summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/sbshc.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-16Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"Chris Bainbridge1-22/+0
Revert commit 3349fb64b292 (ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook), since the delay introduced by it is not necessary any more after commit add68d6aa9e2 (ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code). Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant codeChris Bainbridge1-19/+7
In the SBS initialisation, a reentrant call to wait_event_timeout() causes an intermittent boot stall of several minutes usually following the "Switching to clocksource tsc" message. Another symptom of this bug is high CPU usage from programs (Firefox, upowerd) querying the battery state. This is caused by: 1. drivers/acpi/sbshc.c wait_transaction_complete() calls wait_event_timeout(): if (wait_event_timeout(hc->wait, smb_check_done(hc), msecs_to_jiffies(timeout))) 2. ___wait_event sets task state to uninterruptible 3. ___wait_event calls the "condition" smb_check_done() 4. smb_check_done (sbshc.c) calls through to ec_read() in drivers/acpi/ec.c 5. ec_guard() is reached which calls wait_event_timeout() if (wait_event_timeout(ec->wait, ec_transaction_completed(ec), guard)) ie. wait_event_timeout() is being called again inside evaluation of the previous wait_event_timeout() condition 5. The EC IRQ handler calls wake_up() and wakes up the sleeping task in ec_guard() 6. The task is now in state running even though the wait "condition" is still being evaluated 7. The "condition" check returns false so ___wait_event calls schedule_timeout() 8. Since the task state is running, the scheduler immediately schedules it again 9. This loop usually repeats for around 250 seconds even though the original wait_event_timeout was only 1000ms. The timeout is incorrect because each call to schedule_timeout() usually returns immediately, taking less than 1ms, so the jiffies timeout counter is not decremented. The task is now stuck in a running state, and so is highly likely to be immediately rescheduled, which takes less than a jiffy. The loop will never exit if all schedule_timeout() calls take less than a jiffy. Fix this by replacing SMBus reads in the wait_event_timeout condition with checks of a boolean value that is updated by the EC query handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=107191 Link: https://lkml.org/lkml/2015/11/6/776 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBookChris Bainbridge1-0/+22
Commit 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' caused the MacBook firmware to expose the SBS, resulting in intermittent hangs of several minutes on boot, and failure to detect or report the battery. Fix this by adding a 5 us delay to the start of each SMBUS transaction. This timing is the result of experimentation - hangs were observed with 3 us but never with 5 us. Fixes: 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: 3.18+ <stable@vger.kernel.org> # 3.18+ [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng1-2/+1
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki1-2/+2
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2012-09-21ACPI/sbshc: convert to module_acpi_driver()Mika Westerberg1-17/+1
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-10-31acpi: add module.h to files implicitly using/relying on it.Paul Gortmaker1-0/+1
These files are using standard module API things like MODULE_AUTHOR etc. and so should not be relying on an implicit presence of the module.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-05-06sbshc: acpi_device_class "smbus_host_controller" too longDan Carpenter1-1/+1
acpi_device_class can only be 19 characters and a NULL terminator. With the current name we get a buffer overflow in acpi_smbus_hc_add() when we do: strcpy(acpi_device_class(device), ACPI_SMB_HC_CLASS); Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-15ACPI: SBS: Move SBS HC callback to faster Notify queueAlexey Starikovskiy1-1/+1
SBS transactions should happen in Notify work queue, to not create a dead lock with GPE execution accessing SBS devices. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown1-0/+2
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: remove private acpica headers from driver filesLin Ming1-1/+0
External driver files should not include any private acpica headers. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ull' into testLen Brown1-1/+1
Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox1-1/+1
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10ACPI: catch calls of acpi_driver_data on pointer of wrong typePavel Machek1-2/+2
Catch attempts to use of acpi_driver_data on pointers of wrong type. akpm: rewritten to use proper C typechecking and remove the "function"-used-as-lvalue thing. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-04ACPI: Avoid bogus timeout about SMbus checkZhao Yakui1-0/+7
In the function of wait_transaction_complete when the timeout happens, OS will try to check the status of SMbus again. If the status is what OS expected, it will be regarded as the bogus timeout. Otherwise it will be treated as ETIME. http://bugzilla.kernel.org/show_bug.cgi?id=10483 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> tested-by : Oldřich Jedlička < <oldium.pro@seznam.cz> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-03-18ACPI: SBS: remove typo from sbchc.cAlexey Starikovskiy1-1/+0
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09ACPI: SBS: Host controller must initialize before SBS.Alexey Starikovskiy1-0/+6
In static case sbshc must be compiled ahead of sbs, so that hc is configured first. http://bugzilla.kernel.org/show_bug.cgi?id=9910 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: misc cleanupsAdrian Bunk1-2/+2
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-14ACPI: SBS: Ignore alarms coming from unknown devicesAlexey Starikovskiy1-4/+12
http://bugzilla.kernel.org/show_bug.cgi?id=9362 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-14ACPI: SBS: Reset alarm bitAlexey Starikovskiy1-0/+1
Alarm bit should be cleared in order for other alarms to be sent. http://bugzilla.kernel.org/show_bug.cgi?id=9362 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-27ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002)Alexey Starikovskiy1-0/+309
Replace poll-based host controller driver with the notify-based one. Split it out of sbs.c. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>