summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/processor_throttling.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-04x86: ACPI: fix CPU hotplug deadlockQian Cai1-7/+0
Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai <cai@lca.pw> Tested-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-14/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+3
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-05-26acpi/processor: Prevent cpu hotplug deadlockThomas Gleixner1-8/+8
With the enhanced CPU hotplug lockdep coverage the following lockdep splat happens: ====================================================== WARNING: possible circular locking dependency detected 4.12.0-rc2+ #84 Tainted: G W ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: flush_work+0x39/0x2f0 but task is already holding lock: cpuhp_thread_fun+0x30/0x160 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuhp_state){+.+.+.}: lock_acquire+0xb4/0x200 cpuhp_kick_ap_work+0x72/0x330 _cpu_down+0x8b/0x100 do_cpu_down+0x3e/0x60 cpu_down+0x10/0x20 cpu_subsys_offline+0x14/0x20 device_offline+0x88/0xb0 online_store+0x4c/0xa0 dev_attr_store+0x18/0x30 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x156/0x1e0 __vfs_write+0x37/0x160 vfs_write+0xca/0x1c0 SyS_write+0x58/0xc0 entry_SYSCALL_64_fastpath+0x23/0xc2 -> #1 (cpu_hotplug_lock.rw_sem){++++++}: lock_acquire+0xb4/0x200 cpus_read_lock+0x3d/0xb0 apply_workqueue_attrs+0x17/0x50 __alloc_workqueue_key+0x1e1/0x530 scsi_host_alloc+0x373/0x480 [scsi_mod] ata_scsi_add_hosts+0xcb/0x130 [libata] ata_host_register+0x11a/0x2c0 [libata] ata_host_activate+0xf0/0x150 [libata] ahci_host_activate+0x13e/0x170 [libahci] ahci_init_one+0xa3a/0xd3f [ahci] local_pci_probe+0x45/0xa0 work_for_cpu_fn+0x14/0x20 process_one_work+0x1f9/0x690 worker_thread+0x200/0x3d0 kthread+0x138/0x170 ret_from_fork+0x31/0x40 -> #0 ((&wfc.work)){+.+.+.}: __lock_acquire+0x11e1/0x13e0 lock_acquire+0xb4/0x200 flush_work+0x5c/0x2f0 work_on_cpu+0xa1/0xd0 acpi_processor_get_throttling+0x3d/0x50 acpi_processor_reevaluate_tstate+0x2c/0x50 acpi_soft_cpu_online+0x69/0xd0 cpuhp_invoke_callback+0xb4/0x8b0 cpuhp_up_callbacks+0x36/0xc0 cpuhp_thread_fun+0x14e/0x160 smpboot_thread_fn+0x1e8/0x300 kthread+0x138/0x170 ret_from_fork+0x31/0x40 other info that might help us debug this: Chain exists of: (&wfc.work) --> cpu_hotplug_lock.rw_sem --> cpuhp_state Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuhp_state); lock(cpu_hotplug_lock.rw_sem); lock(cpuhp_state); lock((&wfc.work)); *** DEADLOCK *** 1 lock held by cpuhp/1/15: cpuhp_thread_fun+0x30/0x160 stack backtrace: CPU: 1 PID: 15 Comm: cpuhp/1 Tainted: G W 4.12.0-rc2+ #84 Hardware name: Supermicro SYS-4048B-TR4FT/X10QBi, BIOS 1.1a 07/29/2015 Call Trace: dump_stack+0x85/0xc4 print_circular_bug+0x209/0x217 __lock_acquire+0x11e1/0x13e0 lock_acquire+0xb4/0x200 ? lock_acquire+0xb4/0x200 ? flush_work+0x39/0x2f0 ? acpi_processor_start+0x50/0x50 flush_work+0x5c/0x2f0 ? flush_work+0x39/0x2f0 ? acpi_processor_start+0x50/0x50 ? mark_held_locks+0x6d/0x90 ? queue_work_on+0x56/0x90 ? trace_hardirqs_on_caller+0x154/0x1c0 ? trace_hardirqs_on+0xd/0x10 ? acpi_processor_start+0x50/0x50 work_on_cpu+0xa1/0xd0 ? find_worker_executing_work+0x50/0x50 ? acpi_processor_power_exit+0x70/0x70 acpi_processor_get_throttling+0x3d/0x50 acpi_processor_reevaluate_tstate+0x2c/0x50 acpi_soft_cpu_online+0x69/0xd0 cpuhp_invoke_callback+0xb4/0x8b0 ? lock_acquire+0xb4/0x200 ? padata_replace+0x120/0x120 cpuhp_up_callbacks+0x36/0xc0 cpuhp_thread_fun+0x14e/0x160 smpboot_thread_fn+0x1e8/0x300 kthread+0x138/0x170 ? sort_range+0x30/0x30 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x31/0x40 The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-acpi@vger.kernel.org Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20170524081549.620489733@linutronix.de
2017-04-15ACPI/processor: Replace racy task affinity logicThomas Gleixner1-26/+36
acpi_processor_get_throttling() requires to invoke the getter function on the target CPU. This is achieved by temporarily setting the affinity of the calling user space thread to the requested CPU and reset it to the original affinity afterwards. That's racy vs. CPU hotplug and concurrent affinity settings for that thread resulting in code executing on the wrong CPU and overwriting the new affinity setting. acpi_processor_get_throttling() is invoked in two ways: 1) The CPU online callback, which is already running on the target CPU and obviously protected against hotplug and not affected by affinity settings. 2) The ACPI driver probe function, which is not protected against hotplug during modprobe. Switch it over to work_on_cpu() and protect the probe function against CPU hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19ACPI/processor: Convert to hotplug state machineSebastian Andrzej Siewior1-2/+2
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-acpi@vger.kernel.org Cc: rt@linutronix.de Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20160906170457.32393-12-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-02ACPI / processor: Avoid reserving IO regions too earlyRafael J. Wysocki1-0/+9
Roland Dreier reports that one of his systems cannot boot because of the changes made by commit ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure). The problematic part of it is the request_region() call in acpi_processor_get_info() that used to run at module init time before the above commit and now it runs much earlier. Unfortunately, the region(s) reserved by it fall into a range the PCI subsystem attempts to reserve for AHCI IO BARs. As a result, the PCI reservation fails and AHCI doesn't work, while previously the PCI reservation would be made before acpi_processor_get_info() and it would succeed. That request_region() call, however, was overlooked by commit ac212b6980d8, as it is not necessary for the enumeration of the processors. It only is needed when the ACPI processor driver actually attempts to handle them which doesn't happen before loading the ACPI processor driver module. Therefore that call should have been moved from acpi_processor_get_info() into that module. Address the problem by moving the request_region() call in question out of acpi_processor_get_info() and use the observation that the region reserved by it is only needed if the FADT-based CPU throttling method is going to be used, which means that it should be sufficient to invoke it from acpi_processor_get_throttling_fadt(). Fixes: ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure) Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08ACPI: Remove FSF mailing addressesJarkko Nikula1-4/+0
There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-27ACPI / processor: Rework processor throttling with work_on_cpu()Lan Tianyu1-37/+32
acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make sure that the (struct acpi_processor)->acpi_processor_set_throttling() callback will run on the right CPU. However, the function may be called from a worker thread already bound to a different CPU in which case that won't work. Make acpi_processor_set_throttling() use work_on_cpu() as appropriate instead of abusing set_cpus_allowed_ptr(). Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: All applicable <stable@vger.kernel.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng1-5/+2
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25ACPI: suppress compiler warnings in processor_throttling.cAndy Shevchenko1-1/+2
This patch fixes following compiler warnings when build via make W=1: drivers/acpi/processor_throttling.c: In function ‘acpi_processor_throttling_init’: drivers/acpi/processor_throttling.c:216:40: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-03-30ACPI throttling: fix endian bug in acpi_read_throttling_status()Dan Carpenter1-3/+2
Using a u64 here creates an endian bug. We store a u32 number in the top byte which is a larger number than intended on big endian systems. There is no reason to use a 64 bit data type here, I guess it was just an oversight. I removed the initialization to zero as well. It's needed with a u64 but with a u32, the variable gets initialized properly inside the call to acpi_os_read_port(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-02Merge branch 'x86/urgent' into x86-mmTejun Heo1-1/+1
Merge reason: Pick up the following two fix commits. 2be19102b7: x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo() 765af22da8: x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change Scheduled NUMA init 32/64bit unification changes depend on these. Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29acpi throttling: Use this_cpu_has and simplify code current cpuChristoph Lameter1-22/+10
With the this_cpu_xx we no longer need to pass an acpi structure to the msr management code. Simplifies code and improves performance. NOTE: This code is x86 specific (see #ifdef CONFIG_X86) but not under arch/x86. Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-12Merge branch 'throttling' into releaseLen Brown1-3/+73
2011-01-10ACPI: Reevaluate whether the T-state is supported or not after cpu is ↵Zhao Yakui1-0/+52
online/offline After one CPU is offlined, it is unnecessary to switch T-state for it. So it will be better that the throttling is disabled after the cpu is offline. At the same time after one cpu is online, we should check whether the T-state is supported and then set the corresponding T-state flag. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-10ACPI: Check the returned value of set_cpus_allowed_ptr before T-state operationZhao Yakui1-3/+21
Now before it executes the T-state operation on one CPU, it will try to migrate to the target CPU. Especially this is required on the system that uses the MSR_IA32_THERMAL_CONTROL register to switch T-state. But unfortunately it doesn't check whether the migration is successful or not. In such case we will get/set the incorrect T-state on the offline CPU as it fails in the migration to the offline CPU. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-14ACPI processor: remove processor throttling control procfs I/FZhang Rui1-114/+0
Remove deprecated ACPI process procfs I/F for throttling control. This is because the t-state control should only be done in kernel, when system is in a overheating state. Now users can only change the processor t-state indirectly, by poking the cooling device sysfs I/F of the processor. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15ACPI processor: make /proc/acpi/processor/*/throttle depends on ↵Zhang Rui1-0/+4
CONFIG_ACPI_PROCFS As a feature that would only be used when system is overheating, the processor t-state control should not be exported to user space. Make /proc/acpi/processor/*/throttle depends on CONFIG_ACPI_PROCFS, which is cleared by default. And we will remove this I/F in 2.6.38. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI processor: remove deprecated ACPI procfs I/FZhang Rui1-2/+0
Remove deprecated ACPI processor procfs I/F, including: /proc/acpi/processor/CPUX/power /proc/acpi/processor/CPUX/limit /proc/acpi/processor/CPUX/info /proc/acpi/processor/CPUX/throttling still exists, as we don't have sysfs I/F available for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-14Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown1-15/+12
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-02-16ACPI: remove superfluous NULL pointer check from ↵Bartlomiej Zolnierkiewicz1-3/+0
acpi_processor_get_throttling_info() Dan's list contains: drivers/acpi/processor_throttling.c +1139 acpi_processor_get_throttling_info(11) warning: variable derefenced before check 'pr' acpi_processor_get_throttling_info() is never called with pr == NULL. [ bart: the potential NULL pointer dereference was finally fixed in (much later than mine) commit 5cfa245 but my patch is still valid ] Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-28ACPI: replace acpi_integer by u64Lin Ming1-12/+12
acpi_integer is now obsolete and removed from the ACPICA code base, replaced by u64. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-05ACPI: Move dereference after NULL testJulia Lawall1-3/+3
If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-24cpumask: use zalloc_cpumask_var() where possibleLi Zefan1-2/+1
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-19Merge branch 'processor-procfs-2.6.32' into releaseLen Brown1-1/+2
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown1-0/+2
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-26acpi processor: remove superfluous warning messageFrans Pop1-2/+2
This failure is very common on many platforms. Handling it in the ACPI processor driver is enough, and we don't need a warning message unless CONFIG_ACPI_DEBUG is set. Based on a patch from Zhang Rui. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-26ACPI processor: force throttling state when BIOS returns incorrect valueFrans Pop1-12/+14
If the BIOS reports an invalid throttling state (which seems to be fairly common after system boot), a reset is done to state T0. Because of a check in acpi_processor_get_throttling_ptc(), the reset never actually gets executed, which results in the error reoccurring on every access of for example /proc/acpi/processor/CPU0/throttling. Add a 'force' option to acpi_processor_set_throttling() to ensure the reset really takes effect. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 This patch, together with the next one, fixes a regression introduced in 2.6.30, listed on the regression list. They have been available for 2.5 months now in bugzilla, but have not been picked up, despite various reminders and without any reason given. Google shows that numerous people are hitting this issue. The issue is in itself relatively minor, but the bug in the code is clear. The patches have been in all my kernels and today testing has shown that throttling works correctly with the patches applied when the system overheats (http://bugzilla.kernel.org/show_bug.cgi?id=13918#c14). Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24ACPI: Make ACPI processor proc I/F depend on the ACPI_PROCFSZhao Yakui1-1/+2
Now whether the ACPI processor proc I/F is registered depends on the CONFIG_PROC. It had better depend on the CONFIG_ACPI_PROCFS. When the CONFIG_ACPI_PROCFS is unset in kernel configuration, the ACPI processor proc I/F won't be registered. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI processor: remove spurious newline from warning messageFrans Pop1-1/+1
Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15ACPI processor: reset the throttling state once it's invalidZhang Rui1-0/+8
If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15ACPI processor: introduce module parameter processor.ignore_tpcZhang Rui1-0/+17
Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'misc' into releaseLen Brown1-4/+2
2009-04-03ACPI: constify VFTs (1/2)Jan Engelhardt1-1/+1
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03ACPI: get_throttling_state() cannot be larger than state_countLen Brown1-4/+2
Reported-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-03cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_tRusty Russell1-28/+52
Impact: Reduce memory usage, use new API. This is part of an effort to reduce structure sizes for machines configured with large NR_CPUS. cpumask_t gets replaced by cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or struct cpumask * (large NR_CPUS). (Changes to powernow-k* by <travis>.) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-07ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.hBjorn Helgaas1-1/+1
Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ull' into testLen Brown1-1/+1
Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22ACPI: replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printkLin Ming1-5/+5
ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core. So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...) and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...) We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see ------------------------------------------------------------- commit 6468463abd7051fcc29f3ee7c931f9bbbb26f5a4 Author: Len Brown <len.brown@intel.com> Date: Mon Jun 26 23:41:38 2006 -0400 ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...) Signed-off-by: Len Brown <len.brown@intel.com> ------------------------------------------------------------- Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox1-1/+1
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-26cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpuMike Travis1-8/+3
* Replace previous instances of the cpumask_of_cpu_ptr* macros with a the new (lvalue capable) generic cpumask_of_cpu(). Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptrMike Travis1-3/+8
* This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'linus' into cpus4096Ingo Molnar1-11/+27
Conflicts: drivers/acpi/processor_throttling.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16acpi: fix printk format warningRandy Dunlap1-1/+1
Fix printk format warning: linux-next-20080617/drivers/acpi/processor_throttling.c:1258: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: fix processor throttling set errorYi Yang1-4/+20
http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: change processors from array to per_cpu variableMike Travis1-7/+7
Change processors from an array sized by NR_CPUS to a per_cpu variable. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>