summaryrefslogtreecommitdiffstats
path: root/crypto/ecc.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-18crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithmVitaly Chikunov1-8/+384
Add Elliptic Curve Russian Digital Signature Algorithm (GOST R 34.10-2012, RFC 7091, ISO/IEC 14888-3) is one of the Russian (and since 2018 the CIS countries) cryptographic standard algorithms (called GOST algorithms). Only signature verification is supported, with intent to be used in the IMA. Summary of the changes: * crypto/Kconfig: - EC-RDSA is added into Public-key cryptography section. * crypto/Makefile: - ecrdsa objects are added. * crypto/asymmetric_keys/x509_cert_parser.c: - Recognize EC-RDSA and Streebog OIDs. * include/linux/oid_registry.h: - EC-RDSA OIDs are added to the enum. Also, a two currently not implemented curve OIDs are added for possible extension later (to not change numbering and grouping). * crypto/ecc.c: - Kenneth MacKay copyright date is updated to 2014, because vli_mmod_slow, ecc_point_add, ecc_point_mult_shamir are based on his code from micro-ecc. - Functions needed for ecrdsa are EXPORT_SYMBOL'ed. - New functions: vli_is_negative - helper to determine sign of vli; vli_from_be64 - unpack big-endian array into vli (used for a signature); vli_from_le64 - unpack little-endian array into vli (used for a public key); vli_uadd, vli_usub - add/sub u64 value to/from vli (used for increment/decrement); mul_64_64 - optimized to use __int128 where appropriate, this speeds up point multiplication (and as a consequence signature verification) by the factor of 1.5-2; vli_umult - multiply vli by a small value (speeds up point multiplication by another factor of 1.5-2, depending on vli sizes); vli_mmod_special - module reduction for some form of Pseudo-Mersenne primes (used for the curves A); vli_mmod_special2 - module reduction for another form of Pseudo-Mersenne primes (used for the curves B); vli_mmod_barrett - module reduction using pre-computed value (used for the curve C); vli_mmod_slow - more general module reduction which is much slower (used when the modulus is subgroup order); vli_mod_mult_slow - modular multiplication; ecc_point_add - add two points; ecc_point_mult_shamir - add two points multiplied by scalars in one combined multiplication (this gives speed up by another factor 2 in compare to two separate multiplications). ecc_is_pubkey_valid_partial - additional samity check is added. - Updated vli_mmod_fast with non-strict heuristic to call optimal module reduction function depending on the prime value; - All computations for the previously defined (two NIST) curves should not unaffected. * crypto/ecc.h: - Newly exported functions are documented. * crypto/ecrdsa_defs.h - Five curves are defined. * crypto/ecrdsa.c: - Signature verification is implemented. * crypto/ecrdsa_params.asn1, crypto/ecrdsa_pub_key.asn1: - Templates for BER decoder for EC-RDSA parameters and public key. Cc: linux-integrity@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: ecc - make ecc into separate moduleVitaly Chikunov1-7/+18
ecc.c have algorithms that could be used togeter by ecdh and ecrdsa. Make it separate module. Add CRYPTO_ECC into Kconfig. EXPORT_SYMBOL and document to what seems appropriate. Move structs ecc_point and ecc_curve from ecc_curve_defs.h into ecc.h. No code changes. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: ecc - regularize scalar for scalar multiplicationVitaly Chikunov1-4/+12
ecc_point_mult is supposed to be used with a regularized scalar, otherwise, it's possible to deduce the position of the top bit of the scalar with timing attack. This is important when the scalar is a private key. ecc_point_mult is already using a regular algorithm (i.e. having an operation flow independent of the input scalar) but regularization step is not implemented. Arrange scalar to always have fixed top bit by adding a multiple of the curve order (n). References: The constant time regularization step is based on micro-ecc by Kenneth MacKay and also referenced in the literature (Bernstein, D. J., & Lange, T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.) Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Cc: kernel-hardening@lists.openwall.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: ecc - check for invalid values in the key verification testVitaly Chikunov1-16/+26
Currently used scalar multiplication algorithm (Matthieu Rivain, 2011) have invalid values for scalar == 1, n-1, and for regularized version n-2, which was previously not checked. Verify that they are not used as private keys. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: ecdh - add public key verification testStephan Mueller1-4/+38
According to SP800-56A section 5.6.2.1, the public key to be processed for the ECDH operation shall be checked for appropriateness. When the public key is considered to be an ephemeral key, the partial validation test as defined in SP800-56A section 5.6.2.3.4 can be applied. The partial verification test requires the presence of the field elements of a and b. For the implemented NIST curves, b is defined in FIPS 186-4 appendix D.1.2. The element a is implicitly given with the Weierstrass equation given in D.1.2 where a = p - 3. Without the test, the NIST ACVP testing fails. After adding this check, the NIST ACVP testing passes. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: ecc - Actually remove stack VLA usageKees Cook1-38/+28
On the quest to remove all VLAs from the kernel[1], this avoids VLAs by just using the maximum allocation size (4 bytes) for stack arrays. All the VLAs in ecc were either 3 or 4 bytes (or a multiple), so just make it 4 bytes all the time. Initialization routines are adjusted to check that ndigits does not end up larger than the arrays. This includes a removal of the earlier attempt at this fix from commit a963834b4742 ("crypto/ecc: Remove stack VLA usage") [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16crypto: ecc - Remove stack VLA usageKees Cook1-6/+17
On the quest to remove all VLAs from the kernel[1], this switches to a pair of kmalloc regions instead of using the stack. This also moves the get_random_bytes() after all allocations (and drops the needless "nbytes" variable). [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-29crypto: ecc - Fix NULL pointer deref. on no default_rngPierre1-1/+1
If crypto_get_default_rng returns an error, the function ecc_gen_privkey should return an error. Instead, it currently tries to use the default_rng nevertheless, thus creating a kernel panic with a NULL pointer dereference. Returning the error directly, as was supposedly intended when looking at the code, fixes this. Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecdh - add privkey generation supportTudor-Dan Ambarus1-0/+56
Add support for generating ecc private keys. Generation of ecc private keys is helpful in a user-space to kernel ecdh offload because the keys are not revealed to user-space. Private key generation is also helpful to implement forward secrecy. If the user provides a NULL ecc private key, the kernel will generate it and further use it for ecdh. Move ecdh's object files below drbg's. drbg must be present in the kernel at the time of calling. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - rename ecdh_make_pub_key()Tudor-Dan Ambarus1-2/+2
Rename ecdh_make_pub_key() to ecc_make_pub_key(). ecdh_make_pub_key() is not dh specific and the reference to dh is wrong. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - remove unnecessary castsTudor-Dan Ambarus1-15/+13
ecc software implementation works with chunks of u64 data. There were some unnecessary casts to u8 and then back to u64 for the ecc keys. This patch removes the unnecessary casts. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecc - remove unused function argumentsTudor-Dan Ambarus1-5/+3
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-24crypto: ecdh - make ecdh_shared_secret uniqueStephen Rothwell1-1/+1
There is another ecdh_shared_secret in net/bluetooth/ecc.c Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: ecdh - Add ECDH software supportSalvatore Benedetto1-0/+1018
* Implement ECDH under kpp API * Provide ECC software support for curve P-192 and P-256. * Add kpp test for ECDH with data generated by OpenSSL Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>