summaryrefslogtreecommitdiffstats
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds34-1855/+3302
Pull crypto updates from Herbert Xu: "API: - Add library interfaces of certain crypto algorithms for WireGuard - Remove the obsolete ablkcipher and blkcipher interfaces - Move add_early_randomness() out of rng_mutex Algorithms: - Add blake2b shash algorithm - Add blake2s shash algorithm - Add curve25519 kpp algorithm - Implement 4 way interleave in arm64/gcm-ce - Implement ciphertext stealing in powerpc/spe-xts - Add Eric Biggers's scalar accelerated ChaCha code for ARM - Add accelerated 32r2 code from Zinc for MIPS - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS Drivers: - Fix entropy reading failures in ks-sa - Add support for sam9x60 in atmel - Add crypto accelerator for amlogic GXL - Add sun8i-ce Crypto Engine - Add sun8i-ss cryptographic offloader - Add a host of algorithms to inside-secure - Add NPCM RNG driver - add HiSilicon HPRE accelerator - Add HiSilicon TRNG driver" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits) crypto: vmx - Avoid weird build failures crypto: lib/chacha20poly1305 - use chacha20_crypt() crypto: x86/chacha - only unregister algorithms if registered crypto: chacha_generic - remove unnecessary setkey() functions crypto: amlogic - enable working on big endian kernel crypto: sun8i-ce - enable working on big endian crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER hwrng: ks-sa - Enable COMPILE_TEST crypto: essiv - remove redundant null pointer check before kfree crypto: atmel-aes - Change data type for "lastc" buffer crypto: atmel-tdes - Set the IV after {en,de}crypt crypto: sun4i-ss - fix big endian issues crypto: sun4i-ss - hide the Invalid keylen message crypto: sun4i-ss - use crypto_ahash_digestsize crypto: sun4i-ss - remove dependency on not 64BIT crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC ...
2019-11-22crypto: chacha_generic - remove unnecessary setkey() functionsEric Biggers1-15/+3
Use chacha20_setkey() and chacha12_setkey() from <crypto/internal/chacha.h> instead of defining them again in chacha_generic.c. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHEREric Biggers1-1/+1
Another instance of CRYPTO_BLKCIPHER made it in just after it was renamed to CRYPTO_SKCIPHER. Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: essiv - remove redundant null pointer check before kfreeChen Wandun1-2/+1
kfree has taken null pointer check into account. so it is safe to remove the unnecessary check. Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - rename tfm context and _setkey callbackDavid Sterba1-18/+18
The TFM context can be renamed to a more appropriate name and the local varaibles as well, using 'tctx' which seems to be more common than 'mctx'. The _setkey callback was the last one without the blake2b_ prefix, rename that too. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _update to api callbackDavid Sterba1-36/+30
Now that there's only one call to blake2b_update, we can merge it to the callback and simplify. The empty input check is split and the rest of code un-indented. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - open code set last block helperDavid Sterba1-6/+2
The helper is trival and called once, inlining makes things simpler. There's a comment to tie it back to the idea behind the code. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - delete unused structs or membersDavid Sterba1-30/+0
All the code for param block has been inlined, last_node and outlen from the state are not used or have become redundant due to other code. Remove it. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - simplify key initDavid Sterba1-8/+6
The keyed init writes the key bytes to the input buffer and does an update. We can do that in two ways: fill the buffer and update immediatelly. This is what current blake2b_init_key does. Any other following _update or _final will continue from the updated state. The other way is to write the key and set the number of bytes to process at the next _update or _final, lazy evaluation. Which leads to the the simplified code in this patch. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge blake2 init to api callbackDavid Sterba1-84/+19
The call chain from blake2b_init can be simplified because the param block is effectively zeros, besides the key. - blake2b_init0 zeroes state and sets IV - blake2b_init sets up param block with defaults (key and some 1s) - init with key, write it to the input buffer and recalculate state So the compact way is to zero out the state and initialize index 0 of the state directly with the non-zero values and the key. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _final implementation to callbackDavid Sterba1-25/+17
blake2b_final is called only once, merge it to the crypto API callback and simplify. This avoids the temporary buffer and swaps the bytes of internal buffer. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: ablkcipher - remove deprecated and unused ablkcipher supportArd Biesheuvel5-571/+1
Now that all users of the deprecated ablkcipher interface have been moved to the skcipher interface, ablkcipher is no longer used and can be removed. Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: tcrypt - constify check alg listCorentin Labbe1-2/+2
this patchs constify the alg list because this list is never modified. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - x86_64 library and KPP implementationsJason A. Donenfeld1-0/+6
This implementation is the fastest available x86_64 implementation, and unlike Sandy2x, it doesn't requie use of the floating point registers at all. Instead it makes use of BMI2 and ADX, available on recent microarchitectures. The implementation was written by Armando Faz-Hernández with contributions (upstream) from Samuel Neves and me, in addition to further changes in the kernel implementation from us. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Co-developed-by: Samuel Neves <sneves@dei.uc.pt> [ardb: - move to arch/x86/crypto - wire into lib/crypto framework - implement crypto API KPP hooks ] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - implement generic KPP driverArd Biesheuvel3-0/+96
Expose the generic Curve25519 library via the crypto API KPP interface. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - add kpp selftestArd Biesheuvel2-0/+1231
In preparation of introducing KPP implementations of Curve25519, import the set of test cases proposed by the Zinc patch set, but converted to the KPP format. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - x86_64 SIMD implementationJason A. Donenfeld1-0/+6
These implementations from Samuel Neves support AVX and AVX-512VL. Originally this used AVX-512F, but Skylake thermal throttling made AVX-512VL more attractive and possible to do with negligable difference. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Co-developed-by: Samuel Neves <sneves@dei.uc.pt> [ardb: move to arch/x86/crypto, wire into lib/crypto framework] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - implement generic shash driverArd Biesheuvel3-0/+190
Wire up our newly added Blake2s implementation via the shash API. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: testmgr - add test cases for Blake2sArd Biesheuvel2-39/+280
As suggested by Eric for the Blake2b implementation contributed by David, introduce a set of test vectors for Blake2s covering different digest and key sizes. blake2s-128 blake2s-160 blake2s-224 blake2s-256 --------------------------------------------------- len=0 | klen=0 klen=1 klen=16 klen=32 len=1 | klen=16 klen=32 klen=0 klen=1 len=7 | klen=32 klen=0 klen=1 klen=16 len=15 | klen=1 klen=16 klen=32 klen=0 len=64 | klen=0 klen=1 klen=16 klen=32 len=247 | klen=16 klen=32 klen=0 klen=1 len=256 | klen=32 klen=0 klen=1 klen=16 Cc: David Sterba <dsterba@suse.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17int128: move __uint128_t compiler test to KconfigArd Biesheuvel1-1/+1
In order to use 128-bit integer arithmetic in C code, the architecture needs to have declared support for it by setting ARCH_SUPPORTS_INT128, and it requires a version of the toolchain that supports this at build time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test whether __SIZEOF_INT128__ is defined, since this is only the case for compilers that can support 128-bit integers. Let's fold this additional test into the Kconfig declaration of ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles, e.g., to decide whether a certain object needs to be included in the first place. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementationArd Biesheuvel1-0/+5
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken straight from this upstream GitHub repository [0] at commit d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes required to build it as part of a Linux kernel module. [0] https://github.com/dot-asm/cryptogams Co-developed-by: Andy Polyakov <appro@cryptogams.org> Signed-off-by: Andy Polyakov <appro@cryptogams.org> Co-developed-by: René van Dorst <opensource@vdorst.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - expose existing driver as poly1305 libraryArd Biesheuvel1-0/+1
Implement the arch init/update/final Poly1305 library routines in the accelerated SIMD driver for x86 so they are accessible to users of the Poly1305 library interface as well. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - depend on generic library not generic shashArd Biesheuvel2-8/+5
Remove the dependency on the generic Poly1305 driver. Instead, depend on the generic library so that we only reuse code without pulling in the generic skcipher implementation as well. While at it, remove the logic that prefers the non-SIMD path for short inputs - this is no longer necessary after recent FPU handling changes on x86. Since this removes the last remaining user of the routines exported by the generic shash driver, unexport them and make them static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - expose init/update/final library interfaceArd Biesheuvel1-21/+1
Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - unify Poly1305 state struct with generic codeArd Biesheuvel1-3/+3
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - move core routines into a separate libraryArd Biesheuvel4-192/+16
Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha - unexport chacha_generic routinesArd Biesheuvel1-18/+8
Now that all users of generic ChaCha code have moved to the core library, there is no longer a need for the generic ChaCha skcpiher driver to export parts of it implementation for reuse by other drivers. So drop the exports, and make the symbols static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: mips/chacha - wire up accelerated 32r2 code from ZincArd Biesheuvel1-0/+6
This integrates the accelerated MIPS 32r2 implementation of ChaCha into both the API and library interfaces of the kernel crypto stack. The significance of this is that, in addition to becoming available as an accelerated library implementation, it can also be used by existing crypto API code such as Adiantum (for block encryption on ultra low performance cores) or IPsec using chacha20poly1305. These are use cases that have already opted into using the abstract crypto API. In order to support Adiantum, the core assembler routine has been adapted to take the round count as a function argument rather than hardcoding it to 20. Co-developed-by: René van Dorst <opensource@vdorst.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/chacha - expose SIMD ChaCha routine as library functionArd Biesheuvel1-0/+1
Wire the existing x86 SIMD ChaCha code into the new ChaCha library interface, so that users of the library interface will get the accelerated version when available. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/chacha - depend on generic chacha library instead of crypto driverArd Biesheuvel1-1/+1
In preparation of extending the x86 ChaCha driver to also expose the ChaCha library interface, drop the dependency on the chacha_generic crypto driver as a non-SIMD fallback, and depend on the generic ChaCha library directly. This way, we only pull in the code we actually need, without registering a set of ChaCha skciphers that we will never use. Since turning the FPU on and off is cheap these days, simplify the SIMD routine by dropping the per-page yield, which makes for a cleaner switch to the library API as well. This also allows use to invoke the skcipher walk routines in non-atomic mode. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha - move existing library code into lib/cryptoArd Biesheuvel2-55/+6
Currently, our generic ChaCha implementation consists of a permute function in lib/chacha.c that operates on the 64-byte ChaCha state directly [and which is always included into the core kernel since it is used by the /dev/random driver], and the crypto API plumbing to expose it as a skcipher. In order to support in-kernel users that need the ChaCha streamcipher but have no need [or tolerance] for going through the abstractions of the crypto API, let's expose the streamcipher bits via a library API as well, in a way that permits the implementation to be superseded by an architecture specific one if provided. So move the streamcipher code into a separate module in lib/crypto, and expose the init() and crypt() routines to users of the library. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: lib - tidy up lib/crypto Kconfig and MakefileArd Biesheuvel1-12/+1
In preparation of introducing a set of crypto library interfaces, tidy up the Makefile and split off the Kconfig symbols into a separate file. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: aead - Split out geniv into its own moduleHerbert Xu3-163/+179
If aead is built as a module along with cryptomgr, it creates a dependency loop due to the dependency chain aead => crypto_null => cryptomgr => aead. This is due to the presence of the AEAD geniv code. This code is not really part of the AEAD API but simply support code for IV generators such as seqiv. This patch moves the geniv code into its own module thus breaking the dependency loop. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: api - Add softdep on cryptomgrHerbert Xu1-0/+1
The crypto API requires cryptomgr to be present for probing to work so we need a softdep to ensure that cryptomgr is added to the initramfs. This was usually not a problem because until very recently it was not practical to build crypto API as module but with the recent work to eliminate direct AES users this is now possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-15crypto: tgr192 - remove unneeded semicolonTian Tao1-2/+2
Fix the warning below. ./crypto/tgr192.c:558:43-44: Unneeded semicolon ./crypto/tgr192.c:586:44-45: Unneeded semicolon Fixes: f63fbd3d501b ("crypto: tgr192 - Switch to shash") Signed-off-by: Tian Tao <tiantao6@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-12KEYS: trusted: Create trusted keys subsystemSumit Garg1-1/+1
Move existing code to trusted keys subsystem. Also, rename files with "tpm" as suffix which provides the underlying implementation. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12KEYS: Use common tpm_buf for trusted and asymmetric keysSumit Garg1-62/+45
Switch to utilize common heap based tpm_buf code for TPM based trusted and asymmetric keys rather than using stack based tpm1_buf code. Also, remove tpm1_buf code. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12tpm: Move tpm_buf code to include/linux/Sumit Garg1-6/+6
Move tpm_buf code to common include/linux/tpm.h header so that it can be reused via other subsystems like trusted keys etc. Also rename trusted keys and asymmetric keys usage of TPM 1.x buffer implementation to tpm1_buf to avoid any compilation errors. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers2-45/+45
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - remove the "blkcipher" algorithm typeEric Biggers7-664/+6
Now that all "blkcipher" algorithms have been converted to "skcipher", remove the blkcipher algorithm type. The skcipher (symmetric key cipher) algorithm type was introduced a few years ago to replace both blkcipher and ablkcipher (synchronous and asynchronous block cipher). The advantages of skcipher include: - A much less confusing name, since none of these algorithm types have ever actually been for raw block ciphers, but rather for all length-preserving encryption modes including block cipher modes of operation, stream ciphers, and other length-preserving modes. - It unified blkcipher and ablkcipher into a single algorithm type which supports both synchronous and asynchronous implementations. Note, blkcipher already operated only on scatterlists, so the fact that skcipher does too isn't a regression in functionality. - Better type safety by using struct skcipher_alg, struct crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc. - It sometimes simplifies the implementations of algorithms. Also, the blkcipher API was no longer being tested. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - rename crypto_skcipher_type2 to crypto_skcipher_typeEric Biggers1-7/+6
Now that the crypto_skcipher_type() function has been removed, there's no reason to call the crypto_type struct for skciphers "crypto_skcipher_type2". Rename it to simply "crypto_skcipher_type". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - unify the crypto_has_skcipher*() functionsEric Biggers1-2/+2
crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they check for the availability of an algorithm of type skcipher, blkcipher, or ablkcipher, which also meets any non-type constraints the caller specified. And they have exactly the same prototype. Therefore, eliminate the redundancy by removing crypto_has_skcipher() and renaming crypto_has_skcipher2() to crypto_has_skcipher(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: testmgr - add test vectors for blake2bDavid Sterba2-0/+335
Test vectors for blake2b with various digest sizes. As the algorithm is the same up to the digest calculation, the key and input data length is distributed in a way that tests all combinanions of the two over the digest sizes. Based on the suggestion from Eric, the following input sizes are tested [0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the padded and the non-padded input buffers are tested. blake2b-160 blake2b-256 blake2b-384 blake2b-512 --------------------------------------------------- len=0 | klen=0 klen=1 klen=32 klen=64 len=1 | klen=32 klen=64 klen=0 klen=1 len=7 | klen=64 klen=0 klen=1 klen=32 len=15 | klen=1 klen=32 klen=64 klen=0 len=64 | klen=0 klen=1 klen=32 klen=64 len=247 | klen=32 klen=64 klen=0 klen=1 len=256 | klen=64 klen=0 klen=1 klen=32 Where key: - klen=0: empty key - klen=1: 1 byte value 0x42, 'B' - klen=32: first 32 bytes of the default key, sequence 00..1f - klen=64: default key, sequence 00..3f The unkeyed vectors are ordered before keyed, as this is required by testmgr. CC: Eric Biggers <ebiggers@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: blake2b - add blake2b generic implementationDavid Sterba3-0/+453
The patch brings support of several BLAKE2 variants (2b with various digest lengths). The keyed digest is supported, using tfm->setkey call. The in-tree user will be btrfs (for checksumming), we're going to use the BLAKE2b-256 variant. The code is reference implementation taken from the official sources and modified in terms of kernel coding style (whitespace, comments, uintXX_t -> uXX types, removed unused prototypes and #ifdefs, removed testing code, changed secure_zero_memory -> memzero_explicit, used own helpers for unaligned reads/writes and rotations). Further changes removed sanity checks of key length or output size, these values are verified in the crypto API callbacks or hardcoded in shash_alg and not exposed to users. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: ecdh - fix big endian bug in ECC libraryArd Biesheuvel1-1/+2
The elliptic curve arithmetic library used by the EC-DH KPP implementation assumes big endian byte order, and unconditionally reverses the byte and word order of multi-limb quantities. On big endian systems, the byte reordering is not necessary, while the word ordering needs to be retained. So replace the __swab64() invocation with a call to be64_to_cpu() which should do the right thing for both little and big endian builds. Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-26crypto: powerpc - convert SPE AES algorithms to skcipher APIEric Biggers1-0/+1
Convert the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Tested with: export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig cat >> .config << EOF # CONFIG_MODULES is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y EOF make olddefconfig make -j32 qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \ -kernel arch/powerpc/boot/zImage \ -append cryptomgr.fuzz_iterations=1000 Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this patch. This patch also cleans up the code by making ->encrypt() and ->decrypt() call a common function for each of ECB, CBC, and XTS, and by using a clearer way to compute the length to process at each step. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-26crypto: aegis128 - duplicate init() and final() hooks in SIMD codeArd Biesheuvel3-12/+97
In order to speed up aegis128 processing even more, duplicate the init() and final() routines as SIMD versions in their entirety. This results in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES instructions). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-26crypto: aegis128 - avoid function pointers for parameterizationArd Biesheuvel1-59/+46
Instead of passing around an ops structure with function pointers, which forces indirect calls to be used, refactor the code slightly so we can use ordinary function calls. At the same time, switch to a static key to decide whether or not the SIMD code path may be used. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-23crypto: sparc/des - convert to skcipher APIEric Biggers1-0/+1
Convert the glue code for the SPARC64 DES opcodes implementations of DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-23crypto: sparc/camellia - convert to skcipher APIEric Biggers1-0/+1
Convert the glue code for the SPARC64 Camellia opcodes implementations of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 13:11:46 +0000