summaryrefslogtreecommitdiffstats
path: root/crypto/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-08-09crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVECMichael Ellerman1-1/+1
The optimised crc32c implementation depends on VMX (aka. Altivec) instructions, so the kernel must be built with Altivec support in order for the crc32c code to build. Fixes: 6dd7a82cc54e ("crypto: powerpc - Add POWER8 optimised crc32c") Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: powerpc - Add POWER8 optimised crc32cAnton Blanchard1-0/+11
Use the vector polynomial multiply-sum instructions in POWER8 to speed up crc32c. This is just over 41x faster than the slice-by-8 method that it replaces. Measurements on a 4.1 GHz POWER8 show it sustaining 52 GiB/sec. A simple btrfs write performance test: dd if=/dev/zero of=/mnt/tmpfile bs=1M count=4096 sync is over 3.7x faster. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-28crypto: sha512-mb - Enable SHA512 multibuffer supportMegha Dey1-0/+16
Add the config CRYPTO_SHA512_MB which will enable the computation using the SHA512 multi-buffer algorithm. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-27crypto: sha256-mb - Enable multibuffer supportMegha Dey1-0/+16
Add the config CRYPTO_SHA256_MB which will enable the computation using the SHA256 multi-buffer algorithm. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: ecdh - Add ECDH software supportSalvatore Benedetto1-0/+5
* Implement ECDH under kpp API * Provide ECC software support for curve P-192 and P-256. * Add kpp test for ECDH with data generated by OpenSSL Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: dh - Add DH software implementationSalvatore Benedetto1-0/+8
* Implement MPI based Diffie-Hellman under kpp API * Test provided uses data generad by OpenSSL Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: kpp - Key-agreement Protocol Primitives API (KPP)Salvatore Benedetto1-0/+10
Add key-agreement protocol primitives (kpp) API which allows to implement primitives required by protocols such as DH and ECDH. The API is composed mainly by the following functions * set_secret() - It allows the user to set his secret, also referred to as his private key, along with the parameters known to both parties involved in the key-agreement session. * generate_public_key() - It generates the public key to be sent to the other counterpart involved in the key-agreement session. The function has to be called after set_params() and set_secret() * generate_secret() - It generates the shared secret for the session Other functions such as init() and exit() are provided for allowing cryptographic hardware to be inizialized properly before use Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-20crypto: sha3 - Add SHA-3 hash algorithmJeff Garzik1-0/+10
This patch adds the implementation of SHA3 algorithm in software and it's based on original implementation pushed in patch https://lwn.net/Articles/518415/ with additional changes to match the padding rules specified in SHA-3 specification. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-15crypto: drbg - use CTR AES instead of ECB AESStephan Mueller1-0/+1
The CTR DRBG derives its random data from the CTR that is encrypted with AES. This patch now changes the CTR DRBG implementation such that the CTR AES mode is employed. This allows the use of steamlined CTR AES implementation such as ctr-aes-aesni. Unfortunately there are the following subtile changes we need to apply when using the CTR AES mode: - the CTR mode increments the counter after the cipher operation, but the CTR DRBG requires the increment before the cipher op. Hence, the crypto_inc is applied to the counter (drbg->V) once it is recalculated. - the CTR mode wants to encrypt data, but the CTR DRBG is interested in the encrypted counter only. The full CTR mode is the XOR of the encrypted counter with the plaintext data. To access the encrypted counter, the patch uses a NULL data vector as plaintext to be "encrypted". Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-05crypto: rsa - select crypto mgr dependencyTadeusz Struk1-0/+1
The pkcs1pad template needs CRYPTO_MANAGER so it needs to be explicitly selected by CRYPTO_RSA. Reported-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-17Merge branch 'linus' of ↵Linus Torvalds1-19/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "Here is the crypto update for 4.6: API: - Convert remaining crypto_hash users to shash or ahash, also convert blkcipher/ablkcipher users to skcipher. - Remove crypto_hash interface. - Remove crypto_pcomp interface. - Add crypto engine for async cipher drivers. - Add akcipher documentation. - Add skcipher documentation. Algorithms: - Rename crypto/crc32 to avoid name clash with lib/crc32. - Fix bug in keywrap where we zero the wrong pointer. Drivers: - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver. - Add PIC32 hwrng driver. - Support BCM6368 in bcm63xx hwrng driver. - Pack structs for 32-bit compat users in qat. - Use crypto engine in omap-aes. - Add support for sama5d2x SoCs in atmel-sha. - Make atmel-sha available again. - Make sahara hashing available again. - Make ccp hashing available again. - Make sha1-mb available again. - Add support for multiple devices in ccp. - Improve DMA performance in caam. - Add hashing support to rockchip" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: qat - remove redundant arbiter configuration crypto: ux500 - fix checks of error code returned by devm_ioremap_resource() crypto: atmel - fix checks of error code returned by devm_ioremap_resource() crypto: qat - Change the definition of icp_qat_uof_regtype hwrng: exynos - use __maybe_unused to hide pm functions crypto: ccp - Add abstraction for device-specific calls crypto: ccp - CCP versioning support crypto: ccp - Support for multiple CCPs crypto: ccp - Remove check for x86 family and model crypto: ccp - memset request context to zero during import lib/mpi: use "static inline" instead of "extern inline" lib/mpi: avoid assembler warning hwrng: bcm63xx - fix non device tree compatibility crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode. crypto: qat - The AE id should be less than the maximal AE number lib/mpi: Endianness fix crypto: rockchip - add hash support for crypto engine in rk3288 crypto: xts - fix compile errors crypto: doc - add skcipher API documentation crypto: doc - update AEAD AD handling ...
2016-02-01crypto: engine - Introduce the block request crypto engine frameworkBaolin Wang1-0/+3
Now block cipher engines need to implement and maintain their own queue/thread for processing requests, moreover currently helpers provided for only the queue itself (in crypto_enqueue_request() and crypto_dequeue_request()) but they don't help with the mechanics of driving the hardware (things like running the request immediately, DMA map it or providing a thread to process the queue in) even though a lot of that code really shouldn't vary that much from device to device. Thus this patch provides a mechanism for pushing requests to the hardware as it becomes free that drivers could use. And this framework is patterned on the SPI code and has worked out well there. (https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/ drivers/spi/spi.c?id=ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0) Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27crypto: jitterentropy - always select CRYPTO_RNGArnd Bergmann1-0/+1
When building the jitterentropy driver by itself, we get a link error when CRYPTO_RNG is not enabled as well: crypto/built-in.o: In function `jent_mod_init': jitterentropy-kcapi.c:(.init.text+0x98): undefined reference to `crypto_register_rng' crypto/built-in.o: In function `jent_mod_exit': jitterentropy-kcapi.c:(.exit.text+0x60): undefined reference to `crypto_unregister_rng' This adds a 'select CRYPTO_RNG' to CRYPTO_JITTERENTROPY to ensure the API is always there when it's used, not just when DRBG is also enabled. CRYPTO_DRBG would set it implicitly through CRYPTO_JITTERENTROPY now, but this leaves it in place to make it explicit what the driver does. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27crypto: compress - remove unused pcomp interfaceJoonsoo Kim1-19/+0
It is unused now, so remove it. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-26crypto: ghash,poly1305 - select CRYPTO_HASH where neededArnd Bergmann1-0/+2
The ghash and poly1305 hash implementations can be enabled when CONFIG_CRYPTO_HASH is turned off, causing a link error: crypto/built-in.o: In function `ghash_mod_init': (.init.text+0xd0): undefined reference to `crypto_register_shash' crypto/built-in.o: In function `ghash_mod_exit': (.exit.text+0xb4): undefined reference to `crypto_unregister_shash' crypto/built-in.o: In function `poly1305_mod_init': (.init.text+0xb4): undefined reference to `crypto_register_shash' crypto/built-in.o: In function `poly1305_mod_exit': (.exit.text+0x98): undefined reference to `crypto_unregister_shash' This adds an explicit 'select', like all other hashes have it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-15crypto: keywrap - enable compilationStephan Mueller1-0/+7
Hook keywrap source code into Kconfig and Makefile Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21crypto: x86/sha - Add build support for Intel SHA Extensions optimized SHA1 ↵tim1-4/+6
and SHA256 This patch provides the configuration and build support to include and build the optimized SHA1 and SHA256 update transforms for the kernel's crypto library. Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-08Merge branch 'next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - PKCS#7 support added to support signed kexec, also utilized for module signing. See comments in 3f1e1bea. ** NOTE: this requires linking against the OpenSSL library, which must be installed, e.g. the openssl-devel on Fedora ** - Smack - add IPv6 host labeling; ignore labels on kernel threads - support smack labeling mounts which use binary mount data - SELinux: - add ioctl whitelisting (see http://kernsec.org/files/lss2015/vanderstoep.pdf) - fix mprotect PROT_EXEC regression caused by mm change - Seccomp: - add ptrace options for suspend/resume" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits) PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them Documentation/Changes: Now need OpenSSL devel packages for module signing scripts: add extract-cert and sign-file to .gitignore modsign: Handle signing key in source tree modsign: Use if_changed rule for extracting cert from module signing key Move certificate handling to its own directory sign-file: Fix warning about BIO_reset() return value PKCS#7: Add MODULE_LICENSE() to test module Smack - Fix build error with bringup unconfigured sign-file: Document dependency on OpenSSL devel libraries PKCS#7: Appropriately restrict authenticated attributes and content type KEYS: Add a name for PKEY_ID_PKCS7 PKCS#7: Improve and export the X.509 ASN.1 time object decoder modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS extract-cert: Cope with multiple X.509 certificates in a single file sign-file: Generate CMS message as signature instead of PKCS#7 PKCS#7: Support CMS messages also [RFC5652] X.509: Change recorded SKID & AKID to not include Subject or Issuer PKCS#7: Check content type and versions MAINTAINERS: The keyrings mailing list has moved ...
2015-08-17crypto: null - Add missing Kconfig tristate for NULL2Herbert Xu1-0/+1
This patch adds a missing tristate statement to Kconfig for the new CRYPTO_NULL2 option. Fixes: 149a39717dcc ("crypto: aead - Add type-safe geniv init/exit helpers") Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Add type-safe geniv init/exit helpersHerbert Xu1-3/+8
This patch adds the helpers aead_init_geniv and aead_exit_geniv which are type-safe and intended the replace the existing geniv init/exit helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-14Move certificate handling to its own directoryDavid Howells1-0/+1
Move certificate handling out of the kernel/ directory and into a certs/ directory to get all the weird stuff in one place and move the generated signing keys into this directory. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05crypto: authenc - Add Kconfig dependency on CRYPTO_NULLHerbert Xu1-0/+1
CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses null for copying. Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Add a four block AVX2 variant for x86_64Martin Willi1-1/+1
Extends the x86_64 Poly1305 authenticator by a function processing four consecutive Poly1305 blocks in parallel using AVX2 instructions. For large messages, throughput increases by ~15-45% compared to two block SSE2: testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3809514 opers/sec, 365713411 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5973423 opers/sec, 573448627 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9446779 opers/sec, 906890803 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1364814 opers/sec, 393066691 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2045780 opers/sec, 589184697 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711946 opers/sec, 1069040592 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 573686 opers/sec, 605812732 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1647802 opers/sec, 1740079440 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 292970 opers/sec, 609378224 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 943229 opers/sec, 1961916528 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 494623 opers/sec, 2041804569 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 254045 opers/sec, 2089271014 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3826224 opers/sec, 367317552 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5948638 opers/sec, 571069267 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9439110 opers/sec, 906154627 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1367756 opers/sec, 393913872 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2056881 opers/sec, 592381958 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711153 opers/sec, 1068812179 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 574940 opers/sec, 607136745 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1948830 opers/sec, 2057964585 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 293308 opers/sec, 610082096 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 1235224 opers/sec, 2569267792 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 684405 opers/sec, 2825226316 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 367101 opers/sec, 3019039446 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Add a SSE2 SIMD variant for x86_64Martin Willi1-0/+12
Implements an x86_64 assembler driver for the Poly1305 authenticator. This single block variant holds the 130-bit integer in 5 32-bit words, but uses SSE to do two multiplications/additions in parallel. When calling updates with small blocks, the overhead for kernel_fpu_begin/ kernel_fpu_end() negates the perfmance gain. We therefore use the poly1305-generic fallback for small updates. For large messages, throughput increases by ~5-10% compared to poly1305-generic: testing speed of poly1305 (poly1305-generic) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20 - Add an eight block AVX2 variant for x86_64Martin Willi1-1/+1
Extends the x86_64 ChaCha20 implementation by a function processing eight ChaCha20 blocks in parallel using AVX2. For large messages, throughput increases by ~55-70% compared to four block SSSE3: testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes) test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes) test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes) test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes) test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 41999675 operations in 10 seconds (671994800 bytes) test 1 (256 bit key, 64 byte blocks): 45805908 operations in 10 seconds (2931578112 bytes) test 2 (256 bit key, 256 byte blocks): 32814947 operations in 10 seconds (8400626432 bytes) test 3 (256 bit key, 1024 byte blocks): 19777167 operations in 10 seconds (20251819008 bytes) test 4 (256 bit key, 8192 byte blocks): 2279321 operations in 10 seconds (18672197632 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64Martin Willi1-0/+15
Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This single block variant works on a single state matrix using SSE instructions. It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate operations. For large messages, throughput increases by ~65% compared to chacha20-generic: testing speed of chacha20 (chacha20-generic) encryption test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes) test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes) test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes) test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes) test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes) test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes) test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes) test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes) test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-21crypto: rsa - fix invalid select for AKCIPHERTadeusz Struk1-1/+1
Should be CRYPTO_AKCIPHER instead of AKCIPHER Reported-by: Andreas Ruprecht <andreas.ruprecht@fau.de> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17crypto: testmgr - add tests vectors for RSATadeusz Struk1-0/+1
New test vectors for RSA algorithm. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17crypto: rsa - add a new rsa generic implementationTadeusz Struk1-0/+8
Add a new rsa generic SW implementation. This implements only cryptographic primitives. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Added select on ASN1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17crypto: akcipher - add PKE APITadeusz Struk1-0/+9
Add Public Key Encryption API. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Made CRYPTO_AKCIPHER invisible like other type config options. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-11crypto: drbg - Add select on sha256Herbert Xu1-1/+2
The hash-based DRBG variants all use sha256 so we need to add a select on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: rng - Make DRBG the default RNGHerbert Xu1-7/+8
This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT that simply selects the DRBG. This new option is then selected by the IV generators. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: echainiv - Set Kconfig default to mHerbert Xu1-0/+1
As this is required by many IPsec algorithms, let's set the default to m. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539Martin Willi1-0/+12
This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and asynchronous operations, even if we currently have no async chacha20 or poly1305 drivers. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: poly1305 - Add a generic Poly1305 authenticator implementationMartin Willi1-0/+9
Poly1305 is a fast message authenticator designed by Daniel J. Bernstein. It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305 AEAD for use in IETF protocols. This is a portable C implementation of the algorithm without architecture specific optimizations, based on public domain code by Daniel J. Bernstein and Andrew Moon. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: chacha20 - Add a generic ChaCha20 stream cipher implementationMartin Willi1-0/+13
ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF protocols as a building block for the ChaCha20-Poly1305 AEAD. This is a portable C implementation without any architecture specific optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce prepended by the initial block counter. Some algorithms require an explicit counter value, for example the mentioned AEAD construction. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03Revert "crypto: algif_aead - Disable AEAD user-space for now"Herbert Xu1-0/+9
This reverts commit f858c7bcca8c20761a20593439fe998b4b67e86b as the algif_aead interface has been switched over to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu1-9/+0
Merge the crypto tree for 4.1 to pull in the changeset that disables algif_aead.
2015-05-27crypto: jitterentropy - add jitterentropy RNGStephan Mueller1-0/+10
The CPU Jitter RNG provides a source of good entropy by collecting CPU executing time jitter. The entropy in the CPU execution time jitter is magnified by the CPU Jitter Random Number Generator. The CPU Jitter Random Number Generator uses the CPU execution timing jitter to generate a bit stream which complies with different statistical measurements that determine the bit stream is random. The CPU Jitter Random Number Generator delivers entropy which follows information theoretical requirements. Based on these studies and the implementation, the caller can assume that one bit of data extracted from the CPU Jitter Random Number Generator holds one bit of entropy. The CPU Jitter Random Number Generator provides a decentralized source of entropy, i.e. every caller can operate on a private state of the entropy pool. The RNG does not have any dependencies on any other service in the kernel. The RNG only needs a high-resolution time stamp. Further design details, the cryptographic assessment and large array of test results are documented at http://www.chronox.de/jent.html. CC: Andreas Steffen <andreas.steffen@strongswan.org> CC: Theodore Ts'o <tytso@mit.edu> CC: Sandy Harris <sandyinchina@gmail.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-26crypto: algif_aead - Disable AEAD user-space for nowHerbert Xu1-9/+0
The newly added AEAD user-space isn't quite ready for prime time just yet. In particular it is conflicting with the AEAD single SG list interface change so this patch disables it now. Once the SG list stuff is completely done we can then renable this interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22crypto: echainiv - Add encrypted chain IV generatorHerbert Xu1-0/+10
This patch adds a new AEAD IV generator echainiv. It is intended to replace the existing skcipher IV generator eseqiv. If the underlying AEAD algorithm is using the old AEAD interface, then echainiv will simply use its IV generator. Otherwise, echainiv will encrypt a counter just like eseqiv but it'll first xor it against a previously stored IV similar to chainiv. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22crypto: seqiv - Add support for new AEAD interfaceHerbert Xu1-0/+1
This patch converts the seqiv IV generator to work with the new AEAD interface where IV generators are just normal AEAD algorithms. Full backwards compatibility is paramount at this point since no users have yet switched over to the new interface. Nor can they switch to the new interface until IV generation is fully supported by it. So this means we are adding two versions of seqiv alongside the existing one. The first one is the one that will be used when the underlying AEAD algorithm has switched over to the new AEAD interface. The second one handles the current case where the underlying AEAD algorithm still uses the old interface. Both versions export themselves through the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-11crypto: 842 - change 842 alg to use softwareDan Streetman1-4/+3
Change the crypto 842 compression alg to use the software 842 compression and decompression library. Add the crypto driver_name as "842-generic". Remove the fallback to LZO compression. Previously, this crypto compression alg attemped 842 compression using PowerPC hardware, and fell back to LZO compression and decompression if the 842 PowerPC hardware was unavailable or failed. This should not fall back to any other compression method, however; users of this crypto compression alg can fallback if desired, and transparent fallback tricks callers into thinking they are getting 842 compression when they actually get LZO compression - the failure of the 842 hardware should not be transparent to the caller. The crypto compression alg for a hardware device also should not be located in crypto/ so this is now a software-only implementation that uses the 842 software compression/decompression library. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-07crypto: serpent_sse2 - Fix a typo in KconfigMasanari Iida1-1/+1
This patch fix a spelling typo in crypto/Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12crypto: arm - move ARM specific Kconfig definitions to a dedicated fileArd Biesheuvel1-75/+0
This moves all Kconfig symbols defined in crypto/Kconfig that depend on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is where the code that implements those features resides as well. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10crypto: octeon - enable OCTEON SHA1/256/512 module selectionAaro Koskinen1-0/+27
Enable user to select OCTEON SHA1/256/512 modules. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04crypto: powerpc/md5 - kernel configMarkus Stockhausen1-0/+8
Integrate the module into the kernel config tree. Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04crypto: algif - enable AEAD interface compilationStephan Mueller1-0/+9
Enable compilation of the AEAD AF_ALG support and provide a Kconfig option to compile the AEAD AF_ALG support. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-02crypto: powerpc/sha1 - kernel configMarkus Stockhausen1-0/+7
Integrate the module into the kernel config tree. Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-01crypto: powerpc/aes - kernel configMarkus Stockhausen1-0/+13
Integrate the module into the kernel configuration Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 15:37:23 +0000