summaryrefslogtreecommitdiffstats
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2020-06-10Merge branch 'rwonce/rework' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
2020-05-28crypto: engine - do not requeue in case of fatal errorIuliana Prodan1-4/+1
Now, in crypto-engine, if hardware queue is full (-ENOSPC), requeue request regardless of MAY_BACKLOG flag. If hardware throws any other error code (like -EIO, -EINVAL, -ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into crypto-engine's queue, since the others can be dropped. The latter case can be fatal error, so those cannot be recovered from. For example, in CAAM driver, -EIO is returned in case the job descriptor is broken, so there is no possibility to fix the job descriptor. Therefore, these errors might be fatal error, so we shouldn’t requeue the request. This will just be pass back and forth between crypto-engine and hardware. Fixes: 6a89f492f8e5 ("crypto: engine - support for parallel requests based on retry mechanism") Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-15crypto: blake2b - Fix clang optimization for ARMv7-MArnd Bergmann1-1/+3
When building for ARMv7-M, clang-9 or higher tries to unroll some loops, which ends up confusing the register allocator to the point of generating rather bad code and using more than the warning limit for stack frames: warning: stack frame size of 1200 bytes in function 'blake2b_compress' [-Wframe-larger-than=] Forcing it to not unroll the final loop avoids this problem. Fixes: 91d689337fe8 ("crypto: blake2b - add blake2b generic implementation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: lib/sha1 - fold linux/cryptohash.h into crypto/sha.hEric Biggers1-1/+0
<linux/cryptohash.h> sounds very generic and important, like it's the header to include if you're doing cryptographic hashing in the kernel. But actually it only includes the library implementation of the SHA-1 compression function (not even the full SHA-1). This should basically never be used anymore; SHA-1 is no longer considered secure, and there are much better ways to do cryptographic hashing in the kernel. Remove this header and fold it into <crypto/sha.h> which already contains constants and functions for SHA-1 (along with SHA-2). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: lib/sha1 - rename "sha" to "sha1"Eric Biggers1-2/+2
The library implementation of the SHA-1 compression function is confusingly called just "sha_transform()". Alongside it are some "SHA_" constants and "sha_init()". Presumably these are left over from a time when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and moreover SHA-1 is now considered insecure and thus shouldn't be used. Therefore, rename these functions and constants to make it very clear that they are for SHA-1. Also add a comment to make it clear that these shouldn't be used. For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that it matches the same definition in <crypto/sha.h>. This prepares for merging <linux/cryptohash.h> into <crypto/sha.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: essiv - use crypto_shash_tfm_digest()Eric Biggers1-3/+1
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: hash - introduce crypto_shash_tfm_digest()Eric Biggers1-0/+16
Currently the simplest use of the shash API is to use crypto_shash_digest() to digest a whole buffer. However, this still requires allocating a hash descriptor (struct shash_desc). Many users don't really want to preallocate one and instead just use a one-off descriptor on the stack like the following: { SHASH_DESC_ON_STACK(desc, tfm); int err; desc->tfm = tfm; err = crypto_shash_digest(desc, data, len, out); shash_desc_zero(desc); } Wrap this in a new helper function crypto_shash_tfm_digest() that can be used instead of the above. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: lib/sha256 - return voidEric Biggers1-5/+9
The SHA-256 / SHA-224 library functions can't fail, so remove the useless return value. Also long as the declarations are being changed anyway, also fix some parameter names in the declarations to match the definitions. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto - Avoid free() namespace collisionArnd Bergmann2-6/+6
gcc-10 complains about using the name of a standard library function in the kernel, as we are not building with -ffreestanding: crypto/xts.c:325:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 325 | static void free(struct skcipher_instance *inst) | ^~~~ crypto/lrw.c:290:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 290 | static void free(struct skcipher_instance *inst) | ^~~~ crypto/lrw.c:27:1: note: 'free' is declared in header '<stdlib.h>' The xts and lrw cipher implementations run into this because they do not use the conventional namespaced function names. It might be better to rename all local functions in those files to help with things like 'ctags' and 'grep', but just renaming these two avoids the build issue. I picked the more verbose crypto_xts_free() and crypto_lrw_free() names for consistency with several other drivers that do use namespaced function names. Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher") Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: drbg - fix error return code in drbg_alloc_state()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the kzalloc error handling case instead of 0, as done elsewhere in this function. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: db07cd26ac6a ("crypto: drbg - add FIPS 140-2 CTRNG for noise source") Cc: <stable@vger.kernel.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: engine - support for batch requestsIuliana Prodan1-1/+26
Added support for batch requests, per crypto engine. A new callback is added, do_batch_requests, which executes a batch of requests. This has the crypto_engine structure as argument (for cases when more than one crypto-engine is used). The crypto_engine_alloc_init_and_set function, initializes crypto-engine, but also, sets the do_batch_requests callback. On crypto_pump_requests, if do_batch_requests callback is implemented in a driver, this will be executed. The link between the requests will be done in driver, if possible. do_batch_requests is available only if the hardware has support for multiple request. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: engine - support for parallel requests based on retry mechanismIuliana Prodan1-30/+116
Added support for executing multiple requests, in parallel, for crypto engine based on a retry mechanism. If hardware was unable to execute a backlog request, enqueue it back in front of crypto-engine queue, to keep the order of requests. A new variable is added, retry_support (this is to keep the backward compatibility of crypto-engine) , which keeps track whether the hardware has support for retry mechanism and, also, if can run multiple requests. If do_one_request() returns: >= 0: hardware executed the request successfully; < 0: this is the old error path. If hardware has support for retry mechanism, the request is put back in front of crypto-engine queue. For backwards compatibility, if the retry support is not available, the crypto-engine will work as before. If hardware queue is full (-ENOSPC), requeue request regardless of MAY_BACKLOG flag. If hardware throws any other error code (like -EIO, -EINVAL, -ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into crypto-engine's queue, since the others can be dropped. The new crypto_engine_alloc_init_and_set function, initializes crypto-engine, sets the maximum size for crypto-engine software queue (not hardcoded anymore) and the retry_support variable is set, by default, to false. On crypto_pump_requests(), if do_one_request() returns >= 0, a new request is send to hardware, until there is no space in hardware and do_one_request() returns < 0. By default, retry_support is false and crypto-engine will work as before - will send requests to hardware, one-by-one, on crypto_pump_requests(), and complete it, on crypto_finalize_request(), and so on. To support multiple requests, in each driver, retry_support must be set on true, and if do_one_request() returns an error the request must not be freed, since it will be enqueued back into crypto-engine's queue. When all drivers, that use crypto-engine now, will be updated for retry mechanism, the retry_support variable can be removed. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: algapi - create function to add request in front of queueIuliana Prodan1-0/+8
Add crypto_enqueue_request_head function that enqueues a request in front of queue. This will be used in crypto-engine, on error path. In case a request was not executed by hardware, enqueue it back in front of queue (to keep the order of requests). Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-30crypto: drbg - should select CTRCorentin Labbe1-1/+1
if CRYPTO_DRBG_CTR is builtin and CTR is module, allocating such algo will fail. DRBG: could not allocate CTR cipher TFM handle: ctr(aes) alg: drbg: Failed to reset rng alg: drbg: Test 0 failed for drbg_pr_ctr_aes128 DRBG: could not allocate CTR cipher TFM handle: ctr(aes) alg: drbg: Failed to reset rng alg: drbg: Test 0 failed for drbg_nopr_ctr_aes128 DRBG: could not allocate CTR cipher TFM handle: ctr(aes) alg: drbg: Failed to reset rng alg: drbg: Test 0 failed for drbg_nopr_ctr_aes192 DRBG: could not allocate CTR cipher TFM handle: ctr(aes) alg: drbg: Failed to reset rng alg: drbg: Test 0 failed for drbg_nopr_ctr_aes256 So let's select CTR instead of just depend on it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-30crypto: ctr - no longer needs CRYPTO_SEQIVCorentin Labbe1-1/+0
As comment of the v2, Herbert said: "The SEQIV select from CTR is historical and no longer necessary." So let's get rid of it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-24crypto: drbg - always seeded with SP800-90B compliant noise sourceStephan Müller1-7/+19
As the Jitter RNG provides an SP800-90B compliant noise source, use this noise source always for the (re)seeding of the DRBG. To make sure the DRBG is always properly seeded, the reseed threshold is reduced to 1<<20 generate operations. The Jitter RNG may report health test failures. Such health test failures are treated as transient as follows. The DRBG will not reseed from the Jitter RNG (but from get_random_bytes) in case of a health test failure. Though, it produces the requested random number. The Jitter RNG has a failure counter where at most 1024 consecutive resets due to a health test failure are considered as a transient error. If more consecutive resets are required, the Jitter RNG will return a permanent error which is returned to the caller by the DRBG. With this approach, the worst case reseed threshold is significantly lower than mandated by SP800-90A in order to seed with an SP800-90B noise source: the DRBG has a reseed threshold of 2^20 * 1024 = 2^30 generate requests. Yet, in case of a transient Jitter RNG health test failure, the DRBG is seeded with the data obtained from get_random_bytes. However, if the Jitter RNG fails during the initial seeding operation even due to a health test error, the DRBG will send an error to the caller because at that time, the DRBG has received no seed that is SP800-90B compliant. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-24crypto: jitter - SP800-90B complianceStephan Müller2-101/+343
SP800-90B specifies various requirements for the noise source(s) that may seed any DRNG including SP800-90A DRBGs. In November 2020, SP800-90B will be mandated for all noise sources that provide entropy to DRBGs as part of a FIPS 140-[2|3] validation or other evaluation types. Without SP800-90B compliance, a noise source is defined to always deliver zero bits of entropy. This patch ports the SP800-90B compliance from the user space Jitter RNG version 2.2.0. The following changes are applied: - addition of (an enhanced version of) the repetitive count test (RCT) from SP800-90B section 4.4.1 - the enhancement is due to the fact of using the stuck test as input to the RCT. - addition of the adaptive proportion test (APT) from SP800-90B section 4.4.2 - update of the power-on self test to perform a test measurement of 1024 noise samples compliant to SP800-90B section 4.3 - remove of the continuous random number generator test which is replaced by APT and RCT Health test failures due to the SP800-90B operation are only enforced in FIPS mode. If a runtime health test failure is detected, the Jitter RNG is reset. If more than 1024 resets in a row are performed, a permanent error is returned to the caller. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-24crypto: algif_rng - remove redundant assignment to variable errColin Ian King1-1/+1
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-16crypto: api - Fix use-after-free and race in crypto_spawn_algHerbert Xu3-7/+19
There are two problems in crypto_spawn_alg. First of all it may return spawn->alg even if spawn->dead is set. This results in a double-free as detected by syzbot. Secondly the setting of the DYING flag is racy because we hold the read-lock instead of the write-lock. We should instead call crypto_shoot_alg in a safe manner by gaining a refcount, dropping the lock, and then releasing the refcount. This patch fixes both problems. Reported-by: syzbot+fc0674cde00b66844470@syzkaller.appspotmail.com Fixes: 4f87ee118d16 ("crypto: api - Do not zap spawn->alg") Fixes: 73669cc55646 ("crypto: api - Fix race condition in...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-16crypto: algapi - Avoid spurious modprobe on LOADEDEric Biggers1-1/+1
Currently after any algorithm is registered and tested, there's an unnecessary request_module("cryptomgr") even if it's already loaded. Also, CRYPTO_MSG_ALG_LOADED is sent twice, and thus if the algorithm is "crct10dif", lib/crc-t10dif.c replaces the tfm twice rather than once. This occurs because CRYPTO_MSG_ALG_LOADED is sent using crypto_probing_notify(), which tries to load "cryptomgr" if the notification is not handled (NOTIFY_DONE). This doesn't make sense because "cryptomgr" doesn't handle this notification. Fix this by using crypto_notify() instead of crypto_probing_notify(). Fixes: dd8b083f9a5e ("crypto: api - Introduce notifier for new crypto algorithms") Cc: <stable@vger.kernel.org> # v4.20+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-15compiler/gcc: Raise minimum GCC version for kernel builds to 4.8Will Deacon1-1/+0
It is very rare to see versions of GCC prior to 4.8 being used to build the mainline kernel. These old compilers are also know to have codegen issues which can lead to silent miscompilation: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 Raise the minimum GCC version for kernel build to 4.8 and remove some tautological Kconfig dependencies as a consequence. Cc: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-04-01Merge branch 'linus' of ↵Linus Torvalds18-267/+149
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ...
2020-03-30crypto: af_alg - bool type cosmeticsLothar Rubusch2-8/+8
When working with bool values the true and false definitions should be used instead of 1 and 0. Hopefully I fixed my mailer and apologize for that. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-12crypto: testmgr - do comparison tests before inauthentic input testsEric Biggers1-2/+2
Do test_aead_vs_generic_impl() before test_aead_inauthentic_inputs() so that any differences with the generic driver are detected before getting to the inauthentic input tests, which intentionally use only the driver being tested (so that they run even if a generic driver is unavailable). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-12crypto: testmgr - use consistent IV copies for AEADs that need itEric Biggers1-9/+15
rfc4543 was missing from the list of algorithms that may treat the end of the AAD buffer specially. Also, with rfc4106, rfc4309, rfc4543, and rfc7539esp, the end of the AAD buffer is actually supposed to contain a second copy of the IV, and we've concluded that if the IV copies don't match the behavior is implementation-defined. So, the fuzz tests can't easily test that case. So, make the fuzz tests only use inputs where the two IV copies match. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 40153b10d91c ("crypto: testmgr - fuzz AEADs against their generic implementation") Cc: Stephan Mueller <smueller@chronox.de> Originally-from: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: xts - simplify error handling in ->create()Eric Biggers1-17/+11
Simplify the error handling in the XTS template's ->create() function by taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: rsa-pkcs1pad - simplify error handling in pkcs1pad_create()Eric Biggers1-39/+20
Simplify the error handling in pkcs1pad_create() by taking advantage of crypto_grab_akcipher() now handling an ERR_PTR() name and by taking advantage of crypto_drop_akcipher() now accepting (as a no-op) a spawn that hasn't been grabbed yet. While we're at it, also simplify the way the hash_name optional argument is handled. We only need to check whether it's present in one place, and we can just assign directly to ctx->digest_info. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: pcrypt - simplify error handling in pcrypt_create_aead()Eric Biggers1-24/+9
Simplify the error handling in pcrypt_create_aead() by taking advantage of crypto_grab_aead() now handling an ERR_PTR() name and by taking advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that hasn't been grabbed yet. This required also making padata_free_shell() accept a NULL argument. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: lrw - simplify error handling in create()Eric Biggers1-17/+11
Simplify the error handling in the LRW template's ->create() function by taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: geniv - simply error handling in aead_geniv_alloc()Eric Biggers1-12/+5
Simplify the error handling in aead_geniv_alloc() by taking advantage of crypto_grab_aead() now handling an ERR_PTR() name and by taking advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: gcm - simplify error handling in crypto_rfc4543_create()Eric Biggers1-25/+12
Simplify the error handling in crypto_rfc4543_create() by taking advantage of crypto_grab_aead() now handling an ERR_PTR() name and by taking advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Conveniently, this eliminates the 'ccm_name' variable which was incorrectly named (it should have been 'gcm_name'). Also fix a weird case where a line was terminated by a comma rather than a semicolon, causing the statement to be continued on the next line. Fortunately the code still behaved as intended, though. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: gcm - simplify error handling in crypto_rfc4106_create()Eric Biggers1-20/+9
Simplify the error handling in crypto_rfc4106_create() by taking advantage of crypto_grab_aead() now handling an ERR_PTR() name and by taking advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Conveniently, this eliminates the 'ccm_name' variable which was incorrectly named (it should have been 'gcm_name'). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: cts - simplify error handling in crypto_cts_create()Eric Biggers1-19/+8
Simplify the error handling in crypto_cts_create() by taking advantage of crypto_grab_skcipher() now handling an ERR_PTR() name and by taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: ctr - simplify error handling in crypto_rfc3686_create()Eric Biggers1-20/+9
Simplify the error handling in crypto_rfc3686_create() by taking advantage of crypto_grab_skcipher() now handling an ERR_PTR() name and by taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: cryptd - simplify error handling in cryptd_create_*()Eric Biggers1-26/+11
Simplify the error handling in the various cryptd_create_*() functions by taking advantage of crypto_grab_*() now handling an ERR_PTR() name and by taking advantage of crypto_drop_*() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: ccm - simplify error handling in crypto_rfc4309_create()Eric Biggers1-20/+9
Simplify the error handling in crypto_rfc4309_create() by taking advantage of crypto_grab_aead() now handling an ERR_PTR() name and by taking advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that hasn't been grabbed yet. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-06crypto: authencesn - fix weird comma-terminated lineEric Biggers1-1/+1
Fix a weird case where a line was terminated by a comma rather than a semicolon, causing the statement to be continued on the next line. Fortunately the code still behaved as intended, though. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-28crypto: md5 - remove unused macrosYueHaibing1-3/+0
crypto/md5.c:26:0: warning: macro "MD5_DIGEST_WORDS" is not used [-Wunused-macros] crypto/md5.c:27:0: warning: macro "MD5_MESSAGE_BYTES" is not used [-Wunused-macros] They are never used since commit 3c7eb3cc8360 ("md5: remove from lib and only live in crypto"). Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-20Merge branch 'next-integrity' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA fixes from Mimi Zohar: "Two bug fixes and an associated change for each. The one that adds SM3 to the IMA list of supported hash algorithms is a simple change, but could be considered a new feature" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: add sm3 algorithm to hash algorithm configuration list crypto: rename sm3-256 to sm3 in hash_algo_name efi: Only print errors about failing to get certs if EFI vars are found x86/ima: use correct identifier for SetupMode variable
2020-02-18crypto: rename sm3-256 to sm3 in hash_algo_nameTianjia Zhang1-1/+1
The name sm3-256 is defined in hash_algo_name in hash_info, but the algorithm name implemented in sm3_generic.c is sm3, which will cause the sm3-256 algorithm to be not found in some application scenarios of the hash algorithm, and an ENOENT error will occur. For example, IMA, keys, and other subsystems that reference hash_algo_name all use the hash algorithm of sm3. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Pascal van Leeuwen <pvanleeuwen@rambus.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-02-15Merge tag 's390-5.6-3' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu). - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase card/queue requests counter to 64-bit in crypto code. - Fix clang warning in get_tod_clock. - Fix ultravisor info length extensions handling. - Fix style of SPDX License Identifier in vfio-ccw. - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio. * tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: crypto/testmgr: enable selftests for paes-s390 ciphers s390/time: Fix clk type in get_tod_clock s390/uv: Fix handling of length extensions s390/qdio: don't allocate *aob array with GFP_ATOMIC s390/qdio: simplify ACK tracking s390/zcrypt: fix card and queue total counter wrap s390/pkey: fix missing length of protected key on return vfio-ccw: Use the correct style for SPDX License Identifier
2020-02-13Merge branch 'linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto API" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Kconfig - allow tests to be disabled when manager is disabled
2020-02-13crypto/testmgr: enable selftests for paes-s390 ciphersHarald Freudenberger1-0/+36
This patch enables the selftests for the s390 specific protected key AES (PAES) cipher implementations: * cbc-paes-s390 * ctr-paes-s390 * ecb-paes-s390 * xts-paes-s390 PAES is an AES cipher but with encrypted ('protected') key material. However, the paes ciphers are able to derive an protected key from clear key material with the help of the pkey kernel module. So this patch now enables the generic AES tests for the paes ciphers. Under the hood the setkey() functions rearrange the clear key values as clear key token and so the pkey kernel module is able to provide protected key blobs from the given clear key values. The derived protected key blobs are then used within the paes cipers and should produce the very same results as the generic AES implementation with the clear key values. The s390-paes cipher testlist entries are surrounded by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't make any sense on non s390 platforms or without the PAES cipher implementation. Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-13crypto: tcrypt - fix printed skcipher [a]sync modeHoria Geantă1-2/+2
When running tcrypt skcipher speed tests, logs contain things like: testing speed of async ecb(des3_ede) (ecb(des3_ede-generic)) encryption or: testing speed of async ecb(aes) (ecb(aes-ce)) encryption The algorithm implementations are sync, not async. Fix this inaccuracy. Fixes: 7166e589da5b6 ("crypto: tcrypt - Use skcipher") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-13crypto: proc - simplify the c_show functionTianjia Zhang1-1/+1
The path with the CRYPTO_ALG_LARVAL flag has jumped to the end before Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-13crypto: rng - Fix a refcounting bug in crypto_rng_reset()Dan Carpenter1-2/+6
We need to decrement this refcounter on these error paths. Fixes: f7d76e05d058 ("crypto: user - fix use_after_free of struct xxx_request") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-05crypto: Kconfig - allow tests to be disabled when manager is disabledJason A. Donenfeld1-4/+0
The library code uses CRYPTO_MANAGER_DISABLE_TESTS to conditionalize its tests, but the library code can also exist without CRYPTO_MANAGER. That means on minimal configs, the test code winds up being built with no way to disable it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-28Merge branch 'linus' of ↵Linus Torvalds64-1370/+1267
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Removed CRYPTO_TFM_RES flags - Extended spawn grabbing to all algorithm types - Moved hash descsize verification into API code Algorithms: - Fixed recursive pcrypt dead-lock - Added new 32 and 64-bit generic versions of poly1305 - Added cryptogams implementation of x86/poly1305 Drivers: - Added support for i.MX8M Mini in caam - Added support for i.MX8M Nano in caam - Added support for i.MX8M Plus in caam - Added support for A33 variant of SS in sun4i-ss - Added TEE support for Raven Ridge in ccp - Added in-kernel API to submit TEE commands in ccp - Added AMD-TEE driver - Added support for BCM2711 in iproc-rng200 - Added support for AES256-GCM based ciphers for chtls - Added aead support on SEC2 in hisilicon" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits) crypto: arm/chacha - fix build failured when kernel mode NEON is disabled crypto: caam - add support for i.MX8M Plus crypto: x86/poly1305 - emit does base conversion itself crypto: hisilicon - fix spelling mistake "disgest" -> "digest" crypto: chacha20poly1305 - add back missing test vectors and test chunking crypto: x86/poly1305 - fix .gitignore typo tee: fix memory allocation failure checks on drv_data and amdtee crypto: ccree - erase unneeded inline funcs crypto: ccree - make cc_pm_put_suspend() void crypto: ccree - split overloaded usage of irq field crypto: ccree - fix PM race condition crypto: ccree - fix FDE descriptor sequence crypto: ccree - cc_do_send_request() is void func crypto: ccree - fix pm wrongful error reporting crypto: ccree - turn errors to debug msgs crypto: ccree - fix AEAD decrypt auth fail crypto: ccree - fix typo in comment crypto: ccree - fix typos in error msgs crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data crypto: x86/sha - Eliminate casts on asm implementations ...
2020-01-16crypto: essiv - fix AEAD capitalization and preposition use in help textGeert Uytterhoeven1-2/+2
"AEAD" is capitalized everywhere else. Use "an" when followed by a written or spoken vowel. Fixes: be1eb7f78aa8fbe3 ("crypto: essiv - create wrapper template for ESSIV generation") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>