summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2020-04-23ata: sata_inic162x fix a spelling issueJohn Oldman1-1/+1
Fixed a warning message spelling issue. Signed-off-by: John Oldman <john.oldman@polehill.co.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-16ahci: Add Intel Comet Lake PCH-U PCI IDKai-Heng Feng1-0/+1
Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers. Set default SATA LPM so the SoC can enter S0ix. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-09ahci: Add Intel Comet Lake PCH RAID PCI IDJian-Hong Pan1-0/+1
Intel Comet Lake should use the default LPM policy for mobile chipsets. So, add the PCI ID to the driver list of supported devices. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07ata: ahci: Add sysfs attribute to show remapped NVMe device countKai-Heng Feng2-4/+25
Add a new sysfs attribute to show how many NVMe devices are remapped. Userspace like distro installer can use this info to ask user to change the BIOS setting. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07ata: ahci-imx: remove redundant assignment to retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07libata: Return correct status in sata_pmp_eh_recover_pm() when ↵Kai-Heng Feng1-0/+1
ATA_DFLAG_DETACH is set During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: make "libata.force" kernel parameter optionalBartlomiej Zolnierkiewicz3-2/+40
Add ATA_FORCE config option (visible only if EXPERT config option is enabled) and make "libata.force" kernel parameter optional. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename w/ CONFIG_ATA_FORCE=y: 31983 572 40 32595 7f53 drivers/ata/libata-core.o w/ CONFIG_ATA_FROCE=n: 28958 316 32 29306 727a drivers/ata/libata-core.o Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.cBartlomiej Zolnierkiewicz2-131/+131
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to libata-sata.c * add static inline for ata_eh_analyze_ncq_error() for CONFIG_SATA_HOST=n case (link->sactive is non-zero only if NCQ commands are actually queued so empty function body is sufficient) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o after: 15446 18 0 15464 3c68 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-eh.cBartlomiej Zolnierkiewicz2-74/+75
Start separating SATA specific code from libata-eh.c: * move sata_async_notification() to libata-sata.c: Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16243 18 0 16261 3f85 drivers/ata/libata-eh.o after: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_sas_*() to libata-sata.cBartlomiej Zolnierkiewicz3-221/+233
* un-inline: - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * un-static: - ata_scsi_sdev_config() - ata_scsi_dev_config() - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * move ata_sas_*() to libata-sata.c: * add static inlines for CONFIG_SATA_HOST=n case for ata_sas_{allocate,free}_tag() Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o after: 18330 23 576 18929 49f1 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-scsi.cBartlomiej Zolnierkiewicz3-300/+301
Start separating SATA specific code from libata-scsi.c: * un-static ata_scsi_find_dev() * move following code to libata-sata.c: - SATA only sysfs device attributes handling - __ata_change_queue_depth() - ata_scsi_change_queue_depth() * cover with CONFIG_SATA_HOST ifdef SATA only sysfs device attributes handling code and ATA_SHT_NCQ() macro in <linux/libata.h> Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20702 105 576 21383 5387 drivers/ata/libata-scsi.o after: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_deb_timing_*() to libata-sata.cBartlomiej Zolnierkiewicz2-8/+8
* move sata_deb_timing_*() to libata-sata.c * add static inline for sata_ehc_deb_timing() for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32158 572 40 32770 8002 drivers/ata/libata-core.o after: 32015 572 40 32627 7f73 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_qc_complete_multiple() to libata-sata.cBartlomiej Zolnierkiewicz2-59/+59
* move ata_qc_complete_multiple() to libata-sata.c Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32559 572 40 33171 8193 drivers/ata/libata-core.o after: 32162 572 40 32774 8006 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_hardreset() to libata-sata.cBartlomiej Zolnierkiewicz3-121/+114
* move sata_link_hardreset() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case * make sata_set_spd_needed() static Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32724 572 40 33336 8238 drivers/ata/libata-core.o after: 32559 572 40 33171 8193 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_{debounce,resume}() to libata-sata.cBartlomiej Zolnierkiewicz2-138/+138
* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move *sata_set_spd*() to libata-sata.cBartlomiej Zolnierkiewicz3-81/+88
* move *sata_set_spd*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32842 572 40 33458 82ae drivers/ata/libata-core.o after: 32812 572 40 33428 8290 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz2-109/+109
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz3-245/+259
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hostsBartlomiej Zolnierkiewicz1-1/+2
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow compiler to optimize out the function for non-SATA configs (for PATA hosts "ap && !ap->ops->set_lpm" condition is always true so it's sufficient for the function to return zero). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 17353 18 0 17371 43db drivers/ata/libata-eh.o after: 16607 18 0 16625 40f1 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hostsBartlomiej Zolnierkiewicz1-0/+2
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow compiler to optimize out the function for non-SATA configs. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36462 572 40 37074 90d2 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz4-181/+216
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: fix CodingStyle issues in PATA timings codeBartlomiej Zolnierkiewicz1-15/+27
* fix the overly long line in ata_timing_quantize() * use standard kernel CodingStyle in ata_timing_merge() * do not use assignment in if condition in ata_timing_compute() * fix non-standard comment style in ata_timing_compute() Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove EXPORT_SYMBOL_GPL()s not used by modulesBartlomiej Zolnierkiewicz3-10/+0
Remove EXPORT_SYMBOL_GPL()s for functions used only by the core libata code. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39838 573 40 40451 9e03 drivers/ata/libata-core.o 21071 105 576 21752 54f8 drivers/ata/libata-scsi.o 17519 18 0 17537 4481 drivers/ata/libata-eh.o after: 39688 573 40 40301 9d6d drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move EXPORT_SYMBOL_GPL()s close to exported codeBartlomiej Zolnierkiewicz3-127/+109
Move EXPORT_SYMBOL_GPL()s close to exported code like it is done in other kernel subsystems. As a nice side effect this results in the removal of few ifdefs. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize ata_scsi_rbuf[] sizeBartlomiej Zolnierkiewicz1-1/+1
Currently the maximum required size of the ata_scsi_rbuf[] is 576 bytes in ata_scsiop_inq_89() so modify ATA_SCSI_RBUF_SIZE define accordingly. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o after: 20782 105 576 21463 53d7 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize struct ata_force_param sizeBartlomiej Zolnierkiewicz1-3/+3
Optimize struct ata_force_param size by: - using u8 for cbl and spd_limit fields - using u16 for lflags field Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 573 40 41677 a2cd drivers/ata/libata-core.o after: 40654 573 40 41267 a133 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] sizeBartlomiej Zolnierkiewicz1-1/+2
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[] size as libata parameters buffer doesn't need to be bigger than the command line buffer. For many architectures this results in decreased libata-core.o size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum PAGE_SIZE is 4096). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 4413 40 45517 b1cd drivers/ata/libata-core.o after: 41064 573 40 41677 a2cd drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: simplify ata_scsiop_inq_89()Bartlomiej Zolnierkiewicz1-11/+7
Initialize rbuf[] directly instead of using ata_tf_to_fis(). This results in simpler and smaller code. It also allows separating ata_tf_to_fis() into SATA specific libata part in the future. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20824 105 4096 25025 61c1 drivers/ata/libata-scsi.o after: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26sata_promise: use ata_cable_sata()Bartlomiej Zolnierkiewicz1-7/+1
Use core helper instead of open-coding it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: make SATA_PMP option selectable only if any SATA host driver is enabledBartlomiej Zolnierkiewicz1-0/+40
There is no reason to expose SATA_PMP config option when no SATA host drivers are enabled. To fix it add SATA_HOST config option, make all SATA host drivers select it and finally make SATA_PMP config options depend on it. This also serves as preparation for the future changes which optimize libata core code size on PATA only setups. CC: "James E.J. Bottomley" <jejb@linux.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hostsBartlomiej Zolnierkiewicz1-1/+7
There is no point in exposing ncq_enable_prio sysfs attribute for devices on PATA and non-NCQ capable SATA hosts so: * remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[] * add ata_ncq_sdev_attrs[] * update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove stale maintainership information from core codeBartlomiej Zolnierkiewicz4-16/+0
In commit 7634ccd2da97 ("libata: maintainership update") from 2018 Jens has officially taken over libata maintainership from Tejun so remove stale information from core libata code. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25ahci: Add Intel Comet Lake PCH-V PCI IDMika Westerberg1-0/+1
Add Intel Comet Lake PCH-V PCI ID to the list of supported controllers. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25ahci: Add Intel Comet Lake PCH-H PCI IDMika Westerberg1-0/+1
Add Intel Comet Lake PCH-H PCI ID to the list of supported controllers. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25libata: Assign OF node to the SCSI deviceLinus Walleij1-0/+30
When we spawn a SCSI device from an ATA device in libata-scsi the SCSI device had no relation to the device tree. The DT binding allows us to define port nodes under a PATA (IDE) or SATA host controller, so we can have proper device nodes for these devices. If OF is enabled, walk the children of the host controller node to see if there is a valid device tree node to assign. The reg is used to match to ID 0 for the master device and ID 1 for the slave device. The corresponding device tree bindings have been accepted by the device tree maintainers. Cc: Chris Healy <cphealy@gmail.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()John Garry1-6/+3
If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails, then we may get use-after-free KASAN warns: ================================================================== BUG: KASAN: use-after-free in kobject_put+0x24/0x180 Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc3-00004-g5a71b206ea82-dirty #1765 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020 Call trace: dump_backtrace+0x0/0x298 show_stack+0x14/0x20 dump_stack+0x118/0x190 print_address_description.isra.9+0x6c/0x3b8 __kasan_report+0x134/0x23c kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 kobject_put+0x24/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_devres_release+0x74/0xb0 release_nodes+0x2d0/0x470 devres_release_all+0x50/0x78 really_probe+0x2d4/0x560 driver_probe_device+0x7c/0x148 device_driver_attach+0x94/0xa0 __driver_attach+0xa8/0x110 bus_for_each_dev+0xe8/0x158 driver_attach+0x30/0x40 bus_add_driver+0x220/0x2e0 driver_register+0xbc/0x1d0 __pci_register_driver+0xbc/0xd0 ahci_pci_driver_init+0x20/0x28 do_one_initcall+0xf0/0x608 kernel_init_freeable+0x31c/0x384 kernel_init+0x10/0x118 ret_from_fork+0x10/0x18 Allocated by task 5: save_stack+0x28/0xc8 __kasan_kmalloc.isra.8+0xbc/0xd8 kasan_kmalloc+0xc/0x18 __kmalloc+0x1a8/0x280 scsi_host_alloc+0x44/0x678 ata_scsi_add_hosts+0x74/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 Freed by task 5: save_stack+0x28/0xc8 __kasan_slab_free+0x118/0x180 kasan_slab_free+0x10/0x18 slab_free_freelist_hook+0xa4/0x1a0 kfree+0xd4/0x3a0 scsi_host_dev_release+0x100/0x148 device_release+0x7c/0xe0 kobject_put+0xb0/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_scsi_add_hosts+0x210/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 There is also refcount issue, as well: WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170 The issue is that we make an erroneous extra call to scsi_host_put() for that host: So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup a device release method - ata_devres_release() - which intends to release the SCSI hosts: static void ata_devres_release(struct device *gendev, void *res) { ... for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; if (!ap) continue; if (ap->scsi_host) scsi_host_put(ap->scsi_host); } ... } However in the ata_scsi_add_hosts() error path, we also call scsi_host_put() for the SCSI hosts. Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and leave this to ata_devres_release(). Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25ahci: Add Intel Comet Lake H RAID PCI IDKai-Heng Feng1-0/+1
Add the PCI ID to the driver list to support this new device. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12AHCI: Add support for Loongson 7A1000 SATA controllerTiezhu Yang1-0/+7
Loongson 7A1000 SATA controller uses BAR0 as the base address register. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12libata: transport: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-5/+5
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-06Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-blockLinus Torvalds4-2/+33
Pull libata updates from Jens Axboe: - Add a Sandisk CF card to supported pata_pcmcia list (Christian) - Move pata_arasan_cf away from legacy API (Peter) - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar) * tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block: ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel() ata: ahci: Add shutdown to freeze hardware resources of ahci pata_pcmia: add SanDisk High (>8G) CF card to supported list
2020-01-29ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-2/+4
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. The dma_request_chan() is the standard API to request slave channel, clients should be moved away from the legacy API to allow us to retire them. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29ata: ahci: Add shutdown to freeze hardware resources of ahciPrabhakar Kushwaha2-0/+28
device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29pata_pcmia: add SanDisk High (>8G) CF card to supported listChristian Zigotzky1-0/+1
Add new SanDisk High (>8G) CF cards to the pata_pcmcia driver. Signed-off-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+9
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf2dbd Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds3-5/+5
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-22ata/acard_ahci: remove unused variable n_elemAlex Shi1-3/+1
No one care the varible acard_ahci in func acard_ahci_qc_prep. better to remove it. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-22ata: pata_macio: fix comparing pointer to 0Chen Zhou1-1/+1
Fixes coccicheck warning: ./drivers/ata/pata_macio.c:982:31-32: WARNING comparing pointer to 0, suggest !E Compare pointer-typed values to NULL rather than 0. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-17ata: ahci_brcm: BCM7216 reset is self de-assertingFlorian Fainelli1-4/+12
The BCM7216 reset controller line is self-deasserting, unlike other platforms, so make use of reset_control_reset() instead of reset_control_deassert(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-17ata: ahci_brcm: Perform reset after obtaining resourcesFlorian Fainelli1-6/+6
Resources such as clocks, PHYs, regulators are likely to get a probe deferral return code, which could lead to the AHCI controller being reset a few times until it gets successfully probed. Since this is typically the most time consuming operation, move it after the resources have been acquired. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-16ata: brcm: fix reset controller API usageArnd Bergmann1-9/+8
While fixing another issue in this driver I noticed it uses IS_ERR_OR_NULL(), which is almost always a mistake. Change the driver to use the proper devm_reset_control_get_optional() interface instead and remove the checks except for the one that checks for a failure in that function. Fixes: 2b2c47d9e1fe ("ata: ahci_brcm: Allow optional reset controller to be used") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 11:45:15 +0000