summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-12-20block-throttle: avoid double chargeShaohua Li2-7/+3
If a bio is throttled and split after throttling, the bio could be resubmited and enters the throttling again. This will cause part of the bio to be charged multiple times. If the cgroup has an IO limit, the double charge will significantly harm the performance. The bio split becomes quite common after arbitrary bio size change. To fix this, we always set the BIO_THROTTLED flag if a bio is throttled. If the bio is cloned/split, we copy the flag to new bio too to avoid a double charge. However, cloned bio could be directed to a new disk, keeping the flag be a problem. The observation is we always set new disk for the bio in this case, so we can clear the flag in bio_set_dev(). This issue exists for a long time, arbitrary bio size change just makes it worse, so this should go into stable at least since v4.2. V1-> V2: Not add extra field in bio based on discussion with Tejun Cc: Vivek Goyal <vgoyal@redhat.com> Cc: stable@vger.kernel.org Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18block: fix blk_rq_append_bioJens Axboe1-16/+22
Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by: Michele Ballabio <barra_cuda@katamail.com> (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18block: don't let passthrough IO go into .make_request_fn()Ming Lei1-2/+4
Commit a8821f3f3("block: Improvements to bounce-buffer handling") tries to make sure that the bio to .make_request_fn won't exceed BIO_MAX_PAGES, but ignores that passthrough I/O can use blk_queue_bounce() too. Especially, passthrough IO may not be sector-aligned, and the check of 'sectors < bio_sectors(*bio_orig)' inside __blk_queue_bounce() may become true even though the max bvec number doesn't exceed BIO_MAX_PAGES, then cause the bio splitted, and the original passthrough bio is submited to generic_make_request(). This patch fixes this issue by checking if the bio is passthrough IO, and use bio_kmalloc() to allocate the cloned passthrough bio. Cc: NeilBrown <neilb@suse.com> Fixes: a8821f3f3("block: Improvements to bounce-buffer handling") Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-06kyber: fix another domain token wait queue hangOmar Sandoval1-13/+24
Commit 8cf466602028 ("kyber: fix hang on domain token wait queue") fixed a hang caused by leaving wait entries on the domain token wait queue after the __sbitmap_queue_get() retry succeeded, making that wait entry a "dud" which won't in turn wake more entries up. However, we can also get a dud entry if kyber_get_domain_token() fails once but is then called again and succeeds. This can happen if the hardware queue is rerun for some other reason, or, more likely, kyber_dispatch_request() tries the same domain twice. The fix is to remove our entry from the wait queue whenever we successfully get a token. The only complication is that we might be on one of many wait queues in the struct sbitmap_queue, but that's easily fixed by remembering which wait queue we were put on. While we're here, only initialize the wait queue entry once instead of on every wait, and use spin_lock_irq() instead of spin_lock_irqsave(), since this is always called from process context with irqs enabled. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds4-13/+10
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-11-23blk-wbt: fix comments typoweiping zhang1-1/+1
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23blk-wbt: move wbt_clear_stat to common place in wbt_doneweiping zhang1-2/+1
wbt_done call wbt_clear_stat no matter current stat was tracked or not, move it to common place. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23blk-sysfs: remove NULL pointer checking in queue_wb_lat_storeweiping zhang1-4/+1
wbt_init doesn't set q->rq_wb to NULL, if wbt_init return 0, so check return value is enough, remove NULL checking. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23blk-wbt: remove duplicated setting in wbt_initweiping zhang1-2/+0
rwb->wc and rwb->queue_depth were overwritten by wbt_set_write_cache and wbt_set_queue_depth, remove the default setting. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-22block: remove useless assignment in bio_splitMikulas Patocka1-1/+1
Remove useless assignment to the variable "split" because the variable is unconditionally assigned later. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook2-8/+7
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21block/laptop_mode: Convert timers to use timer_setup()Kees Cook1-5/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: linux-block@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-19block: genhd.c: fix message typoRandy Dunlap1-1/+1
Fix typo in error message. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-19block: add WARN_ON if bdi register failweiping zhang1-2/+5
device_add_disk need do more safety error handle, so this patch just add WARN_ON. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Adapted for current series by me. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-17Merge branch 'work.iov_iter' of ↵Linus Torvalds2-126/+73
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: - bio_{map,copy}_user_iov() series; those are cleanups - fixes from the same pile went into mainline (and stable) in late September. - fs/iomap.c iov_iter-related fixes - new primitive - iov_iter_for_each_range(), which applies a function to kernel-mapped segments of an iov_iter. Usable for kvec and bvec ones, the latter does kmap()/kunmap() around the callback. _Not_ usable for iovec- or pipe-backed iov_iter; the latter is not hard to fix if the need ever appears, the former is by design. Another related primitive will have to wait for the next cycle - it passes page + offset + size instead of pointer + size, and that one will be usable for everything _except_ kvec. Unfortunately, that one didn't get exposure in -next yet, so... - a bit more lustre iov_iter work, including a use case for iov_iter_for_each_range() (checksum calculation) - vhost/scsi leak fix in failure exit - misc cleanups and detritectomy... * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits) iomap_dio_actor(): fix iov_iter bugs switch ksocknal_lib_recv_...() to use of iov_iter_for_each_range() lustre: switch struct ksock_conn to iov_iter vhost/scsi: switch to iov_iter_get_pages() fix a page leak in vhost_scsi_iov_to_sgl() error recovery new primitive: iov_iter_for_each_range() lnet_return_rx_credits_locked: don't abuse list_entry xen: don't open-code iov_iter_kvec() orangefs: remove detritus from struct orangefs_kiocb_s kill iov_shorten() bio_alloc_map_data(): do bmd->iter setup right there bio_copy_user_iov(): saner bio size calculation bio_map_user_iov(): get rid of copying iov_iter bio_copy_from_iter(): get rid of copying iov_iter move more stuff down into bio_copy_user_iov() blk_rq_map_user_iov(): move iov_iter_advance() down bio_map_user_iov(): get rid of the iov_for_each() bio_map_user_iov(): move alignment check into the main loop don't rely upon subsequent bio_add_pc_page() calls failing ... and with iov_iter_get_pages_alloc() it becomes even simpler ...
2017-11-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds6-76/+199
Pull more block layer updates from Jens Axboe: "A followup pull request, with some parts that either needed a bit more testing before going in, merge sync, or just later arriving fixes. This contains: - Timer related updates from Kees. These were purposefully delayed since I didn't want to pull in a later v4.14-rc tag to my block tree. - ide-cd prep sense buffer fix from Bart. Also delayed, as not to clash with the late fix we put into 4.14-rc. - Small BFQ updates series from Luca and Paolo. - Single nvmet fix from James, fixing a non-functional case there. - Bio fast clone fix from Michael, which made bcache return the wrong data for some cases. - Legacy IO path regression hang fix from Ming" * 'for-linus' of git://git.kernel.dk/linux-block: bio: ensure __bio_clone_fast copies bi_partno nvmet_fc: fix better length checking block: wake up all tasks blocked in get_request() block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUP block, bfq: update blkio stats outside the scheduler lock block, bfq: add missing invocations of bfqg_stats_update_io_add/remove doc, block, bfq: update max IOPS sustainable with BFQ ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointer md: Convert timers to use timer_setup() block: swim3: Convert timers to use timer_setup() block/aoe: Convert timers to use timer_setup() amifloppy: Convert timers to use timer_setup() block/floppy: Convert callback to pass timer_list
2017-11-17bio: ensure __bio_clone_fast copies bi_partnoMichael Lyle1-0/+1
A new field was introduced in 74d46992e0d9, bi_partno, instead of using bdev->bd_contains and encoding the partition information in the bi_bdev field. __bio_clone_fast was changed to copy the disk information, but not the partition information. At minimum, this regressed bcache and caused data corruption. Signed-off-by: Michael Lyle <mlyle@lyle.org> Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reported-by: Pavel Goran <via-bcache@pvgoran.name> Reported-by: Campbell Steven <casteven@gmail.com> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15block: wake up all tasks blocked in get_request()Ming Lei1-2/+2
Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But if there are tasks blocked in get_request(), q->q_usage_counter can never become zero. So we have to wake up all these tasks in blk_set_queue_dying() first. Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15block/blk-mq.c: use kmalloc_array_node()Johannes Thumshirn1-1/+1
Now that we have a NUMA-aware version of kmalloc_array() we can use it instead of kmalloc_node() without an overflow check in the size calculation. Link: http://lkml.kernel.org/r/20170927082038.3782-3-jthumshirn@suse.de Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUPLuca Miccio3-73/+93
BFQ currently creates, and updates, its own instance of the whole set of blkio statistics that cfq creates. Yet, from the comments of Tejun Heo in [1], it turned out that most of these statistics are meant/useful only for debugging. This commit makes BFQ create the latter, debugging statistics only if the option CONFIG_DEBUG_BLK_CGROUP is set. By doing so, this commit also enables BFQ to enjoy a high perfomance boost. The reason is that, if CONFIG_DEBUG_BLK_CGROUP is not set, then BFQ has to update far fewer statistics, and, in particular, not the heaviest to update. To give an idea of the benefits, if CONFIG_DEBUG_BLK_CGROUP is not set, then, on an Intel i7-4850HQ, and with 8 threads doing random I/O in parallel on null_blk (configured with 0 latency), the throughput of BFQ grows from 310 to 400 KIOPS (+30%). We have measured similar or even much higher boosts with other CPUs: e.g., +45% with an ARM CortexTM-A53 Octa-core. Our results have been obtained and can be reproduced very easily with the script in [1]. [1] https://www.spinics.net/lists/linux-block/msg18943.html Suggested-by: Tejun Heo <tj@kernel.org> Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14block, bfq: update blkio stats outside the scheduler lockPaolo Valente2-12/+99
bfq invokes various blkg_*stats_* functions to update the statistics contained in the special files blkio.bfq.* in the blkio controller groups, i.e., the I/O accounting related to the proportional-share policy provided by bfq. The execution of these functions takes a considerable percentage, about 40%, of the total per-request execution time of bfq (i.e., of the sum of the execution time of all the bfq functions that have to be executed to process an I/O request from its creation to its destruction). This reduces the request-processing rate sustainable by bfq noticeably, even on a multicore CPU. In fact, the bfq functions that invoke blkg_*stats_* functions cannot be executed in parallel with the rest of the code of bfq, because both are executed under the same same per-device scheduler lock. To reduce this slowdown, this commit moves, wherever possible, the invocation of these functions (more precisely, of the bfq functions that invoke blkg_*stats_* functions) outside the critical sections protected by the scheduler lock. With this change, and with all blkio.bfq.* statistics enabled, the throughput grows, e.g., from 250 to 310 KIOPS (+25%) on an Intel i7-4850HQ, in case of 8 threads doing random I/O in parallel on null_blk, with the latter configured with 0 latency. We obtained the same or higher throughput boosts, up to +30%, with other processors (some figures are reported in the documentation). For our tests, we used the script [1], with which our results can be easily reproduced. NOTE. This commit still protects the invocation of blkg_*stats_* functions with the request_queue lock, because the group these functions are invoked on may otherwise disappear before or while these functions are executed. Fortunately, tests without even this lock show, by difference, that the serialization caused by this lock has a little impact (at most ~5% of throughput reduction). [1] https://github.com/Algodev-github/IOSpeed Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14block, bfq: add missing invocations of bfqg_stats_update_io_add/removeLuca Miccio1-3/+18
bfqg_stats_update_io_add and bfqg_stats_update_io_remove are to be invoked, respectively, when an I/O request enters and when an I/O request exits the scheduler. Unfortunately, bfq does not fully comply with this scheme, because it does not invoke these functions for requests that are inserted into or extracted from its priority dispatch list. This commit fixes this mistake. Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-1/+1
Pull MD update from Shaohua Li: "This update mostly includes bug fixes: - md-cluster now supports raid10 from Guoqing - raid5 PPL fixes from Artur - badblock regression fix from Bo - suspend hang related fixes from Neil - raid5 reshape fixes from Neil - raid1 freeze deadlock fix from Nate - memleak fixes from Zdenek - bitmap related fixes from Me and Tao - other fixes and cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits) md: free unused memory after bitmap resize md: release allocated bitset sync_set md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb md: be cautious about using ->curr_resync_completed for ->recovery_offset badblocks: fix wrong return value in badblocks_set if badblocks are disabled md: don't check MD_SB_CHANGE_CLEAN in md_allow_write md-cluster: update document for raid10 md: remove redundant variable q raid1: remove obsolete code in raid1_write_request md-cluster: Use a small window for raid10 resync md-cluster: Suspend writes in RAID10 if within range md-cluster/raid10: set "do_balance = 0" if area is resyncing md: use lockdep_assert_held raid1: prevent freeze_array/wait_all_barriers deadlock md: use TASK_IDLE instead of blocking signals md: remove special meaning of ->quiesce(.., 2) md: allow metadata update while suspending. md: use mddev_suspend/resume instead of ->quiesce() md: move suspend_hi/lo handling into core md code md: don't call bitmap_create() while array is quiesced. ...
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds26-616/+1097
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-10blk-mq: fixup some comment typos and lengthsJens Axboe1-7/+10
Various typos and/or spelling errors in comments. Fixes a few > 80 char lines as well. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: improve tag waiting setup for non-shared tagsJens Axboe1-26/+55
If we run out of driver tags, we currently treat shared and non-shared tags the same - both cases hook into the tag waitqueue. This is a bit more costly than it needs to be on unshared tags, since we have to both grab the hctx lock, and the waitqueue lock (and disable interrupts). For the non-shared case, we can simply mark the queue as needing a restart. Split blk_mq_dispatch_wait_add() to account for both cases, and rename it to blk_mq_mark_tag_wait() to better reflect what it does now. Without this patch, shared and non-shared performance is about the same with 4 fio thread hammering on a single null_blk device (~410K, at 75% sys). With the patch, the shared case is the same, but the non-shared tags case runs at 431K at 71% sys. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: only run the hardware queue if IO is pendingJens Axboe3-15/+12
Currently we are inconsistent in when we decide to run the queue. Using blk_mq_run_hw_queues() we check if the hctx has pending IO before running it, but we don't do that from the individual queue run function, blk_mq_run_hw_queue(). This results in a lot of extra and pointless queue runs, potentially, on flush requests and (much worse) on tag starvation situations. This is observable just looking at top output, with lots of kworkers active. For the !async runs, it just adds to the CPU overhead of blk-mq. Move the has-pending check into the run function instead of having callers do it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: avoid null pointer dereference on null diskColin Ian King1-1/+1
It is possible that the pointer disk can be null and hence we can get a null pointer deference when accessing disk->flags. Add a null pointer check to avoid the dereference. Detected by CoverityScan, CID#1461133 ("Explicit null dereferenced") Fixes: 8ddcd653257c ("block: introduce GENHD_FL_HIDDEN") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: create 'slaves' and 'holders' entries for hidden gendisksHannes Reinecke1-7/+7
When creating nvme multipath devices we should populate the 'slaves' and 'holders' directorys properly to aid userspace topology detection. Signed-off-by: Hannes Reinecke <hare@suse.com> [hch: split from a larger patch] Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block, nvme: Introduce blk_mq_req_flags_tBart Van Assche3-9/+9
Several block layer and NVMe core functions accept a combination of BLK_MQ_REQ_* flags through the 'flags' argument but there is no verification at compile time whether the right type of block layer flags is passed. Make it possible for sparse to verify this. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: linux-nvme@lists.infradead.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block, scsi: Make SCSI quiesce and resume work reliablyBart Van Assche2-10/+36
The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flagBart Van Assche2-0/+31
This flag will be used in the next patch to let the block layer core know whether or not a SCSI request queue has been quiesced. A quiesced SCSI queue namely only processes RQF_PREEMPT requests. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Introduce BLK_MQ_REQ_PREEMPTBart Van Assche2-1/+5
Set RQF_PREEMPT if BLK_MQ_REQ_PREEMPT is passed to blk_get_request_flags(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Introduce blk_get_request_flags()Bart Van Assche1-15/+35
A side effect of this patch is that the GFP mask that is passed to several allocation functions in the legacy block layer is changed from GFP_KERNEL into __GFP_DIRECT_RECLAIM. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Make q_usage_counter also track legacy requestsMing Lei2-8/+14
This patch makes it possible to pause request allocation for the legacy block layer by calling blk_mq_freeze_queue() and blk_mq_unfreeze_queue(). Signed-off-by: Ming Lei <ming.lei@redhat.com> [ bvanassche: Combined two patches into one, edited a comment and made sure REQ_NOWAIT is handled properly in blk_old_get_request() ] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: fix issue with shared tag queue re-runningJens Axboe2-38/+48
This patch attempts to make the case of hctx re-running on driver tag failure more robust. Without this patch, it's pretty easy to trigger a stall condition with shared tags. An example is using null_blk like this: modprobe null_blk queue_mode=2 nr_devices=4 shared_tags=1 submit_queues=1 hw_queue_depth=1 which sets up 4 devices, sharing the same tag set with a depth of 1. Running a fio job ala: [global] bs=4k rw=randread norandommap direct=1 ioengine=libaio iodepth=4 [nullb0] filename=/dev/nullb0 [nullb1] filename=/dev/nullb1 [nullb2] filename=/dev/nullb2 [nullb3] filename=/dev/nullb3 will inevitably end with one or more threads being stuck waiting for a scheduler tag. That IO is then stuck forever, until someone else triggers a run of the queue. Ensure that we always re-run the hardware queue, if the driver tag we were waiting for got freed before we added our leftover request entries back on the dispatch list. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Tested-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: Avoid that request queue removal can trigger list corruptionBart Van Assche1-0/+1
Avoid that removal of a request queue sporadically triggers the following warning: list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0 Call Trace: process_one_work+0x11b/0x660 worker_thread+0x3d/0x3b0 kthread+0x129/0x140 ret_from_fork+0x27/0x40 Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: put driver tag if dispatch budget can't be gotMing Lei1-1/+3
We have to put the driver tag if dispatch budget can't be got, otherwise it might cause IO deadlock, especially in case that size of tags is very small. Fixes: de1482974080(blk-mq: introduce .get_budget and .put_budget in blk_mq_ops) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: pass full fmode_t to blk_verify_commandChristoph Hellwig2-14/+12
Use the obvious calling convention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: remove __bio_kmap_atomicChristoph Hellwig1-1/+1
This helper doesn't buy us much over calling kmap_atomic directly. In fact in the only caller it does a bit of useless work as the caller already has the bvec at hand, and said caller would even buggy for a multi-segment bio due to the use of this helper. So just remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10Revert "blk-mq: don't handle TAG_SHARED in restart"Jens Axboe1-4/+74
This reverts commit 358a3a6bccb74da9d63a26b2dd5f09f1e9970e0b. We have cases that aren't covered 100% in the drivers, so for now we have to retain the shared tag restart loops. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar43-0/+43
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04blk-mq: don't allocate driver tag upfront for flush rqMing Lei3-81/+37
The idea behind it is simple: 1) for none scheduler, driver tag has to be borrowed for flush rq, otherwise we may run out of tag, and that causes an IO hang. And get/put driver tag is actually noop for none, so reordering tags isn't necessary at all. 2) for a real I/O scheduler, we need not allocate a driver tag upfront for flush rq. It works just fine to follow the same approach as normal requests: allocate driver tag for each rq just before calling ->queue_rq(). One driver visible change is that the driver tag isn't shared in the flush request sequence. That won't be a problem, since we always do that in legacy path. Then flush rq need not be treated specially wrt. get/put driver tag. This cleans up the code - for instance, reorder_tags_to_front() can be removed, and we needn't worry about request ordering in dispatch list for avoiding I/O deadlock. Also we have to put the driver tag before requeueing. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq: move blk_mq_put_driver_tag*() into blk-mq.hMing Lei2-32/+33
We need this helper to put the driver tag for flush rq, since we will not share tag in the flush request sequence in the following patch in case that I/O scheduler is applied. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq-sched: decide how to handle flush rq via RQF_FLUSH_SEQMing Lei1-13/+16
In case of IO scheduler we always pre-allocate one driver tag before calling blk_insert_flush(), and flush request will be marked as RQF_FLUSH_SEQ once it is in flush machinery. So if RQF_FLUSH_SEQ isn't set, we call blk_insert_flush() to handle the request, otherwise the flush request is dispatched to ->dispatch list directly. This is a preparation patch for not preallocating a driver tag for flush requests, and for not treating flush requests as a special case. This is similar to what the legacy path does. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-flush: use blk_mq_request_bypass_insert()Ming Lei1-1/+1
In the following patch, we will use RQF_FLUSH_SEQ to decide: 1) if the flag isn't set, the flush rq need to be inserted via blk_insert_flush() 2) otherwise, the flush rq need to be dispatched directly since it is in flush machinery now. So we use blk_mq_request_bypass_insert() for requests of bypassing flush machinery, just like the legacy path did. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04block: pass 'run_queue' to blk_mq_request_bypass_insertMing Lei3-4/+5
Block flush need this function without running the queue, so add a parameter controlling whether we run it or not. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-flush: don't run queue for requests bypassing flushMing Lei1-1/+1
blk_insert_flush() should only insert request since run queue always follows it. In case of bypassing flush, we don't need to run queue because every blk_insert_flush() follows one run queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq: put the driver tag of nxt rq before first one is requeuedJianchao Wang1-10/+9
When freeing the driver tag of the next rq with an I/O scheduler configured, we get the first entry of the list. However, this can race with requeue of a request, and we end up getting the wrong request from the head of the list. Free the driver tag of next rq before the failed one is requeued in the failure branch of queue_rq callback. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blkcg: add sanity check for blkcg policy operationsweiping zhang1-0/+5
blkcg policy should keep cpd/pd's alloc_fn and free_fn in pairs, otherwise policy would register fail. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>