-agnostic interface. Unlike of_match_node(), we do not do an exact string compare but instead use glob_match() to allow wildcards in strings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07Backmerge tag 'v4.9-rc4' into drm-nextDave Airlie1-2/+4
Linux 4.9-rc4 This is needed for nouveau development.
2016-10-27driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE strongerLaura Abbott1-2/+4
The current state of driver removal is not great. CONFIG_DEBUG_TEST_DRIVER_REMOVE finds lots of errors. The help text currently undersells exactly how many errors this option will find. Add a bit more description to indicate this option shouldn't be turned on unless you actually want to debug driver removal. The text can be changed later when more drivers are fixed up. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-25dma-buf: Rename struct fence to dma_fenceChris Wilson1-3/+3
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-08-31driver core: add test of driver remove calls during probeRob Herring1-0/+10
In recent discussions on ksummit-discuss[1], it was suggested to do a sequence of probe, remove, probe for testing driver remove paths. This adds a kconfig option for said test. [1] https://lists.linuxfoundation.org/pipermail/ksummit-discuss/2016-August/003459.html Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-10cma: make default CMA area size zero for x86Akinobu Mita1-1/+7
This makes CMA memory area size zero for x86 in default configuration (doesn't change on the other architectures). If default CMA size is zero, DMA_CMA is disabled. It can be enabled by passing cma= to the kernel. This makes less impact on x86. Because there is no mainline driver that requires it for x86, and Peter Hurley reported the performance regression, as this is trying to drive _all_ dma mapping allocations through a _very_ small window. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Jean Delvare <jdelvare@suse.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-07tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMPJohannes Berg1-3/+3
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tiny: reverse logic for DISABLE_DEV_COREDUMPAristeu Rozanski1-8/+11
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-09CMA: document cma=0Jean Delvare1-0/+3
It isn't obvious that CMA can be disabled on the kernel's command line, so document it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-23device coredump: add new device coredump classJohannes Berg1-0/+21
Many devices run firmware and/or complex hardware, and most of that can have bugs. When it misbehaves, however, it is often much harder to debug than software running on the host. Introduce a "device coredump" mechanism to allow dumping internal device/firmware state through a generalized mechanism. As devices are different and information needed can vary accordingly, this doesn't prescribe a file format - it just provides mechanism to get data to be able to capture it in a generalized way (e.g. in distributions.) The dumped data will be readable in sysfs in the virtual device's data file under /sys/class/devcoredump/devcd*/. Writing to it will free the data and remove the device, as does a 5-minute timeout. Note that generalized capturing of such data may result in privacy issues, so users generally need to be involved. In order to allow certain users/system integrators/... to disable the feature at all, introduce a Kconfig option to override the drivers that would like to have the feature. For now, this provides two ways of dumping data: 1) with a vmalloc'ed area, that is then given to the subsystem and freed after retrieval or timeout 2) with a generalized reader/free function method We could/should add more options, e.g. a list of pages, since the vmalloc area is very limited on some architectures. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-06CMA: generalize CMA reserved area management functionalityJoonsoo Kim1-10/+0
Currently, there are two users on CMA functionality, one is the DMA subsystem and the other is the KVM on powerpc. They have their own code to manage CMA reserved area even if they looks really similar. From my guess, it is caused by some needs on bitmap management. KVM side wants to maintain bitmap not for 1 page, but for more size. Eventually it use bitmap where one bit represents 64 pages. When I implement CMA related patches, I should change those two places to apply my change and it seem to be painful to me. I want to change this situation and reduce future code management overhead through this patch. This change could also help developer who want to use CMA in their new feature development, since they can use CMA easily without copying & pasting this reserved area management code. In previous patches, we have prepared some features to generalize CMA reserved area management and now it's time to do it. This patch moves core functions to mm/cma.c and change DMA APIs to use these functions. There is no functional change in DMA APIs. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Gleb Natapov <gleb@kernel.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-08firmware loader: allow disabling of udev as firmware loaderTakashi Iwai1-2/+8
[The patch was originally proposed by Tom Gundersen, and rewritten afterwards by me; most of changelogs below borrowed from Tom's original patch -- tiwai] Currently (at least) the dell-rbu driver selects FW_LOADER_USER_HELPER, which means that distros can't really stop loading firmware through udev without breaking other users (though some have). Ideally we would remove/disable the udev firmware helper in both the kernel and in udev, but if we were to disable it in udev and not the kernel, the result would be (seemingly) hung kernels as no one would be around to cancel firmware requests. This patch allows udev firmware loading to be disabled while still allowing non-udev firmware loading, as done by the dell-rbu driver, to continue working. This is achieved by only using the fallback mechanism when the uevent is suppressed. The patch renames the user-selectable Kconfig from FW_LOADER_USER_HELPER to FW_LOADER_USER_HELPER_FALLBACK, and the former is reverse-selected by the latter or the drivers that need userhelper like dell-rbu. Also, the "default y" is removed together with this change, since it's been deprecated in udev upstream, thus rather better to disable it nowadays. Tested with FW_LOADER_USER_HELPER=n LATTICE_ECP3_CONFIG=y DELL_RBU=y and udev without the firmware loading support, but I don't have the hardware to test the lattice/dell drivers, so additional testing would be appreciated. Reviewed-by: Tom Gundersen <teg@jklm.no> Cc: Ming Lei <ming.lei@canonical.com> Cc: Abhay Salunke <Abhay_Salunke@dell.com> Cc: Stefan Roese <sr@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kay Sievers <kay@vrfy.org> Tested-by: Balaji Singh <B_B_Singh@DELL.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08fence: dma-buf cross-device synchronization (v18)Maarten Lankhorst1-0/+9
A fence can be attached to a buffer which is being filled or consumed by hw, to allow userspace to pass the buffer without waiting to another device. For example, userspace can call page_flip ioctl to display the next frame of graphics after kicking the GPU but while the GPU is still rendering. The display device sharing the buffer with the GPU would attach a callback to get notified when the GPU's rendering-complete IRQ fires, to update the scan-out address of the display, without having to wake up userspace. A driver must allocate a fence context for each execution ring that can run in parallel. The function for this takes an argument with how many contexts to allocate: + fence_context_alloc() A fence is transient, one-shot deal. It is allocated and attached to one or more dma-buf's. When the one that attached it is done, with the pending operation, it can signal the fence: + fence_signal() To have a rough approximation whether a fence is fired, call: + fence_is_signaled() The dma-buf-mgr handles tracking, and waiting on, the fences associated with a dma-buf. The one pending on the fence can add an async callback: + fence_add_callback() The callback can optionally be cancelled with: + fence_remove_callback() To wait synchronously, optionally with a timeout: + fence_wait() + fence_wait_timeout() When emitting a fence, call: + trace_fence_emit() To annotate that a fence is blocking on another fence, call: + trace_fence_annotate_wait_on(fence, on_fence) A default software-only implementation is provided, which can be used by drivers attaching a fence to a buffer when they have no other means for hw sync. But a memory backed fence is also envisioned, because it is common that GPU's can write to, or poll on some memory location for synchronization. For example: fence = custom_get_fence(...); if ((seqno_fence = to_seqno_fence(fence)) != NULL) { dma_buf *fence_buf = seqno_fence->sync_buf; get_dma_buf(fence_buf); ... tell the hw the memory location to wait ... custom_wait_on(fence_buf, seqno_fence->seqno_ofs, fence->seqno); } else { /* fall-back to sw sync * / fence_add_callback(fence, my_cb); } On SoC platforms, if some other hw mechanism is provided for synchronizing between IP blocks, it could be supported as an alternate implementation with it's own fence ops in a similar way. enable_signaling callback is used to provide sw signaling in case a cpu waiter is requested or no compatible hardware signaling could be used. The intention is to provide a userspace interface (presumably via eventfd) later, to be used in conjunction with dma-buf's mmap support for sw access to buffers (or for userspace apps that would prefer to do their own synchronization). v1: Original v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided that dma-fence didn't need to care about the sw->hw signaling path (it can be handled same as sw->sw case), and therefore the fence->ops can be simplified and more handled in the core. So remove the signal, add_callback, cancel_callback, and wait ops, and replace with a simple enable_signaling() op which can be used to inform a fence supporting hw->hw signaling that one or more devices which do not support hw signaling are waiting (and therefore it should enable an irq or do whatever is necessary in order that the CPU is notified when the fence is passed). v3: Fix locking fail in attach_fence() and get_fence() v4: Remove tie-in w/ dma-buf.. after discussion w/ danvet and mlankorst we decided that we need to be able to attach one fence to N dma-buf's, so using the list_head in dma-fence struct would be problematic. v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager. v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments about checking if fence fired or not. This is broken by design. waitqueue_active during destruction is now fatal, since the signaller should be holding a reference in enable_signalling until it signalled the fence. Pass the original dma_fence_cb along, and call __remove_wait in the dma_fence_callback handler, so that no cleanup needs to be performed. v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if fence wasn't signaled yet, for example for hardware fences that may choose to signal blindly. v8: [ Maarten Lankhorst ] Tons of tiny fixes, moved __dma_fence_init to header and fixed include mess. dma-fence.h now includes dma-buf.h All members are now initialized, so kmalloc can be used for allocating a dma-fence. More documentation added. v9: Change compiler bitfields to flags, change return type of enable_signaling to bool. Rework dma_fence_wait. Added dma_fence_is_signaled and dma_fence_wait_timeout. s/dma// and change exports to non GPL. Added fence_is_signaled and fence_enable_sw_signaling calls, add ability to override default wait operation. v10: remove event_queue, use a custom list, export try_to_wake_up from scheduler. Remove fence lock and use a global spinlock instead, this should hopefully remove all the locking headaches I was having on trying to implement this. enable_signaling is called with this lock held. v11: Use atomic ops for flags, lifting the need for some spin_lock_irqsaves. However I kept the guarantee that after fence_signal returns, it is guaranteed that enable_signaling has either been called to completion, or will not be called any more. Add contexts and seqno to base fence implementation. This allows you to wait for less fences, by testing for seqno + signaled, and then only wait on the later fence. Add FENCE_TRACE, FENCE_WARN, and FENCE_ERR. This makes debugging easier. An CONFIG_DEBUG_FENCE will be added to turn off the FENCE_TRACE spam, and another runtime option can turn it off at runtime. v12: Add CONFIG_FENCE_TRACE. Add missing documentation for the fence->context and fence->seqno members. v13: Fixup CONFIG_FENCE_TRACE kconfig description. Move fence_context_alloc to fence. Simplify fence_later. Kill priv member to fence_cb. v14: Remove priv argument from fence_add_callback, oops! v15: Remove priv from documentation. Explicitly include linux/atomic.h. v16: Add trace events. Import changes required by android syncpoints. v17: Use wake_up_state instead of try_to_wake_up. (Colin Cross) Fix up commit description for seqno_fence. (Rob Clark) v18: Rename release_fence to fence_release. Move to drivers/dma-buf/. Rename __fence_is_signaled and __fence_signal to *_locked. Rename __fence_init to fence_init. Make fence_default_wait return a signed long, and fix wait ops too. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> #use smp_mb__before_atomic() Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-04cma: increase CMA_ALIGNMENT upper limit to 12Marc Carino1-1/+1
Some systems require a larger maximum PAGE_SIZE order for CMA allocations. To accommodate such systems, increase the upper-bound of the CMA_ALIGNMENT range to 12 (which ends up being 16MB on systems with 4K pages). Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-25kobject: Make support for uevent_helper optional.Michael Marineau1-6/+11
Support for uevent_helper, aka hotplug, is not required on many systems these days but it can still be enabled via sysfs or sysctl. Reported-by: Darren Shepherd <darren.s.shepherd@gmail.com> Signed-off-by: Michael Marineau <mike@marineau.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18x86: align x86 arch with generic CPU modalias handlingArd Biesheuvel1-5/+0
The x86 CPU feature modalias handling existed before it was reimplemented generically. This patch aligns the x86 handling so that it (a) reuses some more code that is now generic; (b) uses the generic format for the modalias module metadata entry, i.e., it now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of the 'x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:,XXXX,YYYY' that was used before. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18cpu: add generic support for CPU feature based module autoloadingArd Biesheuvel1-0/+8
This patch adds support for advertising optional CPU features over udev using the modalias, and for declaring compatibility with/dependency upon such a feature in a module. The mapping between feature numbers and actual features should be provided by the architecture in a file called <asm/cpufeature.h> which exports the following functions/macros: - cpu_feature(FEAT), a preprocessor macro that maps token FEAT to a numeric index; - bool cpu_have_feature(n), returning whether this CPU has support for feature #n; - MAX_CPU_FEATURES, an upper bound for 'n' in the previous function. The feature can then be enabled by setting CONFIG_GENERIC_CPU_AUTOPROBE for the architecture. For instance, a module that registers its module init function using module_cpu_feature_match(FEAT_X, module_init_function) will be probed automatically when the CPU's support for the 'FEAT_X' feature is advertised over udev, and will only allow the module to be loaded by hand if the 'FEAT_X' feature is supported. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>