summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-04-07blk-mq: Restart a single queue if tag sets are sharedBart Van Assche3-26/+55
To improve scalability, if hardware queues are shared, restart a single hardware queue in round-robin fashion. Rename blk_mq_sched_restart_queues() to reflect the new semantics. Remove blk_mq_sched_mark_restart_queue() because this function has no callers. Remove flag QUEUE_FLAG_RESTART because this patch removes the code that uses this flag. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq: Introduce blk_mq_delay_run_hw_queue()Bart Van Assche1-2/+30
Introduce a function that runs a hardware queue unconditionally after a delay. Note: there is already a function that stops and restarts a hardware queue after a delay, namely blk_mq_delay_queue(). This function will be used in the next patch in this series. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Long Li <longli@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq: remap queues when adding/removing hardware queuesOmar Sandoval1-4/+10
blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the behavior that drivers expect. However, commit 4e68a011428a changed blk_mq_queue_reinit() to not remap queues for the case of CPU hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap queues as well. This breaks, for example, NBD's multi-connection mode, leaving the added hardware queues unused. Fix it by making blk_mq_update_nr_hw_queues() explicitly remap the queues. Fixes: 4e68a011428a ("blk-mq: don't redistribute hardware queues on a CPU hotplug event") Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq-sched: fix crash in switch error pathOmar Sandoval5-47/+66
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall back to the original scheduler. However, at this point, we've already torn down the original scheduler's tags, so this causes a crash. Doing the fallback like the legacy elevator path is much harder for mq, so fix it by just falling back to none, instead. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq-sched: set up scheduler tags when bringing up new queuesOmar Sandoval3-1/+35
If a new hardware queue is added at runtime, we don't allocate scheduler tags for it, leading to a crash. This hooks up the scheduler framework to blk_mq_{init,exit}_hctx() to make sure everything gets properly initialized/freed. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq-sched: refactor scheduler initializationOmar Sandoval3-59/+57
Preparation cleanup for the next couple of fixes, push blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq: use the right hctx when getting a driver tag failsOmar Sandoval3-17/+19
While dispatching requests, if we fail to get a driver tag, we mark the hardware queue as waiting for a tag and put the requests on a hctx->dispatch list to be run later when a driver tag is freed. However, blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware queues if using a single-queue scheduler with a multiqueue device. If blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we are processing. This means we end up using the hardware queue of the previous request, which may or may not be the same as that of the current request. If it isn't, the wrong hardware queue will end up waiting for a tag, and the requests will be on the wrong dispatch list, leading to a hang. The fix is twofold: 1. Make sure we save which hardware queue we were trying to get a request for in blk_mq_get_driver_tag() regardless of whether it succeeds or not. 2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a blk_mq_hw_queue to make it clear that it must handle multiple hardware queues, since I've already messed this up on a couple of occasions. This didn't appear in testing with nvme and mq-deadline because nvme has more driver tags than the default number of scheduler tags. However, with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-30block: do not put mq context in blk_mq_alloc_request_hctxMinchan Kim1-1/+0
In blk_mq_alloc_request_hctx, blk_mq_sched_get_request doesn't get sw context so we don't need to put the context with blk_mq_put_ctx. Unless, we will see preempt counter underflow. Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-24blk-mq: include errors in did_work calculationJens Axboe1-3/+4
Currently we return true in blk_mq_dispatch_rq_list() if we queued IO successfully, but we really want to return whether or not the we made progress. Progress includes if we got an error return. If we don't, this can lead to a hang in blk_mq_sched_dispatch_requests() when a driver is draining IO by returning BLK_MQ_QUEUE_ERROR instead of manually ending the IO in error and return BLK_MQ_QUEUE_OK. Tested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22blk-mq: don't complete un-started request in timeout handlerMing Lei1-10/+1
When iterating busy requests in timeout handler, if the STARTED flag of one request isn't set, that means the request is being processed in block layer or driver, and isn't submitted to hardware yet. In current implementation of blk_mq_check_expired(), if the request queue becomes dying, un-started requests are handled as being completed/freed immediately. This way is wrong, and can cause rq corruption or double allocation[1][2], when doing I/O and removing&resetting NVMe device at the sametime. This patch fixes several issues reported by Yi Zhang. [1]. oops log 1 [ 581.789754] ------------[ cut here ]------------ [ 581.789758] kernel BUG at block/blk-mq.c:374! [ 581.789760] invalid opcode: 0000 [#1] SMP [ 581.789761] Modules linked in: vfat fat ipmi_ssif intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm nvme irqbypass crct10dif_pclmul nvme_core crc32_pclmul ghash_clmulni_intel intel_cstate ipmi_si mei_me ipmi_devintf intel_uncore sg ipmi_msghandler intel_rapl_perf iTCO_wdt mei iTCO_vendor_support mxm_wmi lpc_ich dcdbas shpchp pcspkr acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd dm_multipath grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel tg3 libata megaraid_sas i2c_core ptp fjes pps_core dm_mirror dm_region_hash dm_log dm_mod [ 581.789796] CPU: 1 PID: 1617 Comm: kworker/1:1H Not tainted 4.10.0.bz1420297+ #4 [ 581.789797] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 581.789804] Workqueue: kblockd blk_mq_timeout_work [ 581.789806] task: ffff8804721c8000 task.stack: ffffc90006ee4000 [ 581.789809] RIP: 0010:blk_mq_end_request+0x58/0x70 [ 581.789810] RSP: 0018:ffffc90006ee7d50 EFLAGS: 00010202 [ 581.789811] RAX: 0000000000000001 RBX: ffff8802e4195340 RCX: ffff88028e2f4b88 [ 581.789812] RDX: 0000000000001000 RSI: 0000000000001000 RDI: 0000000000000000 [ 581.789813] RBP: ffffc90006ee7d60 R08: 0000000000000003 R09: ffff88028e2f4b00 [ 581.789814] R10: 0000000000001000 R11: 0000000000000001 R12: 00000000fffffffb [ 581.789815] R13: ffff88042abe5780 R14: 000000000000002d R15: ffff88046fbdff80 [ 581.789817] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000 [ 581.789818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 581.789819] CR2: 00007f64f403a008 CR3: 000000014d078000 CR4: 00000000001406e0 [ 581.789820] Call Trace: [ 581.789825] blk_mq_check_expired+0x76/0x80 [ 581.789828] bt_iter+0x45/0x50 [ 581.789830] blk_mq_queue_tag_busy_iter+0xdd/0x1f0 [ 581.789832] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789833] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789840] ? __switch_to+0x140/0x450 [ 581.789841] blk_mq_timeout_work+0x88/0x170 [ 581.789845] process_one_work+0x165/0x410 [ 581.789847] worker_thread+0x137/0x4c0 [ 581.789851] kthread+0x101/0x140 [ 581.789853] ? rescuer_thread+0x3b0/0x3b0 [ 581.789855] ? kthread_park+0x90/0x90 [ 581.789860] ret_from_fork+0x2c/0x40 [ 581.789861] Code: 48 85 c0 74 0d 44 89 e6 48 89 df ff d0 5b 41 5c 5d c3 48 8b bb 70 01 00 00 48 85 ff 75 0f 48 89 df e8 7d f0 ff ff 5b 41 5c 5d c3 <0f> 0b e8 71 f0 ff ff 90 eb e9 0f 1f 40 00 66 2e 0f 1f 84 00 00 [ 581.789882] RIP: blk_mq_end_request+0x58/0x70 RSP: ffffc90006ee7d50 [ 581.789889] ---[ end trace bcaf03d9a14a0a70 ]--- [2]. oops log2 [ 6984.857362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6984.857372] IP: nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857373] PGD 0 [ 6984.857374] [ 6984.857376] Oops: 0000 [#1] SMP [ 6984.857379] Modules linked in: ipmi_ssif vfat fat intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_si iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_devintf intel_cstate sg dcdbas intel_uncore mei_me intel_rapl_perf mei pcspkr lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss dm_multipath nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crc32c_intel sysimgblt fb_sys_fops ttm nvme drm nvme_core ahci libahci i2c_core tg3 libata ptp megaraid_sas pps_core fjes dm_mirror dm_region_hash dm_log dm_mod [ 6984.857416] CPU: 7 PID: 1635 Comm: kworker/7:1H Not tainted 4.10.0-2.el7.bz1420297.x86_64 #1 [ 6984.857417] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 6984.857427] Workqueue: kblockd blk_mq_run_work_fn [ 6984.857429] task: ffff880476e3da00 task.stack: ffffc90002e90000 [ 6984.857432] RIP: 0010:nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857433] RSP: 0018:ffffc90002e93c50 EFLAGS: 00010246 [ 6984.857434] RAX: 0000000000000000 RBX: ffff880275646600 RCX: 0000000000001000 [ 6984.857435] RDX: 0000000000000fff RSI: 00000002fba2a000 RDI: ffff8804734e6950 [ 6984.857436] RBP: ffffc90002e93d30 R08: 0000000000002000 R09: 0000000000001000 [ 6984.857437] R10: 0000000000001000 R11: 0000000000000000 R12: ffff8804741d8000 [ 6984.857438] R13: 0000000000000040 R14: ffff880475649f80 R15: ffff8804734e6780 [ 6984.857439] FS: 0000000000000000(0000) GS:ffff88047fcc0000(0000) knlGS:0000000000000000 [ 6984.857440] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6984.857442] CR2: 0000000000000010 CR3: 0000000001c09000 CR4: 00000000001406e0 [ 6984.857443] Call Trace: [ 6984.857451] ? mempool_free+0x2b/0x80 [ 6984.857455] ? bio_free+0x4e/0x60 [ 6984.857459] blk_mq_dispatch_rq_list+0xf5/0x230 [ 6984.857462] blk_mq_process_rq_list+0x133/0x170 [ 6984.857465] __blk_mq_run_hw_queue+0x8c/0xa0 [ 6984.857467] blk_mq_run_work_fn+0x12/0x20 [ 6984.857473] process_one_work+0x165/0x410 [ 6984.857475] worker_thread+0x137/0x4c0 [ 6984.857478] kthread+0x101/0x140 [ 6984.857480] ? rescuer_thread+0x3b0/0x3b0 [ 6984.857481] ? kthread_park+0x90/0x90 [ 6984.857489] ret_from_fork+0x2c/0x40 [ 6984.857490] Code: 8b bd 70 ff ff ff 89 95 50 ff ff ff 89 8d 58 ff ff ff 44 89 95 60 ff ff ff e8 b7 dd 12 e1 8b 95 50 ff ff ff 48 89 85 68 ff ff ff <4c> 8b 48 10 44 8b 58 18 8b 8d 58 ff ff ff 44 8b 95 60 ff ff ff [ 6984.857511] RIP: nvme_queue_rq+0x6e6/0x8cd [nvme] RSP: ffffc90002e93c50 [ 6984.857512] CR2: 0000000000000010 [ 6984.895359] ---[ end trace 2d7ceb528432bf83 ]--- Cc: stable@vger.kernel.org Reported-by: Yi Zhang <yizhan@redhat.com> Tested-by: Yi Zhang <yizhan@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-16blk-stat: fix blk_stat_sum() if all samples are batchedOmar Sandoval1-2/+2
We need to flush the batch _before_ we check the number of samples, otherwise we'll miss all of the batched samples. Fixes: cf43e6b ("block: add scalable completion tracking of requests") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-14blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly()Jens Axboe1-4/+5
If we have scheduling enabled, we jump directly to insert-and-run. That's fine, but we run the queue async and we don't pass in information on whether we can block from this context or not. Fixup both these cases. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-13blk-mq: Fix tagset reinit in the presence of cpu hot-unplugSagi Grimberg1-0/+3
In case cpu was unplugged, we need to make sure not to assume that the tags for that cpu are still allocated. so check for null tags when reinitializing a tagset. Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-11blk: Ensure users for current->bio_list can see the full list.NeilBrown2-15/+27
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk: improve order of bio handling in generic_make_request()NeilBrown1-4/+21
To avoid recursion on the kernel stack when stacked block devices are in use, generic_make_request() will, when called recursively, queue new requests for later handling. They will be handled when the make_request_fn for the current bio completes. If any bios are submitted by a make_request_fn, these will ultimately be handled seqeuntially. If the handling of one of those generates further requests, they will be added to the end of the queue. This strict first-in-first-out behaviour can lead to deadlocks in various ways, normally because a request might need to wait for a previous request to the same device to complete. This can happen when they share a mempool, and can happen due to interdependencies particular to the device. Both md and dm have examples where this happens. These deadlocks can be erradicated by more selective ordering of bios. Specifically by handling them in depth-first order. That is: when the handling of one bio generates one or more further bios, they are handled immediately after the parent, before any siblings of the parent. That way, when generic_make_request() calls make_request_fn for some particular device, we can be certain that all previously submited requests for that device have been completely handled and are not waiting for anything in the queue of requests maintained in generic_make_request(). An easy way to achieve this would be to use a last-in-first-out stack instead of a queue. However this will change the order of consecutive bios submitted by a make_request_fn, which could have unexpected consequences. Instead we take a slightly more complex approach. A fresh queue is created for each call to a make_request_fn. After it completes, any bios for a different device are placed on the front of the main queue, followed by any bios for the same device, followed by all bios that were already on the queue before the make_request_fn was called. This provides the depth-first approach without reordering bios on the same level. This, by itself, it not enough to remove all deadlocks. It just makes it possible for drivers to take the extra step required themselves. To avoid deadlocks, drivers must never risk waiting for a request after submitting one to generic_make_request. This includes never allocing from a mempool twice in the one call to a make_request_fn. A common pattern in drivers is to call bio_split() in a loop, handling the first part and then looping around to possibly split the next part. Instead, a driver that finds it needs to split a bio should queue (with generic_make_request) the second part, handle the first part, and then return. The new code in generic_make_request will ensure the requests to underlying bios are processed first, then the second bio that was split off. If it splits again, the same process happens. In each case one bio will be completely handled before the next one is attempted. With this is place, it should be possible to disable the punt_bios_to_recover() recovery thread for many block devices, and eventually it may be possible to remove it completely. Ref: http://www.spinics.net/lists/raid/msg54680.html Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com> Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08Revert "scsi, block: fix duplicate bdi name registration crashes"Jan Kara2-23/+0
This reverts commit 0dba1314d4f81115dce711292ec7981d17231064. It causes leaking of device numbers for SCSI when SCSI registers multiple gendisks for one request_queue in succession. It can be easily reproduced using Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE. Furthermore the protection provided by this commit is not needed anymore as the problem it was fixing got also fixed by commit 165a5e22fafb "block: Move bdi_unregister() to del_gendisk()". [1]: http://marc.info/?l=linux-block&m=148554717109098&w=2 Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08block: Make del_gendisk() safer for disks without queuesJan Kara1-6/+10
Commit 165a5e22fafb "block: Move bdi_unregister() to del_gendisk()" added disk->queue dereference to del_gendisk(). Although del_gendisk() is not supposed to be called without disk->queue valid and blk_unregister_queue() warns in that case, this change will make it oops instead. Return to the old more robust behavior of just warning when del_gendisk() gets called for gendisk with disk->queue being NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08block/sed: Fix opal user range check and unused variablesJon Derrick1-8/+2
Fixes check that the opal user is within the range, and cleans up unused method variables. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: free hctx->cpumask in release handler of hctx's kobjectMing Lei2-12/+1
It is obviously that hctx->cpumask is per hctx, and both share same lifetime, so this patch moves freeing of hctx->cpumask into release handler of hctx's kobject. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: make lifetime consistent between hctx and its kobjectMing Lei2-9/+11
This patch removes kobject_put() over hctx in __blk_mq_unregister_dev(), and trys to keep lifetime consistent between hctx and hctx's kobject. Now blk_mq_sysfs_register() and blk_mq_sysfs_unregister() become totally symmetrical, and kobject's refcounter drops to zero just when the hctx is freed. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: make lifetime consitent between q/ctx and its kobjectMing Lei3-8/+20
Currently from kobject view, both q->mq_kobj and ctx->kobj can be released during one cycle of blk_mq_register_dev() and blk_mq_unregister_dev(). Actually, sw queue's lifetime is same with its request queue's, which is covered by request_queue->kobj. So we don't need to call kobject_put() for the two kinds of kobject in __blk_mq_unregister_dev(), instead we do that in release handler of request queue. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()Ming Lei3-4/+5
Both q->mq_kobj and sw queues' kobjects should have been initialized once, instead of doing that each add_disk context. Also this patch removes clearing of ctx in blk_mq_init_cpu_queues() because percpu allocator fills zero to allocated variable. This patch fixes one issue[1] reported from Omar. [1] kernel wearning when doing unbind/bind on one scsi-mq device [ 19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong. [ 19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34 [ 19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014 [ 19.350920] Workqueue: events_unbound async_run_entry_fn [ 19.350920] Call Trace: [ 19.350920] dump_stack+0x63/0x83 [ 19.350920] kobject_init+0x77/0x90 [ 19.350920] blk_mq_register_dev+0x40/0x130 [ 19.350920] blk_register_queue+0xb6/0x190 [ 19.350920] device_add_disk+0x1ec/0x4b0 [ 19.350920] sd_probe_async+0x10d/0x1c0 [sd_mod] [ 19.350920] async_run_entry_fn+0x48/0x150 [ 19.350920] process_one_work+0x1d0/0x480 [ 19.350920] worker_thread+0x48/0x4e0 [ 19.350920] kthread+0x101/0x140 [ 19.350920] ? process_one_work+0x480/0x480 [ 19.350920] ? kthread_create_on_node+0x60/0x60 [ 19.350920] ret_from_fork+0x2c/0x40 Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-03Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds10-70/+138
Pull block layer fixes from Jens Axboe: "A collection of fixes for this merge window, either fixes for existing issues, or parts that were waiting for acks to come in. This pull request contains: - Allocation of nvme queues on the right node from Shaohua. This was ready long before the merge window, but waiting on an ack from Bjorn on the PCI bit. Now that we have that, the three patches can go in. - Two fixes for blk-mq-sched with nvmeof, which uses hctx specific request allocations. This caused an oops. One part from Sagi, one part from Omar. - A loop partition scan deadlock fix from Omar, fixing a regression in this merge window. - A three-patch series from Keith, closing up a hole on clearing out requests on shutdown/resume. - A stable fix for nbd from Josef, fixing a leak of sockets. - Two fixes for a regression in this window from Jan, fixing a problem with one of his earlier patches dealing with queue vs bdi life times. - A fix for a regression with virtio-blk, causing an IO stall if scheduling is used. From me. - A fix for an io context lock ordering problem. From me" * 'for-linus' of git://git.kernel.dk/linux-block: block: Move bdi_unregister() to del_gendisk() blk-mq: ensure that bd->last is always set correctly block: don't call ioc_exit_icq() with the queue lock held for blk-mq block: Initialize bd_bdi on inode initialization loop: fix LO_FLAGS_PARTSCAN hang nvme: Complete all stuck requests blk-mq: Provide freeze queue timeout blk-mq: Export blk_mq_freeze_queue_wait nbd: stop leaking sockets blk-mq: move update of tags->rqs to __blk_mq_alloc_request() blk-mq: kill blk_mq_set_alloc_data() blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset nvme: allocate nvme_queue in correct node PCI: add an API to get node from vector blk-mq: allocate blk_mq_tags and requests in correct node
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds7-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-02block: Move bdi_unregister() to del_gendisk()Jan Kara2-1/+5
Commit 6cd18e711dd8 "block: destroy bdi before blockdev is unregistered." moved bdi unregistration (at that time through bdi_destroy()) from blk_release_queue() to blk_cleanup_queue() because it needs to happen before blk_unregister_region() call in del_gendisk() for MD. SCSI though will free up the device number from sd_remove() called through a maze of callbacks from device_del() in __scsi_remove_device() before blk_cleanup_queue() and thus similar races as described in 6cd18e711dd8 can happen for SCSI as well as reported by Omar [1]. Moving bdi_unregister() to del_gendisk() works for MD and fixes the problem for SCSI since del_gendisk() gets called from sd_remove() before freeing the device number. This also makes device_add_disk() (calling bdi_register_owner()) more symmetric with del_gendisk(). [1] http://marc.info/?l=linux-block&m=148554717109098&w=2 Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-0/+60
Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace
2017-03-02blk-mq: ensure that bd->last is always set correctlyJens Axboe1-7/+43
When drivers are called with a request in blk-mq, blk-mq flags the state such that the driver knows if this is the last request in this call chain or not. The driver can then use that information to defer kicking off IO until bd->last is true. However, with blk-mq and scheduling, we need to allocate a driver tag for a request before it can be issued. If we fail to allocate such a tag, we could end up in the situation where the last request issued did not have bd->last == true set. This can then cause a driver hang. This fixes a hang with virtio-blk, which uses bd->last as a hint on whether to kick the queue or not. Reported-by: Chris Mason <clm@fb.com> Tested-by: Chris Mason <clm@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02block: don't call ioc_exit_icq() with the queue lock held for blk-mqJens Axboe3-17/+31
For legacy scheduling, we always call ioc_exit_icq() with both the ioc and queue lock held. This poses a problem for blk-mq with scheduling, since the queue lock isn't what we use in the scheduler. And since we don't need the queue lock held for ioc exit there, don't grab it and leave any extra locking up to the blk-mq scheduler. Reported-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02blk-mq: Provide freeze queue timeoutKeith Busch1-0/+9
A driver may wish to take corrective action if queued requests do not complete within a set time. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02blk-mq: Export blk_mq_freeze_queue_waitKeith Busch1-1/+2
Drivers can start a freeze, so this provides a way to wait for frozen. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02blk-mq: move update of tags->rqs to __blk_mq_alloc_request()Omar Sandoval2-2/+1
No functional difference, it just makes a little more sense to update the tag map where we actually allocate the tag. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com> Tested-by: Sagi Grimberg <sagi@grimberg.me>
2017-03-02blk-mq: kill blk_mq_set_alloc_data()Omar Sandoval1-10/+0
Nothing is using it anymore. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com> Tested-by: Sagi Grimberg <sagi@grimberg.me>
2017-03-02blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler requestOmar Sandoval2-24/+20
blk_mq_alloc_request_hctx() allocates a driver request directly, unlike its blk_mq_alloc_request() counterpart. It also crashes because it doesn't update the tags->rqs map. Fix it by making it allocate a scheduler request. Reported-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com> Tested-by: Sagi Grimberg <sagi@grimberg.me>
2017-03-02blk-mq-sched: Allocate sched reserved tags as specified in the original ↵Sagi Grimberg4-2/+12
queue tagset Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Modified by me to also check at driver tag allocation time if the original request was reserved, so we can be sure to allocate a properly reserved tag at that point in time, too. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02blk-mq: allocate blk_mq_tags and requests in correct nodeShaohua Li1-6/+15
blk_mq_tags/requests of specific hardware queue are mostly used in specific cpus, which might not be in the same numa node as disk. For example, a nvme card is in node 0. half hardware queue will be used by node 0, the other node 1. Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02sched/headers: Prepare to move the task_lock()/unlock() APIs to ↵Ingo Molnar2-0/+2
<linux/sched/task.h> But first update the code that uses these facilities with the new header. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2-0/+2
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/user.h> We are going to split <linux/sched/user.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/user.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/topology.h> We are going to split <linux/sched/topology.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/topology.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-3/+3
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "embeded" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: embeded||embedded Link: http://lkml.kernel.org/r/1481573103-11329-12-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27blk-mq: provide a default queue mapping for virtio deviceChristoph Hellwig3-0/+60
Similar to the PCI version, just calling into virtio instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-24Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-13/+48
Pull md updates from Shaohua Li: "Mainly fixes bugs and improves performance: - Improve scalability for raid1 from Coly - Improve raid5-cache read performance, disk efficiency and IO pattern from Song and me - Fix a race condition of disk hotplug for linear from Coly - A few cleanup patches from Ming and Byungchul - Fix a memory leak from Neil - Fix WRITE SAME IO failure from me - Add doc for raid5-cache from me" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (23 commits) md/raid1: fix write behind issues introduced by bio_clone_bioset_partial md/raid1: handle flush request correctly md/linear: shutup lockdep warnning md/raid1: fix a use-after-free bug RAID1: avoid unnecessary spin locks in I/O barrier code RAID1: a new I/O barrier implementation to remove resync window md/raid5: Don't reinvent the wheel but use existing llist API md: fast clone bio in bio_clone_mddev() md: remove unnecessary check on mddev md/raid1: use bio_clone_bioset_partial() in case of write behind md: fail if mddev->bio_set can't be created block: introduce bio_clone_bioset_partial() md: disable WRITE SAME if it fails in underlayer disks md/raid5-cache: exclude reclaiming stripes in reclaim check md/raid5-cache: stripe reclaim only counts valid stripes MD: add doc for raid5-cache Documentation: move MD related doc into a separate dir md: ensure md devices are freed before module is unloaded. md/r5cache: improve journal device efficiency md/r5cache: enable chunk_aligned_read with write back cache ...
2017-02-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds7-410/+353
Pull block updates and fixes from Jens Axboe: - NVMe updates and fixes that missed the first pull request. This includes bug fixes, and support for autonomous power management. - Fix from Christoph for missing clear of the request payload, causing a problem with (at least) the storvsc driver. - Further fixes for the queue/bdi life time issues from Jan. - The Kconfig mq scheduler update from me. - Fixing a use-after-free in dm-rq, spotted by Bart, introduced in this merge window. - Three fixes for nbd from Josef. - Bug fix from Omar, fixing a bug in sas transport code that oopses when bsg ioctls were used. From Omar. - Improvements to the queue restart and tag wait from from Omar. - Set of fixes for the sed/opal code from Scott. - Three trivial patches to cciss from Tobin * 'for-linus' of git://git.kernel.dk/linux-block: (41 commits) dm-rq: don't dereference request payload after ending request blk-mq-sched: separate mark hctx and queue restart operations blk-mq: use sbq wait queues instead of restart for driver tags block/sed-opal: Propagate original error message to userland. nvme/pci: re-check security protocol support after reset block/sed-opal: Introduce free_opal_dev to free the structure and clean up state nvme: detect NVMe controller in recent MacBooks nvme-rdma: add support for host_traddr nvmet-rdma: Fix error handling nvmet-rdma: use nvme cm status helper nvme-rdma: move nvme cm status helper to .h file nvme-fc: don't bother to validate ioccsz and iorcsz nvme/pci: No special case for queue busy on IO nvme/core: Fix race kicking freed request_queue nvme/pci: Disable on removal when disconnected nvme: Enable autonomous power state transitions nvme: Add a quirk mechanism that uses identify_ctrl nvme: make nvmf_register_transport require a create_ctrl callback nvme: Use CNS as 8-bit field and avoid endianness conversion nvme: add semicolon in nvme_command setting ...
2017-02-23blk-mq-sched: separate mark hctx and queue restart operationsOmar Sandoval2-20/+26
In blk_mq_sched_dispatch_requests(), we call blk_mq_sched_mark_restart() after we dispatch requests left over on our hardware queue dispatch list. This is so we'll go back and dispatch requests from the scheduler. In this case, it's only necessary to restart the hardware queue that we are running; there's no reason to run other hardware queues just because we are using shared tags. So, split out blk_mq_sched_mark_restart() into two operations, one for just the hardware queue and one for the whole request queue. The core code only needs the hctx variant, but I/O schedulers will want to use both. This also requires adjusting blk_mq_sched_restart_queues() to always check the queue restart flag, not just when using shared tags. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-23blk-mq: use sbq wait queues instead of restart for driver tagsOmar Sandoval1-9/+55
Commit 50e1dab86aa2 ("blk-mq-sched: fix starvation for multiple hardware queues and shared tags") fixed one starvation issue for shared tags. However, we can still get into a situation where we fail to allocate a tag because all tags are allocated but we don't have any pending requests on any hardware queue. One solution for this would be to restart all queues that share a tag map, but that really sucks. Ideally, we could just block and wait for a tag, but that isn't always possible from blk_mq_dispatch_rq_list(). However, we can still use the struct sbitmap_queue wait queues with a custom callback instead of blocking. This has a few benefits: 1. It avoids iterating over all hardware queues when completing an I/O, which the current restart code has to do. 2. It benefits from the existing rolling wakeup code. 3. It avoids punting to another thread just to have it block. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-23block/sed-opal: Propagate original error message to userland.Scott Bauer1-2/+5
During an error on a comannd, ex: user provides wrong pw to unlock range, we will gracefully terminate the opal session. We want to propagate the original error to userland instead of the result of the session termination, which is almost always a success. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 14:55:05 +0000