summaryrefslogtreecommitdiffstats
path: root/drivers/auxdisplay
AgeCommit message (Collapse)AuthorFilesLines
2019-09-17Merge tag 'docs-5.4' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "It's a somewhat calmer cycle for docs this time, as the churn of the mass RST conversion is happily mostly behind us. - A new document on reproducible builds. - We finally got around to zapping the documentation for hardware support that was removed in 2004; one doesn't want to rush these things. - The usual assortment of fixes, typo corrections, etc" * tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits) Documentation: kbuild: Add document about reproducible builds docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi] Documentation: Add "earlycon=sbi" to the admin guide doc:lock: remove reference to clever use of read-write lock devices.txt: improve entry for comedi (char major 98) docs: mtd: Update spi nor reference driver doc: arm64: fix grammar dtb placed in no attributes region Documentation: sysrq: don't recommend 'S' 'U' before 'B' mailmap: Update email address for Quentin Perret docs: ftrace: clarify when tracing is disabled by the trace file docs: process: fix broken link Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command Documentation/arm/sa1100: Remove some obsolete documentation docs/zh_CN: update Chinese howto.rst for latexdocs making Documentation: virt: Fix broken reference to virt tree's index docs: Fix typo on pull requests guide kernel-doc: Allow anonymous enum Documentation: sphinx: Don't parse socket() as identifier reference Documentation: sphinx: Add missing comma to list of strings ...
2019-08-20auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constantNishka Dasgupta1-2/+2
The static structures ht16k33_fb_fix and ht16k33_fb_var, of types fb_fix_screeninfo and fb_var_screeninfo respectively, are not used except to be copied into other variables. Hence make both of them constant to prevent unintended modification. Issue found with Coccinelle. Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-08auxdisplay: charlcd: add include guard to charlcd.hMasahiro Yamada1-0/+5
Add a header include guard just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-08auxdisplay: charlcd: move charlcd.h to drivers/auxdisplayMasahiro Yamada4-4/+42
This header is included in drivers/auxdisplay/. Make it a local header. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-05auxdisplay: charlcd: add help text for backlight initial stateMans Rullgard1-0/+5
While the individual CHARLCD_BL_xxx options have help texts, the menu itself does not. Fix this. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mans Rullgard <mans@mansr.com> [Added a bit more text to address Linus' suggestion] Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-05auxdisplay: panel: need to delete scan_timer when misc_register fails in ↵zhengbin1-0/+2
panel_attach In panel_attach, if misc_register fails, we need to delete scan_timer, which was setup in keypad_init->init_scan_timer. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-07-31docs: admin-guide: add auxdisplay files to it after conversion to ReSTMauro Carvalho Chehab1-1/+1
Those two files describe userspace-faced information. While part of it might fit on uAPI, it sounds to me that the admin guide is the best place for them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-20auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero()Souptick Joarder1-2/+2
While using mmap, the incorrect values of length and vm_pgoff are ignored and this driver goes ahead with mapping fbdev.buffer to user vma. Convert vm_insert_pages() to use vm_map_pages_zero(). We could later "fix" these drivers to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-06-20auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()Souptick Joarder1-2/+3
While using mmap, the incorrect values of length and vm_pgoff are ignored and this driver goes ahead with mapping cfag12864b_buffer to user vma. Convert vm_insert_pages() to use vm_map_pages_zero(). We could later "fix" these drivers to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-06-14docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-17auxdisplay: charlcd: make backlight initial state configurableMans Rullgard2-1/+30
The charlcd driver currently flashes the backlight once on init. This may not be desirable. Thus, add options for turning the backlight off or on as well. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: simplify init message displayMans Rullgard1-7/+8
If CONFIG_PANEL_CHANGE_MESSAGE is set, CONFIG_PANEL_BOOT_MESSAGE will also be defined, so the double ifdef is pointless. Simplify the code further by using an intermediate macro rather duplicating most of the line. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: deconfuse configurationMans Rullgard2-6/+13
The auxdisplay Kconfig is confusing. It creates two separate menus even though the settings are closely related. Moreover, the options for setting the boot message depend on CONFIG_PARPORT even though they are used by drivers that do not. Clear up the confusion by moving the "Parallel port LCD/Keypad" menu under auxdisplay where it logically belongs. Change the boot message options to depend only on CONFIG_CHARLCD, making them accessible also when only the HD44780 is selected. Since the "Parallel port LCD/Keypad" driver now has a new dependency on CONFIG_AUXDISPLAY, rename its Kconfig symbol and keep the old one such that make oldconfig will not disable the driver. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: hd44780: Convert to use charlcd_free()Andy Shevchenko1-2/+2
Convert to use charlcd_free() instead of kfree() for sake of type check. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: panel: Convert to use charlcd_free()Andy Shevchenko1-2/+2
Convert to use charlcd_free() instead of kfree() for sake of type check. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: Introduce charlcd_free() helperAndy Shevchenko1-0/+6
The charlcd_free() is a counterpart to charlcd_alloc() and should be called symmetrically on tear down. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: charlcd: Move to_priv() to charlcd namespaceAndy Shevchenko1-13/+13
In order to be more particular in names, rename to_priv() macro to charlcd_to_priv(). No functional change intended. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-03-17auxdisplay: hd44780: Fix memory leak on ->remove()Andy Shevchenko1-0/+2
We have to free on ->remove() the allocated resources on ->probe(). Fixes: d47d88361fee ("auxdisplay: Add HD44780 Character LCD support") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-02-15auxdisplay: ht16k33: fix potential user-after-free on module unloadMiguel Ojeda1-1/+1
On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running. From kernel/workqueue.c: The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it. Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/ Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-12-21auxdisplay: charlcd: fix x/y command parsingMans Rullgard1-0/+3
The x/y command parsing has been broken since commit 129957069e6a ("staging: panel: Fixed checkpatch warning about simple_strtoul()"). Commit b34050fadb86 ("auxdisplay: charlcd: Fix and clean up handling of x/y commands") fixed some problems by rewriting the parsing code, but also broke things further by removing the check for a complete command before attempting to parse it. As a result, parsing is terminated at the first x or y character. This reinstates the check for a final semicolon. Whereas the original code use strchr(), this is wasteful seeing as the semicolon is always at the end of the buffer. Thus check this character directly instead. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-11-01Merge tag 'compiler-attributes-for-linus-4.20-rc1' of ↵Linus Torvalds1-4/+3
https://github.com/ojeda/linux Pull compiler attribute updates from Miguel Ojeda: "This is an effort to disentangle the include/linux/compiler*.h headers and bring them up to date. The main idea behind the series is to use feature checking macros (i.e. __has_attribute) instead of compiler version checks (e.g. GCC_VERSION), which are compiler-agnostic (so they can be shared, reducing the size of compiler-specific headers) and version-agnostic. Other related improvements have been performed in the headers as well, which on top of the use of __has_attribute it has amounted to a significant simplification of these headers (e.g. GCC_VERSION is now only guarding a few non-attribute macros). This series should also help the efforts to support compiling the kernel with clang and icc. A fair amount of documentation and comments have also been added, clarified or removed; and the headers are now more readable, which should help kernel developers in general. The series was triggered due to the move to gcc >= 4.6. In turn, this series has also triggered Sparse to gain the ability to recognize __has_attribute on its own. Finally, the __nonstring variable attribute series has been also applied on top; plus two related patches from Nick Desaulniers for unreachable() that came a bit afterwards" * tag 'compiler-attributes-for-linus-4.20-rc1' of https://github.com/ojeda/linux: compiler-gcc: remove comment about gcc 4.5 from unreachable() compiler.h: update definition of unreachable() Compiler Attributes: ext4: remove local __nonstring definition Compiler Attributes: auxdisplay: panel: use __nonstring Compiler Attributes: enable -Wstringop-truncation on W=1 (gcc >= 8) Compiler Attributes: add support for __nonstring (gcc >= 8) Compiler Attributes: add MAINTAINERS entry Compiler Attributes: add Doc/process/programming-language.rst Compiler Attributes: remove uses of __attribute__ from compiler.h Compiler Attributes: KENTRY used twice the "used" attribute Compiler Attributes: use feature checks instead of version checks Compiler Attributes: add missing SPDX ID in compiler_types.h Compiler Attributes: remove unneeded sparse (__CHECKER__) tests Compiler Attributes: homogenize __must_be_array Compiler Attributes: remove unneeded tests Compiler Attributes: always use the extra-underscores syntax Compiler Attributes: remove unused attributes
2018-09-30Compiler Attributes: auxdisplay: panel: use __nonstringMiguel Ojeda1-4/+3
Let gcc know these arrays are not meant to be NUL-terminated by annotating them with the new __nonstring variable attribute; and remove the comment since it conveys the same information. Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # on top of v4.19-rc5, clang 7 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik1-4/+4
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik1-39/+20
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-01auxdisplay: simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-08-01auxdisplay: charlcd: delete mdelay in long_sleepJia-Ju Bai1-4/+1
The function long_sleep() calls mdelay() when in an interrupt handler. But only charlcd_clear_display() and charlcd_init_display calls long_sleep(), and my tool finds that the two functions are never called in an interrupt handler. Thus mdelay() and in_interrupt() are not necessary. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-12auxdisplay: Replace licenses with SPDX identifiersMiguel Ojeda8-70/+8
Cc: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Willy Tarreau <w@1wt.eu> Acked-by: Linus Walleij <triad@dflund.se> Acked-by: Robin van der Gracht <robin@protonic.nl> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: make PANEL a menuconfigRandy Dunlap1-1/+1
This change makes xconfig present the PANEL drivers immediately following the AUXDISPLAY drivers instead of under the major menu item "Device Drivers". It also unclutters the Device Drivers menu in nconfig and menuconfig by moving the PANEL drivers to a sub-menu. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: fix broken menuRandy Dunlap1-5/+5
Having the CHARLCD Kconfig symbol between "menuconfig AUXDISPLAY" and "if AUXDISPLAY" breaks the AUXDISPLAY submenus, so move the CHARLCD Kconfig symbol near the end of the file so that the menu display is continuous. Also include ARM_CHARLCD inside of the if AUXDISPLAY/endif block. Geert says that it should be there. Fixes: 39f8ea46724e ("auxdisplay: charlcd: Extract character LCD core from misc/panel") Cc: stable@vger.kernel.org # v4.12 Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: Fix and clean up handling of x/y commandsMiguel Ojeda1-17/+78
The current version is not parsing multiple x/y commands as the code originally intended. On top of that, kstrtoul() expects NULL-terminated strings. Finally, the code does two passes over the string. Some explanations about the supported syntax are added as well. Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: fix hex literal ranges for graphics commandRobert Abel1-2/+2
The graphics command expects 16 hexadecimal literals, but would allow characters in range [0-9a-zA-Z] instead of [0-9a-fA-F]. Signed-off-by: Robert Abel <rabel@robertabel.eu> Acked-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: fix two-line command ^[[LN not marked as processedRobert Abel1-0/+1
Signed-off-by: Robert Abel <rabel@robertabel.eu> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: replace octal literal with form-feed escape sequenceRobert Abel1-1/+1
There is no need to resort to octal escape sequence for the form feed character when an established escape sequence exists. Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: use null character instead of zero literal to terminate ↵Robert Abel1-2/+2
strings Using '\0' instead of plain 0 makes the intent clearer that this is indeed a string and not a series of integers. Signed-off-by: Robert Abel <rabel@robertabel.eu> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: charlcd: no need to call charlcd_gotoxy() if nothing changesSean Young1-3/+4
If the line extends beyond the width to the screen, nothing changes. The existing code will call charlcd_gotoxy every time for this case. Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: cfag12864bfb: constify fb_fix_screeninfo and fb_var_screeninfo ↵Gustavo A. R. Silva1-2/+2
structures These structures are only used to copy into other structures, so declare them as const. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct fb_fix_screeninfo i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p @bad@ position p != {r.p,ok.p}; identifier r.i; struct fb_fix_screeninfo e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct fb_fix_screeninfo i = { ... }; The semantic patch for fb_var_screeninfo is analogous. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: img-ascii-lcd: fix typo on select SYSCON/MFD_SYSCONCorentin Labbe1-1/+1
img-ascii-lcd select un-existing SYSCON kconfig name. This patch fix this error by using the correct MFD_SYSCON kconfig name. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: img-ascii-lcd: kconfig: Remove MIPS_SEAD3 referenceUlf Magnusson1-1/+1
Commit 3f5f0a4475e1 ("MIPS: generic: Convert SEAD-3 to a generic board") removed the MIPS_SEAD3 symbol and moved the setting of IMG_ASCII_LCD to the board-sead-3.config defconfig file, but IMG_ASCII_LCD still references the removed MIPS_SEAD3 symbol. Remove the reference. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-04-12auxdisplay: arm-charlcd: Fix struct charlcd doc lineMiguel Ojeda1-0/+2
There was a missing first line and a missing member, which gave a warning under W=1: CC drivers/auxdisplay/arm-charlcd.o drivers/auxdisplay/arm-charlcd.c:57: warning: Cannot understand * @dev: a pointer back to containing device on line 57 - I thought it was a doc line Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: img-ascii-lcd: Silence 2 uninitialized warningsMiguel Ojeda1-2/+2
The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: img-ascii-lcd: Fix doc comment to silence warningsMiguel Ojeda1-1/+1
Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: panel: Change comments to silence fallthrough warningsMiguel Ojeda1-3/+3
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-01-10auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-27auxdisplay: img-ascii-lcd: Only build on archs that have IOMEMThomas Meyer1-0/+1
This avoids the MODPOST error: ERROR: "devm_ioremap_resource" [drivers/auxdisplay/img-ascii-lcd.ko] undefined! Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...