summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2021-01-31ata: Avoid comma separated statementsJoe Perches1-8/+13
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-29ata: ahci_brcm: Add back regulators managementFlorian Fainelli1-1/+13
While reworking the resources management and departing from using ahci_platform_enable_resources() which did not allow a proper step separation like we need, we unfortunately lost the ability to control AHCI regulators. This broke some Broadcom STB systems that do expect regulators to be turned on to link up with attached hard drives. Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-30Merge tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull libata fix from Jens Axboe: "Single fix for an old regression with sata_nv" * tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block: ata: sata_nv: Fix retrieving of active qcs
2020-10-28ata: sata_nv: Fix retrieving of active qcsSascha Hauer1-1/+1
ata_qc_complete_multiple() has to be called with the tags physically active, that is the hw tag is at bit 0. ap->qc_active has the same tag at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that up. This is done in the vein of 8385d756e114 ("libata: Fix retrieving of active qcs"). Fixes: 28361c403683 ("libata: add extra internal command") Tested-by: Pali Rohár <pali@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-23ata: pata_ns87415.c: Document support on parisc with superio chipHelge Deller1-2/+1
I tested this driver on my HP PA-RISC C3000 workstation and it does work with the built-in TEAC CD-532E-B CD-ROM drive. So drop the TODO item and adjust the file header. Signed-off-by: Helge Deller <deller@gmx.de>
2020-10-23ata: fix some kernel-doc markupsMauro Carvalho Chehab3-3/+3
Some functions have different names between their prototypes and the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-16ata: sata_rcar: Fix DMA boundary maskGeert Uytterhoeven1-1/+1
Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices"), the R-Car SATA device didn't have DMA parameters. Hence the DMA boundary mask supplied by its driver was silently ignored, as __scsi_init_queue() doesn't check the return value of dma_set_seg_boundary(), and the default value of 0xffffffff was used. Now the device has gained DMA parameters, the driver-supplied value is used, and the following warning is printed on Salvator-XS: DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe] WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300 (the range of start/end values depend on whether IOMMU support is enabled or not) The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so any typical end value, which is odd, will trigger the check. Fix this by increasing the DMA boundary value by 1. This also fixes the following WRITE DMA EXT timeout issue: # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE DMA EXT ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix splitting segments on boundary masks"). Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'") Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices") Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09ata: ahci: mvebu: Make SATA PHY optional for Armada 3720Pali Rohár3-2/+4
Older ATF does not provide SMC call for SATA phy power on functionality and therefore initialization of ahci_mvebu is failing when older version of ATF is using. In this case phy_power_on() function returns -EOPNOTSUPP. This patch adds a new hflag AHCI_HFLAG_IGN_NOTSUPP_POWER_ON which cause that ahci_platform_enable_phys() would ignore -EOPNOTSUPP errors from phy_power_on() call. It fixes initialization of ahci_mvebu on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for SATA phy power. This is regression introduced in commit 8e18c8e58da64 ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property") where SATA phy was defined and therefore ahci_platform_enable_phys() on Espressobin started failing. Fixes: 8e18c8e58da64 ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property") Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02pata_cmd64x: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace /* FALL THRU */ comment with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02ahci: qoriq: enable acpi support in qoriq ahci driverYuantian Tang1-3/+17
This patch enables ACPI support in qoriq ahci driver. Signed-off-by: Udit Kumar <udit.kumar@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02sata, highbank: simplify the return expression of ahci_highbank_suspendLiu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02ahci: Add Intel Rocket Lake PCH-H RAID PCI IDsMika Westerberg1-0/+4
Add Intel Rocket Lake PCH-H RAID PCI IDs to the list of supported controllers. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-04Merge tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-blockLinus Torvalds3-6/+10
Pull libata fixes from Jens Axboe: - improve Sandisks ATA_HORKAGE on NCQ (Tejun) - link printk cleanup (Xu) * tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block: libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks ata: ahci: use ata_link_info() instead of ata_link_printk()
2020-09-02libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to SandisksTejun Heo2-4/+9
All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Karthik Shivaram <karthikgs@fb.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva10-29/+29
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-16ata: ahci: use ata_link_info() instead of ata_link_printk()Xu Wang1-2/+1
Using ata_link_info() instead of ata_link_printk(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-13/+18
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-18libata: Use per port sync for detachKai-Heng Feng1-6/+5
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-04ata/libata: Fix usage of page address by page_address in ↵Ye Bin1-3/+6
ata_scsi_mode_select_xlat function BUG: KASAN: use-after-free in ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 Read of size 1 at addr ffff88803b8cd003 by task syz-executor.6/12621 CPU: 1 PID: 12621 Comm: syz-executor.6 Not tainted 4.19.95 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xac/0xee lib/dump_stack.c:118 print_address_description+0x60/0x223 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report mm/kasan/report.c:409 [inline] kasan_report.cold+0xae/0x2d8 mm/kasan/report.c:393 ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 ata_scsi_translate+0x2da/0x680 drivers/ata/libata-scsi.c:2035 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4360 [inline] ata_scsi_queuecmd+0x2e4/0x790 drivers/ata/libata-scsi.c:4409 scsi_dispatch_cmd+0x2ee/0x6c0 drivers/scsi/scsi_lib.c:1867 scsi_queue_rq+0xfd7/0x1990 drivers/scsi/scsi_lib.c:2170 blk_mq_dispatch_rq_list+0x1e1/0x19a0 block/blk-mq.c:1186 blk_mq_do_dispatch_sched+0x147/0x3d0 block/blk-mq-sched.c:108 blk_mq_sched_dispatch_requests+0x427/0x680 block/blk-mq-sched.c:204 __blk_mq_run_hw_queue+0xbc/0x200 block/blk-mq.c:1308 __blk_mq_delay_run_hw_queue+0x3c0/0x460 block/blk-mq.c:1376 blk_mq_run_hw_queue+0x152/0x310 block/blk-mq.c:1413 blk_mq_sched_insert_request+0x337/0x6c0 block/blk-mq-sched.c:397 blk_execute_rq_nowait+0x124/0x320 block/blk-exec.c:64 blk_execute_rq+0xc5/0x112 block/blk-exec.c:101 sg_scsi_ioctl+0x3b0/0x6a0 block/scsi_ioctl.c:507 sg_ioctl+0xd37/0x23f0 drivers/scsi/sg.c:1106 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:501 [inline] do_vfs_ioctl+0xae6/0x1030 fs/ioctl.c:688 ksys_ioctl+0x76/0xa0 fs/ioctl.c:705 __do_sys_ioctl fs/ioctl.c:712 [inline] __se_sys_ioctl fs/ioctl.c:710 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:710 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb0e9602c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb0e96036d4 RCX: 000000000045c479 RDX: 0000000020000040 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 000000000076bfc0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000046d R14: 00000000004c6e1a R15: 000000000076bfcc Allocated by task 12577: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc mm/kasan/kasan.c:553 [inline] kasan_kmalloc+0xbf/0xe0 mm/kasan/kasan.c:531 __kmalloc+0xf3/0x1e0 mm/slub.c:3749 kmalloc include/linux/slab.h:520 [inline] load_elf_phdrs+0x118/0x1b0 fs/binfmt_elf.c:441 load_elf_binary+0x2de/0x4610 fs/binfmt_elf.c:737 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 12577: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x129/0x170 mm/kasan/kasan.c:521 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kfree+0x8b/0x1a0 mm/slub.c:3904 load_elf_binary+0x1be7/0x4610 fs/binfmt_elf.c:1118 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88803b8ccf00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 259 bytes inside of 512-byte region [ffff88803b8ccf00, ffff88803b8cd100) The buggy address belongs to the page: page:ffffea0000ee3300 count:1 mapcount:0 mapping:ffff88806cc03080 index:0xffff88803b8cc780 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 ffffea0001104080 0000000200000002 ffff88806cc03080 raw: ffff88803b8cc780 00000000800c000b 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88803b8ccf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8ccf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88803b8cd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88803b8cd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8cd100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc You can refer to "https://www.lkml.org/lkml/2019/1/17/474" reproduce this error. The exception code is "bd_len = p[3];", "p" value is ffff88803b8cd000 which belongs to the cache kmalloc-512 of size 512. The "page_address(sg_page(scsi_sglist(scmd)))" maybe from sg_scsi_ioctl function "buffer" which allocated by kzalloc, so "buffer" may not page aligned. This also looks completely buggy on highmem systems and really needs to use a kmap_atomic. --Christoph Hellwig To address above bugs, Paolo Bonzini advise to simpler to just make a char array of size CACHE_MPAGE_LEN+8+8+4-2(or just 64 to make it easy), use sg_copy_to_buffer to copy from the sglist into the buffer, and workthere. Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04sata_rcar: handle pm_runtime_get_sync failure casesNavid Emamdoost1-4/+7
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-19/+11
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-01Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-04-23ata: sata_inic162x fix a spelling issueJohn Oldman1-1/+1
Fixed a warning message spelling issue. Signed-off-by: John Oldman <john.oldman@polehill.co.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22block: move dma_pad handling from blk_rq_map_sg into the callersChristoph Hellwig1-1/+1
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set the dma_pad value in the queue. Move the handling into those callers instead of burdening the common code, and move the ->extra_len field from struct request to struct scsi_cmnd. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22block: move dma drain handling to scsiChristoph Hellwig1-18/+10
Don't burden the common block code with with specifics of the libata DMA draining mechanism. Instead move most of the code to the scsi midlayer. That also means the nr_phys_segments adjustments in the blk-mq fast path can go away entirely, given that SCSI never looks at nr_phys_segments after mapping the request to a scatterlist. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-20ata: libata-core: fix a doc warningMauro Carvalho Chehab1-1/+1
The docs toolchain doesn't recognise this pattern: @link->[hw_]sata_spd_limit As it can't really process it. So, instead, let's mark it with a literal block markup: ``link->[hw_]sata_spd_limit`` in order to get rid of the following warning: ./drivers/ata/libata-core.c:5974: WARNING: Unknown target name: "hw". Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9a21444df75c46095c4b1839d2061d19c9addcff.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-16ahci: Add Intel Comet Lake PCH-U PCI IDKai-Heng Feng1-0/+1
Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers. Set default SATA LPM so the SoC can enter S0ix. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-09ahci: Add Intel Comet Lake PCH RAID PCI IDJian-Hong Pan1-0/+1
Intel Comet Lake should use the default LPM policy for mobile chipsets. So, add the PCI ID to the driver list of supported devices. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07ata: ahci: Add sysfs attribute to show remapped NVMe device countKai-Heng Feng2-4/+25
Add a new sysfs attribute to show how many NVMe devices are remapped. Userspace like distro installer can use this info to ask user to change the BIOS setting. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07ata: ahci-imx: remove redundant assignment to retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07libata: Return correct status in sata_pmp_eh_recover_pm() when ↵Kai-Heng Feng1-0/+1
ATA_DFLAG_DETACH is set During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: make "libata.force" kernel parameter optionalBartlomiej Zolnierkiewicz3-2/+40
Add ATA_FORCE config option (visible only if EXPERT config option is enabled) and make "libata.force" kernel parameter optional. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename w/ CONFIG_ATA_FORCE=y: 31983 572 40 32595 7f53 drivers/ata/libata-core.o w/ CONFIG_ATA_FROCE=n: 28958 316 32 29306 727a drivers/ata/libata-core.o Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.cBartlomiej Zolnierkiewicz2-131/+131
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to libata-sata.c * add static inline for ata_eh_analyze_ncq_error() for CONFIG_SATA_HOST=n case (link->sactive is non-zero only if NCQ commands are actually queued so empty function body is sufficient) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o after: 15446 18 0 15464 3c68 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-eh.cBartlomiej Zolnierkiewicz2-74/+75
Start separating SATA specific code from libata-eh.c: * move sata_async_notification() to libata-sata.c: Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16243 18 0 16261 3f85 drivers/ata/libata-eh.o after: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_sas_*() to libata-sata.cBartlomiej Zolnierkiewicz3-221/+233
* un-inline: - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * un-static: - ata_scsi_sdev_config() - ata_scsi_dev_config() - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * move ata_sas_*() to libata-sata.c: * add static inlines for CONFIG_SATA_HOST=n case for ata_sas_{allocate,free}_tag() Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o after: 18330 23 576 18929 49f1 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-scsi.cBartlomiej Zolnierkiewicz3-300/+301
Start separating SATA specific code from libata-scsi.c: * un-static ata_scsi_find_dev() * move following code to libata-sata.c: - SATA only sysfs device attributes handling - __ata_change_queue_depth() - ata_scsi_change_queue_depth() * cover with CONFIG_SATA_HOST ifdef SATA only sysfs device attributes handling code and ATA_SHT_NCQ() macro in <linux/libata.h> Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20702 105 576 21383 5387 drivers/ata/libata-scsi.o after: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_deb_timing_*() to libata-sata.cBartlomiej Zolnierkiewicz2-8/+8
* move sata_deb_timing_*() to libata-sata.c * add static inline for sata_ehc_deb_timing() for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32158 572 40 32770 8002 drivers/ata/libata-core.o after: 32015 572 40 32627 7f73 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_qc_complete_multiple() to libata-sata.cBartlomiej Zolnierkiewicz2-59/+59
* move ata_qc_complete_multiple() to libata-sata.c Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32559 572 40 33171 8193 drivers/ata/libata-core.o after: 32162 572 40 32774 8006 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_hardreset() to libata-sata.cBartlomiej Zolnierkiewicz3-121/+114
* move sata_link_hardreset() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case * make sata_set_spd_needed() static Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32724 572 40 33336 8238 drivers/ata/libata-core.o after: 32559 572 40 33171 8193 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_{debounce,resume}() to libata-sata.cBartlomiej Zolnierkiewicz2-138/+138
* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move *sata_set_spd*() to libata-sata.cBartlomiej Zolnierkiewicz3-81/+88
* move *sata_set_spd*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32842 572 40 33458 82ae drivers/ata/libata-core.o after: 32812 572 40 33428 8290 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz2-109/+109
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz3-245/+259
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hostsBartlomiej Zolnierkiewicz1-1/+2
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow compiler to optimize out the function for non-SATA configs (for PATA hosts "ap && !ap->ops->set_lpm" condition is always true so it's sufficient for the function to return zero). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 17353 18 0 17371 43db drivers/ata/libata-eh.o after: 16607 18 0 16625 40f1 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hostsBartlomiej Zolnierkiewicz1-0/+2
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow compiler to optimize out the function for non-SATA configs. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36462 572 40 37074 90d2 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz4-181/+216
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: fix CodingStyle issues in PATA timings codeBartlomiej Zolnierkiewicz1-15/+27
* fix the overly long line in ata_timing_quantize() * use standard kernel CodingStyle in ata_timing_merge() * do not use assignment in if condition in ata_timing_compute() * fix non-standard comment style in ata_timing_compute() Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 02:47:22 +0000