| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ACPICA commit 2efd616e5b1c960f407763e6782f7dc259ea55df
Attempting to improve error messages to clarify that errors
are bubbled up from the original error, possibly across nested
methods.
Link: https://github.com/acpica/acpica/commit/2efd616e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 349dd29335d6928f883bc95c614a0edd033141bb
- Fault on Field Units
- Some restructuring
- General cleanup of dbtest module
Link: https://github.com/acpica/acpica/commit/349dd293
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 387c850c5d49d09d7c2e70b2711e584ad83956a1
Nothing can be done with such a region. Just emit a warning so as
not to abort a table load or running method.
Link: https://github.com/acpica/acpica/commit/387c850c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 47f5607c204719d9239a12b889df725225098c8f
Module-level code refers to executable ASL code that runs during
table load. This is typically used in ASL to declare named objects
based on a condition evaluated during table load like so:
definition_block(...)
{
opreation_region (OPR1, system_memory, ...)
Field (OPR1)
{
FLD1, 8 /* Assume that FLD1's value is 0x1 */
}
/* The if statement below is referred to as module-level code */
If (FLD1)
{
/* Declare DEV1 conditionally */
Device (DEV1) {...}
}
Device (DEV2)
{
...
}
}
In legacy module-level code, the execution of the If statement
was deferred after other modules were loaded. The order of
code execution for the table above is the following:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Load DEV2 to the ACPI Namespace
4.) Execute If (FLD1) and load DEV1 if the condition is true
This legacy approach can be problematic for tables that look like the
following:
definition_block(...)
{
opreation_region (OPR1, system_memory, ...)
Field (OPR1)
{
FLD1, 8 /* Assume that FLD1's value is 0x1 */
}
/* The if statement below is referred to as module-level code */
If (FLD1)
{
/* Declare DEV1 conditionally */
Device (DEV1) {...}
}
Scope (DEV1)
{
/* Add objects DEV1's scope */
Name (OBJ1, 0x1234)
}
}
When loading this in the legacy approach, Scope DEV1 gets evaluated
before the If statement. The following is the order of execution:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Add OBJ1 under DEV1's scope -- ERROR. DEV1 does not exist
4.) Execute If (FLD1) and load DEV1 if the condition is true
The legacy approach can never succeed for tables like this due to the
deferral of the module-level code. Due to this limitation, a new
module-level code was developed. This new approach exeutes if
statements in the order that they appear in the definition block.
With this approach, the order of execution for the above defintion
block is as follows:
1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Execute If (FLD1) and load DEV1 because the condition is true
4.) Add OBJ1 under DEV1's scope.
Since DEV1 is loaded in the namespace in step 3, step 4 executes
successfully.
This change removes support for the legacy module-level code
execution. From this point onward, the new module-level code
execution will be the official approach.
Link: https://github.com/acpica/acpica/commit/47f5607c
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Lenovo Yoga Book uses PWM2 for controlling keyboard backlight but this
device is hidden in the DSDT in Windows version of notebook (if OSID == 1).
Make this device always present for this notebook.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.
The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.
The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This commit refactors the chassis-type detection introduced by
commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).
The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.
Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If query-ARS reports that ARS has stopped and requires continuation
attempt to retrieve short-ARS results before continuing the long
operation.
Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Recent fixes to command handling enabled Linux to read label
configurations that it could not before. Unfortunately that means that
configurations that were operating in label-less mode will be broken as
the kernel ignores the existing namespace configuration and tries to
honor the new found labels.
Fortunately this seems limited to a case where Linux can quirk the
behavior and maintain the existing label-less semantics by default.
When the platform does not emit an _LSW method, disable all label access
methods. Provide a 'force_labels' module parameter to allow read-only
label operation.
Fixes: 11189c1089da ("acpi/nfit: Fix command-supported detection")
Reported-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If the GHES notification type is SDEI, register the provided event
using the SDEI-GHES helper.
SDEI may be one of two types of event, normal and critical. Critical
events can interrupt normal events, so these must have separate
fixmap slots and locks in case both event types are in use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 11189c1089da "acpi/nfit: Fix command-supported detection" broke
ND_CMD_CALL for bus-level commands. The "func = cmd" assumption is only
valid for:
ND_CMD_ARS_CAP
ND_CMD_ARS_START
ND_CMD_ARS_STATUS
ND_CMD_CLEAR_ERROR
The function number otherwise needs to be pulled from the command
payload for:
NFIT_CMD_TRANSLATE_SPA
NFIT_CMD_ARS_INJECT_SET
NFIT_CMD_ARS_INJECT_CLEAR
NFIT_CMD_ARS_INJECT_GET
Update cmd_to_func() for the bus case and call it in the common path.
Fixes: 11189c1089da ("acpi/nfit: Fix command-supported detection")
Cc: <stable@vger.kernel.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Grzegorz Burzynski <grzegorz.burzynski@intel.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For a system using ACPI-based FW without a PPTT, we may get many warnings
about the lack of a PPTT, as shown:
root@(none)$ dmesg | grep -i pptt
[ 0.010125] ACPI PPTT: No PPTT table found, cpu topology may be inaccurate
[ 7.138339] ACPI PPTT: No PPTT table found, cache topology may be inaccurate
[ 7.145368] ACPI PPTT: No PPTT table found, cache topology may be inaccurate
These logs are generated with pr_warn_once(), so the intention was for a
single log, but the logs overlap, so consolidate them.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that ghes notification helpers provide the fixmap slots and
take the lock themselves, multiple NMI-like notifications can
be used on arm64.
These should be named after their notification method as they can't
all be called 'NMI'. x86's NOTIFY_NMI already is, change the SEA
fixmap entry to be called FIX_APEI_GHES_SEA.
Future patches can add support for FIX_APEI_GHES_SEI and
FIX_APEI_GHES_SDEI_{NORMAL,CRITICAL}.
Because all of ghes.c builds on both architectures, provide a
constant for each fixmap entry that the architecture will never
use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Each struct ghes has an worst-case sized buffer for storing the
estatus. If an error is being processed by ghes_proc() in process
context this buffer will be in use. If the error source then triggers
an NMI-like notification, the same buffer will be used by
in_nmi_queue_one_entry() to stage the estatus data, before
__process_error() copys it into a queued estatus entry.
Merge __process_error()s work into in_nmi_queue_one_entry() so that
the queued estatus entry is used from the beginning. Use the new
ghes_peek_estatus() to know how much memory to allocate from
the ghes_estatus_pool before reading the records.
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Change since v6:
* Added a comment explaining the 'ack-error, then goto no_work'.
* Added missing esatus-clearing, which is necessary after reading the GAS,
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_read_estatus() reads the record address, then the record's
header, then performs some sanity checks before reading the
records into the provided estatus buffer.
To provide this estatus buffer the caller must know the size of the
records in advance, or always provide a worst-case sized buffer as
happens today for the non-NMI notifications.
Add a function to peek at the record's header to find the size. This
will let the NMI path allocate the right amount of memory before reading
the records, instead of using the worst-case size, and having to copy
the records.
Split ghes_read_estatus() to create __ghes_peek_estatus() which
returns the address and size of the CPER records.
Signed-off-by: James Morse <james.morse@arm.com>
Changes since v7:
* Grammar
* concistent argument ordering
Changes since v6:
* Additional buf_addr = 0 error handling
* Moved checking out of peek-estatus
* Reworded an error message so we can tell them apart
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_read_estatus() checks various lengths in the top-level header to
ensure the CPER records to be read aren't obviously corrupt.
Take the opportunity to make this more user-friendly, printing a
(ratelimited) message about the nature of the header format error.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
[ rjw: Add missing 'static' ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The NMI-like notifications scribble over ghes->estatus, before
copying it somewhere else. If this interrupts the ghes_probe() code
calling ghes_proc() on each struct ghes, the data is corrupted.
All the NMI-like notifications should use a queued estatus entry
from the beginning, instead of the ghes version, then copying it.
To do this, break up any use of "ghes->estatus" so that all
functions take the estatus as an argument.
This patch just moves these ghes->estatus dereferences into separate
arguments, no change in behaviour. struct ghes becomes unused in
ghes_clear_estatus() as it only wanted ghes->estatus, which we now
pass directly. This is removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_copy_tofrom_phys() uses a different fixmap slot depending on in_nmi().
This doesn't work when there are multiple NMI-like notifications, that
could interrupt each other.
As with the locking, move the chosen fixmap_idx to the notification helper.
This only matters for NMI-like notifications, anything calling
ghes_proc() can use the IRQ fixmap slot as its already holding an irqsave
spinlock.
This lets us collapse the ghes_ioremap_pfn_*() helpers.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_copy_tofrom_phys() takes different locks depending on in_nmi().
This doesn't work if there are multiple NMI-like notifications, that
can interrupt each other.
Now that NOTIFY_SEA is always called in the same context, move the
lock-taking to the notification helper. The helper will always know
which lock to take. This avoids ghes_copy_tofrom_phys() taking a guess
based on in_nmi().
This splits NOTIFY_NMI and NOTIFY_SEA to use different locks. All
the other notifications use ghes_proc(), and are called in process
or IRQ context. Move the spin_lock_irqsave() around their ghes_proc()
calls.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that the estatus queue can be used by more than one notification
method, we can move notifications that have NMI-like behaviour over.
Switch NOTIFY_SEA over to use the estatus queue. This makes it behave
in the same way as x86's NOTIFY_NMI.
Remove Kconfig's ability to turn ACPI_APEI_SEA off if ACPI_APEI_GHES
is selected. This roughly matches the x86 NOTIFY_NMI behaviour, and means
each architecture has at least one user of the estatus-queue, meaning it
doesn't need guarding with ifdef.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The estatus-queue code is currently hidden by the NOTIFY_NMI #ifdefs.
Once NOTIFY_SEA starts using the estatus-queue we can stop hiding
it as each architecture has a user that can't be turned off.
Split the existing CONFIG_HAVE_ACPI_APEI_NMI block in two, and move
the SEA code into the gap.
Move the code around ... and changes the stale comment describing
why the status queue is necessary: printk() is no longer the issue,
its the helpers like memory_failure_queue() that aren't nmi safe.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
During ghes_proc() we use ghes_ack_error() to tell an external agent
we are done with these records and it can re-use the memory.
rc may hold an error returned by ghes_read_estatus(), ENOENT causes
us to skip ghes_ack_error() (as there is nothing to ack), but rc may
also by EIO, which gets supressed.
ghes_clear_estatus() is where we mark the records as processed for
non GHESv2 error sources, and already spots the ENOENT case as
buf_paddr is set to 0 by ghes_read_estatus().
Move the ghes_ack_error() call in here to avoid extra logic with
the return code in ghes_proc().
This enables GHESv2 acking for NMI-like error sources. This is safe
as the buffer is pre-mapped by map_gen_v2() before the GHES is added
to any NMI handler lists.
This same pre-mapping step means we can't receive an error from
apei_read()/write() here as apei_check_gar() succeeded when it
was mapped, and the mapping was cached, so the address can't be
rejected at runtime. Remove the error-returns as this is now
called from a function with no return.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Refactor the estatus queue's pool notification routine from
NOTIFY_NMI's handlers. This will allow another notification
method to use the estatus queue without duplicating this code.
Add rcu_read_lock()/rcu_read_unlock() around the list
list_for_each_entry_rcu() walker. These aren't strictly necessary as
the whole nmi_enter/nmi_exit() window is a spooky RCU read-side
critical section.
in_nmi_queue_one_entry() is separate from the rcu-list walker for a
later caller that doesn't need to walk a list.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Punit Agrawal <punit.agrawal@arm.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
[ rjw: Drop unnecessary err variable in two places ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_read_estatus() sets a flag in struct ghes if the buffer of
CPER records needs to be cleared once the records have been
processed. This flag value is a problem if a struct ghes can be
processed concurrently, as happens at probe time if an NMI arrives
for the same error source. The NMI clears the flag, meaning the
interrupted handler may never do the ghes_estatus_clear() work.
The GHES_TO_CLEAR flags is only set at the same time as
buffer_paddr, which is now owned by the caller and passed to
ghes_clear_estatus(). Use this value as the flag.
A non-zero buf_paddr returned by ghes_read_estatus() means
ghes_clear_estatus() should clear this address. ghes_read_estatus()
already checks for a read of error_status_address being zero,
so CPER records cannot be written here.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_notify_nmi() checks ghes->flags for GHES_TO_CLEAR before going
on to __process_error(). This is pointless as ghes_read_estatus()
will always set this flag if it returns success, which was checked
earlier in the loop. Remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.
This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.
Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes.c has a memory pool it uses for the estatus cache and the estatus
queue. The cache is initialised when registering the platform driver.
For the queue, an NMI-like notification has to grow/shrink the pool
as it is registered and unregistered.
This is all pretty noisy when adding new NMI-like notifications, it
would be better to replace this with a static pool size based on the
number of users.
As a precursor, move the call that creates the pool from ghes_init(),
into hest.c. Later this will take the number of ghes entries and
consolidate the queue allocations.
Remove ghes_estatus_pool_exit() as hest.c doesn't have anywhere to put
this.
The pool is now initialised as part of ACPI's subsys_initcall():
(acpi_init(), acpi_scan_init(), acpi_pci_root_init(), acpi_hest_init())
Before this patch it happened later as a GHES specific device_initcall().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ghes code is careful to parse and round firmware's advertised
memory requirements for CPER records, up to a maximum of 64K.
However when ghes_estatus_pool_expand() does its work, it splits
the requested size into PAGE_SIZE granules.
This means if firmware generates 5K of CPER records, and correctly
describes this in the table, __process_error() will silently fail as it
is unable to allocate more than PAGE_SIZE.
Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory
may fault and be fixed up by vmalloc_fault(). To prevent this call
vmalloc_sync_all() before an NMI handler could discover the memory.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Subsequent patches will split up ghes_read_estatus(), at which
point passing around the 'silent' flag gets annoying. This is to
suppress prink() messages, which prior to commit 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), were
unsafe in NMI context.
This is no longer necessary, remove the flag. printk() messages
are batched in a per-cpu buffer and printed via irq-work, or a call
back from panic().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
oops_begin() exists to group printk() messages with the oops message
printed by die(). To reach this caller we know that platform firmware
took this error first, then notified the OS via NMI with a 'panic'
severity.
Don't wait for another CPU to release the die-lock before panic()ing,
our only goal is to print this fatal error and panic().
This code is always called in_nmi(), and since commit 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), it has been
safe to call printk() from this context. Messages are batched in a
per-cpu buffer and printed via irq-work, or a call back from panic().
Link: https://patchwork.kernel.org/patch/10313555/
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There was a divergence between Linux and ACPICA on the definition of
ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's
definition in 4c1379d7bb42. After resolving the divergence, it was
clear that Linux users wanted to use their old set of debug flags.
This change fixes the divergence by setting these debug flags during
acpi_early_init() rather than during global variable initialization
in acpixf.h (owned by ACPICA).
Fixes: 4c1379d7bb42 ("ACPICA: Debug output: Add option to display method/object evaluation")
Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
No need for the array of structs of function pointers when we can just
call the handfull of functions directly.
This could be further cleaned up if acpi_gbl_reduced_hardware was defined
true in the ACPI_REDUCED_HARDWARE case, but that's material for the next
round.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
a HID of BSG2150 describing the 2 Bosch sensors used in the device a
BMC150 compatible accelerometer and a BMC150 compatible magnetometer.
The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
but this seems to be a copy and paste job from the BSG1160 firmware node
on other devices, since there is no i2c-client listening to the 0x68
address listed in the third resource and the 0x68 address is identical
to the address of the third resource in the BSG1160 nodes, where as the
other 2 addresses are different.
Add the ID to the I2C multi instantiate list, so that the
i2c-multi-instantiate.c driver can handle it;
And add the necessary info to the i2c-multi-instantiate.c driver to
enumerate all I2C slaves correctly.
To avoid triggering the:
if (i < multi->num_clients) {
dev_err(dev, "Error finding driver, idx %d\n", i);
Error this commit lists the 3th device in the i2c_inst_data with a
type of "bsg2150_dummy_dev".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with
the existing Linux namespace implementation because it uses
NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an
platform / DIMM that does not provide BLK-aperture access. Allow the
libnvdimm core to assume no potential for aliasing. In case other
implementations make the same mistake, provide a "noblk" module
parameter to force-enable the quirk.
Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
On some Samsung hardware, it is necessary to clear events accumulated by
the EC during sleep. These ECs stop reporting GPEs until they are manually
polled, if too many events are accumulated.
Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands
unconditionally after resume to clear all the EC query events on those
platforms.
Later, commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk")
removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ
polling logic should handle this case.
Now it has been proved that the EC IRQ Polling logic does not fix the
issue actually because we got regression report on these Samsung
platforms after removing the quirk.
Thus revert commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME
quirk") to introduce back the Samsung quirk in this patch.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Tested-by: Ortwin Glück <odi@odi.ch>
Tested-by: Francisco Cribari <cribari@gmail.com>
Tested-by: Balazs Varga <balazs4web@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Consolidate boot EC checks in acpi_ec_add(), put the acpi_is_boot_ec()
checks directly into it and drop the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that acpi_ec_add() calls acpi_config_boot_ec() when it finds
that the device object passed to it represents a "boot" EC, but in
that case the ec pointer passed to acpi_config_boot_ec() is guaranteed
to be equal to boot_ec and ec->handle is passed as the handle
argument to it, so acpi_config_boot_ec() really only calls
acpi_ec_setup() and prints a message.
Avoid the pointless checks in acpi_config_boot_ec() by calling
acpi_ec_setup() directly and print the message separately.
With the above changes in place, there are no users of
acpi_config_boot_ec(), so drop it.
No intentional functional impact except for a changed message.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since acpi_ec_dsdt_probe() returns early if boot_ec is set, it is
always unset when that function calls acpi_config_boot_ec() (passing
ec->handle as the handle argument to it). Thus it is not really
useful to call acpi_config_boot_ec() at that point. It is sufficient to
call acpi_ec_setup() directly and (if that is successful) set boot_ec,
so make acpi_ec_dsdt_probe() do that and avoid some pointless checks
in acpi_config_boot_ec().
No intentional functional impact except for a changed message.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since acpi_ec_ecdt_probe() is called when boot_ec is not set, it
doesn't neeed to take the other possibility into account.
Accordingly, it only needs to set the handle field in the ec object
to ACPI_ROOT_OBJECT, call acpi_ec_setup() and (if that is successful)
set boot_ec to ec and boot_ec_is_ecdt to 'true'. Make it do so
directly, without calling acpi_config_boot_ec(), and avoid some
pointless checks in the latter.
No intentional functional impact except for a changed message.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The boot_ec variable is not used outside of the file it is defined
in, so declare it as static.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the Hyper-V _DSM command set to the white list of NVDIMM command
sets.
This command set is documented at http://www.uefi.org/RFIC_LIST
(see "Virtual NVDIMM 0x1901").
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In the case of ND_CMD_CALL, we should also check out_obj->type.
The patch uses out_obj->type, which is a short alias to
out_obj->package.type.
Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The implementation is broken in all the ways the unit test did not touch:
1/ The local definition of in_buf and in_obj violated C99 initializer
expectations for zeroing. By only initializing 2 out of the three
struct members the compiler was free to zero-initialize the remaining
entry even though the aliased location in the union was initialized.
2/ The implementation made assumptions about the state of the 'smart'
payload after command execution that are satisfied by
acpi_nfit_ctl(), but not acpi_evaluate_dsm().
3/ populate_shutdown_status() is skipped on Intel NVDIMMs due to the early
return for skipping the common _LS{I,R,W} enabling.
4/ The input length should be zero.
This breakage was missed due to the unit test implementation only
testing the case where nfit_intel_shutdown_status() returns a valid
payload.
Much of this complexity would be saved if acpi_nfit_ctl() could be used, but
that currently requires a 'struct nvdimm *' argument and one is not created
until later in the init process. The health result is needed before the device
is created because the payload gates whether the nmemX/nfit/dirty_shutdown
property is visible in sysfs.
Cc: <stable@vger.kernel.org>
Fixes: 0ead11181fe0 ("acpi, nfit: Collect shutdown status")
Reported-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
It is too much to add extra header search path for all files in
drivers/acpi/dptf/.
Fix up one C file, and remove the header search path.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Both acpi_ec_dsdt_probe() and acpi_ec_ecdt_probe() may be void as
their return values are ignored anyway. This allows a couple of
gotos and labels to go away from there.
Moreover, acpi_ec_ecdt_probe() only needs to allocate the ec
object after getting the ECDT pointer and checking it, so the
pointless memory allocation and release on systems without the
ECDT can be avoided by reordering it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The err_exit label in acpi_aml_init() is not used any more after
commit 9ec6dbfbdc0a ("ACPI: no need to check return value of
debugfs_create functions"), but the other label in there is not
necessary too, so rearrange the code to get rid of them both.
No intentional functional impact.
Fixes: 9ec6dbfbdc0a ("ACPI: no need to check return value of debugfs_create functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The _DSM function number validation only happens to succeed when the
generic Linux command number translation corresponds with a
DSM-family-specific function number. This breaks NVDIMM-N
implementations that correctly implement _LSR, _LSW, and _LSI, but do
not happen to publish support for DSM function numbers 4, 5, and 6.
Recall that the support for _LS{I,R,W} family of methods results in the
DIMM being marked as supporting those command numbers at
acpi_nfit_register_dimms() time. The DSM function mask is only used for
ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices.
Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command...")
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/issues/78
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
