summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci_xgene.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-14/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ata: add an extra argument to ahci_platform_get_resources()Kunihiko Hayashi1-1/+1
Add an extra argument to ahci_platform_get_resources(), that is for the bitmap representing the resource to get in this function. Currently there is no resources to be defined, so all the callers set '0' to the argument. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26libahci: Allow drivers to override stop_engineEvan Wang1-2/+2
Marvell armada37xx, armada7k and armada8k share the same AHCI sata controller IP, and currently there is an issue (Errata Ref#226)that the SATA can not be detected via SATA Port-MultiPlayer(PMP). After debugging, the reason is found that the value of Port-x FIS-based Switching Control (PxFBS@0x40) became wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs save the port PxFBS register before PxCMD ST write and restore the port PxFBS register afterwards in ahci_stop_engine(). This commit allows drivers to override ahci_stop_engine behavior for use by the Marvell AHCI driver(and potentially other drivers in the future). Signed-off-by: Evan Wang <xswang@marvell.com> Cc: Ofer Heifetz <oferh@marvell.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-06ata: ahci_xgene: free structure returned by acpi_get_object_info()Michał Kępień1-2/+4
acpi_get_object_info() allocates the returned structure, which the caller has to free when the call succeeds. Free it when appropriate. Fixes: c9802a4be661 ("ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.") Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11ata: ahci_xgene: dereferencing uninitialized pointer in probeDan Carpenter1-2/+2
If the call to acpi_get_object_info() fails then "info" hasn't been initialized. In that situation, we already know that "version" should be XGENE_AHCI_V1 so we don't actually need to dereference "info". Fixes: c9802a4be661 ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11ahci_xgene: Implement the workaround to fix the missing of the edge ↵Suman Tripathi1-1/+46
interrupt for the HOST_IRQ_STAT. Due to H/W errata, the HOST_IRQ_STAT register misses the edge interrupt when clearing the HOST_IRQ_STAT register and hardware reporting the PORT_IRQ_STAT register happens to be at the same clock cycle. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.Suman Tripathi1-1/+39
The flexibility to override the irq handles in the LLD's are already present, so controllers implementing a edge trigger latch can implement their own interrupt handler inside the driver. This patch removes the AHCI_HFLAG_EDGE_IRQ support from libahci and moves edge irq handling to ahci_xgene. tj: Minor update to description. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kenrel.org>
2015-05-18ata: ahci_xgene: potential NULL dereference in probeDan Carpenter1-3/+1
Smatch complains about this potential NULL dereference of "acpi_id". Fixes: c9802a4be661 ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-11ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI ↵Suman Tripathi1-19/+86
SATA Host controller. This patch enables full AHCI feature support for APM X-Gene SoC SATA host controller. The following errata's are removed: 1. 2a0bdff6b95 ("ahci-xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command") 2. 09c32aaa368 ("ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command") 3. 1540035da71 ("ahci_xgene: Implement the xgene_ahci_poll_reg_val to support PMP") 4. a3a84bc7c88 ("ahci_xgene: Implement the workaround to support PMP enumeration and discovery") 5. 1102407bb71 ("ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command") 6. 72f79f9e35b ("ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver") In addition, enable PMP support for APM X-Gene SoC and enable FBS support for second generation APM X-Gene SoC. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19sata: xgene: add ACPI support for APM X-Gene SATA portsFeng Kan1-0/+10
This adds ACPI support for the APM X-Gene SATA ports. When the system boots using ACPI table, the SATA ports are able to configure using the values supplied by the ACPI table rather than the DTS. Signed-off-by: Feng Kan <fkan@apm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-09Merge branch 'for-3.19-fixes' of ↵Tejun Heo1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.20 09c32aaa3683 ("ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.") missed 3.19 release. Fold it into for-3.20. Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode ↵Suman Tripathi1-1/+2
command. This patch addresses the issue with ATA_CMD_SMART pio mode command for enumeration and device detection with ATA devices. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. It is the same issue as in the commit 2a0bdff6b958 ("ahci-xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command"). For example : without this patch it results in READ DMA command failure as shown below : [ 126.700072] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 126.707089] ata2.00: failed command: READ DMA [ 126.711426] ata2.00: cmd c8/00:08:00:55:57/00:00:00:00:00/e1 tag 1 dma 4096 in [ 126.711426] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 126.725956] ata2.00: status: { DRDY } Signed-off-by: Suman Tripathi <stripathi@apm.com> Reported-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-28ata: ahci_platform: fix owner module reference mismatch for scsi hostAkinobu Mita1-2/+9
The owner module reference of the ahci platform's scsi_host is initialized to libahci_platform's one, because these drivers use a scsi_host_template defined in libahci_platform. So these drivers can be unloaded even if the scsi device is being accessed. This fixes it by pushing the scsi_host_template from libahci_platform to all leaf drivers. The scsi_host_template is passed through a new argument of ahci_platform_init_host(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: linux-ide@vger.kernel.org Cc: linux-scsi@vger.kernel.org
2015-01-06ahci_xgene: Implement the workaround to support PMP enumeration and discovery.Suman Tripathi1-5/+128
Due to H/W errata, the controller is unable to save the PMP field fetched from command header before sending the H2D FIS. When the device returns the PMP port field in the D2H FIS, there is a mismatch and results in command completion failure. The workaround is to write the pmp value to PxFBS.DEV field before issuing any command to PMP. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-06ahci_xgene: Implement the xgene_ahci_poll_reg_val to support PMP.Suman Tripathi1-2/+54
This patch implements the function xgene_ahci_poll_reg_val to poll PxCI for multiple IDENTIFY DEVICE commands to finish before restarting the DMA engine. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-05ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode ↵Suman Tripathi1-5/+7
command. This patch addresses the issue with ATA_CMD_PACKET pio mode command for enumeration and device detection with ATAPI devices. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-05ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller ↵Suman Tripathi1-1/+1
driver. This patch fixes the big endian mode issue with function xgene_ahci_read_id. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-10-20ata: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-10Merge branch 'for-3.18' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata update from Tejun Heo: "AHCI is getting per-port irq handling and locks for better scalability. The gain is not huge but measureable with multiple high iops devices connected to the same host; however, the value of threaded IRQ handling seems negligible for AHCI and it likely will revert to non-threaded handling soon. Another noteworthy change is George Spelvin's "libata: Un-break ATA blacklist". During 3.17 devel cycle, the libata blacklist glob matching got generalized and rewritten; unfortunately, the patch forgot to swap arguments to match the new match function and ended up breaking blacklist matching completely. It got noticed only a couple days ago so it couldn't make for-3.17-fixes either. :( Other than the above two, nothing too interesting - the usual cleanup churns and device-specific changes" * 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller libata: Un-break ATA blacklist AHCI: Do not acquire ata_host::lock from single IRQ handler AHCI: Optimize single IRQ interrupt processing AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode AHCI: Make few function names more descriptive AHCI: Move host activation code into ahci_host_activate() AHCI: Move ahci_host_activate() function to libahci.c AHCI: Pass SCSI host template as arg to ahci_host_activate() ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro AHCI: Cleanup checking of multiple MSIs/SLM modes libata-sff: Fix controllers with no ctl port ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver. libata: change ata_<foo>_printk routines to return void ata: qcom: Add device tree bindings information ahci-platform: Bump max number of clocks to 5 ahci: ahci_p5wdh_workaround - constify DMI table libahci_platform: Staticize ahci_platform_<en/dis>able_phys() pata_platform: Remove useless irq_flags field pata_of_platform: Remove "electra-ide" quirk ...
2014-09-23ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI ↵Suman Tripathi1-2/+8
SATA Host Controller driver. This patch fixes the error print invalid resource for the APM X-Gene SoC AHCI SATA Host Controller driver. This print was due to the fact that the controller 3 don't have a mux resource. This didn't result in any errors but the print seems like meaningless. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-06ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI ↵Suman Tripathi1-14/+34
SATA host controller driver. Due to HW errata the APM X-Gene AHCI SATA host controller reports link down even if the device presence is detected. This issue is due to speed negotiation failure. This patch implements the algorithm to retry the COMRESET if PxSTAT register reports device presence detected but PHY communication not established. The maximum retry attempts are 3. This patch also fixes the code to match the algorithm for the printing a warning message if the disparity error still exists after link up. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-06ahci_xgene: Skip the PHY and clock initialization if already configured by ↵Suman Tripathi1-1/+14
the firmware. This patch implements the feature to skip the PHY and clock initialization if it is already configured by the firmware. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host ↵Suman Tripathi1-2/+2
Controller driver. This patch removes the NCQ support from the APM X-Gene SoC AHCI Host Controller driver as it doesn't support it. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-07-30ata: libahci_platform: move port_map parameters into the AHCI structureAntoine Ténart1-4/+2
This patch moves force_port_map and mask_port_map into the ahci_host_priv structure. This allows to modify them into the AHCI framework. This is needed by the new dt bindings representing ports as the port_map mask is computed automatically. Parameters modifying force_port_map, mask_port_map and flags have been removed from the ahci_platform_init_host() function, and inputs in the ahci_host_priv structure are now directly filed. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-30Merge branch 'for-3.16-fixes' of ↵Tejun Heo1-13/+47
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.17 The scheduled ahci platform patches depend on change in for-3.16-fixes. Pull it into for-3.17. Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-29ahci_xgene: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA ↵Suman Tripathi1-3/+3
Host controller driver. APM X-Gene SoC AHCI SATA Host controller driver requires some correction of Phy Control OOB timing for the COMINIT/COMWAKE parameters to correctly interoperate with different kinds of disks. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-29ahci_xgene: Fix the watermark threshold for the APM X-Gene SATA host ↵Suman Tripathi1-0/+7
controller driver. As per SATA IO specification, when Host sends HOLD, the device takes about 20DW latency to reply to HOLDA. In some case, device doesn't response to HOLDA over 20DW and causes FIFO goes into over flow condition. Due to this condition, device enumerations fails with those devices. This patch adjust the watermark FIFO by increasing the FIFO depth from 0x16(default) to 0x30 to address this issue. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO ↵Suman Tripathi1-13/+47
mode command. This patch fixes the dma state machine lockup due to the processing of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. This patch also removes the dma restart workaround from the read_id function as the read_id function is only called by libata layer for ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER and udev, the framework will enumerate using SCSI commands and it will not call read_id function. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-17ahci/xgene: Remove logic to set 64-bit DMA maskSuravee Suthikulpanit1-10/+0
Instead of doing the check here, this should be handled in the common AHCI platform code. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Loc Ho <lho@apm.com> Cc: Tuan Phan <tphan@apm.com> Cc: Suman Triphati <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-14libahci_platform: add host_flags parameter in ahci_platform_init_host()Kefeng Wang1-2/+5
Add a dynamic host_flags argument to make ahci_platform_init_host more flexible, then remove the AHCI_HFLAGS(...) argument from some driver's ata_port_info, and pass that in as the new argument. Cc: Hans de Geode <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-18ata: Fix compiler warning with APM X-Gene host controller driverLoc Ho1-1/+1
This patch fixes an compiler warning with APM X-Gene host controller driver when compiled with DEBUG enabled. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17ata: Add APM X-Gene SoC AHCI SATA host controller driverLoc Ho1-0/+486
This patch adds support for the APM X-Gene SoC AHCI SATA host controller driver. It requires the corresponding APM X-Gene SoC PHY driver. This initial version only supports Gen3 speed. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>