summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-05-26Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linusJens Axboe1-19/+0
Christoph writes: "A couple of fixes for the next rc on the nvme front. Various FC fixes from James, controller removal fixes from Ming (including a block layer patch), a APST related device quirk from Andy, a RDMA fix for small queue depth device from Marta, as well as fixes for the lack of metadata support in non-PCIe drivers and the printk logging format from me."
2017-05-26blk-mq: Only register debugfs attributes for blk-mq queuesBart Van Assche1-3/+3
The code in blk-mq-debugfs.c assumes that it is working on a blk-mq queue and is not intended to work on a blk-sq queue. Hence only register blk-mq debugfs attributes for blk-mq queues. Fixes: commit 9c1051aacde8 ("blk-mq: untangle debugfs and sysfs") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-23partitions/msdos: FreeBSD UFS2 file systems are not recognizedRichard1-0/+2
The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD and NetBSD partitions and does a reasonable job picking out OpenBSD and NetBSD UFS subpartitions. But for FreeBSD the subpartitions are always "bad". Kernel: <bsd:bad subpartition - ignored Though all 3 of these BSD systems use UFS as a file system, only FreeBSD uses relative start addresses in the subpartition declarations. The following patch fixes this for FreeBSD partitions and leaves the code for OpenBSD and NetBSD intact: Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-23block: fix an error code in add_partition()Dan Carpenter1-1/+3
We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: force user to configure all settings for io.lowShaohua Li1-43/+37
Default value of io.low limit is 0. If user doesn't configure the limit, last patch makes cgroup be throttled to very tiny bps/iops, which could stall the system. A cgroup with default settings of io.low limit really means nothing, so we force user to configure all settings, otherwise io.low limit doesn't take effect. With this stragety, default setting of latency/idle isn't important, so just set them to very conservative and safe value. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: respect 0 bps/iops settings for io.lowShaohua Li1-12/+29
If a cgroup with low limit 0 for both bps/iops, the cgroup's low limit is ignored and we throttle the cgroup with its max limit. In this way, other cgroups with a low limit will not get protected. To fix this, we don't do the exception any more. cgroup will be throttled to a limit 0 if it uese default setting. To avoid completed stall, we give such cgroup tiny IO resources. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: output some debug info in traceShaohua Li1-1/+14
These info are important to understand what's happening and help debug. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: add hierarchy support for latency target and idle timeShaohua Li1-14/+36
For idle time, children's setting should not be bigger than parent's. For latency target, children's setting should not be smaller than parent's. The leaf nodes will adjust their settings according to the hierarchy and compare their IO with the settings and do upgrade/downgrade. parents nodes don't need to track their IO latency/idle time. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-mq: remove blk_mq_abort_requeue_list()Ming Lei1-19/+0
No one uses it any more, so remove it. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-12Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Incremental fixes and a small feature addition on top of the main libnvdimm 4.12 pull request: - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX. The size regression is fixed by moving all dax helpers into the dax-core and only specifying "select DAX" for FS_DAX and dax-capable drivers. He also asked for clarification of the NR_DEV_DAX config option which, on closer look, does not need to be a config option at all. Mike also throws in a DEV_DAX_PMEM fixup for good measure. - Ben's attention to detail on -stable patch submissions caught a case where the recent fixes to arch_copy_from_iter_pmem() missed a condition where we strand dirty data in the cache. This is tagged for -stable and will also be included in the rework of the pmem api to a proposed {memcpy,copy_user}_flushcache() interface for 4.13. - Vishal adds a feature that missed the initial pull due to pending review feedback. It allows the kernel to clear media errors when initializing a BTT (atomic sector update driver) instance on a pmem namespace. - Ross noticed that the dax_device + dax_operations conversion broke __dax_zero_page_range(). The nvdimm unit tests fail to check this path, but xfstests immediately trips over it. No excuse for missing this before submitting the 4.12 pull request. These all pass the nvdimm unit tests and an xfstests spot check. The set has received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: filesystem-dax: fix broken __dax_zero_page_range() conversion libnvdimm, btt: ensure that initializing metadata clears poison libnvdimm: add an atomic vs process context flag to rw_bytes x86, pmem: Fix cache flushing for iovec write < 8 bytes device-dax: kill NR_DEV_DAX block, dax: move "select DAX" from BLOCK to FS_DAX device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
2017-05-11block: handle partial completions for special payload requestsChristoph Hellwig1-12/+12
SCSI devices can return short writes on Write Same just like for normal writes, so we need to handle this case for our special payload requests as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split opWen Xiong1-2/+2
When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10blk-stat: don't use this_cpu_ptr() in a preemptable sectionJens Axboe1-7/+10
If PREEMPT_RCU is enabled, rcu_read_lock() isn't strong enough for us to use this_cpu_ptr() in that section. Use the safer get/put_cpu_ptr() variants instead. Reported-by: Mike Galbraith <efault@gmx.de> Fixes: 34dbad5d26e2 ("blk-stat: convert to callback-based statistics reporting") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10elevator: remove redundant warnings on IO scheduler switchJens Axboe1-4/+1
We warn twice for switching to a scheduler, if that switch fails. As we also report the failure in the return value to the sysfs write, remove the dmesg induced failures. Keep the failure print for warning to switch to the kconfig selected IO scheduler, as we can't report errors for that in any other way. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10block, bfq: stress that low_latency must be off to get max throughputPaolo Valente1-0/+5
The introduction of the BFQ and Kyber I/O schedulers has triggered a new wave of I/O benchmarks. Unfortunately, comments and discussions on these benchmarks confirm that there is still little awareness that it is very hard to achieve, at the same time, a low latency and a high throughput. In particular, virtually all benchmarks measure throughput, or throughput-related figures of merit, but, for BFQ, they use the scheduler in its default configuration. This configuration is geared, instead, toward a low latency. This is evidently a sign that BFQ documentation is still too unclear on this important aspect. This commit addresses this issue by stressing how BFQ configuration must be (easily) changed if the only goal is maximum throughput. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10block, bfq: use pointer entity->sched_data only if setPaolo Valente1-2/+11
In the function __bfq_deactivate_entity, the pointer entity->sched_data could happen to be used before being properly initialized. This led to a NULL pointer dereference. This commit fixes this bug by just using this pointer only where it is safe to do so. Reported-by: Tom Harrison <l12436.tw@gmail.com> Tested-by: Tom Harrison <l12436.tw@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-08block, dax: move "select DAX" from BLOCK to FS_DAXDan Williams1-1/+0
For configurations that do not enable DAX filesystems or drivers, do not require the DAX core to be built. Given that the 'direct_access' method has been removed from 'block_device_operations', we can also go ahead and remove the block-related dax helper functions from fs/block_dev.c to drivers/dax/super.c. This keeps dax details out of the block layer and lets the DAX core be built as a module in the FS_DAX=n case. Filesystems need to include dax.h to call bdev_dax_supported(). Cc: linux-xfs@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-08blk-mq: make __blk_mq_stop_hw_queues staticColin Ian King1-1/+1
Making __blk_mq_stop_hw_queues static fixes sparse warning: block/blk-mq.c:6: warning: symbol '__blk_mq_stop_hw_queues' was not declared. Should it be static? Fixes: 2719aa217e0d0 ("blk-mq: don't use sync workqueue flushing from drivers") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-07block/mq: fix potential deadlock during cpu hotplugWanpeng Li1-2/+2
This can be triggered by hot-unplug one cpu. ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0+ #17 Not tainted ------------------------------------------------------- step_after_susp/2640 is trying to acquire lock: (all_q_mutex){+.+...}, at: [<ffffffffb33f95b8>] blk_mq_queue_reinit_work+0x18/0x110 but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 get_online_cpus+0x64/0x80 blk_mq_init_allocated_queue+0x3a0/0x4e0 blk_mq_init_queue+0x3a/0x60 loop_add+0xe5/0x280 loop_init+0x124/0x177 do_one_initcall+0x53/0x1c0 kernel_init_freeable+0x1e3/0x27f kernel_init+0xe/0x100 ret_from_fork+0x31/0x40 -> #0 (all_q_mutex){+.+...}: __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 do_syscall_64+0x8f/0x710 return_from_SYSCALL_64+0x0/0x7a other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(all_q_mutex); lock(cpu_hotplug.lock); lock(all_q_mutex); *** DEADLOCK *** 8 locks held by step_after_susp/2640: #0: (sb_writers#6){.+.+.+}, at: [<ffffffffb3244aed>] vfs_write+0x1ad/0x1d0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffb32d3a51>] kernfs_fop_write+0x101/0x1c0 #2: (s_active#166){.+.+.+}, at: [<ffffffffb32d3a59>] kernfs_fop_write+0x109/0x1c0 #3: (pm_mutex){+.+...}, at: [<ffffffffb30d2ecd>] pm_suspend+0x21d/0x490 #4: (acpi_scan_lock){+.+.+.}, at: [<ffffffffb34dc3d7>] acpi_scan_lock_acquire+0x17/0x20 #5: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffffb306d6d7>] freeze_secondary_cpus+0x27/0x390 #6: (cpu_hotplug.dep_map){++++++}, at: [<ffffffffb306cfd5>] cpu_hotplug_begin+0x5/0xe0 #7: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 stack backtrace: CPU: 3 PID: 2640 Comm: step_after_susp Not tainted 4.11.0+ #17 Hardware name: Dell Inc. OptiPlex 7040/0JCTF8, BIOS 1.4.9 09/12/2016 Call Trace: dump_stack+0x99/0xce print_circular_bug+0x1fa/0x270 __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 ? lock_acquire+0x11c/0x230 ? blk_mq_queue_reinit_work+0x18/0x110 ? blk_mq_queue_reinit_work+0x18/0x110 __mutex_lock+0x92/0x990 ? blk_mq_queue_reinit_work+0x18/0x110 ? kmem_cache_free+0x2cb/0x330 ? anon_transport_class_unregister+0x20/0x20 ? blk_mq_queue_reinit_work+0x110/0x110 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 ? __flow_cache_shrink+0x160/0x160 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 ? rcu_read_lock_sched_held+0x79/0x80 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0xd9/0x1c0 ? vfs_write+0x1ad/0x1d0 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 ? rcu_read_lock_sched_held+0x79/0x80 do_syscall_64+0x8f/0x710 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 The cpu hotplug path will hold cpu_hotplug.lock and then reinit all exiting queues for blk mq w/ all_q_mutex, however, blk_mq_init_allocated_queue() will contend these two locks in the inversion order. This is due to commit eabe06595d62 (blk/mq: Cure cpu hotplug lock inversion), it fixes a cpu hotplug lock inversion issue because of hotplug rework, however the hotplug rework is still work-in-progress and lives in a -tip branch and mainline cannot yet trigger that splat. The commit breaks the linus's tree in the merge window, so this patch reverts the lock order and avoids to splat linus's tree. Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds11-573/+781
Pull block fixes and updates from Jens Axboe: "Some fixes and followup features/changes that should go in, in this merge window. This contains: - Two fixes for lightnvm from Javier, fixing problems in the new code merge previously in this merge window. - A fix from Jan for the backing device changes, fixing an issue in NFS that causes a failure to mount on certain setups. - A change from Christoph, cleaning up the blk-mq init and exit request paths. - Remove elevator_change(), which is now unused. From Bart. - A fix for queue operation invocation on a dead queue, from Bart. - A series fixing up mtip32xx for blk-mq scheduling, removing a bandaid we previously had in place for this. From me. - A regression fix for this series, fixing a case where we wait on workqueue flushing from an invalid (non-blocking) context. From me. - A fix/optimization from Ming, ensuring that we don't both quiesce and freeze a queue at the same time. - A fix from Peter on lock ordering for CPU hotplug. Not a real problem right now, but will be once the CPU hotplug rework goes in. - A series from Omar, cleaning up out blk-mq debugfs support, and adding support for exporting info from schedulers in debugfs as well. This is really useful in debugging stalls or livelocks. From Omar" * 'for-linus' of git://git.kernel.dk/linux-block: (28 commits) mq-deadline: add debugfs attributes kyber: add debugfs attributes blk-mq-debugfs: allow schedulers to register debugfs attributes blk-mq: untangle debugfs and sysfs blk-mq: move debugfs declarations to a separate header file blk-mq: Do not invoke queue operations on a dead queue blk-mq-debugfs: get rid of a bunch of boilerplate blk-mq-debugfs: rename hw queue directories from <n> to hctx<n> blk-mq-debugfs: don't open code strstrip() blk-mq-debugfs: error on long write to queue "state" file blk-mq-debugfs: clean up flag definitions blk-mq-debugfs: separate flags with | nfs: Fix bdi handling for cloned superblocks block/mq: Cure cpu hotplug lock inversion lightnvm: fix bad back free on error path lightnvm: create cmd before allocating request blk-mq: don't use sync workqueue flushing from drivers mtip32xx: convert internal commands to regular block infrastructure mtip32xx: cleanup internal tag assumptions block: don't call blk_mq_quiesce_queue() after queue is frozen ...
2017-05-05Merge tag 'libnvdimm-for-4.12' of ↵Linus Torvalds2-15/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has been in multiple -next releases. There were a few late breaking fixes and small features that got added in the last couple days, but the whole set has received a build success notification from the kbuild robot. Change summary: - Region media error reporting: A libnvdimm region device is the parent to one or more namespaces. To date, media errors have been reported via the "badblocks" attribute attached to pmem block devices for namespaces in "raw" or "memory" mode. Given that namespaces can be in "device-dax" or "btt-sector" mode this new interface reports media errors generically, i.e. independent of namespace modes or state. This subsequently allows userspace tooling to craft "ACPI 6.1 Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and submit them via the ioctl path for NVDIMM root bus devices. - Introduce 'struct dax_device' and 'struct dax_operations': Prompted by a request from Linus and feedback from Christoph this allows for dax capable drivers to publish their own custom dax operations. This fixes the broken assumption that all dax operations are related to a persistent memory device, and makes it easier for other architectures and platforms to add customized persistent memory support. - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is available for storage appliance applications to manually trigger memory controllers to drain write-pending buffers that would otherwise be flushed automatically by the platform ADR (asynchronous-DRAM-refresh) mechanism at a power loss event. Support for "locked" DIMMs is included to prevent namespaces from surfacing when the namespace label data area is locked. Finally, fixes for various reported deadlocks and crashes, also tagged for -stable. - ACPI / nfit driver updates: General updates of the nfit driver to add DSM command overrides, ACPI 6.1 health state flags support, DSM payload debug available by default, and various fixes. Acknowledgements that came after the branch was pushed: - commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock": Tested-by: Yi Zhang <yizhan@redhat.com> - commit 23f498448362 "libnvdimm: rework region badblocks clearing" Tested-by: Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits) libnvdimm, pfn: fix 'npfns' vs section alignment libnvdimm: handle locked label storage areas libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED brd: fix uninitialized use of brd->dax_dev block, dax: use correct format string in bdev_dax_supported device-dax: fix sysfs attribute deadlock libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking" libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering libnvdimm: rework region badblocks clearing acpi, nfit: kill ACPI_NFIT_DEBUG libnvdimm: fix clear length of nvdimm_forget_poison() libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify libnvdimm, region: sysfs trigger for nvdimm_flush() libnvdimm: fix phys_addr for nvdimm_clear_poison x86, dax, pmem: remove indirection around memcpy_from_pmem() block: remove block_device_operations ->direct_access() block, dax: convert bdev_dax_supported() to dax_direct_access() filesystem-dax: convert to dax_direct_access() Revert "block: use DAX for partition table reads" ext2, ext4, xfs: retrieve dax_device for iomap operations ...
2017-05-04mq-deadline: add debugfs attributesOmar Sandoval3-2/+131
Expose the fifo lists, cached next requests, batching state, and dispatch list. It'd also be possible to add the sorted lists, but there aren't already seq_file helpers for rbtrees. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04kyber: add debugfs attributesOmar Sandoval3-1/+134
Expose the domain token pools, asynchronous sbitmap depth, domain request lists, and batching state. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: allow schedulers to register debugfs attributesOmar Sandoval3-17/+118
This provides the infrastructure for schedulers to expose their internal state through debugfs. We add a list of queue attributes and a list of hctx attributes to struct elevator_type and wire them up when switching schedulers. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Add missing seq_file.h header in blk-mq-debugfs.h Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq: untangle debugfs and sysfsOmar Sandoval6-70/+90
Originally, I tied debugfs registration/unregistration together with sysfs. There's no reason to do this, and it's getting in the way of letting schedulers define their own debugfs attributes. Instead, tie the debugfs registration to the lifetime of the structures themselves. The saner lifetimes mean we can also get rid of the extra mq directory and move everything one level up. I.e., nvme0n1/mq/hctx0/tags is now just nvme0n1/hctx0/tags. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq: move debugfs declarations to a separate header fileOmar Sandoval6-28/+33
Preparation for adding more declarations. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq: Do not invoke queue operations on a dead queueBart Van Assche1-0/+8
In commit e869b5462f83 ("blk-mq: Unregister debugfs attributes earlier"), we shuffled the debugfs cleanup around so that the "state" attribute was removed before we freed the blk-mq data structures. However, later changes are going to undo that, so we need to explicitly disallow running a dead queue. [Omar: rebased and updated commit message] Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: get rid of a bunch of boilerplateOmar Sandoval1-328/+136
A large part of blk-mq-debugfs.c is file_operations and seq_file boilerplate. This sucks as is but will suck even more when schedulers can define their own debugfs entries. Factor it all out into a single blk_mq_debugfs_fops which multiplexes as needed. We store the request_queue, blk_mq_hw_ctx, or blk_mq_ctx in the parent directory dentry, which is kind of hacky, but it works. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: rename hw queue directories from <n> to hctx<n>Omar Sandoval1-1/+1
It's not clear what these numbered directories represent unless you consult the code. We're about to get rid of the intermediate "mq" directory, so these would be even more confusing without that context. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: don't open code strstrip()Omar Sandoval1-5/+4
Slightly more readable, plus we also strip leading spaces. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: error on long write to queue "state" fileOmar Sandoval1-7/+12
blk_queue_flags_store() currently truncates and returns a short write if the operation being written is too long. This can give us weird results, like here: $ echo "run bar" echo: write error: invalid argument $ dmesg [ 1103.075435] blk_queue_flags_store: unsupported operation bar. Use either 'run' or 'start' Instead, return an error if the user does this. While we're here, make the argument names consistent with everywhere else in this file. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: clean up flag definitionsOmar Sandoval1-93/+108
Make sure the spelled out flag names match the definition. This also adds a missing hctx state, BLK_MQ_S_START_ON_RUN, and a missing cmd_flag, __REQ_NOUNMAP. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq-debugfs: separate flags with |Omar Sandoval1-1/+1
This reads more naturally than spaces. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04block/mq: Cure cpu hotplug lock inversionPeter Zijlstra1-2/+2
By poking at /debug/sched_features I triggered the following splat: [] ====================================================== [] WARNING: possible circular locking dependency detected [] 4.11.0-00873-g964c8b7-dirty #694 Not tainted [] ------------------------------------------------------ [] bash/2109 is trying to acquire lock: [] (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50 [] [] but task is already holding lock: [] (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] which lock already depends on the new lock. [] [] [] the existing dependency chain (in reverse order) is: [] [] -> #2 (&sb->s_type->i_mutex_key#4){+++++.}: [] lock_acquire+0x100/0x210 [] down_write+0x28/0x60 [] start_creating+0x5e/0xf0 [] debugfs_create_dir+0x13/0x110 [] blk_mq_debugfs_register+0x21/0x70 [] blk_mq_register_dev+0x64/0xd0 [] blk_register_queue+0x6a/0x170 [] device_add_disk+0x22d/0x440 [] loop_add+0x1f3/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] [] -> #1 (all_q_mutex){+.+.+.}: [] lock_acquire+0x100/0x210 [] __mutex_lock+0x6c/0x960 [] mutex_lock_nested+0x1b/0x20 [] blk_mq_init_allocated_queue+0x37c/0x4e0 [] blk_mq_init_queue+0x3a/0x60 [] loop_add+0xe5/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] *** DEADLOCK *** [] [] 3 locks held by bash/2109: [] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0 [] #1: (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0 [] #2: (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] stack backtrace: [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty #694 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [] Call Trace: [] lock_acquire+0x100/0x210 [] get_online_cpus+0x2a/0x90 [] static_key_slow_dec+0x1b/0x50 [] static_key_disable+0x20/0x30 [] sched_feat_write+0x131/0x170 [] full_proxy_write+0x97/0xd0 [] __vfs_write+0x28/0x120 [] vfs_write+0xb5/0x1a0 [] SyS_write+0x49/0xa0 [] entry_SYSCALL_64_fastpath+0x23/0xc2 This is because of the cpu hotplug lock rework. Break the chain at #1 by reversing the lock acquisition order. This way i_mutex_key#4 no longer depends on cpu_hotplug_lock and things are good. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-03blk-mq: don't use sync workqueue flushing from driversJens Axboe1-5/+20
A previous commit introduced the sync flush, which we need from internal callers like blk_mq_quiesce_queue(). However, we also call the stop helpers from drivers, particularly from ->queue_rq() when we have to stop processing for a bit. We can't block from those locations, and we don't have to guarantee that we're fully flushed. Fixes: 9f993737906b ("blk-mq: unify hctx delayed_run_work and run_work") Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-03Merge branch 'for-linus' of ↵Linus Torvalds1-48/+13
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD updates from Shaohua Li: - Add Partial Parity Log (ppl) feature found in Intel IMSM raid array by Artur Paszkiewicz. This feature is another way to close RAID5 writehole. The Linux implementation is also available for normal RAID5 array if specific superblock bit is set. - A number of md-cluser fixes and enabling md-cluster array resize from Guoqing Jiang - A bunch of patches from Ming Lei and Neil Brown to rewrite MD bio handling related code. Now MD doesn't directly access bio bvec, bi_phys_segments and uses modern bio API for bio split. - Improve RAID5 IO pattern to improve performance for hard disk based RAID5/6 from me. - Several patches from Song Liu to speed up raid5-cache recovery and allow raid5 cache feature disabling in runtime. - Fix a performance regression in raid1 resync from Xiao Ni. - Other cleanup and fixes from various people. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (84 commits) md/raid10: skip spare disk as 'first' disk md/raid1: Use a new variable to count flighting sync requests md: clear WantReplacement once disk is removed md/raid1/10: remove unused queue md: handle read-only member devices better. md/raid10: wait up frozen array in handle_write_completed uapi: fix linux/raid/md_p.h userspace compilation error md-cluster: Fix a memleak in an error handling path md: support disabling of create-on-open semantics. md: allow creation of mdNNN arrays via md_mod/parameters/new_array raid5-ppl: use a single mempool for ppl_io_unit and header_page md/raid0: fix up bio splitting. md/linear: improve bio splitting. md/raid5: make chunk_aligned_read() split bios more cleanly. md/raid10: simplify handle_read_error() md/raid10: simplify the splitting of requests. md/raid1: factor out flush_bio_list() md/raid1: simplify handle_read_error(). Revert "block: introduce bio_copy_data_partial" md/raid1: simplify alloc_behind_master_bio() ...
2017-05-02block: don't call blk_mq_quiesce_queue() after queue is frozenMing Lei2-5/+0
After queue is frozen, no request in this queue can be in use at all, so there can't be any .queue_rq() running on this queue. It isn't necessary to call blk_mq_quiesce_queue() any more, so remove it in both elevator_switch_mq() and blk_mq_update_nr_requests(). Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Fixed up the description a bit. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02Merge tag 'docs-4.12' of git://git.lwn.net/linuxLinus Torvalds1-3/+4
Pull documentation update from Jonathan Corbet: "A reasonably busy cycle for documentation this time around. There is a new guide for user-space API documents, rather sparsely populated at the moment, but it's a start. Markus improved the infrastructure for converting diagrams. Mauro has converted much of the USB documentation over to RST. Plus the usual set of fixes, improvements, and tweaks. There's a bit more than the usual amount of reaching out of Documentation/ to fix comments elsewhere in the tree; I have acks for those where I could get them" * tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits) docs: Fix a couple typos docs: Fix a spelling error in vfio-mediated-device.txt docs: Fix a spelling error in ioctl-number.txt MAINTAINERS: update file entry for HSI subsystem Documentation: allow installing man pages to a user defined directory Doc/PM: Sync with intel_powerclamp code behavior zr364xx.rst: usb/devices is now at /sys/kernel/debug/ usb.rst: move documentation from proc_usb_info.txt to USB ReST book convert philips.txt to ReST and add to media docs docs-rst: usb: update old usbfs-related documentation arm: Documentation: update a path name docs: process/4.Coding.rst: Fix a couple of document refs docs-rst: fix usb cross-references usb: gadget.h: be consistent at kernel doc macros usb: composite.h: fix two warnings when building docs usb: get rid of some ReST doc build errors usb.rst: get rid of some Sphinx errors usb/URB.txt: convert to ReST and update it usb/persist.txt: convert to ReST and add to driver-api book usb/hotplug.txt: convert to ReST and add to driver-api book ...
2017-05-02blk-mq: update ->init_request and ->exit_request prototypesChristoph Hellwig1-13/+5
Remove the request_idx parameter, which can't be used safely now that we support I/O schedulers with blk-mq. Except for a superflous check in mtip32xx it was unused anyway. Also pass the tag_set instead of just the driver data - this allows drivers to avoid some code duplication in a follow on cleanup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02blk-mq-sched: remove hack that bypasses scheduler for reserved requestsJens Axboe1-5/+1
We have update the troublesome driver (mtip32xx) to deal with this appropriately. So kill the hack that bypassed scheduler allocation and insertion for reserved requests. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02block: Remove elevator_change()Bart Van Assche1-13/+0
Since commit 84253394927c ("remove the mg_disk driver") removed the only caller of elevator_change(), also remove the elevator_change() function itself. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-01Merge branch 'work.uaccess' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess unification updates from Al Viro: "This is the uaccess unification pile. It's _not_ the end of uaccess work, but the next batch of that will go into the next cycle. This one mostly takes copy_from_user() and friends out of arch/* and gets the zero-padding behaviour in sync for all architectures. Dealing with the nocache/writethrough mess is for the next cycle; fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am sold on access_ok() in there, BTW; just not in this pile), same for reducing __copy_... callsites, strn*... stuff, etc. - there will be a pile about as large as this one in the next merge window. This one sat in -next for weeks. -3KLoC" * 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits) HAVE_ARCH_HARDENED_USERCOPY is unconditional now CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now m32r: switch to RAW_COPY_USER hexagon: switch to RAW_COPY_USER microblaze: switch to RAW_COPY_USER get rid of padding, switch to RAW_COPY_USER ia64: get rid of copy_in_user() ia64: sanitize __access_ok() ia64: get rid of 'segment' argument of __do_{get,put}_user() ia64: get rid of 'segment' argument of __{get,put}_user_check() ia64: add extable.h powerpc: get rid of zeroing, switch to RAW_COPY_USER esas2r: don't open-code memdup_user() alpha: fix stack smashing in old_adjtimex(2) don't open-code kernel_setsockopt() mips: switch to RAW_COPY_USER mips: get rid of tail-zeroing in primitives mips: make copy_from_user() zero tail explicitly mips: clean and reorder the forest of macros... mips: consolidate __invoke_... wrappers ...
2017-05-01Merge branch 'md-next' into md-linusShaohua Li1-48/+13
2017-05-01Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-blockLinus Torvalds45-1171/+11837
Pull block layer updates from Jens Axboe: - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ was initially a fork of CFQ, but subsequently changed to implement fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant to be used on desktop type single drives, providing good fairness. From Paolo. - Add Kyber IO scheduler. This is a full multiqueue aware scheduler, using a scalable token based algorithm that throttles IO based on live completion IO stats, similary to blk-wbt. From Omar. - A series from Jan, moving users to separately allocated backing devices. This continues the work of separating backing device life times, solving various problems with hot removal. - A series of updates for lightnvm, mostly from Javier. Includes a 'pblk' target that exposes an open channel SSD as a physical block device. - A series of fixes and improvements for nbd from Josef. - A series from Omar, removing queue sharing between devices on mostly legacy drivers. This helps us clean up other bits, if we know that a queue only has a single device backing. This has been overdue for more than a decade. - Fixes for the blk-stats, and improvements to unify the stats and user windows. This both improves blk-wbt, and enables other users to register a need to receive IO stats for a device. From Omar. - blk-throttle improvements from Shaohua. This provides a scalable framework for implementing scalable priotization - particularly for blk-mq, but applicable to any type of block device. The interface is marked experimental for now. - Bucketized IO stats for IO polling from Stephen Bates. This improves efficiency of polled workloads in the presence of mixed block size IO. - A few fixes for opal, from Scott. - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics. From a variety of folks, mostly Sagi and James Smart. - A series from Bart, improving our exposed info and capabilities from the blk-mq debugfs support. - A series from Christoph, cleaning up how handle WRITE_ZEROES. - A series from Christoph, cleaning up the block layer handling of how we track errors in a request. On top of being a nice cleanup, it also shrinks the size of struct request a bit. - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was never used by platforms, and the latter has outlived it's usefulness. - Various little bug fixes and cleanups from a wide variety of folks. * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits) block: hide badblocks attribute by default blk-mq: unify hctx delay_work and run_work block: add kblock_mod_delayed_work_on() blk-mq: unify hctx delayed_run_work and run_work nbd: fix use after free on module unload MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler blk-mq-sched: alloate reserved tags out of normal pool mtip32xx: use runtime tag to initialize command header scsi: Implement blk_mq_ops.show_rq() blk-mq: Add blk_mq_ops.show_rq() blk-mq: Show operation, cmd_flags and rq_flags names blk-mq: Make blk_flags_show() callers append a newline character blk-mq: Move the "state" debugfs attribute one level down blk-mq: Unregister debugfs attributes earlier blk-mq: Only unregister hctxs for which registration succeeded blk-mq-debugfs: Rename functions for registering and unregistering the mq directory blk-mq: Let blk_mq_debugfs_register() look up the queue name blk-mq: Register <dev>/queue/mq after having registered <dev>/queue ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset ide-pm: always pass 0 error to __blk_end_request_all ..
2017-04-28block: hide badblocks attribute by defaultDan Williams1-0/+11
Commit 99e6608c9e74 "block: Add badblock management for gendisks" allowed for drivers like pmem and software-raid to advertise a list of bad media areas. However, it inadvertently added a 'badblocks' to all block devices. Lets clean this up by having the 'badblocks' attribute not be visible when the driver has not populated a 'struct badblocks' instance in the gendisk. Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28blk-mq: unify hctx delay_work and run_workJens Axboe2-15/+23
The only difference between ->run_work and ->delay_work, is that the latter is used to defer running a queue. This is done by marking the queue stopped, and scheduling ->delay_work to run sometime in the future. While the queue is stopped, direct runs or runs through ->run_work will not run the queue. If we combine the handlers, then we need to handle two things: 1) If a delayed/stopped run is scheduled, then we should not run the queue before that has been completed. 2) If a queue is delayed/stopped, the handler needs to restart the queue. Normally a run of a queue with the stopped bit set would be a no-op. Case 1 is handled by modifying a currently pending queue run to the deadline set by the caller of blk_mq_delay_queue(). Subsequent attempts to queue a queue run will find the work item already pending, and direct runs will see a stopped queue as before. Case 2 is handled by adding a new bit, BLK_MQ_S_START_ON_RUN, that tells the work handler that it should clear a stopped queue and run the handler. Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28block: add kblock_mod_delayed_work_on()Jens Axboe1-0/+7
This modifies (or adds, if not currently pending) an existing delayed work item. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28blk-mq: unify hctx delayed_run_work and run_workJens Axboe2-22/+7
They serve the exact same purpose. Get rid of the non-delayed work variant, and just run it without delay for the normal case. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27blk-mq-sched: alloate reserved tags out of normal poolJens Axboe1-1/+5
At least one driver, mtip32xx, has a hard coded dependency on the value of the reserved tag used for internal commands. While that should really be fixed up, for now let's ensure that we just bypass the scheduler tags an allocation marked as reserved. They are used for house keeping or error handling, so we can safely ignore them in the scheduler. Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26blk-mq: Add blk_mq_ops.show_rq()Bart Van Assche1-1/+5
This new callback function will be used in the next patch to show more information about SCSI requests. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>