summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/acpica
AgeCommit message (Collapse)AuthorFilesLines
2022-05-21Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"Rafael J. Wysocki1-11/+0
Commit 6eaf08770ee8 ("ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms") made acpi_ex_system_do_sleep() log a warning for sleep times greater than 10 ms, but such sleep times are used in power management AML because of the PCI specification requirements. This results with logging warnings that cannot really be acted on in any useful way which is annoying and these warnings show up in the logs on many production systems, so revert commit 6eaf08770ee8. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit outputBob Moore1-2/+3
ACPICA commit 82a46ba57fe03ae99342740b92a04d8a8184860d %llu fails on 32-bit compilers. Link: https://github.com/acpica/acpica/commit/82a46ba5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: executer/exsystem: Fix some typo mistakesSelvarasu Ganesan1-3/+3
ACPICA commit 441747f1dcff770d692acbfd4d85b2cfaabdb38a Link: https://github.com/acpica/acpica/commit/441747f1 Signed-off-by: Selvarasu Ganesan <selvarasu.ganesan@arm.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: executer/exsystem: Warn about sleeps greater than 10 msPaul Menzel1-0/+10
ACPICA commit 2a0d1d475e7ea1c815bee1e0692d81db9a7c909c Quick boottime is important, so warn about sleeps greater than 10 ms. Distribution Linux kernels reach initrd in 350 ms, so excessive delays should be called out. 10 ms is chosen randomly, but three of such delays would already make up ten percent of the boottime. Link: https://github.com/acpica/acpica/commit/2a0d1d47 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: kernel test robot <lkp@intel.com>
2022-04-13ACPICA: executer/exsystem: Inform users about ACPI spec violationPaul Menzel1-0/+5
ACPICA commit 05ba545ce7859392250b18c10081db25c90ed8d7 Values greater than 100 microseconds violate the ACPI specification, so warn users about it. From ACPI Specification version 6.2 Errata A, 19.6.128 *Stall (Stall for a Short Time)*: > The implementation of Stall is OS-specific, but must not relinquish > control of the processor. Because of this, delays longer than 100 > microseconds must use Sleep instead of Stall. Link: https://github.com/acpica/acpica/commit/05ba545c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: kernel test robot <lkp@intel.com>
2022-04-13ACPICA: executer/exsystem: Add units to time variable namesPaul Menzel1-11/+11
ACPICA commit b69cbef7a83eadb102a1ff6c6f6fc5abce34805a `how_long` refers to different units in both functions, so make it more clear, what unit they expect. That also makes one comment superfluous. Link: https://github.com/acpica/acpica/commit/b69cbef7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Update copyright notices to the year 2022Bob Moore142-143/+143
ACPICA commit 738d7b0726e6c0458ef93c0a01c0377490888d1e Affects all source modules and utility signons. Link: https://github.com/acpica/acpica/commit/738d7b07 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Clean up double word in commentTom Rix2-2/+2
ACPICA commit 01f43b049722fa7613fca3c9fa657b150fae8ac1 Remove the second 'know' and 'than'. Link: https://github.com/acpica/acpica/commit/01f43b04 Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Add new ACPI 6.4 semantics for LoadTable() operatorBob Moore1-7/+17
ACPICA commit b32dde35e26a63a85d78d4dc0a7260b61e626ac1 DDB_HANDLE is gone, now LoadTable() returns a pass/fail integer. Link: https://github.com/acpica/acpica/commit/b32dde35 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Add new ACPI 6.4 semantics to the Load() operatorBob Moore4-19/+43
ACPICA commit 84bf573ab7222c4e1c22167b22d29c4da1552b20 DDB_HANDLE is gone, now Load() returns a pass/fail integer, as well as storing it in an optional 2nd argument. Link: https://github.com/acpica/acpica/commit/84bf573a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Add support for the Windows 11 _OSI stringMario Limonciello1-0/+1
ACPICA commit f2e9fb8345b9146a67f8c63474b65ccfc06d962a See https://github.com/microsoft_docs/windows-driver-docs/commit/a061e31fd77c20cc8e6eb0234e5d3a83e417f48 Link: https://github.com/acpica/acpica/commit/f2e9fb83 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-07ACPICA: Avoid walking the ACPI Namespace if it is not thereRafael J. Wysocki1-0/+3
ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL. For instance, this can happen if the kernel is run with "acpi=off" in the command line. Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/ Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Fixed a couple of warnings under MSVCBob Moore1-2/+2
ACPICA commit 86c919d2bad08491fc91ffa53e9b169092de8622 Repaired with casts. Link: https://github.com/acpica/acpica/commit/86c919d2 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)Bob Moore1-1/+1
ACPICA commit ff803279dde7a3e068a6a698d8c69503cd159ad7 To simply return (AE_BAD_PARAMETER); to fix compilation on MSVC. Link: https://github.com/acpica/acpica/commit/ff803279 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5Kirill A. Shutemov3-4/+6
ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e According to ACPI 6.4, Section 16.2, the CPU cache flushing is required on entering to S1, S2, and S3, but the ACPICA code flushes the CPU cache regardless of the sleep state. Blind cache flush on entering S5 causes problems for TDX. Flushing happens with WBINVD that is not supported in the TDX environment. TDX only supports S5 and adjusting ACPICA code to conform to the spec more strictly fixes the issue. Link: https://github.com/acpica/acpica/commit/3dd7e1f3 Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Add support for PCC Opregion special context dataSudeep Holla1-0/+10
ACPICA commit 55526e8a6133cbf5a9cc0fb75a95dbbac6eb98e6 PCC Opregion added in ACPIC 6.3 requires special context data similar to GPIO and Generic Serial Bus as it needs to know the internal PCC buffer and its length as well as the PCC channel index when the opregion handler is being executed by the OSPM. Lets add support for the special context data needed by PCC Opregion. Link: https://github.com/acpica/acpica/commit/55526e8a Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Fix wrong interpretation of PCC addressSudeep Holla1-6/+1
ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c With the PCC Opregion in the firmware and we are hitting below kernel crash: -->8 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Workqueue: pm pm_runtime_work pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x54/0x260 lr : acpi_ex_write_data_to_field+0xb8/0x194 Call trace: __memcpy+0x54/0x260 acpi_ex_store_object_to_node+0xa4/0x1d4 acpi_ex_store+0x44/0x164 acpi_ex_opcode_1A_1T_1R+0x25c/0x508 acpi_ds_exec_end_op+0x1b4/0x44c acpi_ps_parse_loop+0x3a8/0x614 acpi_ps_parse_aml+0x90/0x2f4 acpi_ps_execute_method+0x11c/0x19c acpi_ns_evaluate+0x1ec/0x2b0 acpi_evaluate_object+0x170/0x2b0 acpi_device_set_power+0x118/0x310 acpi_dev_suspend+0xd4/0x180 acpi_subsys_runtime_suspend+0x28/0x38 __rpm_callback+0x74/0x328 rpm_suspend+0x2d8/0x624 pm_runtime_work+0xa4/0xb8 process_one_work+0x194/0x25c worker_thread+0x260/0x49c kthread+0x14c/0x30c ret_from_fork+0x10/0x20 Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026) ---[ end trace 24d8a032fa77b68a ]--- The reason for the crash is that the PCC channel index passed via region.address in acpi_ex_store_object_to_node is interpreted as the channel subtype incorrectly. Assuming the PCC op_region support is not used by any other type, let us remove the subtype check as the AML has no access to the subtype information. Once we remove it, the kernel crash disappears and correctly complains about missing PCC Opregion handler. ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130) ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261) ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531) Link: https://github.com/acpica/acpica/commit/41be6afa Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()Rafael J. Wysocki1-1/+2
ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class, acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to obtain return_desc which may require additional resolution with the help of acpi_ex_read_data_from_field (). If the latter fails, the reference counter of the original return_desc is decremented which is incorrect, because acpi_ns_get_attached_object () does not increment the reference counter of the object returned by it. This issue may lead to premature deletion of the attached object while it is still attached and a use-after-free and crash in the host OS. For example, this may happen when on evaluation of ref_of() a local region field where there is no registered handler for the given Operation Region. Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away after a acpi_ex_read_data_from_field () failure. Link: https://github.com/acpica/acpica/commit/d984f120 Link: https://github.com/acpica/acpica/pull/685 Reported-by: Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Utilities: Avoid deleting the same object twice in a rowRafael J. Wysocki1-0/+1
ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687 If original_count is 0 in acpi_ut_update_ref_count (), acpi_ut_delete_internal_obj () is invoked for the target object, which is incorrect, because that object has been deleted once already and the memory allocated to store it may have been reclaimed and allocated for a different purpose by the host OS. Moreover, a confusing debug message following the "Reference Count is already zero, cannot decrement" warning is printed in that case. To fix this issue, make acpi_ut_update_ref_count () return after finding that original_count is 0 and printing the above warning. Link: https://github.com/acpica/acpica/commit/c11af67d Link: https://github.com/acpica/acpica/pull/652 Reported-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Avoid subobject buffer overflow when validating RSDP signatureJessica Clarke1-1/+2
ACPICA commit 6bb72909c1e3d415aee214104a01bc9834b2d4ce Since the Signature member is accessed through an struct acpi_table_header, the pointer to it is only to a 4-char array, and so trying to read past the 4th character, as will be done when it is an RSDP, reads beyond the bounds of the accessed member. On CHERI, and thus Arm's experimental Morello prototype architecture, pointers are represented as capabilities, which are unforgeable bounded pointers, providing always-on fine-grained spatial memory safety. By default, subobject bounds enforcement is not enabled, only bounds on allocations, but it is enabled in the cheri_BSD (a port of free_BSD) kernel as intra-object overflow attacks are common on operating system kernels, and so this overflow is detected there and traps. Link: https://github.com/acpica/acpica/commit/6bb72909 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Use original pointer for virtual origin tablesJessica Clarke7-55/+123
ACPICA commit dfa3feffa8f760b686207d09dc880cd2f26c72af Currently the pointer to the table is cast to acpi_physical_address and later cast back to a pointer to be dereferenced. Whether or not this is supported is implementation-defined. On CHERI, and thus Arm's experimental Morello prototype architecture, pointers are represented as capabilities, which are unforgeable bounded pointers, providing always-on fine-grained spatial memory safety. This means that any pointer cast to a plain integer will lose all its associated metadata, and when cast back to a pointer it will give a null-derived pointer (one that has the same metadata as null but an address equal to the integer) that will trap on any dereference. As a result, this is an implementation where acpi_physical_address cannot be used as a hack to store real pointers. Thus, alter the lifecycle of table descriptors. Internal physical tables keep the current behaviour where only the address is set on install, and the pointer is set on acquire. Virtual tables (internal and external) now store the pointer on initialisation and use that on acquire (which will redundantly set *table_ptr to itself, but changing that is both unnecessary and overly complicated as acpi_tb_acquire_table is called with both a pointer to a variable and a pointer to Table->Pointer itself). This requires propagating the (possible) table pointer everywhere in order to make sure pointers make it through to acpi_tb_acquire_temp_table, which requires a change to the acpi_install_table interface. Instead of taking an ACPI_PHYSADDR_TYPE and a boolean indicating whether it's physical or virtual, it is now split into acpi_install_table (that takes an external virtual table pointer) and acpi_install_physical_table (that takes an ACPI_PHYSADDR_TYPE for an internal physical table address). This also has the benefit of providing a cleaner API. Link: https://github.com/acpica/acpica/commit/dfa3feff Signed-off-by: Bob Moore <robert.moore@intel.com> [ rjw: Adjust the code in tables.c to match interface changes ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-27ACPICA: Use original data_table_region pointer for accessesJessica Clarke7-5/+72
ACPICA commit d9eb82bd7515989f0b29d79deeeb758db4d6529c Currently the pointer to the table is cast to acpi_physical_address and later cast back to a pointer to be dereferenced. Whether or not this is supported is implementation-defined. On CHERI, and thus Arm's experimental Morello prototype architecture, pointers are represented as capabilities, which are unforgeable bounded pointers, providing always-on fine-grained spatial memory safety. This means that any pointer cast to a plain integer will lose all its associated metadata, and when cast back to a pointer it will give a null-derived pointer (one that has the same metadata as null but an address equal to the integer) that will trap on any dereference. As a result, this is an implementation where acpi_physical_address cannot be used as a hack to store real pointers. Thus, add a new field to struct acpi_object_region to store the pointer for table regions, and propagate it to acpi_ex_data_table_space_handler via the region context, to use a more portable implementation that supports CHERI. Link: https://github.com/acpica/acpica/commit/d9eb82bd Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05ACPICA: Add support for Windows 2020 _OSI stringMario Limonciello1-0/+1
ACPICA commit 2dc55de56d2deac30af0b484dd1d65607eb33a9c Link: https://github.com/microsoft_docs/windows-driver-docs/commit/5164e24985e78ef4870d7a5801a5336104f36366 Link: https://github.com/acpica/acpica/commit/2dc55de5 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05ACPICA: Avoid evaluating methods too early during system resumeRafael J. Wysocki4-13/+15
ACPICA commit 0762982923f95eb652cf7ded27356b247c9774de During wakeup from system-wide sleep states, acpi_get_sleep_type_data() is called and it tries to get memory from the slab allocator in order to evaluate a control method, but if KFENCE is enabled in the kernel, the memory allocation attempt causes an IRQ work to be queued and a self-IPI to be sent to the CPU running the code which requires the memory controller to be ready, so if that happens too early in the wakeup path, it doesn't work. Prevent that from taking place by calling acpi_get_sleep_type_data() for S0 upfront, when preparing to enter a given sleep state, and saving the data obtained by it for later use during system wakeup. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214271 Reported-by: Reik Keutterling <spielkind@gmail.com> Tested-by: Reik Keutterling <spielkind@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-16ACPICA: Fix an if statement (add parens)Bob Moore1-3/+2
ACPICA commit 4dbe4b9a0c203b04918705f022e0db997aa55696 Link: https://github.com/acpica/acpica/commit/4dbe4b9a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-03Revert "ACPICA: Fix memory leak caused by _CID repair function"Rafael J. Wysocki1-7/+0
Revert commit c27bac0314131 ("ACPICA: Fix memory leak caused by _CID repair function") which is reported to cause a boot issue on Acer Swift 3 (SF314-51). Reported-by: Adrien Precigout <dev@asdrip.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07ACPICA: Add support for PlatformRtMechanism OperationRegion handlerErik Kaneda4-2/+61
ACPICA commit cdf48b141d7da38e47fe4020310033ddd1971f9e Writing a buffer to a PlatformRtMechanism FieldUnit invokes a bidirectional transaction. The input buffer contains 26 bytes containing 9 bytes of status, a command byte and a 16-byte UUID. This change will will simply pass this incoming buffer to a handler registered by the OS. Link: https://github.com/acpica/acpica/commit/cdf48b14 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07ACPICA: Use ACPI_FALLTHROUGHWei Ming Chen1-1/+1
ACPICA commit 2296edd39b4ce2d2dd691c1f309c4da00843ecc9 Replace /* FALLTHROUGH */ comment with ACPI_FALLTHROUGH Link: https://github.com/acpica/acpica/commit/2296edd3 Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07ACPICA: Fix memory leak caused by _CID repair functionErik Kaneda1-0/+7
ACPICA commit 180cb53963aa876c782a6f52cc155d951b26051a According to the ACPI spec, _CID returns a package containing hardware ID's. Each element of an ASL package contains a reference count from the parent package as well as the element itself. Name (TEST, Package() { "String object" // this package element has a reference count of 2 }) A memory leak was caused in the _CID repair function because it did not decrement the reference count created by the package. Fix the memory leak by calling acpi_ut_remove_reference on _CID package elements that represent a hardware ID (_HID). Link: https://github.com/acpica/acpica/commit/180cb539 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-31ACPICA: Clean up context mutex during object deletionErik Kaneda1-0/+8
ACPICA commit bc43c878fd4ff27ba75b1d111b97ee90d4a82707 Fixes: c27f3d011b08 ("Fix race in GenericSerialBus (I2C) and GPIO OpRegion parameter handling") Link: https://github.com/acpica/acpica/commit/bc43c878 Reported-by: John Garry <john.garry@huawei.com> Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CSI2Bus resource templateBob Moore12-7/+175
This commit the result of squashing the following: ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c Link: https://github.com/acpica/acpica/commit/21a316fd Link: https://github.com/acpica/acpica/commit/f5506fc7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CXL ACPI device ID and _CBR objectErik Kaneda1-0/+4
ACPICA commit 7f634ac53fe1e480c01ceff7532cd8dc6430f1b9 The ACPI device ID represents the CXL host bridge. _CBR objects gets the memory location of CXL Host Bridge Registers. Link: https://github.com/acpica/acpica/commit/7f634ac5 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: Add new predefined objects _BPC, _BPS, and _BPTErik Kaneda1-0/+11
ACPICA commit 3cfef24ae2d98babbbfbe4ba612a2f5d9014d3ba The object definition for these can be found in the ACPI 6.4 specification. Link: https://github.com/acpica/acpica/commit/3cfef24a Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-24ACPICA: Always create namespace nodes using acpi_ns_create_node()Vegard Nossum1-2/+1
ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329 ACPI is allocating an object using kmalloc(), but then frees it using kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong and can lead to boot failures manifesting like this: hpet0: 3 comparators, 64-bit 100.000000 MHz counter clocksource: Switched to clocksource tsc-early BUG: unable to handle page fault for address: 000000003ffe0018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b 20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b 1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20 RSP: 0000:ffffc90000013df8 EFLAGS: 00010206 RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002 RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300 RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001 R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000 R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80 FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __trace_define_field+0x33/0xa0 event_trace_init+0xeb/0x2b4 tracer_init_tracefs+0x60/0x195 ? register_tracer+0x1e7/0x1e7 do_one_initcall+0x74/0x160 kernel_init_freeable+0x190/0x1f0 ? rest_init+0x9a/0x9a kernel_init+0x5/0xf6 ret_from_fork+0x35/0x40 CR2: 000000003ffe0018 ---[ end trace 707efa023f2ee960 ]--- RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Bisection leads to unrelated changes in slab; Vlastimil Babka suggests an unrelated layout or slab merge change merely exposed the underlying bug. Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/ Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com Link: https://github.com/acpica/acpica/commit/29da9a2a Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace") Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Diagnosed-by: Vlastimil Babka <vbabka@suse.cz> Diagnosed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Remove some code duplication from acpi_ev_address_space_dispatchHans de Goede1-18/+5
ACPICA commit 383f50ff8cb7424ca16a6c0234f103b41d4a783e The handling of the space_id == ACPI_ADR_SPACE_GSBUS and space_id == ACPI_ADR_SPACE_GPIO cases is almost identical, fold the 2 cases into 1 to remove some code duplication. Link: https://github.com/acpica/acpica/commit/383f50ff Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter ↵Hans de Goede4-17/+57
handling ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61 The handling of the generic_serial_bus (I2C) and GPIO op_regions in acpi_ev_address_space_dispatch() passes a number of extra parameters to the address-space handler through the address-space Context pointer (instead of using more function parameters). The Context is shared between threads, so if multiple threads try to call the handler for the same address-space at the same time, then a second thread could change the parameters of a first thread while the handler is running for the first thread. An example of this race hitting is the Lenovo Yoga Tablet2 1015L, where there are both attrib_bytes accesses and attrib_byte accesses to the same address-space. The attrib_bytes access stores the number of bytes to transfer in Context->access_length. Where as for the attrib_byte access the number of bytes to transfer is always 1 and field_obj->Field.access_length is unused (so 0). Both types of accesses racing from different threads leads to the following problem: 1. Thread a. starts an attrib_bytes access, stores a non 0 value from field_obj->Field.access_length in Context->access_length 2. Thread b. starts an attrib_byte access, stores 0 in Context->access_length 3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE and calls acpi_gsb_i2c_read_bytes(..., Context->access_length) 4. At this point Context->access_length is 0 (set by thread b.) rather then the field_obj->Field.access_length value from thread a. This 0 length reads leads to the following errors being logged: i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read) i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95 Note this is just an example of the problems which this race can cause. There are likely many more (sporadic) problems caused by this race. This commit adds a new context_mutex to struct acpi_object_addr_handler and makes acpi_ev_address_space_dispatch() take that mutex when using the shared Context to pass extra parameters to an address-space handler, fixing this race. Note the new mutex must be taken *after* exiting the interpreter, therefor the existing acpi_ex_exit_interpreter() call is moved to above the code which stores the extra parameters in the Context. Link: https://github.com/acpica/acpica/commit/c9e01169 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-10Merge back ACPICA material for v5.12.Rafael J. Wysocki146-164/+162
2021-02-08Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"Ard Biesheuvel1-4/+13
This reverts commit 32cf1a12cad43358e47dac8014379c2f33dfbed4. The 'exisitng buffer' in this case is the firmware provided table, and we should not modify that in place. This fixes a crash on arm64 with initrd table overrides, in which case the DSDT is not mapped with read/write permissions. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: Updated all copyrights to 2021Bob Moore142-143/+143
This affects all ACPICA source code modules. ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4 Link: https://github.com/acpica/acpica/commit/c570953c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: add type casts for string functionsBob Moore2-4/+4
Detected by gcc 10.2.0. ACPICA commit 608559800e1ad48b819744aeb1866d94335e2655 Link: https://github.com/acpica/acpica/commit/60855980 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: fix -WfallthroughNick Desaulniers9-12/+11
ACPICA commit 4b9135f5774caa796ddf826448811e8e7f08ef2f GCC 7.1 gained -Wimplicit-fallthrough to warn on implicit fallthrough, as well as __attribute__((__fallthrough__)) and comments to explicitly denote that cases of fallthrough were intentional. Clang also supports this warning and statement attribute, but not the comment form. Robert Moore provides additional context about the lint comments being removed. They were for "an old version of PC-Lint, which we don't use anymore." Drop those. This will help us enable -Wimplicit-fallthrough throughout the Linux kernel. Suggested-by: Robert Moore <robert.moore@intel.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Link: https://github.com/acpica/acpica/commit/4b9135f5 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-18ACPICA: Clean up exception code class checksMaximilian Luz4-5/+4
ACPICA commit 5a8390fbd4c5c60da0b6d4ba53b5ee34fda9a0cb With the exception code class check macros fixed in the previous commit, let us now use those to simplify exception class checks across ACPICA. Link: https://github.com/acpica/acpica/commit/5a8390fb Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Interpreter: fix memory leak by using existing bufferErik Kaneda1-13/+4
ACPICA commit 52d1da5dcbd79a722b70f02a1a83f04088f51ff6 There was a memory leak that ocurred when a _CID object is defined as a package containing string objects. When _CID is checked for any possible repairs, it calls a helper function to repair _HID (because _CID basically contains multiple _HID entries). The _HID repair function assumes that string objects are standalone objects that are not contained inside of any packages. The _HID repair function replaces the string object with a brand new object and attempts to delete the old object by decrementing the reference count of the old object. Strings inside of packages have a reference count of 2 so the _HID repair function leaves this object in a dangling state and causes a memory leak. Instead of allocating a brand new object and removing the old object, use the existing object when repairing the _HID object. Link: https://github.com/acpica/acpica/commit/52d1da5d Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Add function trace macros to improve debuggingErik Kaneda3-32/+40
ACPICA commit 87b8dba05b4cf8c111948327023c710e2b6b5a05 The namespace repair mechanism does not have function tracing macros. Add several trace macros to improve debuggability. Link: https://github.com/acpica/acpica/commit/87b8dba0 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Also handle "orphan" _REG methods for GPIO OpRegionsHans de Goede1-27/+27
ACPICA commit b9dc31e2fc67cf196fab5253a9a673bee68b2ef5 Before this commit acpi_ev_execute_reg_methods() had special handling to handle "orphan" (no matching op_region declared) _REG methods for EC nodes. On Intel Cherry Trail devices there are 2 possible ACPI op_regions for accessing GPIOs. The standard general_purpose_io op_region and the Cherry Trail specific user_defined 0x9X op_regions. Having 2 different types of op_regions leads to potential issues with checks for op_region availability, or in other words checks if _REG has been called for the op_region which the ACPI code wants to use. Except for the "orphan" EC handling, ACPICA core does not call _REG on an ACPI node which does not define an op_region matching the type being registered; and the reference design DSDT, from which most Cherry Trail DSDTs are derived, does not define general_purpose_io, nor user_defined(0x93) op_regions for the GPO2 (UID 3) device, because no pins were assigned ACPI controlled functions in the reference design. Together this leads to the perfect storm, at least on the Cherry Trail based Medion Akayo E1239T. This design does use a GPO2 pin from its ACPI code and has added the Cherry Trail specific user_defined(0x93) opregion to its GPO2 ACPI node to access this pin. But it uses a has _REG been called availability check for the standard general_purpose_io op_region. This clearly is a bug in the DSDT, but this does work under Windows. This issue leads to the intel_vbtn driver reporting the device always being in tablet-mode at boot, even if it is in laptop mode. Which in turn causes userspace to ignore touchpad events. So iow this issues causes the touchpad to not work at boot. This commit fixes this by extending the "orphan" _REG method handling to also apply to GPIO address-space handlers. Note it seems that Windows always calls "orphan" _REG methods so me may want to consider dropping the space-id check and always do "orphan" _REG method handling. Link: https://github.com/acpica/acpica/commit/b9dc31e2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Remove extreaneous "the" in commentsColin Ian King1-1/+1
ACPICA commit f6eae3961bf39ad8beda70c001d1815780600e39 There are several ocurrances of "the the", remove the extraneous "the". Link: https://github.com/acpica/acpica/commit/f6eae396 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-19ACPICA: Add missing type casts in GPE register access codeRafael J. Wysocki1-2/+2
Type casts needed on 32-bit systems are missing in two places in the GPE register access code, so add them. Fixes: 7a8379eb41a4 ("ACPICA: Add support for using logical addresses of GPE blocks") Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08Merge back earlier ACPICA-related changes for 5.10.Rafael J. Wysocki8-34/+175
2020-10-08ACPICA: Remove unnecessary semicolonBob Moore1-1/+1
ACPICA commit 02ffcba2af123a891eefbaed4d37780ba1e36ccc Reported by: Zou Wei. Link: https://github.com/acpica/acpica/commit/02ffcba2 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08ACPICA: Debugger: Add a new command: "ALL <NameSeg>"Bob Moore4-34/+188
This command will execute/evaluate all objects with a match to the <NameSeg> argument. ACPICA commit a1a32ec054f067d1617067e2bafb0a27a8728e07 Link: https://github.com/acpica/acpica/commit/a1a32ec0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>