summaryrefslogtreecommitdiffstats
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2008-02-06async_tx: allow architecture specific async_tx_find_channel implementationsDan Williams4-7/+13
The source and destination addresses are included to allow channel selection based on address alignment. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06async_tx: replace 'int_en' with operation preparation flagsDan Williams3-6/+10
Pass a full set of flags to drivers' per-operation 'prep' routines. Currently the only flag passed is DMA_PREP_INTERRUPT. The expectation is that arch-specific async_tx_find_channel() implementations can exploit this capability to find the best channel for an operation. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06async_tx: kill tx_set_src and tx_set_dest methodsDan Williams3-58/+83
The tx_set_src and tx_set_dest methods were originally implemented to allow an array of addresses to be passed down from async_xor to the dmaengine driver while minimizing stack overhead. Removing these methods allows drivers to have all transaction parameters available at 'prep' time, saves two function pointers in struct dma_async_tx_descriptor, and reduces the number of indirect branches.. A consequence of moving this data to the 'prep' routine is that multi-source routines like async_xor need temporary storage to convert an array of linear addresses into an array of dma addresses. In order to keep the same stack footprint of the previous implementation the input array is reused as storage for the dma addresses. This requires that sizeof(dma_addr_t) be less than or equal to sizeof(void *). As a consequence CONFIG_DMADEVICES now depends on !CONFIG_HIGHMEM64G. It also requires that drivers be able to make descriptor resources available when the 'prep' routine is polled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com>
2008-02-06async_tx: kill ASYNC_TX_ASSUME_COHERENTDan Williams3-31/+14
Remove the unused ASYNC_TX_ASSUME_COHERENT flag. Async_tx is meant to hide the difference between asynchronous hardware and synchronous software operations, this flag requires clients to understand cache coherency consequences of the async path. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06async_tx: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng1-2/+1
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-02-06async_tx: fix compile breakage, mark do_async_xor __always_inlineDan Williams1-1/+5
do_async_xor must be compiled away on !HAS_DMA archs. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds34-2061/+9478
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
2008-01-11[CRYPTO] cast6: inline bloat--Ilpo Järvinen1-3/+3
Bloat-o-meter shows rather high readings for cast6... crypto/cast6.c: cast6_setkey | -1310 cast6_encrypt | -4567 cast6_decrypt | -4561 3 functions changed, 10438 bytes removed, diff: -10438 crypto/cast6.c: W | +659 Q | +308 QBAR | +316 3 functions changed, 1283 bytes added, diff: +1283 crypto/cast6.o: 6 functions changed, 1283 bytes added, 10438 bytes removed, diff: -9155 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Make xcbc available as a standalone testHerbert Xu1-0/+6
Currently the gcm(aes) tests have to be taken together with all other algorithms. This patch makes it available by itself at number 106. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] xcbc: Remove bogus hash/cipher testHerbert Xu1-4/+1
When setting the digest size xcbc tests to see if the underlying algorithm is a hash. This is silly because we don't allow it to be a hash and we've specifically requested for a cipher. This patch removes the bogus test. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] xcbc: Fix algorithm leak when block size check failsHerbert Xu1-1/+2
When the underlying algorithm has a block size other than 16 we abort without freeing it. In fact, we try to return the algorithm itself as an error! This patch plugs the leak and makes it return -EINVAL instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Zero axbuf in the right functionHerbert Xu1-1/+1
The axbuf buffer is used by test_aead and therefore should be zeroed there instead of in test_hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20Tan Swee Heng1-2/+0
Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Add select of AEADSebastian Siewior1-0/+1
ERROR: "crypto_aead_setauthsize" [crypto/tcrypt.ko] undefined! ERROR: "crypto_alloc_aead" [crypto/tcrypt.ko] undefined! Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] salsa20: Add x86-64 assembly versionTan Swee Heng1-0/+15
This is the x86-64 version of the Salsa20 stream cipher algorithm. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/amd64-3/salsa20.s>. It has been reformatted for clarity. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version)Tan Swee Heng1-0/+15
This patch contains the salsa20-i586 implementation. The original assembly code came from <http://cr.yp.to/snuffle/salsa20/x86-pm/salsa20.s>. I have reformatted it (added indents) so that it matches the other algorithms in arch/x86/crypto. Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] gcm: Introduce rfc4106Herbert Xu1-0/+239
This patch introduces the rfc4106 wrapper for GCM just as we have an rfc4309 wrapper for CCM. The purpose of the wrapper is to include part of the IV in the key so that it can be negotiated by IPsec. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] api: Show async typeHerbert Xu2-0/+8
This patch adds an async field to /proc/crypto for ablkcipher and aead algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] chainiv: Avoid lock spinning where possibleHerbert Xu1-8/+200
This patch makes chainiv avoid spinning by postponing requests on lock contention if the user allows the use of asynchronous algorithms. If a synchronous algorithm is requested then we behave as before. This should improve IPsec performance on SMP when two CPUs attempt to transmit over the same SA. Currently one of them will spin doing nothing waiting for the other CPU to finish its encryption. This patch makes it postpone the request and get on with other work. If only one CPU is transmitting for a given SA, then we will process the request synchronously as before. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] seqiv: Add select AEAD in KconfigHerbert Xu1-0/+1
Now that seqiv supports AEAD algorithms it needs to select the AEAD option. Thanks to Erez Zadok for pointing out the problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copyHerbert Xu1-0/+3
It's better to return silently than crash and burn when someone feeds us a zero length. In particular the null digest algorithm when used as part of authenc will do that to us. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] null: Allow setkey on digest_null Herbert Xu1-0/+1
We need to allow setkey on digest_null if it is to be used directly by authenc instead of through hmac. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] null: Add null blkcipher algorithmHerbert Xu1-10/+59
This patch adds a null blkcipher algorithm called ecb(cipher_null) for backwards compatibility. Previously the null algorithm when used by IPsec copied the data byte by byte. This new algorithm optimises that to a straight memcpy which lets us better measure inherent overheads in our IPsec code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Add CCM vectorsJoy Latten2-2/+289
This patch adds 7 test vectors to tcrypt for CCM. The test vectors are from rfc 3610. There are about 10 more test vectors in RFC 3610 and 4 or 5 more in NIST. I can add these as time permits. I also needed to set authsize. CCM has a prerequisite of authsize. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] ccm: Added CCM modeJoy Latten3-0/+897
This patch adds Counter with CBC-MAC (CCM) support. RFC 3610 and NIST Special Publication 800-38C were referenced. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aead: Create default givcipher instancesHerbert Xu1-0/+153
This patch makes crypto_alloc_aead always return algorithms that is capable of generating their own IVs through givencrypt and givdecrypt. All existing AEAD algorithms already do. New ones must either supply their own or specify a generic IV generator with the geniv field. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] seqiv: Add AEAD supportHerbert Xu1-16/+175
This patch adds support for using seqiv with AEAD algorithms. This is useful for those AEAD algorithms that performs authentication before encryption because the IV generated by the underlying encryption algorithm won't be available for authentication. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aead: Add aead_geniv_alloc/aead_geniv_freeHerbert Xu1-5/+211
This patch creates the infrastructure to help the construction of IV generator templates that wrap around AEAD algorithms by adding an IV generator to them. This is useful for AEAD algorithms with no built-in IV generator or to replace their built-in generator. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aead: Allow algorithms with no givcrypt supportHerbert Xu1-3/+3
Some algorithms always require manual IV construction. For instance, the generic CCM algorithm requires the first byte of the IV to be manually constructed. Such algorithms are always used by other algorithms equipped with their own IV generators and do not need IV generation per se. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] authenc: Add givencrypt operationHerbert Xu1-22/+114
This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aead: Add givcrypt operationsHerbert Xu1-0/+7
This patch adds the underlying givcrypt operations for aead and associated support elements. The rationale is identical to that of the skcipher givcrypt operations, i.e., sometimes only the algorithm knows how the IV should be generated. A new request type aead_givcrypt_request is added which contains an embedded aead_request structure with two new elements to support this operation. The new elements are seq and giv. The seq field should contain a strictly increasing 64-bit integer which may be used by certain IV generators as an input value. The giv field will be used to store the generated IV. It does not need to obey the alignment requirements of the algorithm because it's not used during the operation. The existing iv field must still be available as it will be used to store intermediate IVs and the output IV if chaining is desired. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] seqiv: Add Sequence Number IV GeneratorHerbert Xu4-0/+198
This generator generates an IV based on a sequence number by xoring it with a salt. This algorithm is mainly useful for CTR and similar modes. This patch also sets it as the default IV generator for ctr. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] gcm: Use crypto_grab_skcipherHerbert Xu1-26/+23
This patch converts the gcm algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] gcm: Allow block cipher parameterHerbert Xu1-24/+89
This patch adds the gcm_base template which takes a block cipher parameter instead of cipher. This allows the user to specify a specific CTR implementation. This also fixes a leak of the cipher algorithm that was previously looked up but never freed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] authenc: Use crypto_grab_skcipherHerbert Xu1-27/+38
This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] skcipher: Create default givcipher instancesHerbert Xu4-6/+177
This patch makes crypto_alloc_ablkcipher/crypto_grab_skcipher always return algorithms that are capable of generating their own IVs through givencrypt and givdecrypt. Each algorithm may specify its default IV generator through the geniv field. For algorithms that do not set the geniv field, the blkcipher layer will pick a default. Currently it's chainiv for synchronous algorithms and eseqiv for asynchronous algorithms. Note that if these wrappers do not work on an algorithm then that algorithm must specify its own geniv or it can't be used at all. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] eseqiv: Add Encrypted Sequence Number IV GeneratorHerbert Xu2-0/+265
This generator generates an IV based on a sequence number by xoring it with a salt and then encrypting it with the same key as used to encrypt the plain text. This algorithm requires that the block size be equal to the IV size. It is mainly useful for CBC. It has one noteworthy property that for IPsec the IV happens to lie just before the plain text so the IV generation simply increases the number of encrypted blocks by one. Therefore the cost of this generator is entirely dependent on the speed of the underlying cipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] chainiv: Add chain IV generatorHerbert Xu2-0/+140
The chain IV generator is the one we've been using in the IPsec stack. It simply starts out with a random IV, then uses the last block of each encrypted packet's cipher text as the IV for the next packet. It can only be used by synchronous ciphers since we have to make sure that we don't start the encryption of the next packet until the last one has completed. It does have the advantage of using very little CPU time since it doesn't have to generate anything at all. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] skcipher: Add skcipher_geniv_alloc/skcipher_geniv_freeHerbert Xu2-2/+193
This patch creates the infrastructure to help the construction of givcipher templates that wrap around existing blkcipher/ablkcipher algorithms by adding an IV generator to them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] cryptd: Use geniv of the underlying algorithmHerbert Xu1-0/+2
If the underlying algorithm specifies a specific geniv algorithm then we should use it for the cryptd version as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] skcipher: Added geniv fieldHerbert Xu2-0/+4
This patch introduces the geniv field which indicates the default IV generator for each algorithm. It should point to a string that is not freed as long as the algorithm is registered. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] skcipher: Add givcrypt operations and givcipher typeHerbert Xu1-0/+46
Different block cipher modes have different requirements for intialisation vectors. For example, CBC can use a simple randomly generated IV while modes such as CTR must use an IV generation mechanisms that give a stronger guarantee on the lack of collisions. Furthermore, disk encryption modes have their own IV generation algorithms. Up until now IV generation has been left to the users of the symmetric key cipher API. This is inconvenient as the number of block cipher modes increase because the user needs to be aware of which mode is supposed to be paired with which IV generation algorithm. Therefore it makes sense to integrate the IV generation into the crypto API. This patch takes the first step in that direction by creating two new ablkcipher operations, givencrypt and givdecrypt that generates an IV before performing the actual encryption or decryption. The operations are currently not exposed to the user. That will be done once the underlying functionality has actually been implemented. It also creates the underlying givcipher type. Algorithms that directly generate IVs would use it instead of ablkcipher. All other algorithms (including all existing ones) would generate a givcipher algorithm upon registration. This givcipher algorithm will be constructed from the geniv string that's stored in every algorithm. That string will locate a template which is instantiated by the blkcipher/ablkcipher algorithm in question to give a givcipher algorithm. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] skcipher: Add crypto_grab_skcipher interfaceHerbert Xu1-2/+23
Note: From now on the collective of ablkcipher/blkcipher/givcipher will be known as skcipher, i.e., symmetric key cipher. The name blkcipher has always been much of a misnomer since it supports stream ciphers too. This patch adds the function crypto_grab_skcipher as a new way of getting an ablkcipher spawn. The problem is that previously we did this in two steps, first getting the algorithm and then calling crypto_init_spawn. This meant that each spawn user had to be aware of what type and mask to use for these two steps. This is difficult and also presents a problem when the type/mask changes as they're about to be for IV generators. The new interface does both steps together just like crypto_alloc_ablkcipher. As a side-effect this also allows us to be stronger on type enforcement for spawns. For now this is only done for ablkcipher but it's trivial to extend for other types. This patch also moves the type/mask logic for skcipher into the helpers crypto_skcipher_type and crypto_skcipher_mask. Finally this patch introduces the function crypto_require_sync to determine whether the user is specifically requesting a sync algorithm. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] gcm: Add support for async ciphersHerbert Xu1-78/+112
This patch adds the necessary changes for GCM to be used with async ciphers. This would allow it to be used with hardware devices that support CTR. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] ctr: Refactor into ctr and rfc3686Herbert Xu3-136/+213
As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] blkcipher: Merge ablkcipher and blkcipher into one option/moduleHerbert Xu2-7/+5
With the impending addition of the givcipher type, both blkcipher and ablkcipher algorithms will use it to create givcipher objects. As such it no longer makes sense to split the system between ablkcipher and blkcipher. In particular, both ablkcipher.c and blkcipher.c would need to use the givcipher type which has to reside in ablkcipher.c since it shares much code with it. This patch merges the two Kconfig options as well as the modules into one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] gcm: Fix request context alignmentHerbert Xu1-7/+14
This patch fixes the request context alignment so that it is actually aligned to the value required by the algorithm. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] api: Add crypto_attr_alg_nameHerbert Xu1-2/+16
This patch adds a new helper crypto_attr_alg_name which is basically the first half of crypto_attr_alg. That is, it returns an algorithm name parameter as a string without looking it up. The caller can then look it up immediately or defer it until later. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] authenc: Select HASH in KconfigBorislav Petkov1-0/+1
i get here: ---- LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map Building modules, stage 2. MODPOST 226 modules ERROR: "crypto_hash_type" [crypto/authenc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 --- which fails because crypto_hash_type is declared in crypto/hash.c. You might wanna fix it like so: Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] authenc: Merge common hashing codeHerbert Xu1-38/+28
This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>