summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-13Merge branch 'for-4.10' of ↵Linus Torvalds1-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Adam added opt-in ATA command priority support. - There are machines which hide multiple nvme devices behind an ahci BAR. Dan Williams proposed a solution to force-switch the mode but deemed too hackishd. People are gonna discuss the proper way to handle the situation in nvme standard meetings. For now, detect and warn about the situation. - Low level driver specific changes. Christoph Hellwig pipes in about the hidden nvme warning: "I wish that was the case. We've pretty much agreed that we'll want to implement it as a virtual PCIe root bridge, similar to Intels other 'innovation' VMD that we work around that way. But Intel management has apparently decided that they don't want to spend more cycles on this now that Lenovo has an optional BIOS that doesn't force this broken mode anymore, and no one outside of Intel has enough information to implement something like this. So for now I guess this warning is it, until Intel reconsideres and spends resources on fixing up the damage their Chipset people caused" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: warn about remapped NVMe devices ahci-remap.h: add ahci remapping definitions nvme: move NVMe class code to pci_ids.h pata: imx: support controller modes up to PIO4 pata: imx: add support of setting timings for PIO modes pata: imx: set controller PIO mode with .set_piomode callback pata: imx: sort headers out ata: set ncq_prio_enabled iff device has support ata: ATA Command Priority Disabled By Default ata: Enabling ATA Command Priorities block: Add iocontext priority to request ahci: qoriq: added ls1046a platform support
2016-12-05ahci: warn about remapped NVMe devicesChristoph Hellwig1-0/+39
Some Intel ahci implementations have a completely broken remapping mode where they hide one or more NVMe devices behind the bar of an AHCI device. Intel refuses to let the OS reprogram the BIOS to switch out of this mode at runtime, and so far we're not come up with another good way to undo the mess that the Chipset people created. So for now the only thing we can do is to alert users about this situation and switch to the faster and much saner so called "AHCI" mode insted of the RAID mode in the BIOS so that the BIOS does not hide the NVMe devices from us. The sitation is even worse as at least one vendor (thanks a lot Lenovo..) has started hardcoding their BIOS into the "RAID" mode even for laptops that don't use AHCI _at all_ and just have a single NVMe device. For now there is an unspported Linux-only BIOS that undoes this braindamage, but we'll have to see if things are getting better or worse from here. Based on an earlier patch from Dan Williams <dan.j.williams@intel.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-11-21ahci: always fall back to single-MSI modeChristoph Hellwig1-7/+0
Don't try to guess what the errors from pci_irq_alloc_vectors mean, as that's too fragile. Instead always try allocating a single vector when multi-MSI mode fails. This makes various intel Desktop and Laptop CPUs use MSI again. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Michael Marley <michael@michaelmarley.com> Tested-by: Michael Marley <michael@michaelmarley.com> Fixes: 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors") Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-25ahci: fix the single MSI-X case in ahci_init_oneChristoph Hellwig1-1/+1
We need to make sure hpriv->irq is set properly if we don't use per-port vectors, so switch from blindly assigning pdev->irq to using pci_irq_vector, which handles all interrupt types correctly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Robert Richter <robert.richter@cavium.com> Tested-by: Robert Richter <robert.richter@cavium.com> Tested-by: David Daney <ddaney.cavm@gmail.com> Fixes: 0b9e2988ab22 ("ahci: use pci_alloc_irq_vectors") Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-20ahci: fix nvec checkChristoph Hellwig1-7/+7
commit 17a51f12 ("ahci: only try to use multi-MSI mode if there is more than 1 port") lead to a case where nvec isn't initialized before it's used. Fix this by moving the check into the n_ports conditional. Reported-and-reviewed-by Colin Ian King <colin.king@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-19ahci: only try to use multi-MSI mode if there is more than 1 portChristoph Hellwig1-14/+17
We should only try to allocate multiple MSI or MSI-X vectors if the device actually has multiple ports. Otherwise pci_alloc_irq_vectors will return a single vector due to n_ports = 1, in which case we shouldn't set the AHCI_HFLAG_MULTI_MSI flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 0b9e2988 ("ahci: use pci_alloc_irq_vectors") Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Tested-by: Emmanuel Benisty <benisty.e@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-06ahci: use pci_alloc_irq_vectorsChristoph Hellwig1-117/+32
Use the new pci_alloc_irq_vectors API to allocate MSI-X and MSI vectors. The big advantage over the old code is that we can use the same API for MSI and MSI-X, and that we don't need to store the MSI-X vector mapping in driver-private data structures. This first conversion keeps the probe order as-is: MSI-X multi vector, MSI multi vector, MSI single vector, MSI-X single vector and last a single least legacy interrupt line. There is one small change of behavior: we now check the "MSI Revert to Single Message" flag for MSI-X in addition to MSI. Because the API to find the Linux IRQ number for a MSI/MSI-X vector is PCI specific, but libahaci is bus-agnostic I had to a get_irq_vector function pointer to struct ahci_host_priv. The alternative would be to move the multi-vector case of ahci_host_activate to ahci.c and just call ata_host_activate directly from the others users of ahci_host_activate. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-27ata: Use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-1/+1
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDsScott Lawson1-4/+0
These PCI device IDs have been removed from the Intel Lewisburg design specification. They are no longer needed. Signed-off-by: Scott Lawson <scott.lawson@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11Merge branch 'for-4.5-fixes' into for-4.6Tejun Heo1-0/+49
2016-02-29ahci: Workaround for ThunderX Errata#22536Tirumalesh Chalamarla1-0/+43
Due to Errata in ThunderX, HOST_IRQ_STAT should be cleared before leaving the interrupt handler. The patch attempts to satisfy the need. Changes from V2: - removed newfile - code is now under CONFIG_ARM64 Changes from V1: - Rebased on top of libata/for-4.6 - Moved ThunderX intr handler to new file tj: Minor adjustments to comments. Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19ahci: Add runtime PM support for the host controllerMika Westerberg1-12/+61
This patch adds runtime PM support for the AHCI host controller driver so that the host controller is powered down when all SATA ports are runtime suspended. Powering down the AHCI host controller can reduce power consumption and possibly allow the CPU to enter lower power idle states (S0ix) during runtime. Runtime PM is blocked by default and needs to be unblocked from userspace as needed (via power/* sysfs nodes). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19ahci: Convert driver to use modern PM hooksMika Westerberg1-27/+24
In order to add support for runtime PM to the ahci driver we first need to convert the driver to use modern non-legacy system suspend hooks. There should be no functional changes. tj: Updated .driver.pm init for older compilers as suggested by Andy and Chrsitoph. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-18Adding Intel Lewisburg device IDs for SATAAlexandra Yates1-0/+6
This patch complements the list of device IDs previously added for lewisburg sata. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2016-02-10ahci: Intel DNV device IDs SATAAlexandra Yates1-0/+20
Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-11-16ahci: per-port msix supportDan Williams1-22/+45
Some AHCI controllers support per-port MSI-X vectors. At the same time the Linux AHCI driver needs to support one-off architectures that implement a single MSI-X vector for all ports. The heuristic for enabling AHCI ports becomes, in order of preference: 1/ per-port multi-MSI-X 2/ per-port multi-MSI 3/ single MSI 4/ single MSI-X 5/ legacy INTX This all depends on AHCI implementations with potentially broken MSI-X requesting less vectors than the number of ports. If this assumption is violated we will need to start explicitly white-listing AHCI-MSIX implementations. Reported-by: Ricardo Neri <ricardo.neri@intel.com> [ricardo: fix struct msix_entry handling] Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16ahci: Order SATA device IDs for codename LewisburgAlexandra Yates1-10/+10
This change was to preserve the ascending order of device IDs. There was an exception with the first two Lewisburg device IDs to keep all device IDs of the same kind grouped by code name. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16ahci: Add Device ID for Intel Sunrise Point PCHCharles_Rose@Dell.com1-0/+2
This patch adds missing AHCI RAID SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by: Nanda Kishore Chinna <nanda_kishore_chinna@dell.com> Signed-off-by: Charles Rose <charles_rose@dell.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-03ahci: add new Intel device IDsAlexandra Yates1-0/+10
Adding Intel codename Lewisburg platform device IDs for SATA. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31ahci: Add Marvell 88se91a2 device idJohannes Thumshirn1-0/+2
Add device id for Marvell 88se91a2 Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-24PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCIZhang Rui1-12/+1
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at function 1 doesn't work if it is powered on before the SATA controller at function 0. The result is that PATA doesn't work after resume, and we print messages like this: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 irq 17: nobody cared (try booting with the "irqpoll" option) Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep: Asynchronous threads for resume_noirq"). Prior to that, we powered on the functions in order, so this problem shouldn't happen. e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361") solved the problem for JMicron 361 and 363 devices. With async suspend disabled, we always power on function 0 before function 1. Barto then reported the same problem with a JMicron 368 (see comment #57 in the bugzilla). Rather than extending the blacklist piecemeal, disable async suspend for all JMicron multi-function SATA/PATA/AHCI devices. This quirk could stay in the ahci and pata_jmicron drivers, but it's likely the problem will occur even if pata_jmicron isn't loaded until after the suspend/resume. Making it a PCI quirk ensures that we'll preserve the power-on order even if the drivers aren't loaded. [bhelgaas: changelog, limit to multi-function, limit to IDE/ATA] Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-and-tested-by: Barto <mister.freeman@laposte.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2015-06-25Merge branch 'for-4.2' of ↵Linus Torvalds1-15/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - a number of libata core changes to better support NCQ TRIM. - ahci now supports MSI-X in single IRQ mode to support a new controller which doesn't implement MSI or INTX. - ahci now supports edge-triggered IRQ mode to support a new controller which for some odd reason did edge-triggered IRQ. - the usual controller support additions and changes. * 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits) libata: Do not blacklist Micron M500DC ata: ahci_mvebu: add suspend/resume support ahci, msix: Fix build error for !PCI_MSI ahci: Add support for Cavium's ThunderX host controller ahci: Add generic MSI-X support for single interrupts to SATA PCI driver libata: finally use __initconst in ata_parse_force_one() drivers: ata: add support for Ceva sata host controller devicetree:bindings: add devicetree bindings for ceva ahci ahci: added support for Freescale AHCI sata ahci: Store irq number in struct ahci_host_priv ahci: Move interrupt enablement code to a separate function Doc: libata: Fix spelling typo found in libata.xml ata:sata_nv - Change 1 to true for bool type variable. ata: add Broadcom AHCI SATA3 driver for STB chips Documentation: devicetree: add Broadcom SATA binding libata: Fix regression when the NCQ Send and Receive log page is absent ata: hpt366: fix constant cast warning ata: ahci_xgene: potential NULL dereference in probe ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller. libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch. ...
2015-06-17ahci, msix: Fix build error for !PCI_MSIRobert Richter1-20/+1
It turned out the irq vector of the msix can be obtained from struct msix_entry. This makes the lookup function for msi_desc obsolete. This fixes a build error if PCI_MSI is unset: drivers/ata/ahci.c: In function ‘msix_get_desc’: drivers/ata/ahci.c:1210:2: error: ‘struct pci_dev’ has no member named ‘msi_list’ Catched by Fengguang's build bot. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-16ahci: Add support for Cavium's ThunderX host controllerRobert Richter1-1/+4
This patch adds support for Cavium's ThunderX host controller. The controller resides on the SoC and is a AHCI compatible SATA controller with one port, compliant with Serial ATA 3.1 and AHCI Revision 1.31. There can exists multiple SATA controllers on the SoC. The controller depends on MSI-X support since the PCI ECAM controller on the SoC does not implement MSI nor lagacy intx interrupt support. Thus, during device initialization, if MSI fails MSI-X will be used to enable the device's interrupts. The controller uses non-standard BAR0 for its register range. The already existing device lookup (vendor and device id) that is already implemented for other host controllers is used to change the PCI BAR. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-16ahci: Add generic MSI-X support for single interrupts to SATA PCI driverRobert Richter1-0/+72
This patch adds generic MSI-X support for single interrupts to the SATA PCI driver. MSI-X support is needed for host controller that only have MSI-X support implemented, but no MSI or intx. This patch only adds support for single interrupts, multiple per-port MSI-X interrupts are not yet implemented. The new implementation still initializes MSIs first. Only if that fails, the code tries to enable MSI-X. If that fails too, setup is continued with intx interrupts. To not break other chips by this generic code change, there are the following precautions: * Interrupt ranges are not enabled at all. * Only single interrupt mode is enabled for msix cap devices. Thus, only one interrupt will be setup. * During the discussion with Tejun we agreed to change the init sequence from msix-msi-intx to msi-msix-intx. Thus, if a device offers msi and init does not fail, the msix init code will not be executed. This is equivalent to current code. With this, the code only setups single mode msix as a last resort if msi fails. No interrupt range is enabled at all. Only one interrupt will be enabled. tj: comment edits. Changes of the patch series: v5: * updated patch subject that the patch only implements single IRQ * moved Cavium specific code to a separate patch * detect Cavium ThunderX device with PCI_CLASS_STORAGE_SATA_AHCI instead of vendor/dev id * added more comments to the code * enable single msix support for all kind of devices (removing strict check) * rebased onto update libata/for-4.2 with patch 1, 2 applied v4: * removed implementation of ahci_init_intx() * improved patch descriptions * rebased onto libata/for-4.2 v3: * store irq number in struct ahci_host_priv * change initialization order from msix-msi-intx to msi-msix-intx * improve comments in ahci_init_msix() * improve error message in ahci_init_msix() * do not enable MSI-X if MSI is actively disabled for the device v2: * determine irq vector from pci_dev->msi_list Based on a patch from Sunil Goutham <sgoutham@cavium.com>. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-03ahci: Store irq number in struct ahci_host_privRobert Richter1-5/+10
Currently, ahci supports only msi and intx. To also support msix the handling of the irq number need to be changed. The irq number for msix devices is taken from msi_list instead of pci_dev. Thus, the irq number of a device needs to be stored in struct ahci_host_priv now. This allows the host controller to be activated in a generic way. This change is only intended for ahci drivers. For that reason the irq number is stored in struct ahci_host_priv used only by ahci drivers. Thus, the ABI changes only for ahci_host_activate(), but existing ata drivers (about 50) are unaffected and keep unchanged. All users of ahci_host_activate() have been updated. While touching drivers/ata/libahci.c, doing a small code cleanup in ahci_port_start(). Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-03ahci: Move interrupt enablement code to a separate functionRobert Richter1-9/+22
This patch refactors ahci_init_interrupts() and moves msi code to a separate function. Need the split since we add msix initialization in a later patch. The initialization for msix will be done after msi but before intx. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-10ahci: avoton port-disable reset-quirkDan Williams1-8/+95
Avoton AHCI occasionally sees drive probe timeouts at driver load time. When this happens SCR_STATUS indicates device detected, but no D2H FIS reception. Reset the internal link state machines by bouncing port-enable in the PCS register when this occurs. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-08ata: remove deprecated use of pci apiQuentin Lambert1-5/+5
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-13ahci: Remove Device ID for Intel Sunrise Point PCHJames Ralston1-1/+0
This patch removes a duplicate AHCI-mode SATA Device ID for the Intel Sunrise Point PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-12-04ahci: disable MSI on SAMSUNG 0xa800 SSDTejun Heo1-0/+1
Just like 0x1600 which got blacklisted by 66a7cbc303f4 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171 Cc: stable@vger.kernel.org
2014-12-02AHCI: Add DeviceIDs for Sunrise Point-LP SATA controllerDevin Ryles1-0/+3
This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by: Devin Ryles <devin.ryles@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-11-04ahci: fix AHCI parameters not taken into accountAntoine Tenart1-6/+3
Changes into the AHCI subsystem have introduced a bug by not taking into account the force_port_map and mask_port_map parameters when using the ahci_pci_save_initial_config function. This commit fixes it by setting the internal parameters of the ahci_port_priv structure. Fixes: 725c7b570fda Reported-and-tested-by: Zlatko Calusic <zcalusic@bitsync.net> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
2014-10-27ahci: Add Device IDs for Intel Sunrise Point PCHJames Ralston1-0/+5
This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-10-27ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooksTejun Heo1-3/+11
Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so 67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") disabled NCQ on them. It turns out that NCQ is fine as long as MSI is not used, so let's turn off MSI and leave NCQ on. Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=60731 Tested-by: <dorin@i51.org> Tested-by: Imre Kaloz <kaloz@openwrt.org> Cc: stable@vger.kernel.org Fixes: 67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
2014-10-10Merge branch 'for-3.18' of ↵Linus Torvalds1-75/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata update from Tejun Heo: "AHCI is getting per-port irq handling and locks for better scalability. The gain is not huge but measureable with multiple high iops devices connected to the same host; however, the value of threaded IRQ handling seems negligible for AHCI and it likely will revert to non-threaded handling soon. Another noteworthy change is George Spelvin's "libata: Un-break ATA blacklist". During 3.17 devel cycle, the libata blacklist glob matching got generalized and rewritten; unfortunately, the patch forgot to swap arguments to match the new match function and ended up breaking blacklist matching completely. It got noticed only a couple days ago so it couldn't make for-3.17-fixes either. :( Other than the above two, nothing too interesting - the usual cleanup churns and device-specific changes" * 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller libata: Un-break ATA blacklist AHCI: Do not acquire ata_host::lock from single IRQ handler AHCI: Optimize single IRQ interrupt processing AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode AHCI: Make few function names more descriptive AHCI: Move host activation code into ahci_host_activate() AHCI: Move ahci_host_activate() function to libahci.c AHCI: Pass SCSI host template as arg to ahci_host_activate() ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro AHCI: Cleanup checking of multiple MSIs/SLM modes libata-sff: Fix controllers with no ctl port ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver. libata: change ata_<foo>_printk routines to return void ata: qcom: Add device tree bindings information ahci-platform: Bump max number of clocks to 5 ahci: ahci_p5wdh_workaround - constify DMI table libahci_platform: Staticize ahci_platform_<en/dis>able_phys() pata_platform: Remove useless irq_flags field pata_of_platform: Remove "electra-ide" quirk ...
2014-10-06AHCI: Move host activation code into ahci_host_activate()Alexander Gordeev1-5/+1
Currently host activation done by calling either function ahci_host_activate() or ata_host_activate(). Consolidate the code by only calling ahci_host_activate() for all AHCI devices. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org
2014-10-06AHCI: Move ahci_host_activate() function to libahci.cAlexander Gordeev1-60/+0
This update is a prerequisite for consolidation of AHCI host activation code within ahci_host_activate() function. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org
2014-10-06AHCI: Pass SCSI host template as arg to ahci_host_activate()Alexander Gordeev1-5/+5
This update is a prerequisite for consolidation of AHCI host activation code within ahci_host_activate() function. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org
2014-09-28AHCI: Cleanup checking of multiple MSIs/SLM modesAlexander Gordeev1-11/+7
Sharing Last Message (SLM) mode is currently checked in two functions: ahci_host_activate() and ahci_init_interrupts(). This update consolidates SLM mode check with activation of multiple MSIs mode. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org
2014-09-06ahci: add pcid for Marvel 0x9182 controllerMurali Karicheri1-0/+2
Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: stable@vger.kernel.org
2014-09-01ata: Disabling the async PM for JMicron chip 363/361Chuansheng Liu1-0/+12
After enabled the PM feature that supporting async noirq(76569faa62 (PM / sleep: Asynchronous threads for resume_noirq)), Jay hit the system resuming issue, that one of the JMicron controller can not be powered up. His device tree is like below: +-1c.4-[02]--+-00.0 JMicron Technology Corp. JMB363 SATA/IDE Controller | \-00.1 JMicron Technology Corp. JMB363 SATA/IDE Controller After investigation, we found the the Micron chip 363 included one SATA controller(0000:02:00.0) and one PATA controller(0000:02:00.1), these two controllers do not have parent-children relationship, but the PATA controller only can be powered on after the SATA controller has finished the powering on. If we enabled the async noirq(), then the below error is hit during noirq phase: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 Here for JMicron chip 363/361, we need forcedly to disable the async method. Bug detail: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-by: Jay <MyMailClone@t-online.de> Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-31ahci: ahci_p5wdh_workaround - constify DMI tableMathias Krause1-1/+1
The DMI table does not need to be written to, make it r/o. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-28ahci: Add Device IDs for Intel 9 Series PCHJames Ralston1-0/+8
This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-07-30ata: libahci_platform: move port_map parameters into the AHCI structureAntoine Ténart1-2/+1
This patch moves force_port_map and mask_port_map into the ahci_host_priv structure. This allows to modify them into the AHCI framework. This is needed by the new dt bindings representing ports as the port_map mask is computed automatically. Parameters modifying force_port_map, mask_port_map and flags have been removed from the ahci_platform_init_host() function, and inputs in the ahci_host_priv structure are now directly filed. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-18ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)Romain Degez1-0/+1
Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by: Romain Degez <romain.degez@gmail.com> Tested-by: Romain Degez <romain.degez@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-06-09Merge branch 'for-3.16' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting - another ahci platform driver variant, additional controller support, minor fixes and cleanups" * 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: Add Device ID for HighPoint RocketRaid 642L ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback ahci: add PCI ID for Marvell 88SE91A0 SATA Controller sata_fsl: remove check for CONFIG_MPC8315_DS ahci: add support for Hisilicon sata libahci_platform: add host_flags parameter in ahci_platform_init_host() ata: ahci: append new hflag AHCI_HFLAG_NO_FBS ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces Documentation: dt-bindings: reformat and order list of ahci-platform compatibles libata-sff: remove dead code ata: SATL compliance for Inquiry Product Revision pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-06-03ahci: Add Device ID for HighPoint RocketRaid 642LJérôme Carretero1-0/+2
This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-05-27ahci: add PCI ID for Marvell 88SE91A0 SATA ControllerAndreas Schrägle1-0/+2
Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by: Andreas Schrägle <ajs124.ajs124@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-04-24ahci: disable DEVSLP for Intel ValleyviewJacob Pan1-0/+15
On Intel Valleyview SoC, SATA device sleep is not reliable. When DEVSLP is attempted on certain SSDs, port_devslp write would fail and result in malfunction of AHCI controller. AHCI controller may be not shown in PCI enumeration after reset. Complete power source removal may be required to recover from this failure. So we blacklist this device and override host device reported capabilities such that device LPM will only attempt slumber but not DEVSLP. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 22:42:10 +0000