| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Binder uses internal fs interfaces to allocate and install fds:
__alloc_fd
__fd_install
__close_fd
get_files_struct
put_files_struct
These were used to support the passing of fds between processes
as part of a transaction. The actual allocation and installation
of the fds in the target process was handled by the sending
process so the standard functions, alloc_fd() and fd_install()
which assume task==current couldn't be used.
This patch refactors this mechanism so that the fds are
allocated and installed by the target process allowing the
standard functions to be used.
The sender now creates a list of fd fixups that contains the
struct *file and the address to fixup with the new fd once
it is allocated. This list is processed by the target process
when the transaction is dequeued.
A new error case is introduced by this change. If an async
transaction with file descriptors cannot allocate new
fds in the target (probably due to out of file descriptors),
the transaction is discarded with a log message. In the old
implementation this would have been detected in the sender
context and failed prior to sending.
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As of commit 7124330dabe5b3cb ("m68k/uaccess: Revive 64-bit
get_user()"), the 64-bit Android binder interface builds fine on m68k.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New devices launching with Android P need to use the 64-bit
binder interface, even on 32-bit SoCs [0].
This change removes the Kconfig option to select the 32-bit
binder interface. We don't think this will affect existing
userspace for the following reasons:
1) The latest Android common tree is 4.14, so we don't
believe any Android devices are on kernels >4.14.
2) Android devices launch on an LTS release and stick with
it, so we wouldn't expect devices running on <= 4.14 now
to upgrade to 4.17 or later. But even if they did, they'd
rebuild the world (kernel + userspace) anyway.
3) Other userspaces like 'anbox' are already using the
64-bit interface.
Note that this change doesn't remove the 32-bit UAPI
itself; the reason for that is that Android userspace
always uses the latest UAPI headers from upstream, and
userspace retains 32-bit support for devices that are
upgrading. This will be removed as well in 2-3 years,
at which point we can remove the code from the UAPI
as well.
Finally, this change introduces build errors on archs where
64-bit get_user/put_user is not supported, so make binder
unavailable on m68k (which wouldn't want it anyway).
[0]: https://android-review.googlesource.com/c/platform/build/+/595193
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_alloc_selftest tests that alloc_new_buf handles page allocation and
deallocation properly when allocate and free buffers. The test allocates 5
buffers of various sizes to cover all possible page alignment cases, and
frees the buffers using a list of exhaustive freeing order.
Test: boot the device with ANDROID_BINDER_IPC_SELFTEST config option
enabled. Allocator selftest passes.
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit d0bdff0db809 ("staging: Fix build issues with new
binder API"), because commit e38361d032f1 ("ARM: 8091/2: add get_user()
support for 8 byte types") has added the 64bit __get_user_asm_*
implementation.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These will be required going forward.
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As AOSP master is now starting to require a hwbinder device, add it to
the the default Kconfig. Having the hwbinder device when not needed
shouldn't hurt anything either.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new module parameter 'devices', that can be
used to specify the names of the binder device
nodes we want to populate in /dev.
Each device node has its own context manager, and
is therefore logically separated from all the other
device nodes.
The config option CONFIG_ANDROID_BINDER_DEVICES can
be used to set the default value of the parameter.
This approach was favored over using IPC namespaces,
mostly because we require a single process to be a
part of multiple binder contexts, which seemed harder
to achieve with namespaces.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Martijn Coenen <maco@google.com>
[jstultz: minor checkpatch warning fix]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Android binder code has been "stable" for many years now. No matter
what comes in the future, we are going to have to support this API, so
might as well move it to the "real" part of the kernel as there's no
real work that needs to be done to the existing code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
