summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2013-07-26ahci_imx: depend on CONFIG_MFD_SYSCONTejun Heo1-1/+1
ahci_imx makes use of regmap but the dependency wasn't specified in Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but CONFIG_MFD_SYSCON is not. Add the Kconfig dependency. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-07-24ahci_imx: add ahci sata support on imx platformsRichard Zhu3-0/+246
imx6q contains one Synopsys AHCI SATA controller, But it can't share ahci_platform driver with other controllers because there are some misalignments of the generic AHCI controller - the bits definitions of the HBA registers, the Vendor Specific registers, the AHCI PHY clock and the AHCI signals adjustment window(GPR13 register). - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', should be configured to be '1' - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL should be set to be '1'.(default 0) - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be configured regarding to the frequency of AHB bus clock. - Configurations of the AHCI PHY clock, and the signal parameters of the GPR13 Setup its own ahci sata driver, contained the imx6q specific initialized codes, re-use the generic ahci_platform driver, and keep the generic ahci_platform driver clean as much as possible. tj: patch description reformatted Signed-off-by: Richard Zhu <r65037@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-23ahci: fix Null pointer dereference in achi_host_active()Xiaotian Feng1-1/+8
commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts) introuded a regression, which resulted Null pointer dereference for achi host with dummy ports. For ahci ports, when the port is dummy port, its private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start. changes in v2: use pp to check dummy ports, update comments Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2013-07-22libata: make it clear that sata_inic162x is experimentalTejun Heo2-1/+15
sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Martin Braure de Calignon <braurede@free.fr> Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: risc4all@yahoo.com
2013-07-22libata: replace strict_strtol() with kstrtol()Jingoo Han1-2/+4
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-16ata: Fix DVD not dectected at some platform with Wellsburg PCHYouquan Song1-1/+1
There is a patch b55f84e2d527182e7c611d466cd0bb6ddce201de "ata_piix: Fix DVD not dectected at some Haswell platforms" to fix an issue of DVD not recognized on Haswell Desktop platform with Lynx Point. Recently, it is also found the same issue at some platformas with Wellsburg PCH. So deliver a similar patch to fix it by disables 32bit PIO in IDE mode. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+1
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-07-03Merge branch 'for-3.11' of ↵Linus Torvalds48-184/+374
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ...
2013-07-03Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
2013-07-02Merge branch 'libata/for-3.10-fixes' into libata/for-3.11Tejun Heo17-46/+89
libata/for-3.10-fixes never got submitted during v3.10 cycle. Merge it into for-3.11 so that it can be routed together with other changes scheduled for v3.11. Three trivial conflicts in drivers/ata/sata_rcar.c. All are caused by 1b20f6a9ad ("sata_rcar: add 'base' local variable to some functions") conflicting with logic updates in for-3.10-fixes. The offending commit simply adds local variable @base on functions which dereferences sata_rcar_priv->base multiple times. The resolutions are trivial - applying s/priv->base/base/ in the conflicting logic updates. Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-28Merge branch 'pm-assorted'Rafael J. Wysocki1-1/+1
* pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel
2013-06-24AHCI: use ATA_BUSYSergei Shtylyov2-2/+2
ahci_hardreset() and ahci_p5wdh_hardreset() use bare numbers for the BSY bit of the ATA status register, despite it's #define'd in <linux/ata.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-25libata-acpi: add back ACPI based hotplug functionalityAaron Lu3-1/+40
Commit 30dcf76acc69 "libata: migrate ACPI code over to new bindings" mistakenly dropped the code to register hotplug notificaion handler for ATA port/devices, causing regression for people using ATA bay, as kernel bug #59871 shows. Fix this by adding back the hotplug notification handler registration code. Since this code has to be run once and notification needs to be installed on every ATA port/devices handle no matter if there is actual device attached, we can't do this in binding time for ATA device ACPI handle, as the binding only occurs when a SCSI device is created, i.e. there is device attached. So introduce the ata_acpi_hotplug_init() function to loop scan all ATA ACPI handles and if it is available, install the notificaion handler for it during ATA init time. With the ATA ACPI handle binding to SCSI device tree, it is possible now that when the SCSI hotplug work removes the SCSI device, the ACPI unbind function will find that the corresponding ACPI device has already been deleted by dock driver, causing a scaring message like: [ 128.263966] scsi 4:0:0:0: Oops, 'acpi_handle' corrupt Fix this by waiting for SCSI hotplug task finish in our notificaion handler, so that the removal of ACPI device done in ACPI unbind function triggered by the removal of SCSI device is run earlier when ACPI device is still available. [rjw: Rebased] References: https://bugzilla.kernel.org/show_bug.cgi?id=59871 Reported-bisected-and-tested-by: Dirk Griesbach <spamthis@freenet.de> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: 3.6+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-24libata-zpodd: must use ata_tf_init()Sergei Shtylyov1-3/+4
There are some SATA controllers which have both devices 0 and 1 but this module just zeroes out taskfile and sets then ATA_TFLAG_DEVICE (not sure that's needed) which could lead to a wrong device being selected just before issuing command. Thus we should call ata_tf_init() which sets up the device register value properly, like all other users of ata_exec_internal() do... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-21ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDsSeth Heasley1-0/+1
This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-21ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDsSeth Heasley1-0/+2
This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-18libata: cleanup SAT error translationGwendal Grignou1-20/+17
- Remove duplicate Medium Error Entry. - Fix translations to match SAT2 translation table. - Remove warning messages when translation is not found when decoding error or status register. - Goes through status register decoding when only ABRT bit is set in error register. Tested: When a disk fails, it sets Status = 0x71 [DRDY DF ERR] , Error = 0x4 [ABRT] This patch will make the sense key HARDWARE_ERROR instead. When there is a simple command syntax error: Status = 0x51 [DRDY ERR] , Error = 0x4 [ABRT] The sense key remains ABORTED_COMMAND. tj: Some updates to the description and comments. Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-17ahci: sata: add support for exynos5440 sataGirish K S1-0/+1
This patch adds the compatible string of the exynos5440 sata controller compliant with the ahci 1.3 and sata 3.0 specification. changes in v2: changed the compatible string by adding the actual IP owners name instead of the SoC vendor name. Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-11libata: skip SRST for all SIMG [34]7x port-multipliersTejun Heo1-16/+17
For some reason, a lot of port-multipliers have issues with softreset. SIMG [34]7x series port-multipliers have been quite erratic in this regard. I recall that it was better with some firmware revisions and the current list of quirks worked fine for a while. I think it got worse with later firmwares or maybe my test coverage wasn't good enough. Anyways, HPA is reporting that his 3726 setup suffers SRST failures and then the PMP gets confused and fails to probe the last port. The hope was that we try to stick to the standard as much as possible and soonish the PMPs and their firmwares will improve in quality, so the quirk list was kept to minimum. Well, it seems like that's never gonna happen. Let's set NO_SRST for all [34]7x PMPs so that whatever remaining userbase of the device suffer the least. Maybe we should do the same for 57xx's but unfortunately I don't have any device left to test and I'm not even sure 57xx's have ever been made widely available, so let's leave those alone for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org
2013-06-10MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOCDavid Daney1-1/+1
CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON. This allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC. Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can get the same configuration with CAVIUM_OCTEON_SOC. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: netdev@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net Cc: devel@driverdev.osuosl.org Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/5295/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-09ahci: remove pmp link online check in FBS EHShane Huang1-2/+1
ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2 Reported-by: Yu Liu <liuyu.ac@gmail.com> Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-06sata highbank: add bit-banged SGPIO driver supportMark Langsdorf2-6/+156
Highbank supports SGPIO by bit-banging out the SGPIO signals over three GPIO pins defined in the DTB. Add support for this SGPIO functionality. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-06ahci: make ahci_transmit_led_message into a function pointerMark Langsdorf1-5/+6
Create a new ata_port_operations function pointer called transmit_led_message and give it the default value of ahci_transmit_led_message. This allows AHCI controllers with non-standard LED interfaces to use the existing em_ interface. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-03sata_rcar: fix compilation warning in sata_rcar_thaw()Sergei Shtylyov1-1/+1
When compiling the driver with gcc 4.8, it gives the following warning: drivers/ata/sata_rcar.c: In function `sata_rcar_thaw': drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] Fix the warning by explicit cast of the 'unsigned long' value to 'u32'. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-03sata_highbank: increase retry count but shorten duration for Calxeda controllerMark Langsdorf1-2/+18
Increase the retry count for the hard reset function to 100 but shorten the time out period to 500 ms. See the comment for ahci_highbank_hardreset for the reasons why those vaulues were chosen. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-03PM / Runtime: Rework the "runtime idle" helper routineRafael J. Wysocki1-1/+1
The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-06-03ahci: Add AMD CZ SATA device IDShane Huang1-0/+1
To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-03Merge branch 'for-3.10-fixes' of ↵Linus Torvalds15-26/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "Nothing too interesting. PCI ID additions, some sata_rcar fixes and a fringe bug fix for DMADIR handling which shouldn't affect any device remotely modern." * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_rcar: fix interrupt handling ahci: add an observed PCI ID for Marvell 88se9172 SATA controller sata_rcar: clear STOP bit in bmdma_start() method libata: make ata_exec_internal_sg honor DMADIR ata_piix: add PCI IDs for Intel BayTail libata: update "Maintained by:" tags
2013-06-02ata: use pci_get_drvdata()Jingoo Han30-37/+37
Use the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-02sata_rcar: fix interrupt handlingSergei Shtylyov1-12/+11
The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-05-29ahci: add an observed PCI ID for Marvell 88se9172 SATA controllerGeorge Spelvin1-0/+2
A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-28sata_rcar: add 'base' local variable to some functionsSergei Shtylyov1-45/+57
The 'base' field of 'struct sata_rcar_priv' is used very often throughout the driver, so it seems worth loading it into a local variable if it's used more than once in a function. While at it, put some unitialized variables after intialized ones for aesthetic reasons. :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-28sata_rcar: correct 'sata_rcar_sht'Sergei Shtylyov1-1/+10
Using ATA_BMDMA_SHT() to intialize 'sata_rcar_sht' was suboptimal as the R-Car descriptor table transfer counter is 28 bits wide (bit 1 to bit 28), so that the 'dma_boundary' field of 0xFFFF is just too small, as well as the 'sg_tablesize' field of 128. Use ATA_BASE_SHT() to initialize 'sata_rcar_sht' instead and give proper values to the 'dma_boundary' and 'sg_tablesize' fields explicitly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-28sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg()Sergei Shtylyov1-18/+6
I've modified sata_rcar_bmdma_fill_sg() to take care of splitting long scatter/ gather segments due to the descriptor table transfer counter being only 28 bits wide (bit 1 to bit 28) but that was in vain as even if 'sata_rcar_sht' specified a correct 'dma_boundary' field, the DMA and block layers would have split the S/G segments on the necassary boundaries. Since the driver uses ATA_BMDMA_SHT() to initilaize 'sata_rcar_sht', the boundary is much smaller, only 0xFFFF, so the code I've added is even more useless, and it's better to just remove it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-24libata: do not limit R-Car SATA driver to shmobileSimon Horman1-1/+0
The motivation for this is to allow the driver to be used with the r8a7790 SoC. I believe that rather than adding another SoC to the list of allowed SoCs it is better to simply remove the dependency of the driver on shmobile all together. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-24ata: use platform_{get,set}_drvdata()Jingoo Han8-22/+16
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-22AHCI: Make distinct names for ports in /proc/interruptsAlexander Gordeev3-1/+14
Currently all interrupts assigned to AHCI ports show up in '/proc/interrupts' as 'ahci'. This fix adds port numbers as suffixes and hence makes the descriptions distinct. Reported-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-22sata_rcar: clear STOP bit in bmdma_start() methodSergei Shtylyov1-0/+1
Iff bmdma_setup() has to stop a DMA transfer before starting a new one, then the STOP bit in the ATAPI_CONTROL1 register will remain set (it's only cleared when setting the START bit to 1) and then bmdma_start() method will set both START and STOP bits simultaneously which should abort the transfer being just started. Avoid that by explicitly clearing the STOP bit in bmdma_start() method (in this case it will be ignored on write). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-05-22libata: Add atapi_dmadir force flagVincent Pelletier1-1/+2
Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-22libata: make ata_exec_internal_sg honor DMADIRVincent Pelletier1-0/+6
libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-05-16ata_piix: add PCI IDs for Intel BayTailChew, Chiau Ee1-0/+15
Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-05-14libata: export ata_port port_no attribute via /sysDavid Milburn2-3/+7
While registering host controller track port number based upon number of ports available on the controller, export port_no attribute through /sys. This patch is needed by udev for composing persistent links in /dev/disk/by-path. /sys/devices/pci0000:00/0000:00:1f.2/ata8/ata_port/ata8 total 0 lrwxrwxrwx. 1 root root 0 Mar 6 12:43 device -> ../../../ata8 -r--r--r--. 1 root root 4096 Mar 6 12:43 idle_irq -r--r--r--. 1 root root 4096 Mar 6 12:43 nr_pmp_links -r--r--r--. 1 root root 4096 Mar 6 12:43 port_no drwxr-xr-x. 2 root root 0 Mar 6 12:42 power lrwxrwxrwx. 1 root root 0 Mar 6 12:41 subsystem -> ../../../../../../class/ata_port -rw-r--r--. 1 root root 4096 Mar 6 12:40 uevent 1 Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-14libata: update "Maintained by:" tagsTejun Heo14-14/+14
Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jeff Garzik <jgarzik@pobox.com>
2013-05-12drivers/ata: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-07Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds1-18/+19
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-22/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-30Merge tag 'upstream-linus' of ↵Linus Torvalds9-85/+123
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata update from Jeff Garzik: - More ACPI fixes, cleanups - Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf, sata_rcar - pata_legacy: small bug found in opti chipset code (untested fix, due to ancient h/w) - sata_fsl: RX water mark config knob, some h/w needs it - pata_imx: cleanups, DeviceTree support - SCSI<->ATA translator: properly export translator version, not device firmware version * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_highbank: Rename proc_name to the module name ACPI/libata: Restore libata.noacpi support [libata] acpi: make ata_ap_acpi_handle not block [libata] SCSI: really use SATL version in VPD pata_imx: add devicetree support pata_imx: use void __iomem * for regs pata_imx: cleanup error path pata_imx: Use devm_clk_get sata_rcar: Convert to devm_ioremap_resource() fsl/sata: create a sysfs entry for rx water mark libata-acpi: remove redundent code for power resource handling sata_highbank: make ahci_highbank_pm_ops static pata_octeon_cf: Use resource_size function pata_legacy: bogus clock in opti82c46x_set_piomode() pata_at32: use module_platform_driver_probe()
2013-04-30sata_highbank: Rename proc_name to the module nameRobert Richter1-1/+1
mkinitrd looks at /sys/class/scsi_host/host$hostnum/proc_name to find the module name of a disk driver. Current name is "highbank-ahci" but the module is "sata_highbank". Rename it to match the module name. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Alexander Graf <agraf@suse.de> Cc: <stable@vger.kernel.org> v3.7.. Signed-off-by: Robert Richter <robert.richter@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-30ACPI/libata: Restore libata.noacpi supportLv Zheng1-2/+2
This patch restores libata.noacpi support to libata-acpi.c. There are broken optional control methods for ATA controller devices in the real world. The libata.noacpi has been used for a long time as a workaround to deal with issues caused by the broken ASL codes. 1. The "noacpi" option is introduced by the following commit: commit 11ef697b37e3c85ce1ac21f7711babf1f5b12784 Date: Thu, 28 Sep 2006 11:29:01 -0700 Subject: libata: ACPI and _GTF support 2. The "noacpi" option is renamed to "libata_noacpi" by the following commit: commit d7d0dad62a641c156386288a747c1a2f6bb2e42d Date: Wed, 28 Mar 2007 01:57:37 -0400 Subject: [libata] Disable ACPI by default; fix namespace problems 3. Some of its logics are changed over time - becomes relying on the "acpi_handle" bound to the ATA devices since this commit: commit fafbae87db88a73b166d3bc3294d209207f27056 Date: Tue, 15 May 2007 03:28:16 +0900 Subject: libata-acpi: implement ata_acpi_associate() 4. The option is deleted by the following commit: commit 30dcf76acc695cbd2fa919e294670fe9552e16e7 Date: Mon, 25 Jun 2012 16:13:04 +0800 Subject: libata: migrate ACPI code over to new bindings But the libata.noacpi setup is still left in the kernel without codes to implement it. So the deletion introduces a regression to the Linux. This patch disables ATA_ACPI support at runtime by stopping acpi binding on the ATA devices to fix this regression. This patch is tested by booting a SATA x86-64 kernel or a PATA x86 kernel with or without "libata.noacpi=1" kernel command line argument. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-30[libata] acpi: make ata_ap_acpi_handle not blockAaron Lu1-18/+27
Since commit 30dcf76acc, ata_ap_acpi_handle will always do a namespace walk, which requires acquiring an acpi namespace mutex. This made it impossible to be used when calling path has held a spinlock. For example, it can occur in the following code path for pata_acpi: ata_scsi_queuecmd (ap->lock is acquired) __ata_scsi_queuecmd ata_scsi_translate ata_qc_issue pacpi_qc_issue ata_acpi_stm ata_ap_acpi_handle acpi_get_child acpi_walk_namespace acpi_ut_acquire_mutex (acquire mutex while holding lock) This caused scheduling while atomic bug, as reported in bug #56781. Actually, ata_ap_acpi_handle doesn't have to walk the namespace every time it is called, it can simply return the bound acpi handle on the corresponding SCSI host. The reason previously it is not done this way is, ata_ap_acpi_handle is used in the binding function ata_acpi_bind_host by ata_acpi_gtm when the handle is not bound to the SCSI host yet. Since we already have the ATA port's handle in its binding function, we can simply use it instead of calling ata_ap_acpi_handle there. So introduce a new function __ata_acpi_gtm, where it will receive an acpi handle param in addition to the ATA port which is solely used for debug statement. With this change, we can make ata_ap_acpi_handle simply return the bound handle for SCSI host instead of walking the acpi namespace now. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=56781 Reported-and-tested-by: <kenzopl@o2.pl> Cc: <stable@vger.kernel.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 04:43:11 +0000