summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2022-03-31Merge tag 'acpi-5.18-rc1-2' of ↵Linus Torvalds4-36/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are fixes and cleanup on top of the previously merged ACPI material. Specifics: - Avoid out-of-bounds access when parsing _CPC data (Rafael Wysocki) - Change default error code and clean up debug messages in ACPI CPPC probe (Rafael Wysocki) - Replace usage of found with dedicated list iterator variable in the ACPI IPMI driver (Jakob Koschel) - Clean up variable name confusion in APEI (Jakob Koschel) - Make LAPIC_ADDR_OVR address readable in a message parsed during MADT parsing (Vasant Hegde)" * tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: CPPC: Change default error code and clean up debug messages in probe ACPI: CPPC: Avoid out of bounds access when parsing _CPC data ACPI: tables: Make LAPIC_ADDR_OVR address readable in message ACPI: IPMI: replace usage of found with dedicated list iterator variable ACPI, APEI: Use the correct variable for sizeof()
2022-03-31Merge branches 'acpi-ipmi', 'acpi-tables' and 'acpi-apei'Rafael J. Wysocki3-24/+21
Merge IMPI driver changes, ACPI tables parsing code changes and additional APEI changes for v5.18-rc1: - Replace usage of found with dedicated list iterator variable in the ACPI IPMI driver (Jakob Koschel). - Make LAPIC_ADDR_OVR address readable in a message parsed during MADT parsing (Vasant Hegde). - Clean up variable name confusion in APEI (Jakob Koschel). * acpi-ipmi: ACPI: IPMI: replace usage of found with dedicated list iterator variable * acpi-tables: ACPI: tables: Make LAPIC_ADDR_OVR address readable in message * acpi-apei: ACPI, APEI: Use the correct variable for sizeof()
2022-03-30Merge tag 'libnvdimm-for-5.18' of ↵Linus Torvalds2-390/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The update for this cycle includes the deprecation of block-aperture mode and a new perf events interface for the papr_scm nvdimm driver. The perf events approach was acked by PeterZ. - Add perf support for nvdimm events, initially only for 'papr_scm' devices. - Deprecate the 'block aperture' support in libnvdimm, it only ever existed in the specification, not in shipping product" * tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/blk: Fix title level MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER powerpc/papr_scm: Fix build failure when drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set nvdimm/region: Delete nd_blk_region infrastructure ACPI: NFIT: Remove block aperture support nvdimm/namespace: Delete nd_namespace_blk nvdimm/namespace: Delete blk namespace consideration in shared paths nvdimm/blk: Delete the block-aperture window driver nvdimm/region: Fix default alignment for small regions docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu powerpc/papr_scm: Add perf interface support drivers/nvdimm: Add perf interface to expose nvdimm performance stats drivers/nvdimm: Add nvdimm pmu structure
2022-03-26Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - tracepoints when Linux acts as an I2C client - added support for AMD PSP - whole subsystem now uses generic_handle_irq_safe() - piix4 driver gained MMIO access enabling so far missed controllers with AMD chipsets - a bulk of device driver updates, refactorization, and fixes. * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits) i2c: mux: demux-pinctrl: do not deactivate a master that is not active i2c: meson: Fix wrong speed use from probe i2c: add tracepoints for I2C slave events i2c: designware: Remove code duplication i2c: cros-ec-tunnel: Fix syntax errors in comments MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused i2c: mediatek: Add i2c compatible for Mediatek MT8168 dt-bindings: i2c: update bindings for MT8168 SoC i2c: mt65xx: Simplify with clk-bulk i2c: i801: Drop two outdated comments i2c: xiic: Make bus names unique i2c: i801: Add support for the Process Call command i2c: i801: Drop useless masking in i801_access i2c: tegra: Add SMBus block read function i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers i2c: designware: Lock the adapter while setting the suspended flag i2c: mediatek: remove redundant null check i2c: mediatek: modify bus speed calculation formula i2c: designware: Fix improper usage of readl ...
2022-03-25Merge tag 'platform-drivers-x86-v5.18-1' of ↵Linus Torvalds2-0/+45
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "New drivers: - AMD Host System Management Port (HSMP) - Intel Software Defined Silicon Removed drivers (functionality folded into other drivers): - intel_cht_int33fe_microb - surface3_button amd-pmc: - s2idle bug-fixes - Support for AMD Spill to DRAM STB feature hp-wmi: - Fix SW_TABLET_MODE detection method (and other fixes) - Support omen thermal profile policy v1 serial-multi-instantiate: - Add SPI device support - Add support for CS35L41 amplifiers used in new laptops think-lmi: - syfs-class-firmware-attributes Certificate authentication support thinkpad_acpi: - Fixes + quirks - Add platform_profile support on AMD based ThinkPads x86-android-tablets: - Improve Asus ME176C / TF103C support - Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets Lots of various other small fixes and hardware-id additions" * tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits) platform/x86: think-lmi: Certificate authentication support Documentation: syfs-class-firmware-attributes: Lenovo Certificate support platform/x86: amd-pmc: Only report STB errors when STB enabled platform/x86: amd-pmc: Drop CPU QoS workaround platform/x86: amd-pmc: Output error codes in messages platform/x86: amd-pmc: Move to later in the suspend process ACPI / x86: Add support for LPS0 callback handler platform/x86: thinkpad_acpi: consistently check fan_get_status return. platform/x86: hp-wmi: support omen thermal profile policy v1 platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05) platform/x86: amd-pmc: Validate entry into the deepest state on resume platform/x86: thinkpad_acpi: Don't use test_bit on an integer platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable platform/x86: thinkpad_acpi: clean up dytc profile convert platform/x86: x86-android-tablets: Depend on EFI and SPI platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init() platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes ...
2022-03-25ACPI: CPPC: Change default error code and clean up debug messages in probeRafael J. Wysocki1-12/+15
Change the default error code returned by acpi_cppc_processor_probe() from -EFAULT (which is completely inadequate) to -ENODATA and change the debug messages printed by it to contain more information and be more consistent. While at it, format some white space to follow the coding style. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com>
2022-03-25ACPI: CPPC: Avoid out of bounds access when parsing _CPC dataRafael J. Wysocki1-0/+5
If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC") BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com>
2022-03-25ACPI: tables: Make LAPIC_ADDR_OVR address readable in messageVasant Hegde1-2/+2
Without fix: [ 0.005429] ACPI: LAPIC_ADDR_OVR (address[(____ptrval____)]) With fix: [ 0.005429] ACPI: LAPIC_ADDR_OVR (address[0x800fee00000]) Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-25ACPI: IPMI: replace usage of found with dedicated list iterator variableJakob Koschel1-21/+18
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-23Merge tag 'sound-5.18-rc1' of ↵Linus Torvalds1-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been a fairly calm development cycle. There are a few last-minute ALSA core fixes, most notably for covering PCM ioctl races, but the most of rest are device-specific changes. Below are some highlights: ALSA core: - Fixes for PCM ioctl races that may lead to UAF - Fix for oversized allocations in PCM OSS layer ASoC: - Start of moving SoF to support multiple IPC mechanisms - Use of NHLT ACPI table to reduce the amount of quirking required for Intel systems - Preliminary works forthcoming Intel AVS driver for legacy Intel DSP firmwares - Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas RZ/V2L, Texas Instruments TAS585M HD-audio: - Driver re-binding fix for HD-audio - Updates for Intel ADL and Tegra234, various platform quirks for Dell, HP, Lenovo, ASUS, Samsung and Clevo machines USB-audio: - Quirk updates for Scarlett2, RODE, Corsair devices" * tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits) ALSA: hda/realtek: Add alc256-samsung-headphone fixup ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec ALSA: pcm: Add stream lock during PCM reset ioctl operations ALSA: pcm: Fix races among concurrent prealloc proc writes ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls ALSA: pcm: Fix races among concurrent read/write and buffer changes ALSA: pcm: Fix races among concurrent hw_params and hw_free calls ASoC: atmel: mchp-pdmc: print the correct property name MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl ASoC: SOF: Add a new dai_get_clk topology IPC op ASoC: SOF: topology: Add ops for setting up and tearing down pipelines ASoC: SOF: expose sof_route_setup() ASoC: SOF: Add dai_link_fixup PCM op for IPC3 ASoC: SOF: Add trigger PCM op for IPC3 ASoC: SOF: Define hw_params PCM op for IPC3 ASoC: SOF: Introduce IPC3 PCM hw_free op ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function ASoC: SOF: Introduce IPC-specific PCM ops ASoC: SOF: Add bytes_ext control IPC ops for IPC3 ASoC: SOF: Add bytes_get/put control IPC ops for IPC3 ...
2022-03-22ACPI, APEI: Use the correct variable for sizeof()Jakob Koschel1-1/+1
While the original code is valid, it is not the obvious choice for the sizeof() call and in preparation to limit the scope of the list iterator variable the sizeof should be changed to the size of the variable being allocated. Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-21Merge tag 'pm-5.18-rc1' of ↵Linus Torvalds2-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly fixes and cleanups all over the code and a new piece of documentation for Intel uncore frequency scaling. Functionality-wise, the intel_idle driver will support Sapphire Rapids Xeons natively now (with some extra facilities for controlling C-states more precisely on those systems), virtual guests will take the ACPI S4 hardware signature into account by default, the intel_pstate driver will take the defualt EPP value from the firmware, cpupower utility will support the AMD P-state driver added in the previous cycle, and there is a new tracer utility for that driver. Specifics: - Allow device_pm_check_callbacks() to be called from interrupt context without issues (Dmitry Baryshkov). - Modify devm_pm_runtime_enable() to automatically handle pm_runtime_dont_use_autosuspend() at driver exit time (Douglas Anderson). - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui)" * tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits) cpufreq: powernow-k8: Re-order the init checks cpuidle: intel_idle: Drop redundant backslash at line end cpuidle: intel_idle: Update intel_idle() kerneldoc comment PM: hibernate: Honour ACPI hardware signature by default for virtual guests cpufreq: intel_pstate: Use firmware default EPP cpufreq: unify show() and store() naming and use __ATTR_XX PM: core: keep irq flags in device_pm_check_callbacks() cpuidle: haltpoll: Call cpuidle_poll_state_init() later Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module PM: sleep: Add device name to suspend_report_result() turbostat: fix PC6 displaying on some systems intel_idle: add core C6 optimization for SPR intel_idle: add 'preferred_cstates' module argument intel_idle: add SPR support PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend() ACPI: processor idle: Check for architectural support for LPI cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function ...
2022-03-18Merge branches 'pm-sleep', 'pm-domains' and 'pm-docs'Rafael J. Wysocki1-8/+3
Merge changes related to system sleep, PM domains changes and power management documentation changes for 5.18-rc1: - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). * pm-sleep: PM: hibernate: Honour ACPI hardware signature by default for virtual guests PM: sleep: Add device name to suspend_report_result() PM: suspend: fix return value of __setup handler PM: hibernate: fix __setup handler error handling PM: hibernate: Clean up non-kernel-doc comments PM: sleep: wakeup: Fix typos in comments PM: hibernate: fix load_image_and_restore() error path * pm-domains: PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove() PM: domains: use dev_err_probe() to simplify error handling PM: domains: Prevent power off for parent unless child is in deepest state * pm-docs: Documentation: admin-guide: pm: Document uncore frequency scaling
2022-03-18Merge branches 'acpi-soc', 'acpi-video' and 'acpi-apei'Rafael J. Wysocki12-27/+250
Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI changes for 5.18-rc1: - Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know the exact type of the controller (Andy Shevchenko). - Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner Sembach). - Fix return value of __setup handlers in the APEI code (Randy Dunlap). - Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka Koskinen). - Limit printable size of BERT table data (Darren Hart). - Fix up HEST and GHES initialization (Shuai Xue). * acpi-soc: ACPI: LPSS: Provide an SSP type to the driver ACPI: LPSS: Constify properties member in struct lpss_device_desc ACPI: platform: Constify properties parameter in acpi_create_platform_device() * acpi-video: ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU * acpi-apei: ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device ACPI/APEI: Limit printable size of BERT table data ACPI: APEI: fix return value of __setup handlers ACPI: APEI: rename ghes_init() with an "acpi_" prefix ACPI: APEI: explicit init of HEST and GHES in apci_init()
2022-03-18Merge branches 'acpi-ec', 'acpi-cppc', 'acpi-fan' and 'acpi-battery'Rafael J. Wysocki7-161/+330
Merge ACPI EC driver changes, CPPC-related changes, ACPI fan driver changes and ACPI battery driver changes for 5.18-rc1: - Make wakeup events checks in the ACPI EC driver more straightforward and clean up acpi_ec_submit_event() (Rafael Wysocki). - Make it possible to obtain the CPU capacity with the help of CPPC information (Ionela Voinescu). - Improve fine grained fan control in the ACPI fan driver and document it (Srinivas Pandruvada). - Add device HID and quirk for Microsoft Surface Go 3 to the ACPI battery driver (Maximilian Luz). * acpi-ec: ACPI: EC: Rearrange code in acpi_ec_submit_event() ACPI: EC: Reduce indentation level in acpi_ec_submit_event() ACPI: EC: Do not return result from advance_transaction() * acpi-cppc: arm64, topology: enable use of init_cpu_capacity_cppc() arch_topology: obtain cpu capacity using information from CPPC x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc() * acpi-fan: Documentation/admin-guide/acpi: Add documentation for fine grain control ACPI: fan: Add additional attributes for fine grain control ACPI: fan: Properly handle fine grain control ACPI: fan: Optimize struct acpi_fan_fif ACPI: fan: Separate file for attributes creation ACPI: fan: Fix error reporting to user space * acpi-battery: ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
2022-03-18Merge branches 'acpi-pm', 'acpi-properties', 'acpi-misc' and 'acpi-x86'Rafael J. Wysocki6-16/+45
Merge ACPI power management changes, ACPI device properties handling changes, x86-specific ACPI changes and miscellaneous ACPI changes for 5.18-rc1: - Add power management debug messages related to suspend-to-idle in two places (Rafael Wysocki). - Fix __acpi_node_get_property_reference() return value and clean up that function (Andy Shevchenko, Sakari Ailus). - Fix return value of the __setup handler in the ACPI PM timer clock source driver (Randy Dunlap). - Clean up double words in two comments (Tom Rix). - Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and Nextbook Ares 8 (Hans de Goede). - Clean up frequency invariance handling on x86 in the ACPI CPPC library (Huang Rui). - Work around broken XSDT on the Advantech DAC-BJ01 board (Mark Cilissen). * acpi-pm: ACPI: EC / PM: Print additional debug message in acpi_ec_dispatch_gpe() ACPI: PM: Print additional debug message in acpi_s2idle_wake() * acpi-properties: ACPI: property: Get rid of redundant 'else' ACPI: properties: Consistently return -ENOENT if there are no more references * acpi-misc: clocksource: acpi_pm: fix return value of __setup handler ACPI: clean up double words in two comments * acpi-x86: ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC x86: Expose init_freq_invariance() to topology header x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
2022-03-18Merge branches 'acpica', 'acpi-osl', 'acpi-bus' and 'acpi-tables'Rafael J. Wysocki5-18/+51
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC support changes and ACPI tables parsing changes for 5.18-rc1: - Use uintptr_t and offsetof() in the ACPICA code to avoid compiler warnings regarding NULL pointer arithmetic (Rafael Wysocki). - Fix possible NULL pointer dereference in acpi_ns_walk_namespace() when passed "acpi=off" in the command line (Rafael Wysocki). - Fix and clean up acpi_os_read/write_port() (Rafael Wysocki). - Introduce acpi_bus_for_each_dev() and use it for walking all ACPI device objects in the Type C code (Rafael Wysocki). - Fix the _OSC platform capabilities negotioation and prevent CPPC from being used if the platform firmware indicates that it not supported via _OSC (Rafael Wysocki). - Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka Koskinen, Robert Kiraly). * acpica: ACPICA: Avoid walking the ACPI Namespace if it is not there ACPICA: Use uintptr_t and offsetof() in Linux kernel builds * acpi-osl: ACPI: OSL: Fix and clean up acpi_os_read/write_port() * acpi-bus: ACPI: bus: Avoid using CPPC if not supported by firmware Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag" ACPI: bus: Introduce acpi_bus_for_each_dev() * acpi-tables: ACPI: tables: Add AGDI to the list of known table signatures ACPI: tables: Add CEDT signature to the list of known tables
2022-03-18Merge back ACPI device enumeration material for v5.18.Rafael J. Wysocki2-4/+3
2022-03-17ACPI / x86: Add support for LPS0 callback handlerMario Limonciello1-0/+40
Currenty the latest thing run during a suspend to idle attempt is the LPS0 `prepare_late` callback and the earliest thing is the `resume_early` callback. There is a desire for the `amd-pmc` driver to suspend later in the suspend process (ideally the very last thing), so create a callback that it or any other driver can hook into to do this. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-03-17ACPI: bus: Avoid using CPPC if not supported by firmwareRafael J. Wysocki2-0/+11
If the platform firmware indicates that it does not support CPPC by clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the platform _OSC capabilities mask, avoid attempting to evaluate _CPC which may fail in that case. Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only added to the supported platform capabilities mask on x86, when X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless in the other cases. Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-03-17Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query ↵Rafael J. Wysocki1-8/+19
flag" Revert commit 159d8c274fd9 ("ACPI: Pass the same capabilities to the _OSC regardless of the query flag") which caused legitimate usage scenarios (when the platform firmware does not want the OS to control certain platform features controlled by the system bus scope _OSC) to break and was misguided by some misleading language in the _OSC definition in the ACPI specification (in particular, Section 6.2.11.1.3 "Sequence of _OSC Calls" that contradicts other perts of the _OSC definition). Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com Reported-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-03-17ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNUWerner Sembach1-0/+75
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working native and video interface. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16PM: hibernate: Honour ACPI hardware signature by default for virtual guestsDavid Woodhouse1-8/+3
The ACPI specification says that OSPM should refuse to restore from hibernate if the hardware signature changes, and should boot from scratch. However, real BIOSes often vary the hardware signature in cases where we *do* want to resume from hibernate, so Linux doesn't follow the spec by default. However, in a virtual environment there's no reason for the VMM to vary the hardware signature *unless* it wants to trigger a clean reboot as defined by the ACPI spec. So enable the check by default if a hypervisor is detected. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"Rafael J. Wysocki1-5/+5
Revert commit e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID if _HID is not valid"), because it has introduced regressions on multiple systems, even though it only has effect on clearly invalid firmware. Reported-by: Pierre-Louis Bossart <notifications@github.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-11nvdimm/region: Delete nd_blk_region infrastructureDan Williams1-8/+3
Now that the nd_namespace_blk infrastructure is removed, delete all the region machinery to coordinate provisioning aliased capacity between PMEM and BLK. Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/164688418803.2879318.1302315202397235855.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-03-11ACPI: NFIT: Remove block aperture supportDan Williams2-382/+0
Delete the code to parse interleave-descriptor-tables and coordinate I/O through a BLK aperture. Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/164688418240.2879318.400185926874596938.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-03-10x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()Ionela Voinescu1-3/+3
init_freq_invariance_cppc() was called in acpi_cppc_processor_probe(), after CPU performance information and controls were populated from the per-cpu _CPC objects. But these _CPC objects provide information that helps with both CPU (u-arch) and frequency invariance. Therefore, change the function name to a more generic one, while adding the arch_ prefix, as this function is expected to be defined differently by different architectures. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset deviceIlkka Koskinen4-0/+129
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to issue diagnostic dump and reset via an SDEI event or an interrupt. This patch implements SDEI path. [0] https://developer.arm.com/documentation/den0093/latest/ Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10ACPI: tables: Add AGDI to the list of known table signaturesIlkka Koskinen1-1/+1
Add AGDI to the list of known ACPI table signatures to allow the kernel to recognize it when upgrading tables via initrd. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-09ACPI/APEI: Limit printable size of BERT table dataDarren Hart1-2/+6
Platforms with large BERT table data can trigger soft lockup errors while attempting to print the entire BERT table data to the console at boot: watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1] Observed on Ampere Altra systems with a single BERT record of ~250KB. The original bert driver appears to have assumed relatively small table data. Since it is impractical to reassemble large table data from interwoven console messages, and the table data is available in /sys/firmware/acpi/tables/data/BERT limit the size for tables printed to the console to 1024 (for no reason other than it seemed like a good place to kick off the discussion, would appreciate feedback from existing users in terms of what size would maintain their current usage model). Alternatively, we could make printing a CONFIG option, use the bert_disable boot arg (or something similar), or use a debug log level. However, all those solutions require extra steps or change the existing behavior for small table data. Limiting the size preserves existing behavior on existing platforms with small table data, and eliminates the soft lockups for platforms with large table data, while still making it available. Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-08ACPI: APEI: fix return value of __setup handlersRandy Dunlap3-3/+3
__setup() handlers should return 1 to indicate that the boot option has been handled. Returning 0 causes a boot option to be listed in the Unknown kernel command line parameters and also added to init's arg list (if no '=' sign) or environment list (if of the form 'a=b'). Unknown kernel command line parameters "erst_disable bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init erst_disable bert_disable hest_disable with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-08ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/LHans de Goede1-0/+12
The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts (the Android x86 kernel fork ignores I2C devices described in the DSDT). Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-08ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8Hans de Goede1-0/+9
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts (the Android x86 kernel fork ignores I2C devices described in the DSDT). Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-07ACPICA: Avoid walking the ACPI Namespace if it is not thereRafael J. Wysocki1-0/+3
ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL. For instance, this can happen if the kernel is run with "acpi=off" in the command line. Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/ Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-03ACPI: APEI: rename ghes_init() with an "acpi_" prefixShuai Xue2-2/+2
ghes_init() sticks out in acpi_init() because it is the only functions without an "acpi_" prefix. Rename ghes_init with an "acpi_" prefix, then all looks fine. Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-03ACPI: APEI: explicit init of HEST and GHES in apci_init()Shuai Xue3-14/+10
From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage the estatus memory pool. On the other hand, ghes_init() relies on sdei_init() to detect the SDEI version and (un)register events. The dependencies are as follows: ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init() ghes_init() => sdei_init() HEST is not PCI-specific and initcall ordering is implicit and not well-defined within a level. Based on above, remove acpi_hest_init() from acpi_pci_root_init() and convert ghes_init() and sdei_init() from initcalls to explicit calls in the following order: acpi_hest_init() ghes_init() sdei_init() Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-03ACPI: processor idle: Check for architectural support for LPIMario Limonciello1-5/+10
When `osc_pc_lpi_support_confirmed` is set through `_OSC` and `_LPI` is populated then the cpuidle driver assumes that LPI is fully functional. However currently the kernel only provides architectural support for LPI on ARM. This leads to high power consumption on X86 platforms that otherwise try to enable LPI. So probe whether or not LPI support is implemented before enabling LPI in the kernel. This is done by overloading `acpi_processor_ffh_lpi_probe` to check whether it returns `-EOPNOTSUPP`. It also means that all future implementations of `acpi_processor_ffh_lpi_probe` will need to follow these semantics as well. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-02ACPI: bus: Introduce acpi_bus_for_each_dev()Rafael J. Wysocki1-1/+6
In order to avoid exposing acpi_bus_type to modules, introduce an acpi_bus_for_each_dev() helper for iterating over all ACPI device objects and make typec_link_ports() use it instead of the raw bus_for_each_dev() along with acpi_bus_type. Having done that, drop the acpi_bus_type export. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
2022-03-02Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttonsHans de Goede1-0/+5
The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy of the soc_button_array code. The only big difference is that it binds to an i2c_client rather then to a platform_device. The cause of this is the ACPI resources for the MSHW0028 device containing a bogus I2cSerialBusV2 resource which causes the kernel to instantiate an i2c_client for it instead of a platform_device. Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c, so that a platform_device will be instantiated and add support for the MSHW0028 HID to soc_button_array. This fully replaces surface3_button, which will be removed in a separate commit (since it binds to the now no longer created i2c_client it no longer does anyyhing after this commit). Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on both the Surface 3 and the Surface 3 Pro and the actual API/implementation for the Surface 3 Pro is quite different. The changes in this commit should not impact the separate surfacepro3_button driver: 1. Because of the bogus I2cSerialBusV2 resource problem that driver binds to the acpi_device itself, so instantiating a platform_device instead of an i2c_client does not matter. 2. The soc_button_array driver will not bind to the MSHW0028 device on the Surface 3 Pro, because it has no GPIO resources. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220224110241.9613-2-hdegoede@redhat.com
2022-03-01ACPI: LPSS: Provide an SSP type to the driverAndy Shevchenko1-6/+25
The SPI driver wants to know the exact type of the controller. Provide this information to it, hence allow to fix Intel Wildcat Point case in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01ACPI: LPSS: Constify properties member in struct lpss_device_descAndy Shevchenko1-1/+1
The properties are static and not supposed to be modified, constify them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01ACPI: platform: Constify properties parameter in acpi_create_platform_device()Andy Shevchenko1-1/+1
Properties are not and should not be changed in the callee, hence constify properties parameter in acpi_create_platform_device(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3Maximilian Luz1-0/+12
For some reason, the Microsoft Surface Go 3 uses the standard ACPI interface for battery information, but does not use the standard PNP0C0A HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver as this seems to work well. Additionally, the power state is not updated immediately after the AC has been (un-)plugged, so add the respective quirk for that. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: fan: Add additional attributes for fine grain controlSrinivas Pandruvada3-3/+57
Add additional attributes, which helps in implementing algorithm in the user space to optimize fan control. These attributes are presented in the same directory as the existing performance state attributes. Additional attributes: 1. Support of fine grain control Publish support of presence of fine grain control so that fan speed can be tuned correctly. This attribute is called "fine_grain_control". 2. fan speed Publish the actual fan rpm in sysfs. Knowing fan rpm is helpful to reduce noise level and use passive control instead. Also fan performance may not be same over time, so the same control value may not be enough to run the fan at a speed. So a feedback value of speed is helpful. This sysfs attribute is called "fan_speed_rpm". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: fan: Properly handle fine grain controlSrinivas Pandruvada2-26/+74
When _FIF object specifies support for fine grain control, then fan speed can be set from 0 to 100% with the recommended minimum "step size" via _FSL object. Here the control value doesn't need to match any value from _FPS object. Currently we have a simple solution implemented which just pick maximum control value from _FPS to display the actual state, but this is not optimal when there is a big window between two control values in _FPS. Also there is no way to set to any speed which doesn't match control values in _FPS. The system firmware can start the fan at speed which doesn't match any control value. To support fine grain control (when supported) via thermal sysfs: - cooling device max state is not _FPS state count but it will be 100 / _FIF.step_size Step size can be from 1 to 9. - cooling device current state is _FST.control / _FIF.step_size - cooling device set state will set the control value cdev.curr_state * _FIF.step_size plus any adjustment for 100%. By the spec, when control value do not sum to 100% because of _FIF.step_size, OSPM may select an appropriate ending Level increment to reach 100%. There is no rounding during calculation. For example if step size is 6: thermal sysfs cooling device max_state = 100/6 = 16 So user can set any value from 0-16. If the system boots with a _FST.control which is not multiples of step_size, the thermal sysfs cur_state will be based on the range. For example for step size = 6: _FST.control thermal sysfs cur_state ------------------------------------------------ 0-5 0 6-11 1 .. .. 90-95 15 96-100 16 While setting the _FST.control, the compensation will be at the last step for cur_state = 16, which will set the _FST.control to 100. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: fan: Optimize struct acpi_fan_fifSrinivas Pandruvada2-5/+11
We don't need u64 to store the information about _FIF. There are two booleans (fine_grain_ctrl and low_speed_notification) and one field step_size which can take value from 1-9. There are no internal users of revision field. So convert all fields to u8, by not directly extracting the _FIF info the struct. Use an intermediate buffer to extract and assign. This will help to do u32 math using these fields. No functional changes are expected. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: fan: Separate file for attributes creationSrinivas Pandruvada4-89/+133
Move the functionality of creation of sysfs attributes under acpi device to a new file fan_attr.c. This cleans up the core fan code, which just use thermal sysfs interface. The original fan.c is renamed to fan_core.c. No functional changes are expected. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-25ACPI: fan: Fix error reporting to user spaceSrinivas Pandruvada1-2/+2
When user get/set cur_state fails, it should be some negative error value instead of whatever returned by acpi_evaluate_object() or from acpi_execute_simple_method(). The return value from these apis is some positive values greater than 0. For example if AE_NOT_FOUND is returned it will be "5". In other ACPI drivers, -ENODEV is returned when ACPI_FAILURE(status) is true. Do the same thing here for thermal sysfs callbacks for get and set for failures. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-23Merge tag 'irq-api-2022-02-21' of ↵Wolfram Sang7-22/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into i2c/for-mergewindow Provide a tag for maintainers to pull the generic_handle_irq_safe() API.
2022-02-21ACPI: clean up double words in two commentsTom Rix2-2/+2
Remove the second 'on' and 'those'. Signed-off-by: Tom Rix <trix@redhat.com> [ rjw: Subject adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>