summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2017-08-13Merge tag 'tty-4.13-rc5' of ↵Linus Torvalds1-2/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44
2017-08-03Merge branches 'acpi-soc', 'acpi-wdat' and 'acpi-cppc'Rafael J. Wysocki3-3/+22
* acpi-soc: ACPI: APD: Fix HID for Hisilicon Hip07/08 ACPI / LPSS: Only call pwm_add_table() for the first PWM controller * acpi-wdat: ACPI / watchdog: Fix init failure with overlapping register regions * acpi-cppc: mailbox: pcc: Fix crash when request PCC channel 0
2017-07-30tty: pl011: fix initialization order of QDF2400 E44Timur Tabi1-2/+34
The work-around for Qualcomm Technologies QDF2400 Erratum 44 hinges on a global variable defined in the pl011 driver. The ACPI SPCR parsing code determines whether the work-around is needed, and if so, it changes the console name from "pl011" to "qdf2400_e44". The expectation is that the pl011 driver will implement the work-around when it sees the console name. The global variable qdf2400_e44_present is set when that happens. The problem is that work-around needs to be enabled when the pl011 driver probes, not when the console name is queried. However, sbsa_probe() is called before pl011_console_match(). The work-around appeared to work previously because the default console on QDF2400 platforms was always ttyAMA1. The first time sbsa_probe() is called (for ttyAMA0), qdf2400_e44_present is still false. Then pl011_console_match() is called, and it sets qdf2400_e44_present to true. All subsequent calls to sbsa_probe() enable the work-around. The solution is to move the global variable into spcr.c and let the pl011 driver query it during probe time. This works because all QDF2400 platforms require SPCR, so parse_spcr() will always be called. pl011_console_match still checks for the "qdf2400_e44" console name, but it doesn't do anything else special. Fixes: 5a0722b898f8 ("tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44") Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-30ACPI: APD: Fix HID for Hisilicon Hip07/08Hanjun Guo1-2/+2
ACPI HID for Hisilicon Hip07/08 should be HISI02A1/2, not HISI0A21/2, HISI02A1/2 was tested ok but was modified by the stupid typo when upstream the patches (by me), correct them to the right IDs (matching the IDs in drivers/i2c/busses/i2c-designware-platdrv.c). Fixes: 6e14cf361a0c (ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller) Reported-by: Tao Tian <tiantao6@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27Merge branches 'acpi-pm' and 'acpi-numa'Rafael J. Wysocki2-2/+10
* acpi-pm: ACPI / PM / EC: Flush all EC work in acpi_freeze_sync() ACPI / EC: Add parameter to force disable the GPE on suspend * acpi-numa: ACPI: NUMA: Fix typo in the full name of SRAT ACPI: NUMA: add missing include in acpi_numa.h
2017-07-26ACPI / watchdog: Fix init failure with overlapping register regionsRyan Kennedy1-1/+6
Partially overlapping regions cause platform device creation to fail. The latter of two overlapping resources will fail to be reserved. Fix this by merging overlapping resource ranges while enumerating WDAT table entries. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24ACPI: NUMA: Fix typo in the full name of SRATRoss Zwisler1-1/+1
To save someone the time of searching the ACPI spec for "Static Resource Affinity Table". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()Rafael J. Wysocki3-3/+15
Commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) introduced acpi_freeze_sync() whose purpose is to flush all of the processing of possible wakeup events signaled via the ACPI SCI. However, it doesn't flush the query workqueue used by the EC driver, so the events generated by the EC may not be processed timely which leads to issues (increased overhead at least, lost events possibly). To fix that introduce acpi_ec_flush_work() that will flush all of the outstanding EC work and call it from acpi_freeze_sync(). Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20Merge branch 'acpi-ec' into acpi-pmRafael J. Wysocki1-0/+31
2017-07-19ACPI / EC: Add parameter to force disable the GPE on suspendRafael J. Wysocki1-0/+31
After commit 8110dd281e15 (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems) the configuration of GPEs, including the EC one, is not changed during suspend-to-idle on recent systems. That's in order to make system wakeup events generated by the EC work, in particular. However, on some of the systems in question (for example on Dell XPS13 9365), in addition to generating system wakeup events the EC generates a heartbeat sequence of interrupts that have nothing to do with wakeup while suspended, and the Low Power Idle S0 _DSM interface doesn't change that behavior. The users of those systems may prefer to disable the EC GPE during system suspend, for the cost of non-functional power button wakeup or similar, but currently there is no way to do that. For this reason, add a new module parameter, ec_no_wakeup, for the EC driver module that, if set, will cause the EC GPE to be disabled during system suspend and re-enabled during the subsequent system resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=192591#c106 Amends: 8110dd281e15 (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems) Reported-and-tested-by: Patrik Kullman <patrik.kullman@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-17acpi/nfit: Fix memory corruption/Unregister mce decoder on failurePrarit Bhargava1-1/+9
nfit_init() calls nfit_mce_register() on module load. When the module load fails the nfit mce decoder is not unregistered. The module's memory is freed leaving the decoder chain referencing junk. This will cause panics as future registrations will reference the free'd memory. Unregister the nfit mce decoder on module init failure. [v2]: register and then unregister mce handler to avoid losing mce events [v3]: also cleanup nfit workqueue Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Cc: <stable@vger.kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: lszubowi@redhat.com Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-14Merge tag 'acpi-fixes-4.13-rc1' of ↵Linus Torvalds3-26/+40
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the return value of an IRQ mapping routine in the ACPI core, fix an EC driver issue causing abnormal fan behavior after system resume on some systems and add quirks for ACPI device objects that need to be treated as "always present" to work around bogus implementations of the _STA control method. Specifics: - Fix the return value of acpi_gsi_to_irq() to make the GSI to IRQ mapping work on the Mustang (ARM64) platform (Mark Salter). - Fix an EC driver issue that causes fans to behave abnormally after system resume on some systems which turns out to be related to switching over the EC into the polling mode during the noirq stages of system suspend and resume (Lv Zheng). - Add quirks for ACPI device objects that need to be treated as "always present", because their _STA methods are designed to work around Windows driver bugs and return garbage from our perspective (Hans de Goede)" * tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids ACPI / x86: Allow matching always_present_id array entries by DMI Revert "ACPI / EC: Enable event freeze mode..." to fix a regression ACPI / EC: Drop EC noirq hooks to fix a regression ACPI / irq: Fix return code of acpi_gsi_to_irq()
2017-07-14Merge branches 'acpi-ec', 'acpi-irq' and 'acpi-quirks'Rafael J. Wysocki3-26/+40
* acpi-ec: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression ACPI / EC: Drop EC noirq hooks to fix a regression * acpi-irq: ACPI / irq: Fix return code of acpi_gsi_to_irq() * acpi-quirks: ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids ACPI / x86: Allow matching always_present_id array entries by DMI
2017-07-12Merge tag 'iommu-updates-v4.13' of ↵Linus Torvalds1-20/+63
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ...
2017-07-12ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids arrayHans de Goede1-0/+13
The GPD win BIOS dated 20170320 has disabled the accelerometer, the drivers sometimes cause crashes under Windows and this is how the manufacturer has solved this :| I see no other way to keep the accelerometer working under Windows then adding it to the always_present_ids array. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_idsHans de Goede1-0/+9
The _STA method of the Venue 11 Pro 7130 touchscreen has this ugliness: Method (_STA, 0, NotSerialized) // _STA: Status { If ((SDS1 & One) == One) { If (RST1 == Zero) { Return (0x0F) } ElseIf (RST2 == Zero) { RST2 = One TMRV = Timer } Else { Local0 = ((Timer - TMRV) / 0x2710) If (Local0 > TMRI) { RST2 = Zero RST1 = Zero } } } Else { Return (Zero) } } Whereby RST1 gets set by _SB.PCI0.GFX0.LCD.LCD1._ON, this means that after RST1 has been set first _STA must be called to set TIMER and then after enough time has elapsed _STA must be called twice more, once to clear RST1 and once to finally return 0xf before the touchscreen will show up. Which is just crazy. This commit adds an always_present_ids entry for the SYNA7500 touchscreen ACPI node, together with a DMI match for the Venue 11 Pro 7130, fixing the touchscreen not working on this device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12ACPI / x86: Allow matching always_present_id array entries by DMIHans de Goede1-4/+15
On some x86 systems the DSDT hides APCI devices to work around Windows driver bugs. On one such system the device is even hidden until a certain time after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed *and* _STA has been called at least 3 times since. TL;DR: it is a mess. Until now the always_present_id matching was used to force status for a whole class of devices, e.g. always enable PWM1 on CHerry Trail devices. This commit extends the always_present_id matching code to optionally also check for a DMI match so that we can also add system specific quirks to the always_present_id array. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12Revert "ACPI / EC: Enable event freeze mode..." to fix a regressionLv Zheng1-1/+1
On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier EC event freezing timing causes acpitz-virtual-0 to report a stuck 48C temparature. And with EC firmware revisioned as 1.14, without reverting back to old EC event freezing timing, the fan still blows up after a system resume. This reverts the culprit change so that the regression can be fixed without upgrading the EC firmware. Fixes: d30283057ecd (ACPI / EC: Enable event freeze mode to improve event handling) Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168 Tested-by: Damjan Georgievski <gdamjan@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12ACPI / EC: Drop EC noirq hooks to fix a regressionLv Zheng1-19/+0
According to bug reports, although the busy polling mode can make noirq stages execute faster, it causes abnormal fan blowing up after system resume (see the first link below for a video demonstration) on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can be fixed by upgrading the EC firmware on that machine. However, many reporters confirm that the problem can be fixed by stopping busy polling during suspend/resume and for some of them upgrading the EC firmware is not an option. For this reason, drop the noirq stage hooks from the EC driver to fix the regression. Fixes: c3a696b6e8f8 (ACPI / EC: Use busy polling mode when GPE is not enabled) Link: https://youtu.be/9NQ9x-Jm99Q Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129 Reported-by: Andreas Lindhe <andreas@lindhe.io> Tested-by: Gjorgji Jankovski <j.gjorgji@gmail.com> Tested-by: Damjan Georgievski <gdamjan@gmail.com> Tested-by: Fernando Chaves <nanochaves@gmail.com> Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com> Tested-by: Denis P. <theoriginal.skullburner@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12ACPI / irq: Fix return code of acpi_gsi_to_irq()Mark Salter1-2/+2
The function acpi_gsi_to_irq() must return 0 on success as the caller ghes_probe expects an 0 for success. This change also matches x86 implementation. This patch was submitted around 4.5 timeframe but wasn't pushed because it didn't fix a real problem. Now that RAS/GHES patches are in kernel, this fixes an error seen on a Mustang (arm64) platform: GHES: Failed to map GSI to IRQ for generic hardware error source: 2 GHES: probe of GHES.2 failed with error 81 Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-10Merge tag 'devprop-4.13-rc1' of ↵Linus Torvalds4-8/+125
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These mostly rearrange the device properties core code and add a few helper functions to it as a foundation for future work. Specifics: - Rearrange the core device properties code by moving the code specific to each supported platform configuration framework (ACPI, DT and build-in) into a separate file (Sakari Ailus). - Add helper functions for accessing device properties in a firmware-agnostic way (Sakari Ailus, Kieran Bingham)" * tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Add fwnode_graph_get_port_parent device property: Add FW type agnostic fwnode_graph_get_remote_node device property: Introduce fwnode_device_is_available() device property: Move fwnode graph ops to firmware specific locations device property: Move FW type specific functionality to FW specific files ACPI: Constify argument to acpi_device_is_present()
2017-07-10Merge tag 'acpi-extra-4.13-rc1' of ↵Linus Torvalds8-18/+67
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix the ACPI SPCR table handling and add a workaround for APM X-Gene 8250 UART on top of that, fix two ACPI hotplug issues related to hot-remove failures, add a missing "static" to one function and constify some attribute_group structures. Specifics: - Fix the ACPI code handling the SPCR table to check access width of MMIO regions and add a workaround for APM X-Gene 8250 UART to use 32-bit MMIO accesses with its register (Loc Ho). - Fix two ACPI-based hotplug issues related to the handling of hot-remove failures on the OS side (Chun-Yi Lee). - Constify attribute_group structures in a few places (Arvind Yadav). - Make one local function static (Colin Ian King)" * tag 'acpi-extra-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / DPTF: constify attribute_group structures ACPI / LPSS: constify attribute_group structures ACPI: BGRT: constify attribute_group structures ACPI / power: constify attribute_group structures ACPI / scan: Indicate to platform when hot remove returns busy ACPI / bus: handle ACPI hotplug schedule errors completely ACPI / osi: Make local function acpi_osi_dmi_linux() static ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata ACPI: SPCR: Use access width to determine mmio usage
2017-07-10Merge branches 'acpi-spcr', 'acpi-osi', 'acpi-bus', 'acpi-scan' and 'acpi-misc'Rafael J. Wysocki8-18/+67
* acpi-spcr: ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata ACPI: SPCR: Use access width to determine mmio usage * acpi-osi: ACPI / osi: Make local function acpi_osi_dmi_linux() static * acpi-bus: ACPI / bus: handle ACPI hotplug schedule errors completely * acpi-scan: ACPI / scan: Indicate to platform when hot remove returns busy * acpi-misc: ACPI / DPTF: constify attribute_group structures ACPI / LPSS: constify attribute_group structures ACPI: BGRT: constify attribute_group structures ACPI / power: constify attribute_group structures
2017-07-07Merge tag 'libnvdimm-for-4.13' of ↵Linus Torvalds3-27/+146
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
2017-07-06ACPI / LPSS: Only call pwm_add_table() for the first PWM controllerHans de Goede1-0/+14
At least on the UP board SBC both PWMs are enabled leading to us trying to add the same pwm_lookup twice, which leads to the following: [ 0.902224] list_add double add: new=ffffffffb8efd400, prev=ffffffffb8efd400, next=ffffffffb8eeede0. [ 0.912466] ------------[ cut here ]------------ [ 0.917624] kernel BUG at lib/list_debug.c:31! [ 0.922588] invalid opcode: 0000 [#1] SMP ... [ 1.027450] Call Trace: [ 1.030185] pwm_add_table+0x4c/0x90 [ 1.034181] bsw_pwm_setup+0x1a/0x20 [ 1.038175] acpi_lpss_create_device+0xfe/0x420 ... This commit fixes this by only calling pwm_add_table() for the first PWM controller (which is the one used for the backlight). Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458599 Fixes: bf7696a12071 (acpi: lpss: call pwm_add_table() for BSW...) Fixes: 04434ab5120a (ACPI / LPSS: Call pwm_add_table() for Bay Trail...) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.11+ <stable@vger.kernel.org> # 4.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-05Merge tag 'arm64-upstream' of ↵Linus Torvalds4-47/+196
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-07-04Merge tag 'acpi-4.13-rc1' of ↵Linus Torvalds55-394/+1627
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These mostly update the ACPICA code in the kernel to upstream revision 20170531 which covers all of the new material from ACPI 6.2, including new tables (WSMT, HMAT, PPTT), new subtables and definition changes for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource descriptor macros for pin control, support for new predefined methods (_LSI, _LSR, _LSW, _HMA), fixes and cleanups. On top of that, an additional ACPICA change from Kees (which also is upstream already) switches all of the definitions of function pointer structures in ACPICA to use designated initializers so as to make the structure layout randomization GCC plugin work with it. The rest is a few fixes and cleanups in the EC driver, an xpower PMIC driver update, a new backlight blacklist entry, and update of the tables configfs interface and a messages formatting cleanup. Specifics: - Update the ACPICA code in the kernel to upstream revision revision 20170531 (which covers all of the new material from ACPI 6.2) including: * Support for the PinFunction(), PinConfig(), PinGroup(), PinGroupFunction(), and PinGroupConfig() resource descriptors (Mika Westerberg). * Support for new subtables in HEST and SRAT, new notify value for HEST, header support for TPM2 table changes, and BGRT Status field update (Bob Moore). * Support for new PCCT subtables (David Box). * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods (Erik Schmauss). * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng). * New UUID values for Processor Properties (Bob Moore). * New notify values for memory attributes and graceful shutdown (Bob Moore). * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand). * Resource to AML conversion fix for resources containing GPIOs (Mika Westerberg). * Disassembler-related updates (Bob Moore, David Box, Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng, Cao Jin). - Modify ACPICA to always use designated initializers for function pointer structures to make the structure layout randomization GCC plugin work with it (Kees Cook). - Update the tables configfs interface to unload SSDTs on configfs entry removal (Jan Kiszka). - Add support for the GPI1 regulator to the xpower PMIC Operation Region handler (Hans de Goede). - Fix ACPI EC issues related to conflicting EC definitions in the ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris Chiu). - Fix an interrupt storm issue in the EC driver and make its debug output work with dynamic debug as expected (Lv Zheng). - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee). - Fix whitespace in pr_fmt() to align log entries properly in some places in the ACPI subsystem (Vincent Legoll)" * tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI / video: Add quirks for the Dell Precision 7510 ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ...
2017-07-04Merge tag 'pm-4.13-rc1' of ↵Linus Torvalds9-89/+210
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The big ticket items here are the rework of suspend-to-idle in order to add proper support for power button wakeup from it on recent Dell laptops and the rework of interfaces exporting the current CPU frequency on x86. In addition to that, support for a few new pieces of hardware is added, the PCI/ACPI device wakeup infrastructure is simplified significantly and the wakeup IRQ framework is fixed to unbreak the IRQ bus locking infrastructure. Also, there are some functional improvements for intel_pstate, tools updates and small fixes and cleanups all over. Specifics: - Rework suspend-to-idle to allow it to take wakeup events signaled by the EC into account on ACPI-based platforms in order to properly support power button wakeup from suspend-to-idle on recent Dell laptops (Rafael Wysocki). That includes the core suspend-to-idle code rework, support for the Low Power S0 _DSM interface, and support for the ACPI INT0002 Virtual GPIO device from Hans de Goede (required for USB keyboard wakeup from suspend-to-idle to work on some machines). - Stop trying to export the current CPU frequency via /proc/cpuinfo on x86 as that is inaccurate and confusing (Len Brown). - Rework the way in which the current CPU frequency is exported by the kernel (over the cpufreq sysfs interface) on x86 systems with the APERF and MPERF registers by always using values read from these registers, when available, to compute the current frequency regardless of which cpufreq driver is in use (Len Brown). - Rework the PCI/ACPI device wakeup infrastructure to remove the questionable and artificial distinction between "devices that can wake up the system from sleep states" and "devices that can generate wakeup signals in the working state" from it, which allows the code to be simplified quite a bit (Rafael Wysocki). - Fix the wakeup IRQ framework by making it use SRCU instead of RCU which doesn't allow sleeping in the read-side critical sections, but which in turn is expected to be allowed by the IRQ bus locking infrastructure (Thomas Gleixner). - Modify some computations in the intel_pstate driver to avoid rounding errors resulting from them (Srinivas Pandruvada). - Reduce the overhead of the intel_pstate driver in the HWP (hardware-managed P-states) mode and when the "performance" P-state selection algorithm is in use by making it avoid registering scheduler callbacks in those cases (Len Brown). - Rework the energy_performance_preference sysfs knob in intel_pstate by changing the values that correspond to different symbolic hint names used by it (Len Brown). - Make it possible to use more than one cpuidle driver at the same time on ARM (Daniel Lezcano). - Make it possible to prevent the cpuidle menu governor from using the 0 state by disabling it via sysfs (Nicholas Piggin). - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on AMD systems (Yazen Ghannam). - Make the CPPC cpufreq driver take the lowest nonlinear performance information into account (Prashanth Prakash). - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q driver and clean up the sfi, exynos5440 and intel_pstate drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael Wysocki, Tao Wang). - Fix a few minor issues in the generic power domains (genpd) framework and clean it up somewhat (Krzysztof Kozlowski, Mikko Perttunen, Viresh Kumar). - Fix a couple of minor issues in the operating performance points (OPP) framework and clean it up somewhat (Viresh Kumar). - Fix a CONFIG dependency in the hibernation core and clean it up slightly (Balbir Singh, Arvind Yadav, BaoJun Luo). - Add rk3228 support to the rockchip-io adaptive voltage scaling (AVS) driver (David Wu). - Fix an incorrect bit shift operation in the RAPL power capping driver (Adam Lessnau). - Add support for the EPP field in the HWP (hardware managed P-states) control register, HWP.EPP, to the x86_energy_perf_policy tool and update msr-index.h with HWP.EPP values (Len Brown). - Fix some minor issues in the turbostat tool (Len Brown). - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a minor issue in it (Sherry Hurwitz). - Assorted cleanups, mostly related to the constification of some data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof Kozlowski)" * tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits) cpufreq: Update scaling_cur_freq documentation cpufreq: intel_pstate: Clean up after performance governor changes PM: hibernate: constify attribute_group structures. cpuidle: menu: allow state 0 to be disabled intel_idle: Use more common logging style PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags PM / QoS: constify *_attribute_group. PM / AVS: rockchip-io: add io selectors and supplies for rk3228 powercap/RAPL: prevent overridding bits outside of the mask PM / sysfs: Constify attribute groups ...
2017-07-04ACPI / DPTF: constify attribute_group structuresArvind Yadav1-1/+1
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 904 496 0 1400 578 drivers/acpi/dptf/dptf_power.o File size After adding 'const': text data bss dec hex filename 944 432 0 1376 560 drivers/acpi/dptf/dptf_power.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI / LPSS: constify attribute_group structuresArvind Yadav1-1/+1
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI: BGRT: constify attribute_group structuresArvind Yadav1-1/+1
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI / power: constify attribute_group structuresArvind Yadav1-5/+5
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 4622 304 8 4934 1346 drivers/acpi/power.o File size After adding 'const': text data bss dec hex filename 4846 80 8 4934 1346 drivers/acpi/power.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI / scan: Indicate to platform when hot remove returns busyLee, Chun-Yi1-5/+13
In hotplug logic, it always indicates non-specific failure to platform through _OST when handing ACPI hot-remove event failed. Then platform terminates the hot-remove process but it can not identify the reason. Base on current hot-remove code, there have two situations that it returns busy: - OSPM try to offline an individual device, but the device offline function returns "busy". - When the ejection event is applied to an "not offlined yet" container. OSPM sends a kobject change event to userspace and returns "busy". Both of them will returns -EBUSY to ACPI device hotplug function. Then, the hotplug function indicates non-specific failure to platform just like for any other error, e.g. -ENODEV or -EIO. The benefit to the platform for identifying the OS "busy" state is that it can use a different approach to handle the "busy" instead of simply terminating the hot-remove operation for an unknown reason. For example, the platform can wait for a while and then re-trigger hot-remove. Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [ rjw: Changelog massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI / bus: handle ACPI hotplug schedule errors completelyLee, Chun-Yi1-2/+6
Kernel should decrements the reference count of ACPI device when the scheduling of ACPI hotplug work failed, and evaluates _OST to notify BIOS the failure. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI / osi: Make local function acpi_osi_dmi_linux() staticColin Ian King1-1/+2
The function acpi_osi_dmi_linux() is local and does not need to be in global scope, so make it static. Cleans up sparse warning: "symbol 'acpi_osi_dmi_linux' was not declared. Should it be static?" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errataLoc Ho1-0/+22
APM X-Gene verion 1 and 2 have an 8250 UART with its register aligned to 32-bit. In addition, the latest released BIOS encodes the access field as 8-bit access instead 32-bit access. This causes no console with ACPI boot as the console will not match X-Gene UART port due to the lack of mmio32 option. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04ACPI: SPCR: Use access width to determine mmio usageLoc Ho1-2/+16
The current SPCR code does not check the access width of the MMIO, and uses a default of 8bit register accesses. This prevents devices that only do 16 or 32bit register accesses from working. By simply checking this field and setting the MMIO string appropriately, this issue can be corrected. To prevent any legacy issues, the code will default to 8bit accesses if the value is anything but 16 or 32. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-03Merge branch 'ras-core-for-linus' of ↵Linus Torvalds1-14/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Thomas Gleixner: "The RAS updates for the 4.13 merge window: - Cleanup of the MCE injection facility (Borsilav Petkov) - Rework of the AMD/SMCA handling (Yazen Ghannam) - Enhancements for ACPI/APEI to handle new notitication types (Shiju Jose) - atomic_t to refcount_t conversion (Elena Reshetova) - A few fixes and enhancements all over the place" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: RAS/CEC: Check the correct variable in the debugfs error handling x86/mce: Always save severity in machine_check_poll() x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise x86/mce: Update bootlog description to reflect behavior on AMD x86/mce: Don't disable MCA banks when offlining a CPU on AMD x86/mce/mce-inject: Preset the MCE injection struct x86/mce: Clean up include files x86/mce: Get rid of register_mce_write_callback() x86/mce: Merge mce_amd_inj into mce-inject x86/mce/AMD: Use saved threshold block info in interrupt handler x86/mce/AMD: Use msr_stat when clearing MCA_STATUS x86/mce/AMD: Carve out SMCA bank configuration x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t RAS: Make local function parse_ras_param() static ACPI/APEI: Handle GSIV and GPIO notification types
2017-07-03Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug updates from Thomas Gleixner: "This update is primarily a cleanup of the CPU hotplug locking code. The hotplug locking mechanism is an open coded RWSEM, which allows recursive locking. The main problem with that is the recursive nature as it evades the full lockdep coverage and hides potential deadlocks. The rework replaces the open coded RWSEM with a percpu RWSEM and establishes full lockdep coverage that way. The bulk of the changes fix up recursive locking issues and address the now fully reported potential deadlocks all over the place. Some of these deadlocks have been observed in the RT tree, but on mainline the probability was low enough to hide them away." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) cpu/hotplug: Constify attribute_group structures powerpc: Only obtain cpu_hotplug_lock if called by rtasd ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init cpu/hotplug: Remove unused check_for_tasks() function perf/core: Don't release cred_guard_mutex if not taken cpuhotplug: Link lock stacks for hotplug callbacks acpi/processor: Prevent cpu hotplug deadlock sched: Provide is_percpu_thread() helper cpu/hotplug: Convert hotplug locking to percpu rwsem s390: Prevent hotplug rwsem recursion arm: Prevent hotplug rwsem recursion arm64: Prevent cpu hotplug rwsem recursion kprobes: Cure hotplug lock ordering issues jump_label: Reorder hotplug lock and jump_label_lock perf/tracing/cpuhotplug: Fix locking order ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus() PCI: Replace the racy recursion prevention PCI: Use cpu_hotplug_disable() instead of get_online_cpus() perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode() x86/perf: Drop EXPORT of perf_check_microcode ...
2017-07-03Merge branch 'for-4.13/dax' into libnvdimm-for-nextDan Williams1-5/+10
2017-07-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Add the SYSTEM_SCHEDULING bootup state to move various scheduler debug checks earlier into the bootup. This turns silent and sporadically deadly bugs into nice, deterministic splats. Fix some of the splats that triggered. (Thomas Gleixner) - A round of restructuring and refactoring of the load-balancing and topology code (Peter Zijlstra) - Another round of consolidating ~20 of incremental scheduler code history: this time in terms of wait-queue nomenclature. (I didn't get much feedback on these renaming patches, and we can still easily change any names I might have misplaced, so if anyone hates a new name, please holler and I'll fix it.) (Ingo Molnar) - sched/numa improvements, fixes and updates (Rik van Riel) - Another round of x86/tsc scheduler clock code improvements, in hope of making it more robust (Peter Zijlstra) - Improve NOHZ behavior (Frederic Weisbecker) - Deadline scheduler improvements and fixes (Luca Abeni, Daniel Bristot de Oliveira) - Simplify and optimize the topology setup code (Lauro Ramos Venancio) - Debloat and decouple scheduler code some more (Nicolas Pitre) - Simplify code by making better use of llist primitives (Byungchul Park) - ... plus other fixes and improvements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) sched/cputime: Refactor the cputime_adjust() code sched/debug: Expose the number of RT/DL tasks that can migrate sched/numa: Hide numa_wake_affine() from UP build sched/fair: Remove effective_load() sched/numa: Implement NUMA node level wake_affine() sched/fair: Simplify wake_affine() for the single socket case sched/numa: Override part of migrate_degrades_locality() when idle balancing sched/rt: Move RT related code from sched/core.c to sched/rt.c sched/deadline: Move DL related code from sched/core.c to sched/deadline.c sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled sched/fair: Spare idle load balancing on nohz_full CPUs nohz: Move idle balancer registration to the idle path sched/loadavg: Generalize "_idle" naming to "_nohz" sched/core: Drop the unused try_get_task_struct() helper function sched/fair: WARN() and refuse to set buddy when !se->on_rq sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h> sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h> ...
2017-07-03Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuidLinus Torvalds6-77/+53
Pull uuid subsystem from Christoph Hellwig: "This is the new uuid subsystem, in which Amir, Andy and I have started consolidating our uuid/guid helpers and improving the types used for them. Note that various other subsystems have pulled in this tree, so I'd like it to go in early. UUID/GUID summary: - introduce the new uuid_t/guid_t types that are going to replace the somewhat confusing uuid_be/uuid_le types and make the terminology fit the various specs, as well as the userspace libuuid library. (me, based on a previous version from Amir) - consolidated generic uuid/guid helper functions lifted from XFS and libnvdimm (Amir and me) - conversions to the new types and helpers (Amir, Andy and me)" * tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits) ACPI: hns_dsaf_acpi_dsm_guid can be static mmc: sdhci-pci: make guid intel_dsm_guid static uuid: Take const on input of uuid_is_null() and guid_is_null() thermal: int340x_thermal: fix compile after the UUID API switch thermal: int340x_thermal: Switch to use new generic UUID API acpi: always include uuid.h ACPI: Switch to use generic guid_t in acpi_evaluate_dsm() ACPI / extlog: Switch to use new generic UUID API ACPI / bus: Switch to use new generic UUID API ACPI / APEI: Switch to use new generic UUID API acpi, nfit: Switch to use new generic UUID API MAINTAINERS: add uuid entry tmpfs: generate random sb->s_uuid scsi_debug: switch to uuid_t nvme: switch to uuid_t sysctl: switch to use uuid_t partitions/ldm: switch to use uuid_t overlayfs: use uuid_t instead of uuid_be fs: switch ->s_uuid to uuid_t ima/policy: switch to use uuid_t ...
2017-07-03Merge branches 'acpi-ec' and 'acpi-video'Rafael J. Wysocki2-12/+78
* acpi-ec: ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue * acpi-video: ACPI / video: Add quirks for the Dell Precision 7510
2017-07-03Merge branches 'acpi-pmic', 'acpi-misc' and 'acpi-tables'Rafael J. Wysocki7-6/+47
* acpi-pmic: ACPI / PMIC: xpower: Add support for the GPI1 regulator to the OpRegion handler * acpi-misc: ACPI: fix whitespace in pr_fmt() to align log entries * acpi-tables: ACPI: configfs: Unload SSDT on configfs entry removal
2017-07-03Merge branch 'acpica'Rafael J. Wysocki47-376/+1502
* acpica: (53 commits) ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ACPICA: Fix for Device/Thermal objects with ObjectType and DerefOf ACPICA: Comment update: spelling/format. No functional change ACPICA: Update comments, no functional change ACPICA: Split resource descriptor decode strings to a new file ACPICA: Remove extraneous status check ACPICA: Export the public mutex interfaces ACPICA: Disassembler: Abort on an invalid/unknown AML opcode ...
2017-07-03Merge branch 'acpi-pm'Rafael J. Wysocki9-89/+210
* acpi-pm: PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems platform: x86: intel-hid: Wake up the system from suspend-to-idle platform: x86: intel-vbtn: Wake up the system from suspend-to-idle ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle platform/x86: Add driver for ACPI INT0002 Virtual GPIO device PCI / PM: Restore PME Enable if skipping wakeup setup PM / sleep: Print timing information if debug is enabled ACPI / PM: Clean up device wakeup enable/disable code ACPI / PM: Change log level of wakeup-related message USB / PCI / PM: Allow the PCI core to do the resume cleanup ACPI / PM: Run wakeup notify handlers synchronously Conflicts: drivers/base/power/main.c
2017-07-03Merge branch 'uuid-types'Rafael J. Wysocki6-77/+53
Merge 'uuid-types' from git://git.infradead.org/users/hch/uuid.git
2017-07-02acpi/nfit: Issue Start ARS to retrieve existing recordsToshi Kani3-5/+13
ACPI 6.2 defines in section 9.20.7.2 that the OSPM may call a Start ARS with Flags Bit [1] set upon receiving the 0x81 notification. Upon receiving the notification, the OSPM may decide to issue a Start ARS with Flags Bit [1] set to prepare for the retrieval of existing records and issue the Query ARS Status function to retrieve the records. Add support to call a Start ARS from acpi_nfit_uc_error_notify() with ND_ARS_RETURN_PREV_DATA set when HW_ERROR_SCRUB_ON is not set. Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01acpi, nfit: Show bus_dsm_mask in sysfsJerry Hoemann1-0/+12
Display bus_dsm_mask in sysfs as /sys/bus/nd/devices/ndbusX/nfit/dsm_mask. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.Jerry Hoemann1-0/+27
Add a bus level dsm_mask to nvdimm_bus_descriptor to allow the passthru calling mechanism to specify a different mask from the cmd_mask. Populate bus_dsm_mask and use it to filter dsm calls that user can make through the pass thru interface. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> [djbw: use command number constants instead of a magic mask value] Signed-off-by: Dan Williams <dan.j.williams@intel.com>