summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/processor_core.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25ACPI: processor: Remove dead ACPICA debug codeHanjun Guo1-3/+0
The ACPICA debug code is not used anywhere in processor_core.c and processor_thermal.c, remove it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-20xen/ACPI: don't upload Px/Cx data for disabled processorsJan Beulich1-0/+1
This is unnecessary and triggers a warning in the hypervisor. Often systems have more processor entries in their ACPI tables than are actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be reliably used, but the ACPI_MADT_ENABLED bit can. In order to not introduce new functions in the main ACPI processor driver code, simply use acpi_get_phys_id(), which does more than we need, but which checks the MADT enabled bit in the process. Any CPU for which we can't determine the APIC ID is unlikely to work properly anyway, so the extra checks done by acpi_get_phys_id() should do no harm. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-03-11Revert"x86/acpi: Enable MADT APIs to return disabled apicids"Dou Liyang1-38/+22
Revert: 8ad893faf2ea ("x86/acpi: Enable MADT APIs to return disabled apicids") Remove the leftovers of the boot time 'cpuid <-> nodeid' mapping approach. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-3-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-11Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"Dou Liyang1-73/+0
Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-21ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() usersLv Zheng1-5/+3
This patch removes the users of the deprectated APIs: acpi_get_table_with_size() early_acpi_os_unmap_memory() The following APIs should be used instead of: acpi_get_table() acpi_put_table() The deprecated APIs are invented to be a replacement of acpi_get_table() during the early stage so that the early mapped pointer will not be stored in ACPICA core and thus the late stage acpi_get_table() won't return a wrong pointer. The mapping size is returned just because it is required by early_acpi_os_unmap_memory() to unmap the pointer during early stage. But as the mapping size equals to the acpi_table_header.length (see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when such a convenient result is returned, driver code will start to use it instead of accessing acpi_table_header to obtain the length. Thus this patch cleans up the drivers by replacing returned table size with acpi_table_header.length, and should be a no-op. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-23acpi: Fix broken error check in map_processor()Thomas Gleixner1-4/+5
map_processor() checks the cpuid value returned by acpi_map_cpuid() for -1 but acpi_map_cpuid() returns -EINVAL in case of error. As a consequence the error is ignored and the following access into percpu data with that negative cpuid results in a boot crash. This happens always when NR_CPUS/nr_cpu_ids is smaller than the number of processors listed in the ACPI tables. Use a proper error check for id < 0 so the function returns instead of trying to map CPU#(-EINVAL). Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: akpm@linux-foundation.org Cc: chen.tang@easystack.cn Cc: cl@linux.com Cc: gongzhaogang@inspur.com Cc: isimatu.yasuaki@jp.fujitsu.com Cc: izumi.taku@jp.fujitsu.com Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: len.brown@intel.com Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: linux-mm@kvack.org Cc: mika.j.penttila@gmail.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: tj@kernel.org Cc: yasu.isimatu@gmail.com Fixes: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609231705570.5640@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-21acpi: Validate processor id when mapping the processorDou Liyang1-0/+4
When we want to identify whether the proc_id is unreasonable or not, we can call the "acpi_processor_validate_proc_id" function. It will search in the duplicate IDs. If we find the proc_id in the IDs, we return true to the call function. Conversely, the false represents available. When we establish all possible cpuid <-> nodeid mapping to handle the cpu hotplugs, we will use the proc_id from ACPI table. We do validation when we get the proc_id. If the result is true, we will stop the mapping. [ tglx: Mark the new function __init ] Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-8-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21x86/acpi: Set persistent cpuid <-> nodeid mapping when bootingGu Zheng1-0/+68
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 4. This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled processors at boot time via an additional acpi namespace walk for processors. [ tglx: Remove the unneeded exports ] Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-6-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21x86/acpi: Enable MADT APIs to return disabled apicidsGu Zheng1-22/+38
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 3. There are four mappings in the kernel: 1. nodeid (logical node id) <-> pxm (persistent) 2. apicid (physical cpu id) <-> nodeid (persistent) 3. cpuid (logical cpu id) <-> apicid (not persistent, now persistent by step 2) 4. cpuid (logical cpu id) <-> nodeid (not persistent) So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs, we should: 1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2. 2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should obtain all apicids from MADT. All processors' apicids can be obtained by _MAT method or from MADT in ACPI. The current code ignores disabled processors and returns -ENODEV. After this patch, a new parameter will be added to MADT APIs so that caller is able to control if disabled processors are ignored. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-5-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-30ACPI / processor: Add acpi_map_madt_entry()David Daney1-4/+22
Follow-on arm64 ACPI/NUMA patches need to map MADT entries very early (before kmalloc is usable). Add acpi_map_madt_entry() which, indirectly, uses early_memremap()/early_memunmap() to access the table and parse out the mpidr. The existing implementation of map_madt_entry() is modified to take a pointer to the MADT as a parameter and the callers adjusted. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-13ACPI / processor: Introduce invalid_phys_cpuid()Hanjun Guo1-2/+2
Introduce invalid_phys_cpuid() to identify cpu with invalid physical ID, then used it as replacement of the direct comparisons with PHYS_CPUID_INVALID. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-13ACPI / processor: return specific error instead of -1Hanjun Guo1-3/+3
Since invalid_logical_cpuid() can check error values, so return specific error instead of -1 for acpi_map_cpuid(). Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-26ACPI / processor: Make it possible to get CPU hardware ID via GICCHanjun Guo1-0/+30
Introduce a new function map_gicc_mpidr() to allow MPIDRs to be obtained from the GICC Structure introduced by ACPI 5.1, since MPIDR for ARM64 is 64-bit, so typedef u64 for phys_cpuid_t. The ARM architecture defines the MPIDR register as the CPU hardware identifier. This patch adds the code infrastructure to retrieve the MPIDR values from the ARM ACPI GICC structure in order to look-up the kernel CPU hardware ids required by the ACPI core code to identify CPUs. CC: Rafael J. Wysocki <rjw@rjwysocki.net> CC: Catalin Marinas <catalin.marinas@arm.com> CC: Will Deacon <will.deacon@arm.com> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Yijing Wang <wangyijing@huawei.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Timur Tabi <timur@codeaurora.org> Tested-by: Robert Richter <rrichter@cavium.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-26ACPI / processor: Introduce phys_cpuid_t for CPU hardware IDCatalin Marinas1-15/+15
CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki <rjw@rjwysocki.net> Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-02-05ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplugYinghai Lu1-9/+114
We need to parse APIC ID for IOAPIC registration for IOAPIC hotplug. ACPI _MAT method and MADT table are used to figure out IOAPIC ID, just like parsing CPU APIC ID for CPU hotplug. [ tglx: Fixed docbook comment ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-05ACPI / processor: Convert apic_id to phys_id to make it arch agnosticHanjun Guo1-28/+28
apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-16ACPI: Fix minor syntax issues in processor_core.cJiang Liu1-5/+4
Fix minor syntax issues in processor_core.c to follow coding styles. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-7-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-24ACPI / processor: use container_of instead of casting first structure memberFabian Frederick1-3/+3
Use container_of instead of casting first structure member to resolve acpi_madt_local_apic/sapic/x2apic from acpi_subtable_header. Signed-off-by: Fabian Frederick <fabf@skynet.be> [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-05Merge branches 'acpi-video', 'acpi-battery', 'acpi-processor' and 'acpi-lpss'Rafael J. Wysocki1-0/+2
* acpi-video: ACPI / video: Add use_native_backlight quirk for HP EliteBook 2014 models * acpi-battery: ACPI / battery: remove duplicated include from battery.c * acpi-processor: ACPI / processor: Make it possible to get local x2apic id via _MAT * acpi-lpss: ACPI / LPSS: add LPSS device for Wildcat Point PCH
2014-07-30ACPI / processor: Make it possible to get local x2apic id via _MATHanjun Guo1-0/+2
Logical processors with APIC ID values of 255 and greater are required to have a Processor Device object and must convey the processor's APIC information to OSPM using the Processor Local X2APIC structure, but not until ACPI 5.1, X2APIC structure was not supported in _MAT method. _MAT is needed for CPU hotplug and system with more than 255 CPUs will definitely need X2APIC structure, so add its support in map_mat_entry() to make it possible to get local x2apic id via _MAT based on ACPI 5.1. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDCHanjun Guo1-198/+0
The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC, as ARM platform is supported only in ACPI 5.0 or higher version, _PDC will not be used in ARM platform, so make Make _PDC only for platforms with Intel CPUs. Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in ACPI processor driver into a single file processor_pdc.c, make x86 and ia64 select it when ACPI is enabled. This patch also use pr_* to replace printk to fix the checkpatch warning and factor acpi_processor_alloc_pdc() a little bit to avoid duplicate pr_err() code. Suggested-by: Robert Richter <rric@kernel.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-01Merge branches 'acpi-processor' and 'pnp'Rafael J. Wysocki1-27/+0
* acpi-processor: Revert "ACPI / processor: Make it possible to get APIC ID via GIC" * pnp: PNP: remove deprecated IRQF_DISABLED
2014-03-26Revert "ACPI / processor: Make it possible to get APIC ID via GIC"Hanjun Guo1-27/+0
Revert commit df86f5df79d8 (ACPI / processor: Make it possible to get APIC ID via GIC). APIC ID refers the hardware ID of the CPU, which means MPIDR on ARM/ARM64, but in ACPI 5.0, GIC ID feild in GIC structure have no explicit definition and may not refer to the MPIDR. Commit df86f5df79d8 assumed that gic->gic_id as MPIDR which may not be the case, so revert it until the explicit definition of GIC structure is ready. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-21Merge branch 'acpi-processor'Rafael J. Wysocki1-21/+57
* acpi-processor: ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h ACPI / processor: Make it possible to get APIC ID via GIC ACPI / processor: Build idle_boot_override on x86 and ia64 ACPI / processor: Use ACPI_PROCESSOR_DEVICE_HID instead of "ACPI0007" ACPI / processor: Fix acpi_processor_eval_pdc() return value type
2014-03-19ACPI: Remove duplicate definitions of PREFIXHanjun Guo1-1/+0
We already have a macro for PREFIX of "ACPI: " in drivers/acpi/internal.h, so remove the duplicate ones in ACPI drivers when internal.h is included. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-19ACPI / processor: Make it possible to get APIC ID via GICHanjun Guo1-0/+27
Introduce a new function map_gic_id() to allow APIC IDs to be obtained from the GIC Structure introduced by ACPI 5. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-19ACPI / processor: Build idle_boot_override on x86 and ia64Hanjun Guo1-19/+28
idle_boot_override depends on x86 and ia64 now and it is not clear whether or not it will be used on ARM or ARM64, so put the DMI blacklist setting it in processor_core.c into a #if block so that it is built for CONFIG_X86 or CONFIG_IA64 only to allow processor_core.c to be compiled for ARM64. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-19ACPI / processor: Use ACPI_PROCESSOR_DEVICE_HID instead of "ACPI0007"Hanjun Guo1-1/+1
Replace "ACPI0007" with ACPI_PROCESSOR_DEVICE_HID to improve code readability. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-19ACPI / processor: Fix acpi_processor_eval_pdc() return value typeHanjun Guo1-1/+1
The return value type of acpi_processor_eval_pdc() should be 'acpi_status' but is defined as 'int', so fix it. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-29Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and ↵Rafael J. Wysocki1-13/+13
'acpica' * acpi-processor: ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" ACPI / processor: Return specific error value when mapping lapic id * acpi-hotplug: ACPI / scan: Clear match_driver flag in acpi_bus_trim() * acpi-init: ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API * acpi-pm: ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices * acpica: ACPICA: Remove bool usage from ACPICA.
2014-01-27ACPI / processor: Return specific error value when mapping lapic idHanjun Guo1-13/+13
Usually, 0 is returned for success in int-returning functions and negative value are returned on failure, but in processor_core.c, some function return 1 for success and 0 for failure which causes confusion to happen sometimes, so modify the functions in question to follow the common convention.. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng1-2/+1
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24ACPI / processor: Introduce apic_id in struct processor to save parsed APIC idJiang Liu1-5/+21
For cpu hot add, we evaluate _MAT or parse MADT twice to get APIC id, here is the code logic: acpi_processor_add() acpi_processor_get_info() acpi_get_cpuid() will evaluate _MAT or parse MADT; acpi_processor_hotadd_init() acpi_map_lsapic() will evaluate _MAT again; This can be done more effectively, this patch introduces apic_id in struct processor to save parsed APIC id, and then we can use it and remove the duplicated _MAT evaluation. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14Merge back earlier 'acpi-assorted' materialRafael J. Wysocki1-1/+1
2013-08-07ACPI / processor: Fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-14acpi: delete __cpuinit usage from all acpi filesPaul Gortmaker1-4/+4
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/acpi uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: linux-acpi@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-03-04ACPI / processor: Remove redundant NULL check before kfreeSyam Sidhardhan1-2/+1
kfree() on a NULL pointer is a no-op, so remove a redundant NULL pointer check in map_mat_entry(). [rjw: Changelog] Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-07-12cpufreq / ACPI: Fix not loading acpi-cpufreq driver regressionThomas Renninger1-2/+4
Commit d640113fe80e45ebd4a5b420b introduced a regression on SMP systems where the processor core with ACPI id zero is disabled (typically should be the case because of hyperthreading). The regression got spread through stable kernels. On 3.0.X it got introduced via 3.0.18. Such platforms may be rare, but do exist. Look out for a disabled processor with acpi_id 0 in dmesg: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled) This problem has been observed on a: HP Proliant BL280c G6 blade This patch restricts the introduced workaround to platforms with nr_cpu_ids <= 1. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-17ACPI: processor: fix acpi_get_cpuid for UP processorLin Ming1-2/+24
For UP processor, it is likely that no _MAT method or MADT table defined. So currently acpi_get_cpuid(...) always return -1 for UP processor. This is wrong. It should return valid value for CPU0. In the other hand, BIOS may define multiple CPU handles even for UP processor, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } We should only return valid value for CPU0's acpi handle. And return invalid value for others. http://marc.info/?t=132329819900003&r=1&w=2 Cc: stable@vger.kernel.org Reported-and-tested-by: wallak@free.fr Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-10-31acpi: add export.h to files using THIS_MODULE/EXPORT_SYMBOLPaul Gortmaker1-0/+1
These files were relying on module.h to come in via the path in an include/acpi header file, but we don't want to have instances of module.h being included from include/* files if it can be avoided. Have the files include export.h instead. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-29ACPI: processor: fix processor_physically_present in UP kernelLin Ming1-3/+9
Usually, there are multiple processors defined in ACPI table, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } processor_physically_present(...) will be called to check whether those processors are physically present. Currently we have below codes in processor_physically_present, cpuid = acpi_get_cpuid(...); if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; In UP kernel, acpi_get_cpuid(...) always return -1 and num_possible_cpus() always return 1, so processor_physically_present(...) always returns true for all passed in processor handles. This is wrong for UP processor or SMP processor running UP kernel. This patch removes the !SMP version of acpi_get_cpuid(), so both UP and SMP kernel use the same acpi_get_cpuid function. And for UP kernel, only processor 0 is valid. https://bugzilla.kernel.org/show_bug.cgi?id=16548 https://bugzilla.kernel.org/show_bug.cgi?id=16357 Tested-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-02ACPI: use __cpuinit for the acpi_processor_set_pdc() call treeJan Beulich1-4/+4
Once acpi_map_lsapic() in ia64 follows how x86 treats it wrt section placement, the whole tree from acpi_processor_set_pdc() can become __cpuinit. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-02ACPI: use __init where possible in processor driverJan Beulich1-5/+4
Use __init for several functions, remove an unnecessary export and a stray use of __ref. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI, intel_idle: Cleanup idle= internal variablesThomas Renninger1-2/+2
Having four variables for the same thing: idle_halt, idle_nomwait, force_mwait and boot_option_idle_overrides is rather confusing and unnecessary complex. if idle= boot param is passed, only set up one variable: boot_option_idle_overrides Introduces following functional changes/fixes: - intel_idle driver does not register if any idle=xy boot param is passed. - processor_idle.c will also not register a cpuidle driver and get active if idle=halt is passed. Before a cpuidle driver with one (C1, halt) state got registered Now the default_idle function will be used which finally uses the same idle call to enter sleep state (safe_halt()), but without registering a whole cpuidle driver. That means idle= param will always avoid cpuidle drivers to register with one exception (same behavior as before): idle=nomwait may still register acpi_idle cpuidle driver, but C1 will not use mwait, but hlt. This can be a workaround for IO based deeper sleep states where C1 mwait causes problems. Signed-off-by: Thomas Renninger <trenn@suse.de> cc: x86@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-08Merge branch 'pdc-regression' into releaseLen Brown1-0/+1
2010-10-01ACPI: Handle ACPI0007 Device in acpi_early_set_pdcYinghai Lu1-0/+1
After | commit d8191fa4a33fdc817277da4f2b7f771ff605a41c | Author: Alex Chiang <achiang@hp.com> | Date: Mon Feb 22 12:11:39 2010 -0700 | | ACPI: processor: driver doesn't need to evaluate _PDC | | Now that the early _PDC evaluation path knows how to correctly | evaluate _PDC on only physically present processors, there's no | need for the processor driver to evaluate it later when it loads. | | To cover the hotplug case, push _PDC evaluation down into the | hotplug paths. only cpu with Processor Statement get processed with _PDC If bios is using Device object instead of Processor statement. SSDTs for Pstate/Cstate/Tstate can not be loaded dynamically. Need to try to scan ACPI0007 in addition to Processor. That commit is between 2.6.34-rc1 and 2.6.34-rc2, so stable tree for 2.6.34+ need this patch. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28ACPI: delete ZEPTO idle=nomwait DMI quirkLen Brown1-6/+0
per comments in the bug report, this entry seems to hurt at much as it helps. https://bugzilla.kernel.org/show_bug.cgi?id=10807 Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-12ACPI: processor: fix processor_physically_present on UPAlex Chiang1-1/+1
The commit 5d554a7bb06 (ACPI: processor: add internal processor_physically_present()) is broken on uniprocessor (UP) configurations, as acpi_get_cpuid() will always return -1. We use the value of num_possible_cpus() to tell us whether we got an invalid cpuid from acpi_get_cpuid() in the SMP case, or if instead, we are UP, in which case num_possible_cpus() is #defined as 1. We use num_possible_cpus() instead of num_online_cpus() to protect ourselves against the scenario of CPU hotplug, and we've taken down all the CPUs except one. Thanks to Jan Pogadl for initial report and analysis and Chen Gong for review. https://bugzilla.kernel.org/show_bug.cgi?id=16357 Reported-by: Jan Pogadl <pogadl.jan@googlemail.com>: Reviewed-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>