summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2016-07-27Merge tag 'leds_for_4.8' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-26Merge branch 'for-4.8' of ↵Linus Torvalds14-76/+129
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
2016-07-23Merge branch 'for-4.7-fixes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fix from Tejun Heo: "Another fallout from max_sectors bump a couple years ago. The lite-on optical drive times out on large requests" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: LITE-ON CX1-JB256-HP needs lower max_sectors
2016-07-20libata-scsi: better style in ata_msense_*()Tom Yan1-6/+13
`changeable` is the "version" of mode page requested by the user. It will be less confusing/misleading if we do not check it "together" with the setting bits of the drive. Not to mention that we currently have ata_mselect_*() implemented in a way that each of them will serve exclusively a particular bit on each page. The old style will hence make the condition look even more unnecessarily arcane if the ata_msense_*() is reflecting more than one bit. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-20AHCI: Clear GHC.IS to prevent unexpectly asserting INTxPang Raymond1-0/+8
Due to PCI subsystem behaviour, unloading AHCI driver will disable MSI and enable INTx. When HBA supports MSIx or Multiple MSI, Driver's irq handler doesn't clear GHC.IS register. It works well when reading or writing data and GHC.IS is always non-zero. But when unloading driver (or any other operation which causes disable MSIx and enable INTx), PCI subsystem uses config write(Rx04.bit10) to enable INTx. Because GHC.IS is non-zero, HBA will falsely assume some port needs interrupt service. Then it asserts INTx. To make things worse, when AHCI controller shares the same interrupt pin with other PCI device, that PCI device's ISR will be called and nobody de-asserts previous INTx. This patch clears GHC.IS in ahci_port_stop() even when using MSIx or MMSI to prevent this case. It ensures GHC.IS is zero before PCI subsystem enables INTx. tj: Minor updates to the comment. Signed-off-by: Raymond Pang <raymond_rule@hotmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-19ata: sata_dwc_460ex: remove redundant dev_err callWei Yongjun1-8/+2
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*Christoph Hellwig1-1/+1
This avoid the need to always translate between the two in ata_prot_flags and generally cleans up the taskfile protocol usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18libata: remove ata_is_nodataChristoph Hellwig1-1/+1
The only caller can just check for !ata_is_data instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18libata: LITE-ON CX1-JB256-HP needs lower max_sectorsTejun Heo1-0/+6
Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Cc: stable@vger.kernel.org # v3.19+ Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: minor cleanup for ata_scsi_zbc_out_xlatDamien Le Moal1-4/+4
The reset_all variable name is misleading as this bit is also applicable to open, close, and finish actions. So rename that variable to "all" and remove the unnecessary mask operation that's already done earlier. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: split from the previous patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: Fix ZBC management out command translationDamien Le Moal1-2/+2
The subcommand for NCQ NON-DATA must be specified in the feature (low byte), not the high-order count byte. Also make sure to properly cast the all bit to a u16 before shiting it by 8 to avoid undefined behavior. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: split the original patch into two, updated changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15libata-scsi: Fix translation of REPORT ZONES commandDamien Le Moal1-2/+2
Include reporting options when translating REPORT ZONES commmand to ATA NCQ, and make sure we only look at the actually specified bits in the CDB for the options. Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> [hch: update patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15ata: Handle ATA NCQ NO-DATA commands correctlyHannes Reinecke3-2/+8
Add a new taskfile protocol ATA_PROT_NCQ_NODATA to handle ATA NCQ NO-DATA commands correctly. And fixup ata_scsi_zbc_out_xlat() to use it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14libata-eh: decode all taskfile protocolsHannes Reinecke1-0/+3
Some taskfile protocol values where missing in ata_eh_link_report(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14ata: fixup ATA_PROT_NODATAHannes Reinecke2-3/+3
The taskfile protocol is a numeric value, and can not be ORed. Currently this is harmless as the protocol is always zeroed before, but if it ever has a non-zero value the ORing would create incorrect results. Signed-off-by: Hannes Reinecke <hare@suse.de> [hch: updated patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14libata: use ata_is_ncq() accessorsHannes Reinecke3-5/+5
Use accessor functions instead of the raw value. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: avoid repeated calculation of number of TRIM rangesTom Yan1-3/+3
Currently libata statically allows only 1-block (512-byte) payload for each TRIM command. Each payload can carry 64 TRIM ranges since each range requires 8 bytes. It is silly to keep doing the calculation (512 / 8) in different places. Hence, define the new ATA_MAX_TRIM_RNUM for the result. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: reject WRITE SAME (16) with n_block that exceeds limitTom Yan1-1/+7
Currently if a WRITE SAME (16) command is issued to the SATL with "number of blocks" that is larger than the "Maximum write same length" (which is the maximum number of blocks per TRIM command allowed in libata, currently 65535 * 512 / 8 blocks), the SATL will accept the command and translate it to a TRIM command with the upper limit. However, according to SBC (as of sbc4r11.pdf), the "device server" should terminate the command with "Invalid field in CDB" in that case. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()Tom Yan1-5/+5
To make it consistent with the recently added ata_mselect_control(). We probably shouldn't have the word "mode" in its name anyway, since that's not the case for other ata_msense_*() / ata_mselect_*() either. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: fix D_SENSE bit relection in control mode pageTom Yan1-1/+1
The bit should always be set to 1 when the requested version of page is "changeable" because we've made it so in ata_mselect_control(). Also, it should always be set to 1 if ATA_DFLAG_D_SENSE is set (when the requested version of page is "current" or "default"). Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12ata: hpt366: fix incorrect mask when checking at cmd_high_timeColin Ian King1-1/+1
According to the HPT366 data sheet, PCI config space dword 0x40-0x43 bits 11:8 specify the primary drive cmd_high_time, however, currently just 3 bits of the 4 are being used because the mask is 0x700 and not 0x0f00. Fix the mask, allowing for the 40MHz clock to be detected. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: correct SPC version descriptorTom Yan1-2/+2
The comment suggests we should be having an SPC-3 version descriptor but the 0260h is the code for "SPC-2 (no version claimed)". Correct it to 0300h so that it has the "SPC-3 (no version claimed)" descriptor. Note that we are claiming SPC-3 version compatibility in the VERSION field of the standard INQUIRY data. Therefore, I assume the typo was on the code but not on the comment. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: set CmdQue bit in standard INQUIRY data to 1Tom Yan1-1/+4
Avoid performance bottleneck when being SCSI pass-through'd to virtual machines with other OSes (e.g. Windows) via virtio-scsi and scsi-block in qemu. Ref.: https://github.com/YanVugenfirer/kvm-guest-drivers-windows/issues/63 Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: fix SET FEATURES "filtering" for ata_msense_caching()Tom Yan1-1/+3
Without this fix, the DRA bit of the caching mode page would not be updated when the read look-ahead feature is toggled (e.g. with `smartctl --set`), but will only be until, for example, the write cache feature is touched. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: set correct VERSION field for ZAC devicesTom Yan1-1/+3
Commit 856c46639309 ("libata: support device-managed ZAC devices") had the line that "bumps" the VERSION field in standard INQUIRY data removed. Add it back and claim SPC-5 version compatibility, which matches with the current version descriptor "SPC-5 (no version claimed)" that is used for ZAC devices. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06libata-scsi: correct cbd to CDB in commentTom Yan1-1/+1
It's Command Descriptor Block. Also capitalized it. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06libata-scsi: do not respond with "invalid field" for FORMAT UNITTom Yan1-5/+0
It does not make sense and is confusing to respond with "Invalid field in CDB" while we have no support at all implemented for FORMAT UNIT. It is decent to let it go to the default, which will respond with "Invalid command operation code" instead. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-28Merge branch 'for-4.7-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Two trivial fixes - one for a bug in the allocation failure path and the other a compiler warning fix" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: sata_mv: fix mis-conversion in mv_write_cached_reg() ata: fix return value check in ahci_seattle_get_port_info()
2016-06-28drivers: ata: pata_arasan_cf: use the same name for the same lockIago Abal1-1/+1
Note that `&acdev->host->lock' and `qc->ap->lock' denote the same lock, and it's particularly confusing to spin_lock on the former but spin_unlock on the latter. Signed-off-by: Iago Abal <mail@iagoabal.eu> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-20leds: convert IDE trigger to common disk triggerStephan Linz1-0/+4
This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-18Merge remote-tracking branch 'mkp-scsi/4.7/scsi-fixes' into fixesJames Bottomley1-1/+1
2016-06-17ata: sata_mv: fix mis-conversion in mv_write_cached_reg()Ben Dooks1-1/+1
Fix the signed issue in mv_write_cached_reg() where the laddr is assigned from a (long)addr instead of (unsigned long)addr. Fixes the following warnings: drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-17ata: fix "ering" sysfs time printingArnd Bergmann1-4/+5
The sysfs file for the libata error handling has multiple issues in the way it prints time stamps: * it prints a 9-digit nanosecond value using a %06lu format string, which drops some leading zeroes * it converts a 64-bit jiffes value to a timespec using jiffies_to_timespec(), which takes a 'long' argument, so the result is wrong after a jiffies overflow (49 days). * we try to avoid using timespec because that generally overflows in 2038, although this particular usage is ok. This replaces the jiffies_to_timespec call with an open-coded implementation that gets it right. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-16ata: ahci_brcm: Add support for Broadcom NSP SoCYendapally Reddy Dhananjaya Reddy2-11/+37
Add SATA3 support for Broadcom NSP SoC Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-16ata: ahci_brcmstb: rename to support across Broadcom SoC'sYendapally Reddy Dhananjaya Reddy3-4/+4
Rename the existing Broadcom STB ahci driver to common Broadcom SATA3 driver to share this across Broadcom SoCs. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-15ata: fix return value check in ahci_seattle_get_port_info()Wei Yongjun1-1/+1
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-08scsi: fix race between simultaneous decrements of ->host_failedWei Fang1-1/+1
sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <fangwei1@huawei.com> Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-06-07block, drivers, cgroup: use op_is_write helper instead of checking for REQ_WRITEMike Christie1-1/+1
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This patch converts the drivers and cgroup to use the op_is_write helper. This should just cover the simple cases. I did dm, md and bcache in their own patches because they were more involved. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann1-1/+1
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ata: Use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas2-2/+2
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-27pata_atiixp: fix trivial indentation misalignment on if statementColin Ian King1-2/+2
Remove extraneous space on if statement and on the following line, trivial fix, no functional change Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-23Merge branch 'for-4.7-dw' of ↵Linus Torvalds2-271/+294
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata sata_dwc_460ex updates from Tejun Heo: "Patches to bring sata_dwc_460ex up to snuff. It was a separate pull request because it depends on dmaengine dw platform changes which are now in mainline" * 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits) ata: dwc: add DMADEVICES dependency powerpc/4xx: Device tree update for the 460ex DWC SATA ata: sata_dwc_460ex: make debug messages neat ata: sata_dwc_460ex: supply physical address of FIFO to DMA ata: sata_dwc_460ex: use devm_ioremap ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr() ata: sata_dwc_460ex: use readl/writel_relaxed() ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API ata: sata_dwc_460ex: add __iomem to register base pointer ata: sata_dwc_460ex: get rid of incorrect cast ata: sata_dwc_460ex: get rid of some pointless casts ata: sata_dwc_460ex: remove empty libata callback ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros ata: sata_dwc_460ex: get rid of global data ata: sata_dwc_460ex: add phy support ata: sata_dwc_460ex: use "dmas" DT property to find dma channel ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands ata: sata_dwc_460ex: skip dma setup for non-dma commands ata: sata_dwc_460ex: select only core part of DMA driver ata: sata_dwc_460ex: DMA is always a flow controller ...
2016-05-23Merge branch 'for-4.7-zac' of ↵Linus Torvalds5-171/+989
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata ZAC support from Tejun Heo: "This contains Zone ATA Command support for Shingled Magnetic Recording devices. In addition to sending the new commands down to the device, as ZAC commands depend on getting a lot of responses from the device, piping up responses is beefed up too. However, it doesn't involve changes to libata core mechanism or its interaction with upper layers, so I'm not expecting too many fallouts. Kudos to Hannes for driving SMR support" * 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits) libata: support host-aware and host-managed ZAC devices libata: support device-managed ZAC devices libata: NCQ encapsulation for ZAC MANAGEMENT OUT libata: Implement ZBC OUT translation libata: implement ZBC IN translation libata: fixup ZAC device disabling libata-scsi: Generate sense code for disabled devices libata-trace: decode subcommands libata: Check log page directory before accessing pages libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT libata: Separate out ata_dev_config_ncq_send_recv() libata/libsas: Define ATA_CMD_NCQ_NON_DATA libsas: enable FPDMA SEND/RECEIVE libata: do not attempt to retrieve sense code twice libata-scsi: Set information sense field for invalid parameter libata-scsi: set bit pointer for sense code information libata-scsi: Set field pointer in sense code scsi: add scsi_set_sense_field_pointer() libata: Implement control mode page to select sense format libata-scsi: generate correct ATA pass-through sense ...
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-3/+3
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-05-18Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "First round of SCSI updates for the 4.6+ merge window. This batch includes the usual quota of driver updates (bnx2fc, mp3sas, hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas). There's also a multiqueue update for scsi_debug, assorted bug fixes and a few other minor updates (refactor of scsi_sg_pools into generic code, alua and VPD updates, and struct timeval conversions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs mpt3sas: Set maximum transfer length per IO to 4MB for VDs mpt3sas: Updating mpt3sas driver version to 13.100.00.00 mpt3sas: Fix initial Reference tag field for 4K PI drives. mpt3sas: Handle active cable exception event mpt3sas: Update MPI header to 2.00.42 Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy" eata_pio: missing break statement hpsa: Fix type ZBC conditional checks scsi_lib: Decode T10 vendor IDs scsi_dh_alua: do not fail for unknown VPD identification scsi_debug: use locally assigned naa scsi_debug: uuid for lu name scsi_debug: vpd and mode page work scsi_debug: add multiple queue support bfa: fix bfa_fcb_itnim_alloc() error handling megaraid_sas: Downgrade two success messages to info cxlflash: Fix to resolve dead-lock during EEH recovery scsi_debug: rework resp_report_luns scsi_debug: use pdt constants ...
2016-05-13Merge branch 'for-4.6-fixes' into for-4.7Tejun Heo5-0/+223
2016-05-12ata: dwc: add DMADEVICES dependencyArnd Bergmann1-0/+1
The dwc_460ex SATA driver has become available on non-powerpc architectures and may cause randconfig build errors when CONFIG_DMADEVICES is not set and SATA_DWC_OLD_DMA is enabled: warning: (SATA_DWC_OLD_DMA) selects DW_DMAC_CORE which has unmet direct dependencies (DMADEVICES) ERROR: "dw_dma_probe" [drivers/ata/sata_dwc_460ex.ko] undefined! ERROR: "dw_dma_remove" [drivers/ata/sata_dwc_460ex.ko] undefined! This adds an explcit Kconfig dependency to CONFIG_SATA_DWC so we cannot run into broken configurations. While it would also be possible to build the driver with both CONFIG_DMADEVICES and SATA_DWC_OLD_DMA disabled, that case is not useful because there is no fallback to PIO mode when the DMA engine is not usable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 50b433753df6 ("ata: sata_dwc_460ex: use "dmas" DT property to find dma channel") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: make debug messages neatAndy Shevchenko1-4/+4
There is a duplication in the debug messages when accessing SCR registers. Remove duplication to make the messages neat. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: supply physical address of FIFO to DMAAndy Shevchenko1-6/+7
DMA operates with physical addresses which is not exactly the same as ioremap() returns. Introduce variable to keep physical address of the SATA FIFO register and supply it when prepare DMA channel. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>