summaryrefslogtreecommitdiffstats
path: root/drivers/auxdisplay
AgeCommit message (Collapse)AuthorFilesLines
2019-03-17auxdisplay: charlcd: make backlight initial state configurableMans Rullgard2-1/+30
The charlcd driver currently flashes the backlight once on init. This may not be desirable. Thus, add options for turning the backlight off or on as well. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: simplify init message displayMans Rullgard1-7/+8
If CONFIG_PANEL_CHANGE_MESSAGE is set, CONFIG_PANEL_BOOT_MESSAGE will also be defined, so the double ifdef is pointless. Simplify the code further by using an intermediate macro rather duplicating most of the line. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: deconfuse configurationMans Rullgard2-6/+13
The auxdisplay Kconfig is confusing. It creates two separate menus even though the settings are closely related. Moreover, the options for setting the boot message depend on CONFIG_PARPORT even though they are used by drivers that do not. Clear up the confusion by moving the "Parallel port LCD/Keypad" menu under auxdisplay where it logically belongs. Change the boot message options to depend only on CONFIG_CHARLCD, making them accessible also when only the HD44780 is selected. Since the "Parallel port LCD/Keypad" driver now has a new dependency on CONFIG_AUXDISPLAY, rename its Kconfig symbol and keep the old one such that make oldconfig will not disable the driver. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: hd44780: Convert to use charlcd_free()Andy Shevchenko1-2/+2
Convert to use charlcd_free() instead of kfree() for sake of type check. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: panel: Convert to use charlcd_free()Andy Shevchenko1-2/+2
Convert to use charlcd_free() instead of kfree() for sake of type check. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: Introduce charlcd_free() helperAndy Shevchenko1-0/+6
The charlcd_free() is a counterpart to charlcd_alloc() and should be called symmetrically on tear down. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: Move to_priv() to charlcd namespaceAndy Shevchenko1-13/+13
In order to be more particular in names, rename to_priv() macro to charlcd_to_priv(). No functional change intended. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: hd44780: Fix memory leak on ->remove()Andy Shevchenko1-0/+2
We have to free on ->remove() the allocated resources on ->probe(). Fixes: d47d88361fee ("auxdisplay: Add HD44780 Character LCD support") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-02-15auxdisplay: ht16k33: fix potential user-after-free on module unloadMiguel Ojeda1-1/+1
On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running. From kernel/workqueue.c: The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it. Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/ Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-12-21auxdisplay: charlcd: fix x/y command parsingMans Rullgard1-0/+3
The x/y command parsing has been broken since commit 129957069e6a ("staging: panel: Fixed checkpatch warning about simple_strtoul()"). Commit b34050fadb86 ("auxdisplay: charlcd: Fix and clean up handling of x/y commands") fixed some problems by rewriting the parsing code, but also broke things further by removing the check for a complete command before attempting to parse it. As a result, parsing is terminated at the first x or y character. This reinstates the check for a final semicolon. Whereas the original code use strchr(), this is wasteful seeing as the semicolon is always at the end of the buffer. Thus check this character directly instead. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-11-01Merge tag 'compiler-attributes-for-linus-4.20-rc1' of ↵Linus Torvalds1-4/+3
https://github.com/ojeda/linux Pull compiler attribute updates from Miguel Ojeda: "This is an effort to disentangle the include/linux/compiler*.h headers and bring them up to date. The main idea behind the series is to use feature checking macros (i.e. __has_attribute) instead of compiler version checks (e.g. GCC_VERSION), which are compiler-agnostic (so they can be shared, reducing the size of compiler-specific headers) and version-agnostic. Other related improvements have been performed in the headers as well, which on top of the use of __has_attribute it has amounted to a significant simplification of these headers (e.g. GCC_VERSION is now only guarding a few non-attribute macros). This series should also help the efforts to support compiling the kernel with clang and icc. A fair amount of documentation and comments have also been added, clarified or removed; and the headers are now more readable, which should help kernel developers in general. The series was triggered due to the move to gcc >= 4.6. In turn, this series has also triggered Sparse to gain the ability to recognize __has_attribute on its own. Finally, the __nonstring variable attribute series has been also applied on top; plus two related patches from Nick Desaulniers for unreachable() that came a bit afterwards" * tag 'compiler-attributes-for-linus-4.20-rc1' of https://github.com/ojeda/linux: compiler-gcc: remove comment about gcc 4.5 from unreachable() compiler.h: update definition of unreachable() Compiler Attributes: ext4: remove local __nonstring definition Compiler Attributes: auxdisplay: panel: use __nonstring Compiler Attributes: enable -Wstringop-truncation on W=1 (gcc >= 8) Compiler Attributes: add support for __nonstring (gcc >= 8) Compiler Attributes: add MAINTAINERS entry Compiler Attributes: add Doc/process/programming-language.rst Compiler Attributes: remove uses of __attribute__ from compiler.h Compiler Attributes: KENTRY used twice the "used" attribute Compiler Attributes: use feature checks instead of version checks Compiler Attributes: add missing SPDX ID in compiler_types.h Compiler Attributes: remove unneeded sparse (__CHECKER__) tests Compiler Attributes: homogenize __must_be_array Compiler Attributes: remove unneeded tests Compiler Attributes: always use the extra-underscores syntax Compiler Attributes: remove unused attributes
2018-09-30Compiler Attributes: auxdisplay: panel: use __nonstringMiguel Ojeda1-4/+3
Let gcc know these arrays are not meant to be NUL-terminated by annotating them with the new __nonstring variable attribute; and remove the comment since it conveys the same information. Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # on top of v4.19-rc5, clang 7 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik1-4/+4
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik1-39/+20
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-01auxdisplay: simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-08-01auxdisplay: charlcd: delete mdelay in long_sleepJia-Ju Bai1-4/+1
The function long_sleep() calls mdelay() when in an interrupt handler. But only charlcd_clear_display() and charlcd_init_display calls long_sleep(), and my tool finds that the two functions are never called in an interrupt handler. Thus mdelay() and in_interrupt() are not necessary. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-12auxdisplay: Replace licenses with SPDX identifiersMiguel Ojeda8-70/+8
Cc: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Willy Tarreau <w@1wt.eu> Acked-by: Linus Walleij <triad@dflund.se> Acked-by: Robin van der Gracht <robin@protonic.nl> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: make PANEL a menuconfigRandy Dunlap1-1/+1
This change makes xconfig present the PANEL drivers immediately following the AUXDISPLAY drivers instead of under the major menu item "Device Drivers". It also unclutters the Device Drivers menu in nconfig and menuconfig by moving the PANEL drivers to a sub-menu. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: fix broken menuRandy Dunlap1-5/+5
Having the CHARLCD Kconfig symbol between "menuconfig AUXDISPLAY" and "if AUXDISPLAY" breaks the AUXDISPLAY submenus, so move the CHARLCD Kconfig symbol near the end of the file so that the menu display is continuous. Also include ARM_CHARLCD inside of the if AUXDISPLAY/endif block. Geert says that it should be there. Fixes: 39f8ea46724e ("auxdisplay: charlcd: Extract character LCD core from misc/panel") Cc: stable@vger.kernel.org # v4.12 Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: Fix and clean up handling of x/y commandsMiguel Ojeda1-17/+78
The current version is not parsing multiple x/y commands as the code originally intended. On top of that, kstrtoul() expects NULL-terminated strings. Finally, the code does two passes over the string. Some explanations about the supported syntax are added as well. Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: fix hex literal ranges for graphics commandRobert Abel1-2/+2
The graphics command expects 16 hexadecimal literals, but would allow characters in range [0-9a-zA-Z] instead of [0-9a-fA-F]. Signed-off-by: Robert Abel <rabel@robertabel.eu> Acked-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: fix two-line command ^[[LN not marked as processedRobert Abel1-0/+1
Signed-off-by: Robert Abel <rabel@robertabel.eu> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: replace octal literal with form-feed escape sequenceRobert Abel1-1/+1
There is no need to resort to octal escape sequence for the form feed character when an established escape sequence exists. Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: use null character instead of zero literal to terminate ↵Robert Abel1-2/+2
strings Using '\0' instead of plain 0 makes the intent clearer that this is indeed a string and not a series of integers. Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: no need to call charlcd_gotoxy() if nothing changesSean Young1-3/+4
If the line extends beyond the width to the screen, nothing changes. The existing code will call charlcd_gotoxy every time for this case. Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: cfag12864bfb: constify fb_fix_screeninfo and fb_var_screeninfo ↵Gustavo A. R. Silva1-2/+2
structures These structures are only used to copy into other structures, so declare them as const. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct fb_fix_screeninfo i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p @bad@ position p != {r.p,ok.p}; identifier r.i; struct fb_fix_screeninfo e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct fb_fix_screeninfo i = { ... }; The semantic patch for fb_var_screeninfo is analogous. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: img-ascii-lcd: fix typo on select SYSCON/MFD_SYSCONCorentin Labbe1-1/+1
img-ascii-lcd select un-existing SYSCON kconfig name. This patch fix this error by using the correct MFD_SYSCON kconfig name. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: img-ascii-lcd: kconfig: Remove MIPS_SEAD3 referenceUlf Magnusson1-1/+1
Commit 3f5f0a4475e1 ("MIPS: generic: Convert SEAD-3 to a generic board") removed the MIPS_SEAD3 symbol and moved the setting of IMG_ASCII_LCD to the board-sead-3.config defconfig file, but IMG_ASCII_LCD still references the removed MIPS_SEAD3 symbol. Remove the reference. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: arm-charlcd: Fix struct charlcd doc lineMiguel Ojeda1-0/+2
There was a missing first line and a missing member, which gave a warning under W=1: CC drivers/auxdisplay/arm-charlcd.o drivers/auxdisplay/arm-charlcd.c:57: warning: Cannot understand * @dev: a pointer back to containing device on line 57 - I thought it was a doc line Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: img-ascii-lcd: Silence 2 uninitialized warningsMiguel Ojeda1-2/+2
The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: img-ascii-lcd: Fix doc comment to silence warningsMiguel Ojeda1-1/+1
Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: panel: Change comments to silence fallthrough warningsMiguel Ojeda1-3/+3
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-01-10auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-27auxdisplay: img-ascii-lcd: Only build on archs that have IOMEMThomas Meyer1-0/+1
This avoids the MODPOST error: ERROR: "devm_ioremap_resource" [drivers/auxdisplay/img-ascii-lcd.ko] undefined! Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-03Update MIPS email addressesPaul Burton1-1/+1
MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02auxdisplay: Convert timers to use timer_setup()Kees Cook2-8/+6
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Paul Burton <paul.burton@imgtec.com> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Paul Burton <paul.burton@mips.com> Tested-by: Paul Burton <paul.burton@mips.com> # for img-ascii-lcd
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18auxdisplay: charlcd: properly restore atomic counter on error pathWilly Tarreau2-4/+18
Commit f4757af ("staging: panel: Fix single-open policy race condition") introduced in 3.19-rc1 attempted to fix a race condition on the open, but failed to properly do it and used to exit without restoring the semaphore. This results in -EBUSY being returned after the first open error until the module is reloaded or the system restarted (ie: consecutive to a dual open resulting in -EBUSY or to a permission error). [ Note for stable maintainers: the code moved from drivers/misc/panel.c to drivers/auxdisplay/{charlcd,panel}.c during 4.12. The patch easily applies there (modulo the renamed atomic counter) but I can provide a tested backport if desired. ] Fixes: f4757af85 # 3.19-rc1 Cc: stable@vger.kernel.org Cc: Mariusz Gorski <marius.gorski@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17auxdisplay: constify charlcd_ops.Arvind Yadav1-3/+3
charlcd_ops are not supposed to change at runtime. All functions working with charlcd_ops provided by <misc/charlcd.h> work with const charlcd_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 12750 560 362 13672 3568 drivers/auxdisplay/panel.o File size After adding 'const': text data bss dec hex filename 12942 368 362 13672 3568 drivers/auxdisplay/panel.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25auxdisplay: Convert list_for_each to entry variantWei Yongjun1-4/+1
convert list_for_each() to list_for_each_entry() where applicable. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folderAndy Shevchenko3-0/+379
It looks like arm-charlcd.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: Move panel.c to drivers/auxdisplay folderAndy Shevchenko3-0/+2077
It looks like panel.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: ht16k33: use le16_to_cpup() to fetch LE16 dataDmitry Torokhov1-4/+8
The data read from the device is 3 little-endian words, so let's annotate them as such and use le16_to_cpu() to convert them to host endianness - it might turn out to be a bit more performant, and it expresses the conversion more clearly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: img-ascii-lcd: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias $ After this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias alias: of:N*T*Cmti,sead3-lcdC* alias: of:N*T*Cmti,sead3-lcd alias: of:N*T*Cmti,malta-lcdC* alias: of:N*T*Cmti,malta-lcd alias: of:N*T*Cimg,boston-lcdC* alias: of:N*T*Cimg,boston-lcd Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: ht16k33: don't access uninitialized dataArnd Bergmann1-1/+7
gcc-7.0.1 points out that we copy uninitialized data from the stack into a per-device structure: drivers/auxdisplay/ht16k33.c: In function 'ht16k33_keypad_irq_thread': arch/x86/include/asm/string_32.h:78:16: error: 'new_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&new_state+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] The access is harmless because we never read the data, but we are better off not doing this, so this changes the code to only copy the data that was actually initialized. To make sure we don't overflow the stack with an incorrect DT, we also need to add a sanity checkin the probe function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: hd44780: Fix DT properties to include units of measurementGeert Uytterhoeven1-2/+3
DT properties specifying physical properties should contain appropriate suffices indicating the units of measurement. Hence amend the HD44780 DT bindings to add "chars" suffixes to the "display-height" and "display-width" properties, and update the driver to parse them. Fixes: dd9502a9e9156dd8 ("dt-bindings: auxdisplay: Add bindings for Hitachi HD44780") Fixes: d47d88361feea2ce ("auxdisplay: Add HD44780 Character LCD support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>