summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2022-01-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-15/+7
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, pm80xx, lpfc, mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes. The most impactful change is likely the switch from GFP_DMA to GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too many people" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits) scsi: mpi3mr: Bump driver version to 8.0.0.61.0 scsi: mpi3mr: Fixes around reply request queues scsi: mpi3mr: Enhanced Task Management Support Reply handling scsi: mpi3mr: Use TM response codes from MPI3 headers scsi: mpi3mr: Add io_uring interface support in I/O-polled mode scsi: mpi3mr: Print cable mngnt and temp threshold events scsi: mpi3mr: Support Prepare for Reset event scsi: mpi3mr: Add Event acknowledgment logic scsi: mpi3mr: Gracefully handle online FW update operation scsi: mpi3mr: Detect async reset that occurred in firmware scsi: mpi3mr: Add IOC reinit function scsi: mpi3mr: Handle offline FW activation in graceful manner scsi: mpi3mr: Code refactor of IOC init - part2 scsi: mpi3mr: Code refactor of IOC init - part1 scsi: mpi3mr: Fault IOC when internal command gets timeout scsi: mpi3mr: Display IOC firmware package version scsi: mpi3mr: Handle unaligned PLL in unmap cmnds scsi: mpi3mr: Increase internal cmnds timeout to 60s scsi: mpi3mr: Do access status validation before adding devices scsi: mpi3mr: Add support for PCIe Managed Switch SES device ...
2022-01-12Merge tag 'iomap-5.17' of git://git.infradead.org/users/willy/linuxLinus Torvalds1-0/+22
Pull iomap updates from Matthew Wilcox: "Convert xfs/iomap to use folios. This should be all that is needed for XFS to use large folios. There is no code in this pull request to create large folios, but no additional changes should be needed to XFS or iomap once they are created. Usually this would have come from Darrick, and we had intended that it would come that route. Between the holidays and various things which Darrick needed to work on, he asked if I could send things directly. There weren't any other iomap patches pending for this release, which probably also played a role" * tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux: (26 commits) iomap: Inline __iomap_zero_iter into its caller xfs: Support large folios iomap: Support large folios in invalidatepage iomap: Convert iomap_migrate_page() to use folios iomap: Convert iomap_add_to_ioend() to take a folio iomap: Simplify iomap_do_writepage() iomap: Simplify iomap_writepage_map() iomap,xfs: Convert ->discard_page to ->discard_folio iomap: Convert iomap_write_end_inline to take a folio iomap: Convert iomap_write_begin() and iomap_write_end() to folios iomap: Convert __iomap_zero_iter to use a folio iomap: Allow iomap_write_begin() to be called with the full length iomap: Convert iomap_page_mkwrite to use a folio iomap: Convert readahead and readpage to use a folio iomap: Convert iomap_read_inline_data to take a folio iomap: Use folio offsets instead of page offsets iomap: Convert bio completions to use folios iomap: Pass the iomap_page into iomap_set_range_uptodate iomap: Add iomap_invalidate_folio iomap: Convert iomap_releasepage to use a folio ...
2022-01-12Merge tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-blockLinus Torvalds37-1349/+1385
Pull block updates from Jens Axboe: - Unify where the struct request handling code is located in the blk-mq code (Christoph) - Header cleanups (Christoph) - Clean up the io_context handling code (Christoph, me) - Get rid of ->rq_disk in struct request (Christoph) - Error handling fix for add_disk() (Christoph) - request allocation cleanusp (Christoph) - Documentation updates (Eric, Matthew) - Remove trivial crypto unregister helper (Eric) - Reduce shared tag overhead (John) - Reduce poll_stats memory overhead (me) - Known indirect function call for dio (me) - Use atomic references for struct request (me) - Support request list issue for block and NVMe (me) - Improve queue dispatch pinning (Ming) - Improve the direct list issue code (Keith) - BFQ improvements (Jan) - Direct completion helper and use it in mmc block (Sebastian) - Use raw spinlock for the blktrace code (Wander) - fsync error handling fix (Ye) - Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me) * tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits) MAINTAINERS: add entries for block layer documentation docs: block: remove queue-sysfs.rst docs: sysfs-block: document virt_boundary_mask docs: sysfs-block: document stable_writes docs: sysfs-block: fill in missing documentation from queue-sysfs.rst docs: sysfs-block: add contact for nomerges docs: sysfs-block: sort alphabetically docs: sysfs-block: move to stable directory block: don't protect submit_bio_checks by q_usage_counter block: fix old-style declaration nvme-pci: fix queue_rqs list splitting block: introduce rq_list_move block: introduce rq_list_for_each_safe macro block: move rq_list macros to blk-mq.h block: drop needless assignment in set_task_ioprio() block: remove unnecessary trailing '\' bio.h: fix kernel-doc warnings block: check minor range in device_add_disk() block: use "unsigned long" for blk_validate_block_size(). block: fix error unwinding in device_add_disk ...
2022-01-09block: don't protect submit_bio_checks by q_usage_counterMing Lei2-31/+22
Commit cc9c884dd7f4 ("block: call submit_bio_checks under q_usage_counter") uses q_usage_counter to protect submit_bio_checks for avoiding IO after disk is deleted by del_gendisk(). Turns out the protection isn't necessary, because once blk_mq_freeze_queue_wait() in del_gendisk() returns: 1) all in-flight IO has been done 2) all new IO will be failed in __bio_queue_enter() because q_usage_counter is dead, and GD_DEAD is set 3) both disk and request queue instance are safe since caller of submit_bio() guarantees that the disk can't be closed. Once submit_bio_checks() needn't the protection of q_usage_counter, we can move submit_bio_checks before calling blk_mq_submit_bio() and ->submit_bio(). With this change, we needn't to throttle queue with holding one allocated request, then precise driver tag or request won't be wasted in throttling. Meantime we can unify the bio check for both bio based and request based driver. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220104134223.590803-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-23block: drop needless assignment in set_task_ioprio()Lukas Bulwahn1-4/+2
Commit 5fc11eebb4a9 ("block: open code create_task_io_context in set_task_ioprio") introduces a needless assignment 'ioc = task->io_context', as the local variable ioc is not further used before returning. Even after the further fix, commit a957b61254a7 ("block: fix error in handling dead task for ioprio setting"), the assignment still remains needless. Drop this needless assignment in set_task_ioprio(). This code smell was identified with 'make clang-analyzer'. Fixes: 5fc11eebb4a9 ("block: open code create_task_io_context in set_task_ioprio") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211223125300.20691-1-lukas.bulwahn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-22scsi: block: pm: Always set request queue runtime active in ↵Alan Stern1-15/+7
blk_post_runtime_resume() John Garry reported a deadlock that occurs when trying to access a runtime-suspended SATA device. For obscure reasons, the rescan procedure causes the link to be hard-reset, which disconnects the device. The rescan tries to carry out a runtime resume when accessing the device. scsi_rescan_device() holds the SCSI device lock and won't release it until it can put commands onto the device's block queue. This can't happen until the queue is successfully runtime-resumed or the device is unregistered. But the runtime resume fails because the device is disconnected, and __scsi_remove_device() can't do the unregistration because it can't get the device lock. The best way to resolve this deadlock appears to be to allow the block queue to start running again even after an unsuccessful runtime resume. The idea is that the driver or the SCSI error handler will need to be able to use the queue to resolve the runtime resume failure. This patch removes the err argument to blk_post_runtime_resume() and makes the routine act as though the resume was successful always. This fixes the deadlock. Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com Fixes: e27829dc92e5 ("scsi: serialize ->rescan against ->remove") Reported-and-tested-by: John Garry <john.garry@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-21block: check minor range in device_add_disk()Tetsuo Handa1-0/+2
ioctl(fd, LOOP_CTL_ADD, 1048576) causes sysfs: cannot create duplicate filename '/dev/block/7:0' message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0) due to MINORMASK == 1048575. Verify that all minor numbers for that device fit in the minor range. Reported-by: wangyangbo <wangyangbo@uniontech.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-21block: fix error unwinding in device_add_diskChristoph Hellwig1-7/+6
One device_add is called disk->ev will be freed by disk_release, so we should free it twice. Fix this by allocating disk->ev after device_add so that the extra local unwinding can be removed entirely. Based on an earlier patch from Tetsuo Handa. Reported-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com> Fixes: 83cbce9574462c6b ("block: add error handling for device_add_disk / add_disk") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211221161851.788424-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-20block: call blk_exit_queue() before freeing q->statsMing Lei1-2/+2
blk_stat_disable_accounting() is added in commit 68497092bde9 ("block: make queue stat accounting a reference"), and called in kyber_exit_sched(). So we have to free q->stats after elevator is unloaded from blk_exit_queue() in blk_release_queue(). Otherwise kernel panic is caused. Fixes: 68497092bde9 ("block: make queue stat accounting a reference") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211221040436.1333880-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-20block: fix error in handling dead task for ioprio settingJens Axboe1-2/+8
Don't combine the task exiting and "already have io_context" case, we need to just abort if the task is marked as dead. Return -ESRCH, which is the documented value for ioprio_set() if the specified task could not be found. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: syzbot+8836466a79f4175961b0@syzkaller.appspotmail.com Fixes: 5fc11eebb4a9 ("block: open code create_task_io_context in set_task_ioprio") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-20blk-mq: blk-mq: check quiesce state before queue_rqsKeith Busch1-1/+9
The low level drivers don't expect to see new requests after a successful quiesce completes. Check the queue quiesce state within the rcu protected area prior to calling the driver's queue_rqs(). Fixes: 3c67d44de787 ("block: add mq_ops->queue_rqs hook") Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211220205919.180191-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-19Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+0
Pull block revert from Jens Axboe: "It turns out that the fix for not hammering on the delayed work timer too much caused a performance regression for BFQ, so let's revert the change for now. I've got some ideas on how to fix it appropriately, but they should wait for 5.17" * tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block: Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
2021-12-19Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"Jens Axboe1-2/+0
This reverts commit cb2ac2912a9ca7d3d26291c511939a41361d2d83. Alex and the kernel test robot report that this causes a significant performance regression with BFQ. I can reproduce that result, so let's revert this one as we're close to -rc6 and we there's no point in trying to rush a fix. Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/ Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/ Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-17Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-blockLinus Torvalds2-1/+10
Pull block fixes from Jens Axboe: - Fix for hammering on the delayed run queue timer (me) - bcache regression fix for this merge window (Lin) - Fix a divide-by-zero in the blk-iocost code (Tejun) * tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block: bcache: fix NULL pointer reference in cached_dev_detach_finish block: reduce kblockd_mod_delayed_work_on() CPU consumption iocost: Fix divide-by-zero on donation from low hweight cgroup
2021-12-16block: Add bio_add_folio()Matthew Wilcox (Oracle)1-0/+22
This is a thin wrapper around bio_add_page(). The main advantage here is the documentation that folios larger than 2GiB are not supported. It's not currently possible to allocate folios that large, but if it ever becomes possible, this function will fail gracefully instead of doing I/O to the wrong bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-12-16block: only build the icq tracking code when neededChristoph Hellwig4-27/+51
Only bfq needs to code to track icq, so make it conditional. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: fold create_task_io_context into ioc_find_get_icqChristoph Hellwig1-31/+12
Fold create_task_io_context into the only remaining caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: open code create_task_io_context in set_task_ioprioChristoph Hellwig1-5/+11
The flow in set_task_ioprio can be simplified by simply open coding create_task_io_context, which removes a refcount roundtrip on the I/O context. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: fold get_task_io_context into set_task_ioprioChristoph Hellwig1-38/+14
Fold get_task_io_context into its only caller, and simplify the code as no reference to the I/O context is required to just set the ioprio field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: move set_task_ioprio to blk-ioc.cChristoph Hellwig2-34/+32
Keep set_task_ioprio with the other low-level code that accesses the io_context structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: cleanup ioc_clear_queueChristoph Hellwig1-22/+11
Fold __ioc_clear_queue into ioc_clear_queue and switch to always use plain _irq locking instead of the more expensive _irqsave that is not needed here. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: refactor put_io_contextChristoph Hellwig1-19/+19
Move the code to delay freeing the icqs into a separate helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: remove the NULL ioc check in put_io_contextChristoph Hellwig1-3/+0
No caller passes in a NULL pointer, so remove the check. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: refactor put_iocontext_activeChristoph Hellwig1-27/+14
Factor out a ioc_exit_icqs helper to tear down the icqs and the fold the rest of put_iocontext_active into exit_io_context. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: simplify struct io_context refcountingChristoph Hellwig1-4/+1
Don't hold a reference to ->refcount for each active reference, but just one for all active references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: remove the nr_task field from struct io_contextChristoph Hellwig1-3/+0
Nothing ever looks at ->nr_tasks, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: add mq_ops->queue_rqs hookJens Axboe1-3/+23
If we have a list of requests in our plug list, send it to the driver in one go, if possible. The driver must set mq_ops->queue_rqs() to support this, if not the usual one-by-one path is used. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: use singly linked list for bio cacheJens Axboe1-5/+8
Pointless to maintain a head/tail for the list, as we never need to access the tail. Entries are always LIFO for cache hotness reasons. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: add completion handler for fast pathJens Axboe1-1/+42
The batched completions only deal with non-partial requests anyway, and it doesn't deal with any requests that have errors. Add a completion handler that assumes it's a full request and that it's all being ended successfully. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14block: reduce kblockd_mod_delayed_work_on() CPU consumptionJens Axboe1-0/+2
Dexuan reports that he's seeing spikes of very heavy CPU utilization when running 24 disks and using the 'none' scheduler. This happens off the sched restart path, because SCSI requires the queue to be restarted async, and hence we're hammering on mod_delayed_work_on() to ensure that the work item gets run appropriately. Avoid hammering on the timer and just use queue_work_on() if no delay has been specified. Reported-and-tested-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/linux-block/BYAPR21MB1270C598ED214C0490F47400BF719@BYAPR21MB1270.namprd21.prod.outlook.com/ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14block: make queue stat accounting a referenceJens Axboe3-5/+18
kyber turns on IO statistics when it is loaded on a queue, which means that even if kyber is then later unloaded, we're still stuck with stats enabled on the queue. Change the account enabled from a bool to an int, and pair the enable call with the equivalent disable call. This ensures that stats gets turned off again appropriately. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14iocost: Fix divide-by-zero on donation from low hweight cgroupTejun Heo1-1/+8
The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: f1de2439ec43 ("blk-iocost: revamp donation amount determination") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-13bdev: Improve lookup_bdev documentationMatthew Wilcox (Oracle)1-6/+6
Add a Context section and rewrite the rest to be clearer. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Link: https://lore.kernel.org/r/20211213171113.3097631-1-willy@infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-11Merge tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+4
Pull block fixes from Jens Axboe: "A few block fixes that should go into this release: - NVMe pull request: - set ana_log_size to 0 after freeing ana_log_buf (Hou Tao) - show subsys nqn for duplicate cntlids (Keith Busch) - disable namespace access for unsupported metadata (Keith Busch) - report write pointer for a full zone as zone start + zone len (Niklas Cassel) - fix use after free when disconnecting a reconnecting ctrl (Ruozhu Li) - fix a list corruption in nvmet-tcp (Sagi Grimberg) - Fix for a regression on DIO single bio async IO (Pavel) - ioprio seteuid fix (Davidlohr) - mtd fix that subsequently got reverted as it was broken, will get re-done and submitted for the next round - Two MD fixes via Song (Markus, zhangyue)" * tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block: Revert "mtd_blkdevs: don't scan partitions for plain mtdblock" block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2) md: fix double free of mddev->private in autorun_array() md: fix update super 1.0 on rdev size change nvmet-tcp: fix possible list corruption for unexpected command failure block: fix single bio async DIO error handling nvme: fix use after free when disconnecting a reconnecting ctrl nvme-multipath: set ana_log_size to 0 after free ana_log_buf mtd_blkdevs: don't scan partitions for plain mtdblock nvme: report write pointer for a full zone as zone start + zone len nvme: disable namespace access for unsupported metadata nvme: show subsys nqn for duplicate cntlids
2021-12-10block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)Davidlohr Bueso1-0/+3
do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent change_pid(PIDTYPE_PGID) that can move the task from one hlist to another while iterating. Serialize ioprio_get to take the tasklist_lock in this case, just like it's set counterpart. Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()) Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-08Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-0/+1
Daniel Borkmann says: ==================== bpf 2021-12-08 We've added 12 non-merge commits during the last 22 day(s) which contain a total of 29 files changed, 659 insertions(+), 80 deletions(-). The main changes are: 1) Fix an off-by-two error in packet range markings and also add a batch of new tests for coverage of these corner cases, from Maxim Mikityanskiy. 2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh. 3) Fix two functional regressions and a build warning related to BTF kfunc for modules, from Kumar Kartikeya Dwivedi. 4) Fix outdated code and docs regarding BPF's migrate_disable() use on non- PREEMPT_RT kernels, from Sebastian Andrzej Siewior. 5) Add missing includes in order to be able to detangle cgroup vs bpf header dependencies, from Jakub Kicinski. 6) Fix regression in BPF sockmap tests caused by missing detachment of progs from sockets when they are removed from the map, from John Fastabend. 7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF dispatcher, from Björn Töpel. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add selftests to cover packet access corner cases bpf: Fix the off-by-two error in range markings treewide: Add missing includes masked by cgroup -> bpf dependency tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets bpf: Fix bpf_check_mod_kfunc_call for built-in modules bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL mips, bpf: Fix reference to non-existing Kconfig symbol bpf: Make sure bpf_disable_instrumentation() is safe vs preemption. Documentation/locking/locktypes: Update migrate_disable() bits. bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap bpf, sockmap: Attach map progs to psock early for feature probes bpf, x86: Fix "no previous prototype" warning ==================== Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07block: fix single bio async DIO error handlingPavel Begunkov1-2/+1
BUG: KASAN: use-after-free in io_submit_one+0x496/0x2fe0 fs/aio.c:1882 CPU: 2 PID: 15100 Comm: syz-executor873 Not tainted 5.16.0-rc1-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: [...] refcount_dec_and_test include/linux/refcount.h:333 [inline] iocb_put fs/aio.c:1161 [inline] io_submit_one+0x496/0x2fe0 fs/aio.c:1882 __do_sys_io_submit fs/aio.c:1938 [inline] __se_sys_io_submit fs/aio.c:1908 [inline] __x64_sys_io_submit+0x1c7/0x4a0 fs/aio.c:1908 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae __blkdev_direct_IO_async() returns errors from bio_iov_iter_get_pages() directly, in which case upper layers won't be expecting ->ki_complete to be called by the block layer and will terminate the request. However, there is also bio_endio() leading to a second ->ki_complete and a double free. Fixes: 54a88eb838d37 ("block: add single bio async direct IO helper") Reported-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/c9eb786f6cef041e159e6287de131bec0719ad5c.1638907997.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06blk-mq: Optimise blk_mq_queue_tag_busy_iter() for shared tagsJohn Garry1-18/+41
Kashyap reports high CPU usage in blk_mq_queue_tag_busy_iter() and callees using megaraid SAS RAID card since moving to shared tags [0]. Previously, when shared tags was shared sbitmap, this function was less than optimum since we would iter through all tags for all hctx's, yet only ever match upto tagset depth number of rqs. Since the change to shared tags, things are even less efficient if we have parallel callers of blk_mq_queue_tag_busy_iter(). This is because in bt_iter() -> blk_mq_find_and_get_req() there would be more contention on accessing each request ref and tags->lock since they are now shared among all HW queues. Optimise by having separate calls to bt_for_each() for when we're using shared tags. In this case no longer pass a hctx, as it is no longer relevant, and teach bt_iter() about this. Ming suggested something along the lines of this change, apart from a different implementation. [0] https://lore.kernel.org/linux-block/e4e92abbe9d52bcba6b8cc6c91c442cc@mail.gmail.com/ Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reported-and-tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support") Link: https://lore.kernel.org/r/1638794990-137490-4-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06blk-mq: Delete busy_iter_fnJohn Garry2-4/+4
Typedefs busy_iter_fn and busy_tag_iter_fn are now identical, so delete busy_iter_fn to reduce duplication. It would be nicer to delete busy_tag_iter_fn, as the name busy_iter_fn is less specific. However busy_tag_iter_fn is used in many different parts of the tree, unlike busy_iter_fn which is just use in block/, so just take the straightforward path now, so that we could rename later treewide. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Link: https://lore.kernel.org/r/1638794990-137490-3-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06blk-mq: Drop busy_iter_fn blk_mq_hw_ctx argumentJohn Garry2-10/+9
The only user of blk_mq_hw_ctx blk_mq_hw_ctx argument is blk_mq_rq_inflight(). Function blk_mq_rq_inflight() uses the hctx to find the associated request queue to match against the request. However this same check is already done in caller bt_iter(), so drop this check. With that change there are no more users of busy_iter_fn blk_mq_hw_ctx argument, so drop the argument. Reviewed-by Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Link: https://lore.kernel.org/r/1638794990-137490-2-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06blk-mq: don't use plug->mq_list->q directly in blk_mq_run_dispatch_ops()Ming Lei1-1/+3
blk_mq_run_dispatch_ops() is defined as one macro, and plug->mq_list will be changed when running 'dispatch_ops', so add one local variable for holding request queue. Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com> Fixes: 4cafe86c9267 ("blk-mq: run dispatch lock once in case of issuing from list") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06blk-mq: don't run might_sleep() if the operation needn't blockingMing Lei2-3/+6
The operation protected via blk_mq_run_dispatch_ops() in blk_mq_run_hw_queue won't sleep, so don't run might_sleep() for it. Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03blk-mq: run dispatch lock once in case of issuing from listMing Lei2-9/+8
It isn't necessary to call blk_mq_run_dispatch_ops() once for issuing single request directly, and enough to do it one time when issuing from whole list. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211203131534.3668411-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03blk-mq: pass request queue to blk_mq_run_dispatch_opsMing Lei2-8/+9
We have switched to allocate srcu into request queue, so it is fine to pass request queue to blk_mq_run_dispatch_ops(). Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211203131534.3668411-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03blk-mq: move srcu from blk_mq_hw_ctx to request_queueMing Lei7-41/+44
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch critical area. However, this srcu instance stays at the end of hctx, and it often takes standalone cacheline, often cold. Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on the indirect percpu variable which is allocated from heap instead of being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It doesn't matter if srcu structure stays in hctx or request queue. So switch to per-request-queue srcu for protecting dispatch, and this way simplifies quiesce a lot, not mention quiesce is always done on the request queue wide. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03blk-mq: remove hctx_lock and hctx_unlockMing Lei2-47/+26
Remove hctx_lock and hctx_unlock, and add one helper of blk_mq_run_dispatch_ops() to run code block defined in dispatch_ops with rcu/srcu read held. Compared with hctx_lock()/hctx_unlock(): 1) remove 2 branch to 1, so we just need to check (hctx->flags & BLK_MQ_F_BLOCKING) once when running one dispatch_ops 2) srcu_idx needn't to be touched in case of non-blocking 3) might_sleep_if() can be moved to the blocking branch Also put the added blk_mq_run_dispatch_ops() in private header, so that the following patch can use it out of blk-mq.c. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211203131534.3668411-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03block: switch to atomic_t for request referencesJens Axboe4-9/+40
refcount_t is not as expensive as it used to be, but it's still more expensive than the io_uring method of using atomic_t and just checking for potential over/underflow. This borrows that same implementation, which in turn is based on the mm implementation from Linus. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03block: move direct_IO into our own read_iter handlerJens Axboe1-5/+32
Don't call into generic_file_read_iter() if we know it's O_DIRECT, just set it up ourselves and call our own handler. This avoids an indirect call for O_DIRECT. Fall back to filemap_read() if we fail. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03treewide: Add missing includes masked by cgroup -> bpf dependencyJakub Kicinski1-0/+1
cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Peter Chen <peter.chen@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org
2021-12-02block: fix double bio queue when merging in cached request pathJens Axboe1-8/+12
When we attempt to merge off the cached request path, we return NULL if successful. This makes the caller believe that it's should allocate a new request, and hence we end up with the bio both merged and associated with a new request. This, predictably, leads to all sorts of crashes. Pass in a pointer to the bio pointer, and clear it for the merge case. Then the caller knows that the bio is already queued, and no new requests need to get allocated. Fixes: 5b13bc8a3fd5 ("blk-mq: cleanup request allocation") Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>