summaryrefslogtreecommitdiffstats
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2015-09-02Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-blockLinus Torvalds2-3/+3
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-08-25crypto: algif_aead - fix for multiple operations on AF_ALG socketsLars Persson1-0/+1
The tsgl scatterlist must be re-initialized after each operation. Otherwise the sticky bits in the page_link will corrupt the list with pre-mature termination or false chaining. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21crypto: testmgr - Use new skcipher interfaceHerbert Xu1-29/+32
This patch replaces uses of blkcipher and ablkcipher with the new skcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21crypto: skcipher - Add top-level skcipher interfaceHerbert Xu2-0/+246
This patch introduces the crypto skcipher interface which aims to replace both blkcipher and ablkcipher. It's very similar to the existing ablkcipher interface. The main difference is the removal of the givcrypt interface. In order to make the transition easier for blkcipher users, there is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place a request on the stack for synchronous transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-19crypto: cmac - allow usage in FIPS modeStephan Mueller1-0/+2
CMAC is an approved cipher in FIPS 140-2. The patch allows the use of CMAC with TDES and AES in FIPS mode. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: replace scatterwalk_sg_chain with sg_chainDan Williams3-7/+7
Signed-off-by: Dan Williams <dan.j.williams@intel.com> [hch: split from a larger patch by Dan] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17crypto: null - Add missing Kconfig tristate for NULL2Herbert Xu1-0/+1
This patch adds a missing tristate statement to Kconfig for the new CRYPTO_NULL2 option. Fixes: 149a39717dcc ("crypto: aead - Add type-safe geniv init/exit helpers") Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: null - Use NULL2 in MakefileHerbert Xu1-1/+1
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now depends indirectly on NULL2. However, the Makefile was not updated to use the new option, resulting in potential build failures when only NULL2 is enabled. Fixes: 149a39717dcc ("crypto: aead - Add type-safe geniv init/exit helpers") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Remove CRYPTO_ALG_AEAD_NEW flagHerbert Xu10-45/+16
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Remove old AEAD interfacesHerbert Xu1-597/+9
Now that the AEAD conversion is complete we can rip out the old AEAD interafce and associated code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: cryptd - Remove reference to crypto_aead_crtHerbert Xu1-2/+2
Pretty soon the crypto_aead encrypt/decrypt hooks will disappear as they are now always identical to those in struct aead_alg. This patch replaces the references to these hooks with the ones from aead_alg instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: echainiv - Use generic geniv init/exit helpersHerbert Xu1-63/+7
This patch replaces the echainiv init/exit handlers with the generic geniv helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Use generic geniv init/exit helpersHerbert Xu1-68/+7
This patch replaces the seqiv init/exit handlers with the generic geniv helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Add type-safe geniv init/exit helpersHerbert Xu2-3/+63
This patch adds the helpers aead_init_geniv and aead_exit_geniv which are type-safe and intended the replace the existing geniv init/exit helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: echainiv - Remove AEAD compatibility codeHerbert Xu1-4/+0
Now that we no longer have any legacy AEAD implementations the compatibility code path can no longer be triggered. This patch removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Remove AEAD compatibility codeHerbert Xu1-127/+0
Now that we no longer have any legacy AEAD implementations the compatibility code path can no longer be triggered. This patch removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Remove seqnivHerbert Xu1-244/+1
Now that IPsec no longer uses seqniv we can remove it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: user - Remove crypto_lookup_aead callHerbert Xu1-32/+0
As IV generators are now standalone AEAD transforms, we no longer need to use the crypto_lookup_aead call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: algboss - Remove reference to nivaeadHerbert Xu1-7/+5
This patch removes a legacy reference to nivaead which is no longer used. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: authencesn - Convert to new AEAD interfaceHerbert Xu1-498/+222
This patch converts authencesn to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu1-32/+12
Merge the crypto tree to pull in the authencesn fix.
2015-08-10crypto: authencesn - Fix breakage with new ESP codeHerbert Xu1-32/+12
The ESP code has been updated to generate a completely linear AD SG list. This unfortunately broke authencesn which expects the AD to be divided into at least three parts. This patch fixes it to cope with the new format. Later we will fix it properly to accept arbitrary input and not rely on the input being linear as part of the AEAD conversion. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-05crypto: authenc - Add Kconfig dependency on CRYPTO_NULLHerbert Xu1-0/+1
CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses null for copying. Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: testmgr - Reenable authenc testsHerbert Xu1-13/+13
Now that all implementations of authenc have been converted we can reenable the tests. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: authenc - Convert to new AEAD interfaceHerbert Xu1-401/+183
This patch converts authenc to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: testmgr - Disable authenc test and convert test vectorsHerbert Xu2-39/+109
This patch disables the authenc tests while the conversion to the new IV calling convention takes place. It also replaces the authenc test vectors with ones that will work with the new IV convention. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: jitterentropy - use safe format string parametersKees Cook1-1/+1
Since the API for jent_panic() does not include format string parameters, adjust the call to panic() to use a literal string to avoid any future callers from leaking format strings into the panic message. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-21crypto: rsa - fix invalid check for keylen in fips modeTadeusz Struk1-2/+2
The condition checking allowed key length was invalid. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Add a four block AVX2 variant for x86_64Martin Willi1-1/+1
Extends the x86_64 Poly1305 authenticator by a function processing four consecutive Poly1305 blocks in parallel using AVX2 instructions. For large messages, throughput increases by ~15-45% compared to two block SSE2: testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3809514 opers/sec, 365713411 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5973423 opers/sec, 573448627 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9446779 opers/sec, 906890803 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1364814 opers/sec, 393066691 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2045780 opers/sec, 589184697 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711946 opers/sec, 1069040592 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 573686 opers/sec, 605812732 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1647802 opers/sec, 1740079440 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 292970 opers/sec, 609378224 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 943229 opers/sec, 1961916528 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 494623 opers/sec, 2041804569 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 254045 opers/sec, 2089271014 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3826224 opers/sec, 367317552 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5948638 opers/sec, 571069267 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9439110 opers/sec, 906154627 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1367756 opers/sec, 393913872 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2056881 opers/sec, 592381958 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711153 opers/sec, 1068812179 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 574940 opers/sec, 607136745 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1948830 opers/sec, 2057964585 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 293308 opers/sec, 610082096 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 1235224 opers/sec, 2569267792 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 684405 opers/sec, 2825226316 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 367101 opers/sec, 3019039446 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Add a SSE2 SIMD variant for x86_64Martin Willi1-0/+12
Implements an x86_64 assembler driver for the Poly1305 authenticator. This single block variant holds the 130-bit integer in 5 32-bit words, but uses SSE to do two multiplications/additions in parallel. When calling updates with small blocks, the overhead for kernel_fpu_begin/ kernel_fpu_end() negates the perfmance gain. We therefore use the poly1305-generic fallback for small updates. For large messages, throughput increases by ~5-10% compared to poly1305-generic: testing speed of poly1305 (poly1305-generic) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Export common Poly1305 helpersMartin Willi2-41/+36
As architecture specific drivers need a software fallback, export Poly1305 init/update/final functions together with some helpers in a header file. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: testmgr - Add a longer ChaCha20 test vectorMartin Willi1-1/+333
The AVX2 variant of ChaCha20 is used only for messages with >= 512 bytes length. With the existing test vectors, the implementation could not be tested. Due that lack of such a long official test vector, this one is self-generated using chacha20-generic. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20 - Add an eight block AVX2 variant for x86_64Martin Willi1-1/+1
Extends the x86_64 ChaCha20 implementation by a function processing eight ChaCha20 blocks in parallel using AVX2. For large messages, throughput increases by ~55-70% compared to four block SSSE3: testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes) test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes) test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes) test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes) test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 41999675 operations in 10 seconds (671994800 bytes) test 1 (256 bit key, 64 byte blocks): 45805908 operations in 10 seconds (2931578112 bytes) test 2 (256 bit key, 256 byte blocks): 32814947 operations in 10 seconds (8400626432 bytes) test 3 (256 bit key, 1024 byte blocks): 19777167 operations in 10 seconds (20251819008 bytes) test 4 (256 bit key, 8192 byte blocks): 2279321 operations in 10 seconds (18672197632 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64Martin Willi1-0/+15
Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This single block variant works on a single state matrix using SSE instructions. It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate operations. For large messages, throughput increases by ~65% compared to chacha20-generic: testing speed of chacha20 (chacha20-generic) encryption test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes) test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes) test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes) test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes) test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes) test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes) test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes) test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes) test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20 - Export common ChaCha20 helpersMartin Willi2-18/+13
As architecture specific drivers need a software fallback, export a ChaCha20 en-/decryption function together with some helpers in a header file. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: tcrypt - Add ChaCha20/Poly1305 speed testsMartin Willi2-0/+35
Adds individual ChaCha20 and Poly1305 and a combined rfc7539esp AEAD speed test using mode numbers 214, 321 and 213. For Poly1305 we add a specific speed template, as it expects the key prepended to the input data. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20poly1305 - Convert to new AEAD interfaceHerbert Xu2-90/+133
This patch converts rfc7539 and rfc7539esp to the new AEAD interface. The test vectors for rfc7539esp have also been updated to include the IV. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Martin Willi <martin@strongswan.org>
2015-07-17crypto: rsa - limit supported key lengthsTadeusz Struk1-1/+25
Introduce constrains for RSA keys lengths. Only key lengths of 512, 1024, 1536, 2048, 3072, and 4096 bits will be supported. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: testmgr - Reenable rfc4309 testHerbert Xu1-1/+1
Now that all implementations of rfc4309 have been converted we can reenable the test. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: ccm - Convert to new AEAD interfaceHerbert Xu1-164/+224
This patch converts generic ccm and its associated transforms to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: testmgr - Disable rfc4309 test and convert test vectorsHerbert Xu2-219/+1413
This patch disables the rfc4309 test while the conversion to the new seqiv calling convention takes place. It also replaces the rfc4309 test vectors with ones that will work with the new IV convention. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: testmgr - Reenable rfc4106 testHerbert Xu1-1/+1
Now that all implementations of rfc4106 have been converted we can reenable the test. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: gcm - Use new IV conventionHerbert Xu1-37/+77
This patch converts rfc4106 to the new calling convention where the IV is now part of the AD and needs to be skipped. This patch also makes use of the new type-safe way of freeing instances. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: tcrypt - Add support for new IV conventionHerbert Xu1-3/+8
This patch allows the AEAD speed tests to cope with the new seqiv calling convention as well as the old one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: testmgr - Disable rfc4106 test and convert test vectorsHerbert Xu2-285/+319
This patch disables the rfc4106 test while the conversion to the new seqiv calling convention takes place. It also converts the rfc4106 test vectors to the new format. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: aead - Propagate new AEAD implementation flag for IV generatorsHerbert Xu1-2/+3
This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: seqiv - Replace seqniv with seqivHerbert Xu1-15/+19
This patch replaces the seqniv generator with seqiv when the underlying algorithm understands the new calling convention. This not only makes more sense as now seqiv is solely responsible for IV generation rather than also determining how the IV is going to be used, it also allows for optimisations in the underlying implementation. For example, the space for the IV could be used to add padding for authentication. This patch also removes the unnecessary copying of IV to dst during seqiv decryption as the IV is part of the AD and not cipher text. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: echainiv - Fix encryption conventionHerbert Xu1-13/+11
This patch fixes a bug where we were incorrectly including the IV in the AD during encryption. The IV must remain in the plain text for it to be encrypted. During decryption there is no need to copy the IV to dst because it's now part of the AD. This patch removes an unncessary check on authsize which would be performed by the underlying decrypt call. Finally this patch makes use of the type-safe init/exit functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: cryptd - Propagate new AEAD implementation flagHerbert Xu1-5/+6
This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-14crypto: pcrypt - Propagate new AEAD implementation flagHerbert Xu1-1/+11
This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated. It also restores the ASYNC bit that went missing during the AEAD conversion. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 03:55:17 +0000