| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
"The main changes are:
- Persistent CPU/node numbering across CPU hotplug/unplug events.
This is a pretty involved series of changes that first fetches all
the information during bootup and then uses it for the various
hotplug/unplug methods. (Gu Zheng, Dou Liyang)
- IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)
- ... various fixes, cleanups and enhancements"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
acpi: Fix broken error check in map_processor()
acpi: Validate processor id when mapping the processor
acpi: Provide mechanism to validate processors in the ACPI tables
x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
x86/acpi: Enable MADT APIs to return disabled apicids
x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
x86/acpi: Enable acpi to register all possible cpus at boot time
x86/numa: Online memory-less nodes at boot time
x86/apic: Get rid of apic_version[] array
x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
x86/ioapic: Ignore root bridges without a companion ACPI device
x86/apic: Update comment about disabling processor focus
x86/smpboot: Check APIC ID before setting up default routing
x86/ioapic: Fix IOAPIC failing to request resource
x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
x86/ioapic: Fix setup_res() failing to get resource
x86/ioapic: Support hot-removal of IOAPICs present during boot
x86/ioapic: Change prototype of acpi_ioapic_add()
x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"First off, the ACPICA code in the kernel is updated to upstream
revision 20160831 that brings in a few bug fixes and cleanups. In
particular, it is possible to mask GPEs now (and the sysfs interface
for GPE control is fixed on top of that), problems related to the
table loading mechanism are fixed and all code related to FADT version
2 (which has never been part of the ACPI specification) is dropped.
On the new features front, there is a new watchdog driver based on the
ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
replace the iTCO watchdog that doesn't work there, and some UART
devices get new definitions of built-in properties (to be accessed via
the generic device properties API).
Also, included is a fix for an ACPI-related PCI resorces allocation
issue and a few problems in the EC driver and in the button and
battery drivers are fixed.
In addition to that, the ACPI CPPC library is updated to make batching
of requests sent over the PCC channel possible (which reduces the PCC
usage overhead substantially in some cases) and to support functional
fixed hardware (FFH) type of CPPC registers access (which will allow
CPPC to be used on x86 too in the future).
As usual, there are some assorted fixes and cleanups too.
Specifics:
- Update of the ACPICA code in the kernel to upstream revision
20160831 with the following major changes:
* New mechanism for GPE masking.
* Fixes for issues related to the LoadTable operator and table
loading.
* Fixes for issues related to so-called module-level code (MLC),
that is AML that doesn't belong to any methods.
* Change of the return value of the _OSI method to reflect the
Windows behavior.
* GAS (Generic Address Structure) support fix related to 32-bit
FADT addresses.
* Elimination of unnecessary FADT version 2 support.
* ACPI tools fixes and cleanups.
From Bob Moore, Lv Zheng, and Jung-uk Kim.
- ACPI sysfs interface updates to fix GPE handling (on top of the new
GPE masking mechanism in ACPICA) and issues related to table
loading (Lv Zheng).
- New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
Table), needed on some platforms to replace the iTCO watchdog that
doesn't work there and related updates of the intel_pmc_ipc,
i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).
- Driver core fix to prevent it from leaking secondary fwnode objects
during device removal (Lukas Wunner).
- New definitions of built-in properties for UART in ACPI-based x86
SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
(Heikki Krogerus).
- New device ID for the Vulcan SPI controller and constification of
local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
Julia Lawall).
- Fix for a bug causing the allocation of PCI resorces to fail if
ACPI-enumerated child platform devices are registered below the PCI
devices in question (Mika Westerberg).
- Change of the default polarity for PCI legacy IRQs to high on
systems booting wth ACPI on platforms with a GIC interrupt
controller model fixing the discrepancy between the specification
and HW behavior (Lorenzo Pieralisi).
- Fixes for the handling of system suspend/resume in the ACPI EC
driver and update of that driver to make it cope with the cases
when the EC device defined in the ECDT has to be used throughout
the entire system life cycle (Lv Zheng).
- Update of the ACPI CPPC library to allow it to batch requests sent
over the PCC channel (to reduce overhead), to support the fixed
functional hardware (FFH) CPPC registers access type, to notify the
mailbox framework about TX completions when the interrupt flag is
set for the PCC mailbox, and to support HW-Reduced Communication
Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
Pandruvada, Hoan Tran).
- ACPI button driver fix and documentation update related to the
handling of laptop lids (Lv Zheng).
- ACPI battery driver initialization fix (Carlos Garnacho).
- ACPI GPIO enumeration documentation update (Mika Westerberg).
- Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
Zheng).
- Assorted cleanups of the ACPI table parsing code and the
x86-specific ACPI code (Al Stone).
- Fixes for assorted ACPI-related issues found in linux-next (Wei
Yongjun)"
* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
ACPI / documentation: Use recommended name in GPIO property names
watchdog: wdat_wdt: Fix warning for using 0 as NULL
watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
i2c: i801: Do not create iTCO watchdog when WDAT table exists
mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
ACPICA: Parser: Fix a regression in LoadTable support
ACPICA: Tables: Fix "UNLOAD" code path lock issues
ACPI / watchdog: Add support for WDAT hardware watchdog
ACPI / platform: Pay attention to parent device's resources
PCI: Add pci_find_resource()
ACPI / CPPC: Support PCC with interrupt flag
ACPI / sysfs: Update sysfs signature handling code
ACPI / sysfs: Fix an issue for LoadTable opcode
ACPICA: Tables: Fix a regression in acpi_tb_find_table()
ACPI / tables: Remove duplicated include from tables.c
ACPI / APD: constify local structures
x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
x86: ACPI: remove extraneous white space after semicolon
...
|
|
* acpi-button:
ACPI / button: Add document for ACPI control method lid device restrictions
ACPI / button: Fix an issue in button.lid_init_state=ignore mode
* acpi-battery:
ACPI / battery: Add sysfs representation after checking _BST
* acpi-doc:
ACPI / documentation: Use recommended name in GPIO property names
|
|
* acpi-wdat:
watchdog: wdat_wdt: Fix warning for using 0 as NULL
watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
i2c: i801: Do not create iTCO watchdog when WDAT table exists
mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
ACPI / watchdog: Add support for WDAT hardware watchdog
* acpi-ec:
ACPI / EC: Fix issues related to boot_ec
ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
ACPI / EC: Cleanup first_ec/boot_ec code
ACPI / EC: Enable event freeze mode to improve event handling for suspend process
ACPI / EC: Add PM operations to improve event handling for suspend process
ACPI / EC: Add PM operations to improve event handling for resume process
ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
ACPI / EC: Add PM operations for suspend/resume noirq stage
|
|
* acpi-x86:
x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
x86: ACPI: remove extraneous white space after semicolon
* acpi-cppc:
ACPI / CPPC: Support PCC with interrupt flag
ACPI / CPPC: Add prefix cppc to cpudata structure name
ACPI / CPPC: Add support for functional fixed hardware address
ACPI / CPPC: Don't return on CPPC probe failure
ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config
ACPI / CPPC: check for error bit in PCC status field
ACPI / CPPC: move all PCC related information into pcc_data
ACPI / CPPC: add sysfs support to compute delivered performance
ACPI / CPPC: set a non-zero value for transition_latency
ACPI / CPPC: support for batching CPPC requests
ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace
ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops
mailbox: pcc: Support HW-Reduced Communication Subspace type 2
* acpi-soc:
ACPI / APD: constify local structures
ACPI / APD: Add device HID for Vulcan SPI controller
|
|
* acpi-bus:
ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
ACPI / bus: Make acpi_get_first_physical_node() public
|
|
* acpi-sysfs:
ACPI / sysfs: Update sysfs signature handling code
ACPI / sysfs: Fix an issue for LoadTable opcode
ACPI / sysfs: Use new GPE masking mechanism in GPE interface
* acpi-pci:
ACPI / platform: Pay attention to parent device's resources
PCI: Add pci_find_resource()
ACPI / PCI: fix GIC irq model default PCI IRQ polarity
* acpi-tables:
ACPI / tables: Remove duplicated include from tables.c
ACPI / tables: do not report the number of entries ignored by acpi_parse_entries()
ACPI / tables: fix acpi_parse_entries_array() so it traverses all subtables
ACPI / tables: fix incorrect counts returned by acpi_parse_entries_array()
|
|
* acpica: (45 commits)
ACPICA: Parser: Fix a regression in LoadTable support
ACPICA: Tables: Fix "UNLOAD" code path lock issues
ACPICA: Tables: Fix a regression in acpi_tb_find_table()
ACPICA: Update version to 20160831
ACPICA: Tables: Tune table mutex to be a leaf lock
ACPICA: Dispatcher: Fix a mutex issue for method auto serialization
ACPICA: Namespace: Fix dynamic table loading issues
ACPICA: Namespace: Add acpi_ns_get_node_unlocked()
ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading
ACPICA: Update return value for intenal _OSI method
ACPICA: Tables: Override all 64-bit GAS fields when acpi_gbl_use32_bit_fadt_addresses is TRUE
ACPICA: Tables: Add new table events indicating table installation/uninstallation
ACPICA: Tables: Remove wrong table event macros
ACPICA: Tables: Remove acpi_tb_install_fixed_table()
ACPICA: Add a couple of casts to uthex.c
ACPICA: Cleanup for all string-to-integer conversions
ACPICA: Debugger: Add subcommand for predefined name execution
ACPICA: Update version to 20160729
ACPICA: OSL: Fix a regression that old GCC requires a workaround for strchr()
ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers
...
|
|
* device-properties:
serial: 8250_dw: Add quirk for APM X-Gene SoC
ACPI / LPSS: Provide build-in properties of the UART
ACPI / APD: Provide build-in properties of the UART
driver core: Don't leak secondary fwnode on device removal
|
|
Bring in the upstream modifications so we can fixup the silent merge
conflict which is introduced by this merge.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This patch enables the following initialization order for the
new table loading mode (which is enabled by setting
acpi_gbl_parse_table_as_term_list to TRUE):
1. Install default region handlers (SystemMemory, SystemIo, PciConfig,
EmbeddedControl via ECDT) without evaluating _REG;
2. Load the table and execute the module level AML opcodes instantly.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
ACPICA commit a78506e0ce8ab1d20db2a055d99cf9143e89eb29
LoadTable allows an alternative RootPathString than the default "\", while
the new table execution support fails to keep this logic.
This regression can be detected by ASLTS - TLT0.tst4, this patch fixes this
regression.
Linux upstream is not affected by this regression as we haven't enabled the
new table execution support there. BZ 1326, Lv Zheng.
Link: https://github.com/acpica/acpica/commit/a78506e0
Link: https://bugs.acpica.org/show_bug.cgi?id=1326
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 39227380f5b99c51b897a3ffedd88508aa26789b
The previous lock fixes didn't cover "Unload" opcode and table unload APIs,
this patch fixes lock issues in the "Unload" code path. BZ 1325, Lv Zheng.
Link: https://github.com/acpica/acpica/commit/39227380
Link: https://bugs.acpica.org/show_bug.cgi?id=1325
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Starting from Intel Skylake the iTCO watchdog timer registers were moved to
reside in the same register space with SMBus host controller. Not all
needed registers are available though and we need to unhide P2SB (Primary
to Sideband) device briefly to be able to read status of required NO_REBOOT
bit. The i2c-i801.c SMBus driver used to handle this and creation of the
iTCO watchdog platform device.
Windows, on the other hand, does not use the iTCO watchdog hardware
directly even if it is available. Instead it relies on ACPI Watchdog Action
Table (WDAT) table to describe the watchdog hardware to the OS. This table
contains necessary information about the the hardware and also set of
actions which are executed by a driver as needed.
This patch implements a new watchdog driver that takes advantage of the
ACPI WDAT table. We split the functionality into two parts: first part
enumerates the WDAT table and if found, populates resources and creates
platform device for the actual driver. The second part is the driver
itself.
The reason for the split is that this way we can make the driver itself to
be a module and loaded automatically if the WDAT table is found. Otherwise
the module is not loaded.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
map_processor() checks the cpuid value returned by acpi_map_cpuid() for -1
but acpi_map_cpuid() returns -EINVAL in case of error.
As a consequence the error is ignored and the following access into percpu
data with that negative cpuid results in a boot crash.
This happens always when NR_CPUS/nr_cpu_ids is smaller than the number of
processors listed in the ACPI tables.
Use a proper error check for id < 0 so the function returns instead of
trying to map CPU#(-EINVAL).
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Cc: akpm@linux-foundation.org
Cc: chen.tang@easystack.cn
Cc: cl@linux.com
Cc: gongzhaogang@inspur.com
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: len.brown@intel.com
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: mika.j.penttila@gmail.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: tj@kernel.org
Cc: yasu.isimatu@gmail.com
Fixes: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609231705570.5640@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When we want to identify whether the proc_id is unreasonable or not, we
can call the "acpi_processor_validate_proc_id" function. It will search
in the duplicate IDs. If we find the proc_id in the IDs, we return true
to the call function. Conversely, the false represents available.
When we establish all possible cpuid <-> nodeid mapping to handle the
cpu hotplugs, we will use the proc_id from ACPI table.
We do validation when we get the proc_id. If the result is true, we
will stop the mapping.
[ tglx: Mark the new function __init ]
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-8-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
[Problem]
When we set cpuid <-> nodeid mapping to be persistent, it will use the DSDT
As we know, the ACPI tables are just like user's input in that respect, and
we don't crash if user's input is unreasonable.
Such as, the mapping of the proc_id and pxm in some machine's ACPI table is
like this:
proc_id | pxm
--------------------
0 <-> 0
1 <-> 0
2 <-> 1
3 <-> 1
89 <-> 0
89 <-> 0
89 <-> 0
89 <-> 1
89 <-> 1
89 <-> 2
89 <-> 3
.....
We can't be sure which one is correct to the proc_id 89. We may map a wrong
node to a cpu. When pages are allocated, this may cause a kernal panic.
So, we should provide mechanisms to validate the ACPI tables, just like we
do validation to check user's input in web project.
The mechanism is that the processor objects which have the duplicate IDs
are not valid.
[Solution]
We add a validation function, like this:
foreach Processor in DSDT
proc_id = get_ACPI_Processor_number(Processor)
if (proc_id exists )
mark both of them as being unreasonable;
The function will record the unique or duplicate processor IDs.
The duplicate processor IDs such as 89 are regarded as the unreasonable IDs
which mean that the processor objects in question are not valid.
[ tglx: Add __init[data] annotations ]
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-7-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.
This patch finishes step 4.
This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled
processors at boot time via an additional acpi namespace walk for processors.
[ tglx: Remove the unneeded exports ]
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-6-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.
This patch finishes step 3.
There are four mappings in the kernel:
1. nodeid (logical node id) <-> pxm (persistent)
2. apicid (physical cpu id) <-> nodeid (persistent)
3. cpuid (logical cpu id) <-> apicid (not persistent, now persistent by step 2)
4. cpuid (logical cpu id) <-> nodeid (not persistent)
So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs,
we should:
1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2.
2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should
obtain all apicids from MADT.
All processors' apicids can be obtained by _MAT method or from MADT in ACPI.
The current code ignores disabled processors and returns -ENODEV.
After this patch, a new parameter will be added to MADT APIs so that caller
is able to control if disabled processors are ignored.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-5-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
For the DSMs where the kernel knows the format of the output buffer and
originates those DSMs from within the kernel, return -EIO for any
non-zero status. If the BIOS is indicating a status that we do not know
how to handle, fail the DSM.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Given following simplified device hierarchy:
// PCI device having BAR0 (RMEM) split between 4 GPIO devices.
Device (P2S)
{
Name (_ADR, 0x000d0000)
Device (GPO0)
{
Name (_HID, "INT3452")
Name (_UID, 1)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x0000)
})
}
Device (GPO1)
{
Name (_HID, "INT3452")
Name (_UID, 2)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x4000)
})
}
Device (GPO2)
{
Name (_HID, "INT3452")
Name (_UID, 3)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x8000)
})
}
Device (GPO3)
{
Name (_HID, "INT3452")
Name (_UID, 4)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0xc000)
})
}
}
The current ACPI platform enumeration code allocates resources from the
global MMIO resource pool (/proc/iomem) for all the four GPIO devices.
After this PCI core calls pcibios_resource_survey() to allocate resources
for all PCI devices including the parent device for these GPIO devices
(P2S). Since that resource range has already been reserved the allocation
fails.
The reason for this is that we never bother with parent device's resources
when ACPI platform devices are created.
Fix this by checking whether there is a parent device and in that case make
sure we assign correct parent resource to the resources for the child ACPI
platform device. Currently we only deal with parent devices if they are PCI
devices but we may expand this later to cover other bus types as well.
Reported-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For PCC mailbox with interrupt flag, CPPC should call mbox_chan_txdone()
function to notify the mailbox framework about TX completion.
Signed-off-by: Hoan Tran <hotran@apm.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch cleans up sysfs table signature handling code:
1. Convert the signature handling code to use the ACPICA APIs to
benefit from the future improvements of the APIs.
2. Add 'filename' attribute in order to handle both BE/LE name tags.
3. Add instance check in order to avoid the possible buffer overflow
related to the table file name.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
OEM tables can be installed via RSDT/XSDT, in this case, they have already
been created under /sys/firmware/acpi/tables.
For this kind of tables, normally LoadTable opcode will be executed to load
them. If LoadTable opcode is executed after acpi_sysfs_init(),
acpi_sysfs_table_handler() will be invoked, thus a redundant table file
will be created under /sys/firmware/acpi/tables/dynamic. Then running
"acpidump" on such platform results in an error, complaining blank empty
table (see Link 1 below).
The bug can be reproduced by customizing an OEM1 table, allowing it to be
overridden via 'table_sigs' (drivers/acpi/tables.c), adding the following
code to the customized DSDT to load it:
Name (OEMH, Zero)
Name (OEMF, One)
If (LEqual (OEMF, One)) {
Store (LoadTable ("OEM1", "Intel", "Test"), OEMH)
Store (Zero, OEMF)
}
In order to make sure that the OEM1 table is installed after
acpi_sysfs_init(), acpi_sysfs_init() can be moved before invoking
acpi_load_tables(). Then the following command execution result can be
seen:
# acpidump > acpidump.txt
Could not read table header: /sysfs/firmware/acpi/tables/dynamic/OEM12
Could not get ACPI table at index 17, AE_BAD_HEADER
Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1]
Link: https://github.com/acpica/acpica/commit/ed6a5fbc
Reported-by: Jason Voelz <jason.voelz@intel.com>
Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
In the following commit, the return value of acpi_tb_find_table() is
incorrect:
commit ac0f06ebb815dabe42f2b2886ee9f879a2170ce4
Author: Lv Zheng <lv.zheng@intel.com>
Date: Wed Sep 7 14:07:24 2016 +0800
ACPICA: Tables: Tune table mutex to be a leaf lock
ACPICA commit f564d57c6501b97a2871f0b4c048e79910f71783
This causes LoadTable opcode to fail. Fix this mistake.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove duplicated include.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.
Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"nvdimm fixes for v4.8, two of them are tagged for -stable:
- Fix devm_memremap_pages() to use track_pfn_insert(). Otherwise,
DAX pmd mappings end up with an uncached pgprot, and unusable
performance for the device-dax interface. The device-dax interface
appeared in 4.7 so this is tagged for -stable.
- Fix a couple VM_BUG_ON() checks in the show_smaps() path to
understand DAX pmd entries. This fix is tagged for -stable.
- Fix a mis-merge of the nfit machine-check handler to flip the
polarity of an if() to match the final version of the patch that
Vishal sent for 4.8-rc1. Without this the nfit machine check
handler never detects / inserts new 'badblocks' entries which
applications use to identify lost portions of files.
- For test purposes, fix the nvdimm_clear_poison() path to operate on
legacy / simulated nvdimm memory ranges. Without this fix a test
can set badblocks, but never clear them on these ranges.
- Fix the range checking done by dax_dev_pmd_fault(). This is not
tagged for -stable since this problem is mitigated by specifying
aligned resources at device-dax setup time.
These patches have appeared in a next release over the past week. The
recent rebase you can see in the timestamps was to drop an invalid fix
as identified by the updated device-dax unit tests [1]. The -mm
touches have an ack from Andrew"
[1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs"
https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: allow legacy (e820) pmem region to clear bad blocks
nfit, mce: Fix SPA matching logic in MCE handler
mm: fix cache mode of dax pmd mappings
mm: fix show_smap() for zone_device-pmd ranges
dax: fix mapping size check
|
|
On ACPI ARM based systems the GIC interrupt controller
and corresponding interrupt model permit only the high
polarity for level interrupts.
ACPI firmware describes PCI legacy IRQs through entries
in the _PRT objects. Entries in the _PRT can be of two types:
- Static: not configurable, trigger/polarity default to level-low,
_PRT entry defines the global GSI interrupt number
- Configurable: _PRT interrupt entry contains a reference to the
corresponding PCI interrupt link device (that in turn provides the
interrupt descriptor through its _CRS/_PRS methods)
Configurable IRQ entries are not currently allowed by the ACPI
specification on ARM since they can only be used for interrupt pins that
are routable, as per ACPI specifications (version 6.1, 6.2.13):
"[...] There are two ways that _PRT can be used. Typically, the
interrupt input that a given PCI interrupt is on is configurable. For
example, a given PCI interrupt might be configured for either IRQ 10 or
11 on an 8259 interrupt controller. In this model, each interrupt is
represented in the ACPI namespace as a PCI Interrupt Link Device. [...]"
ARM platforms GIC configurations do not allow dynamic IRQ routing,
since routing is statically laid out at synthesis time; therefore PCI
interrupt links cannot be used for PCI legacy IRQ descriptions in the
_PRT on ARM systems.
On the other hand, current core ACPI code handling PCI legacy IRQs
consider IRQ trigger/polarity for static _PRT entries as level-low.
On ARM systems with a GIC interrupt controller and corresponding
ACPI interrupt model this does not work in that GIC interrupt
controller is only capable of handling level interrupts whose
polarity is high (for PCI legacy IRQs - that are level-low by
specification - this means that the legacy IRQs are inverted before
reaching the interrupt controller pin), resulting in IRQ allocation
failures such as:
genirq: Setting trigger mode 8 for irq 18 failed (gic_set_type+0x0/0x48)
Change the default polarity for PCI legacy IRQs to high on systems
booting wth ACPI on platforms with a GIC interrupt controller model,
fixing the discrepancy between specification and HW behaviour.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit f564d57c6501b97a2871f0b4c048e79910f71783
This patch tunes MTX_TABLES into a leaf lock by always ensuring it is
released before holding other locks.
This patch also collects all table loading related functions into
acpi_tb_load_table() (invoked by load_table opcode) and
acpi_tb_install_and_load_table() (invoked by Load opcode and acpi_load_table()) so
that we can have lock tuning code collected at the boundary of these 2
functions. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/f564d57c
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit fd305eda14f1a1e684edef4fac53f194bf00ed3f
This patch fixes an issue with acpi_ds_auto_serialized_method().
The parser will invoke acpi_ex_release_all_mutexes(), which in return
cause mutexes held in ACPI_ERROR_METHOD() failed. Lv Zheng.
Link: https://bugs.acpica.org/show_bug.cgi?id=1324
Link: https://github.com/acpica/acpica/commit/fd305eda
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Greg White <gwhite@kupulau.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 767ee53354e0c4b7e8e7c57c6dd7bf569f0d52bb
There are issues related to the namespace/interpreter locks, which causes
several ACPI functionalities not specification compliant. The lock issues
were detectec when we were trying to fix the functionalities (please see
Link # [1] for the details).
What's the lock issues? Let's first look into the namespace/interpreter
lock usages inside of the object evaluation and the table loading which are
the key AML interpretion code paths:
Table loading:
acpi_ns_load_table
L(Namespace)
acpi_ns_parse_table
acpi_ns_one_complete_parse(LOAD_PASS1/LOAD_PASS2)
acpi_ds_load1_begion_op
acpi_ds_load1_end_op
acpi_ds_load2_begion_op
acpi_ds_load2_end_op
U(Namespace)
Object evaluation:
acpi_ns_evaluate
L(Interpreter)
acpi_ps_execute_method
acpi_ds_exec_begin_op
acpi_ds_exec_end_op
U(Interpreter)
acpi_ns_load_table
L(Namespace)
U(Namespace)
acpi_ev_initialize_region
L(Namespace)
U(Namespace)
address_space.Setup
address_space.Handler
acpi_os_wait_semaphore
acpi_os_acquire_mutex
acpi_os_sleep
L(Interpreter)
U(Interpreter)
L(Interpreter)
acpi_ex_resolve_node_to_value
U(Interpreter)
acpi_ns_check_return_value
Where:
1. L(Interpreter) means acquire(MTX_INTERPRETER);
2. U(Interpreter) means release(MTX_INTERPRETER);
3. L(Namespace) means acquire(MTX_NAMESPACE);
4. U(Namespace) means release(MTX_NAMESPACE);
We can see that acpi_ns_exec_module_code() (which invokes acpi_ns_evaluate) is
implemented in a deferred way just in order to avoid to reacquire the
namespace lock. This is in fact the root cause of many other ACPICA issues:
1. We now know for sure that the module code should be executed right in
place by the Windows AML interpreter. So in the current design, if
the region initializations/accesses or the table loadings (where the
namespace surely should be locked again) happening during the table
loading period, dead lock could happen because ACPICA never unlocks the
namespace during the AML interpretion.
2. ACPICA interpreter just ensures that all static namespace nodes (named
objects created during the acpi_load_tables()) are created
(acpi_ns_lookup()) with the correct lock held, but doesn't ensure that
the named objects created by the control method are created with the
same correct lock held. It requires the control methods to be executed
in a serial way after "loading a table", that's why ACPICA requires
method auto serialization.
This patch fixes these software design issues by extending interpreter
enter/exit APIs to hold both interpreter/namespace locks to ensure the lock
order correctness, so that we can get these code paths:
Table loading:
acpi_ns_load_table
E(Interpreter)
acpi_ns_parse_table
acpi_ns_one_complete_parse
acpi_ns_execute_table
X(Interpreter)
acpi_ns_load_table
acpi_ev_initialize_region
address_space.Setup
address_space.Handler
acpi_os_wait_semaphore
acpi_os_acquire_mutex
acpi_os_sleep
E(Interpreter)
X(Interpreter)
Object evaluation:
acpi_ns_evaluate
E(Interpreter)
acpi_ps_execute_method
X(Interpreter)
acpi_ns_load_table
acpi_ev_initialize_region
address_space.Setup
address_space.Handler
acpi_os_wait_semaphore
acpi_os_acquire_mutex
acpi_os_sleep
E(Interpreter)
X(Interpreter)
Where:
1. E(Interpreter) means acquire(MTX_INTERPRETER, MTX_NAMESPACE);
2. X(Interpreter) means release(MTX_NAMESPACE, MTX_INTERPRETER);
After this change, we can see:
1. All namespace nodes creations are locked by the namespace lock.
2. All namespace nodes referencing are locked with the same lock.
3. But we also can notice a defact that, all namespace nodes deletions
could be affected by this change. As a consequence,
acpi_ns_delete_namespace_subtree() may delete a static namespace node that
is still referenced by the interpreter (for example, the parser scopes).
Currently, we needn't worry about the last defact because in ACPICA, table
unloading is not fully functioning, its design strictly relies on the fact
that when the namespace deletion happens, either the AML table or the OSPMs
should have been notified and thus either the AML table or the OSPMs
shouldn't reference deletion-related namespace nodes during the namespace
deletion. And this change still works with the above restrictions applied.
While making this a-step-forward helps us to correct the wrong grammar to
pull many things back to the correct rail. And pulling things back to the
correct rail in return makes it possible for us to support fully
functioning table unloading after doing many cleanups.
While this patch is generated, all namespace locks are examined to ensure
that they can meet either of the following pattens:
1. L(Namespace)
U(Namespace)
2. E(Interpreter)
X(Interpreter)
3. E(Interpreter)
X(Interpreter)
L(Namespace)
U(Namespace)
E(Interpreter)
X(Interpreter)
We ensure this by adding X(Interpreter)/E(Interpreter) or removing
U(Namespace)/L(Namespace) for those currently are executed in the following
order:
E(Interpreter)
L(Namespace)
U(Namespace)
X(Interpreter)
And adding E(Interpreter)/X(Interpreter) for those currently are executed
in the following order:
X(Interpreter)
E(Interpreter)
Originally, the interpreter lock is held for the execution AML opcodes, the
namespace lock is held for the named object creation AML opcodes. Since
they are actually same in MS interpreter (can all be executed during the
table loading), we can combine the 2 locks and tune the locking code better
in this way. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701 # [1]
Link: https://bugs.acpica.org/show_bug.cgi?id=1323
Link: https://github.com/acpica/acpica/commit/767ee533
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Greg White <gwhite@kupulau.com>
Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 3ef1a1bf5612fe1a629424c09eaaeb6f299d313c
Add acpi_ns_get_node_unlocked() to be used when ACPI_MTX_NAMESPACE is
locked. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3ef1a1bf
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Greg White <gwhite@kupulau.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
for table loading
ACPICA commit 0e24fb67cde08d7df7671d7d7b183490dc79707e
The MLC (Module Level Code) is an ACPICA terminology describing the AML
code out of any control method, its support is an indication of the
interpreter behavior during the table loading.
The original implementation of MLC in ACPICA had several issues:
1. Out of any control method, besides of the object creating opcodes, only
the code blocks wrapped by "If/Else/While" opcodes were supported.
2. The supported MLC code blocks were executed after loading the table
rather than being executed right in place.
============================================================
The demo of this order issue is as follows:
Name (OBJ1, 1)
If (CND1 == 1)
{
Name (OBJ2, 2)
}
Name (OBJ3, 3)
The original MLC support created OBJ2 after OBJ3's creation.
============================================================
Other than these limitations, MLC support in ACPICA looks correct. And
supporting this should be easy/natural for ACPICA, but enabling of this was
blocked by some ACPICA internal and OSPM specific initialization order
issues we've fixed recently. The wrong support started from the following
false bug fixing commit:
Commit: 7f0c826a437157d2b19662977e9cf3b472cf24a6
Subject: ACPICA: Add support for module-level executable AML code
Commit: 9a884ab64a4d092b4c3bf24fd9a30f7fbd4591e7
Subject: ACPICA: Add additional module-level code support
...
We can confirm Windows interpreter behavior via reverse engineering means.
It can be proven that not only If/Else/While wrapped code blocks, all
opcodes can be executed at the module level, including operation region
accesses. And it can be proven that the MLC should be executed right in
place, not in such a deferred way executed after loading the table.
And the above facts indeed reflect the spec words around ACPI definition
block tables (DSDT/SSDT/...), the entire table and the Scope object is
defined by the AML specification in BNF style as:
AMLCode := def_block_header term_list
def_scope := scope_op pkg_length name_string term_list
The bodies of the scope opening terms (AMLCode/Scope) are all term_list,
thus the table loading should be no difference than the control method
evaluations as the body of the Method is also defined by the AML
specification as term_list:
def_method := method_op pkg_length name_string method_flags term_list
The only difference is: after evaluating control method, created named
objects may be freed due to no reference, while named objects created by
the table loading should only be freed after unloading the table.
So this patch follows the spec and the de-facto standard behavior, enables
the new grammar (term_list) for the table loading.
By doing so, beyond the fixes to the above issues, we can see additional
differences comparing to the old grammar based table loading:
1. Originally, beyond the scope opening terms (AMLCode/Scope),
If/Else/While wrapped code blocks under the scope creating terms
(Device/power_resource/Processor/thermal_zone) are also supported as
deferred MLC, which violates the spec defined grammar where object_list
is enforced. With MLC support improved as non-deferred, the interpreter
parses such scope creating terms as term_list rather object_list like the
scope opening terms.
After probing the Windows behavior and proving that it also parses these
terms as term_list, we submitted an ECR (Engineering Change Request) to
the ASWG (ACPI Specification Working Group) to clarify this. The ECR is
titled as "ASL Grammar Clarification for Executable AML Opcodes" and has
been accepted by the ASWG. The new grammar will appear in ACPI
specification 6.2.
2. Originally, Buffer/Package/operation_region/create_XXXField/bank_field
arguments are evaluated in a deferred way after loading the table. With
MLC support improved, they are also parsed right in place during the
table loading.
This is also Windows compliant and the only difference is the removal
of the debugging messages implemented before acpi_ds_execute_arguments(),
see Link # [1] for the details. A previous commit should have ensured
that acpi_check_address_range() won't regress.
Note that enabling this feature may cause regressions due to long term
Linux ACPI support on top of the wrong grammar. So this patch also prepares
a global option to be used to roll back to the old grammar during the
period between a regression is reported and the regression is
root-cause-fixed. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117671 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1]
Link: https://github.com/acpica/acpica/issues/122
Link: https://bugs.acpica.org/show_bug.cgi?id=963
Link: https://github.com/acpica/acpica/commit/0e24fb67
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Ehsan <dashesy@gmail.com>
Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 82101009c7c04845edb3495e66a274a613758bca
Instead of 0xFFFFFFFF, _OSI is now defined to return "Ones".
This is for compatibility with Windows. The ACPI spec will
be updated to reflect this.
Link: https://github.com/acpica/acpica/commit/82101009
Reported-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_gbl_use32_bit_fadt_addresses is TRUE
ACPICA commit aaace77db4c3b267a65b75c33f84ace6f65bbcf7
Originally, when acpi_gbl_use32_bit_fadt_addresses is TRUE, GAS override can
only happen when the Address field mismatches.
According to the investigation result, Windows may favor 32-bit FADT
addresses in some cases. So we need this quirk working after enabling full
GAS support. This requires us to override GAS access_size/bit_width/bit_offset
fields as long as acpi_gbl_use32_bit_fadt_addresses is TRUE.
This patch enhances this quirk mechanism to make it working with full GAS
support. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151501
Link: https://github.com/acpica/acpica/commit/aaace77d
Reported-and-tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
installation/uninstallation
ACPICA commit ed6a5fbc694f3a27d93014391aa9a6f6fe490461
This patch adds 2 new table events to indicate table
installation/uninstallation.
Currently, as ACPICA never uninstalls tables, this patch thus only adds
table handler invocation for the table installation event. Lv Zheng.
The 2 events are to be used to fix a sysfs table handling issue related to
LoadTable opcode (see Link # [1] below). The actual sysfs fixing code is
not included, the sysfs fixes will be sent as separate patches.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1]
Link: https://github.com/acpica/acpica/commit/ed6a5fbc
Reported-by: Jason Voelz <jason.voelz@intel.com>
Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 42c7b848d2faa02c7691ef2c53ea741c23cd4665
acpi_tb_install_fixed_table() is now redundant as we've removed the fixed
table indexing mechanism:
Commit: 8ec3f459073e67e5c6d78507dec693064b3040a2
Subject: ACPICA: Tables: Fix global table list issues by removing
fixed table indexes
This patch cleans up the code accordingly.
No functional change. Lv Zheng.
Link: https://bugs.acpica.org/show_bug.cgi?id=1320
Link: https://github.com/acpica/acpica/commit/42c7b848
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 2ba5d3fdaa24d66d67694cbae6ec66971a7a67c1
Required in some environments.
Link: https://github.com/acpica/acpica/commit/2ba5d3fd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit e2e72a351201fd58e4694418859ae2c247dafca0
Consolidate multiple versions of strtoul64 to one common version.
limit possible bases to either 10 or 16.
Handles both implicit and explicit conversions.
Added a 2-character ascii-to-hex function for GPEs and buffers.
Adds a new file, utstrtoul64.c
Link: https://github.com/acpica/acpica/commit/e2e72a35
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit be5808f0e642ff9963d86f362521b4af2340e2f5
"Execute Predefined" will execute all predefined (public) names
within the namespace.
Link: https://github.com/acpica/acpica/commit/be5808f0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The check for a 'pmem' type SPA in the MCE handler was inverted due to a
merge/rebase error.
Fixes: 6839a6d nfit: do an ARS scrub on hitting a latent media error
Cc: linux-acpi@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are issues related to the boot_ec:
1. If acpi_ec_remove() is invoked, boot_ec will also be freed, this is not
expected as the boot_ec could be enumerated via ECDT.
2. Address space handler installation/unstallation lead to unexpected _REG
evaluations.
This patch adds acpi_is_boot_ec() check to be used to fix the above issues.
However, since acpi_ec_remove() actually won't be invoked, this patch
doesn't handle the reference counting of "struct acpi_ec", it only ensures
the correctness of the boot_ec destruction during the boot.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153511
Reported-and-tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible to register _Qxx from namespace and use the ECDT EC to
perform event handling. The reported bug reveals that Windows is using ECDT
in this way in case the namespace EC is not present. This patch facilitates
Linux to support ECDT in this way.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the handler installation failed, there was no code to free the
allocated EC device. This patch fixes this memory leakage issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to support full ECDT (driving the ECDT EC after probing the
namespace EC), we need to change our EC device alloc/free algorithm, ensure
not to free old boot EC before qualifying new boot EC.
This patch achieves this by cleaning up first_ec/boot_ec logic:
1. first_ec: used to perform transactions, so it is assigned in new
acpi_ec_setup() function.
2. boot_ec: used to track early EC device, so it is assigned in new
acpi_config_boot_ec() function which explictly tells the driver to save
the EC device as early EC device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since struct cpudata is defined in a header file, add prefix cppc_ to
make it not a generic name. Otherwise it causes compile issue in locally
define structure with the same name.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
