summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-3/+5
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-18partitions/ldm: Replace uuid_copy() with import_uuid() where it makes senseAndy Shevchenko1-1/+1
There is a specific API to treat raw data as UUID, i.e. import_uuid(). Use it instead of uuid_copy() with explicit casting. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17block: update hctx map when use multiple mapsWeiping Zhang1-1/+3
There is an issue when tune the number for read and write queues, if the total queue count was not changed. The hctx->type cannot be updated, since __blk_mq_update_nr_hw_queues will return directly if the total queue count has not been changed. Reproduce: dmesg | grep "default/read/poll" [ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default tune the write queues to 24: echo 24 > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dmesg | grep "default/read/poll" [ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default The driver's hardware queue mapping is not same as block layer. Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15block: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-15blk-mq: Remove redundant 'return' statementBaolin Wang1-1/+1
The blk_mq_all_tag_iter() is a void function, thus remove the redundant 'return' statement in this function. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds3-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada3-19/+19
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-07blk-mq: fix blk_mq_all_tag_iterMing Lei1-3/+9
blk_mq_all_tag_iter() is added to iterate all requests, so we should fetch the request from ->static_rqs][] instead of ->rqs[] which is for holding in-flight request only. Fix it by adding flag of BT_TAG_ITER_STATIC_RQS. Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline") Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-07blk-mq: split out a __blk_mq_get_driver_tag helperChristoph Hellwig4-30/+35
Allocation of the driver tag in the case of using a scheduler shares very little code with the "normal" tag allocation. Split out a new helper to streamline this path, and untangle it from the complex normal tag allocation. This way also avoids to fail driver tag allocation because of inactive hctx during cpu hotplug, and fixes potential hang risk. Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: John Garry <john.garry@huawei.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04block: nr_sects_write(): Disable preemption on seqcount writeAhmed S. Darwish1-0/+2
For optimized block readers not holding a mutex, the "number of sectors" 64-bit value is protected from tearing on 32-bit architectures by a sequence counter. Disable preemption before entering that sequence counter's write side critical section. Otherwise, the read side can preempt the write side section and spin for the entire scheduler tick. If the reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock. Fixes: c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl") Cc: <stable@vger.kernel.org> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04block: remove the error argument to the block_bio_complete tracepointChristoph Hellwig1-2/+1
The status can be trivially derived from the bio itself. That also avoid callers like NVMe to incorrectly pass a blk_status_t instead of the errno, and the overhead of translating the blk_status_t to the errno in the I/O completion fast path when no tracing is enabled. Fixes: 35fe0d12c8a3 ("nvme: trace bio completion") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-02block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failedyu kuai1-1/+0
commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") added a kfree() for 'buf' if bio_integrity_add_page() returns '0'. However, the object will be freed in bio_integrity_free() since 'bio->bi_opf' and 'bio->bi_integrity' were set previousy in bio_integrity_alloc(). Fixes: commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") Signed-off-by: yu kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-02Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-6/+18
Pull block driver updates from Jens Axboe: "On top of the core changes, here are the block driver changes for this merge window: - NVMe changes: - NVMe over Fibre Channel protocol updates, which also reach over to drivers/scsi/lpfc (James Smart) - namespace revalidation support on the target (Anthony Iliopoulos) - gcc zero length array fix (Arnd Bergmann) - nvmet cleanups (Chaitanya Kulkarni) - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg) - use a SRQ per completion vector (Max Gurtovoy) - fix handling of runtime changes to the queue count (Weiping Zhang) - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" - Floppy code cleanup series (Willy, Denis) - Floppy contention fix (Jiri) - Loop CONFIGURE support (Martijn) - bcache fixes/improvements (Coly, Joe, Colin) - q->queuedata cleanups (Christoph) - Get rid of ioctl_by_bdev (Christoph, Stefan) - md/raid5 allocation fixes (Coly) - zero length array fixes (Gustavo) - swim3 task state fix (Xu)" * tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits) bcache: configure the asynchronous registertion to be experimental bcache: asynchronous devices registration bcache: fix refcount underflow in bcache_device_free() bcache: Convert pr_<level> uses to a more typical style bcache: remove redundant variables i and n lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure ...
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds36-859/+2879
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02mm: move readahead prototypes from mm.hMatthew Wilcox (Oracle)1-0/+1
Patch series "Change readahead API", v11. This series adds a readahead address_space operation to replace the readpages operation. The key difference is that pages are added to the page cache as they are allocated (and then looked up by the filesystem) instead of passing them on a list to the readpages operation and having the filesystem add them to the page cache. It's a net reduction in code for each implementation, more efficient than walking a list, and solves the direct-write vs buffered-read problem reported by yu kuai at http://lkml.kernel.org/r/20200116063601.39201-1-yukuai3@huawei.com The only unconverted filesystems are those which use fscache. Their conversion is pending Dave Howells' rewrite which will make the conversion substantially easier. This should be completed by the end of the year. I want to thank the reviewers/testers; Dave Chinner, John Hubbard, Eric Biggers, Johannes Thumshirn, Dave Sterba, Zi Yan, Christoph Hellwig and Miklos Szeredi have done a marvellous job of providing constructive criticism. These patches pass an xfstests run on ext4, xfs & btrfs with no regressions that I can tell (some of the tests seem a little flaky before and remain flaky afterwards). This patch (of 25): The readahead code is part of the page cache so should be found in the pagemap.h file. force_page_cache_readahead is only used within mm, so move it to mm/internal.h instead. Remove the parameter names where they add no value, and rename the ones which were actively misleading. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-1-willy@infradead.org Link: http://lkml.kernel.org/r/20200414150233.24495-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-29blk-wbt: rename __wbt_update_limits to wbt_update_limitsGuoqing Jiang1-4/+4
Now let's rename __wbt_update_limits to wbt_update_limits after the previous one is deleted. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-wbt: remove wbt_update_limitsGuoqing Jiang2-12/+0
No one call this function after commit 2af2783f2ea4f ("rq-qos: get rid of redundant wbt_update_limits()"), so remove it. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-throttle: remove tg_drain_biosGuoqing Jiang1-22/+0
After blk_throtl_drain is removed, there is no caller of tg_drain_bios, so remove it as well. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-throttle: remove blk_throtl_drainGuoqing Jiang2-43/+0
After the commit 5addeae1bedc4 ("blk-cgroup: remove blkcg_drain_queue"), there is no caller of blk_throtl_drain, so let's remove it. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: drain I/O when all CPUs in a hctx are offlineMing Lei3-2/+120
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: add blk_mq_all_tag_iterMing Lei2-18/+34
Add a new blk_mq_all_tag_iter function to iterate over all allocated scheduler tags and driver tags. This is more flexible than the existing blk_mq_all_tag_busy_iter function as it allows the callers to do whatever they want on allocated request instead of being limited to started requests. It will be used to implement draining allocated requests on specified hctx in this patchset. [hch: switch from the two booleans to a more readable flags field and consolidate the tags iter functions] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Bart van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctxChristoph Hellwig1-21/+23
blk_mq_alloc_request_hctx is only used for NVMeoF connect commands, so tailor it to the specific requirements, and don't bother the general fast path code with its special twinkles. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: use BLK_MQ_NO_TAG in more placesChristoph Hellwig3-13/+13
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAGChristoph Hellwig3-5/+5
To prepare for wider use of this constant give it a more applicable name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: move more request initialization to blk_mq_rq_ctx_initChristoph Hellwig1-17/+19
Don't split request initialization between __blk_mq_alloc_request and blk_mq_rq_ctx_init. Also remove the op argument as it can be derived from the blk_mq_alloc_data structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: simplify the blk_mq_get_request calling conventionChristoph Hellwig1-14/+22
The bio argument is entirely unused, and the request_queue can be passed through the alloc_data, given that it needs to be filled out for the low-level tag allocation anyway. Also rename the function to __blk_mq_alloc_request as the switch between get and alloc in the call chains is rather confusing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: remove the bio argument to ->prepare_requestChristoph Hellwig4-4/+4
None of the I/O schedulers actually needs it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: blk-mq: provide forced completion methodKeith Busch1-2/+13
Drivers may need to bypass error injection for error recovery. Rename __blk_mq_complete_request() to blk_mq_force_complete_rq() and export that function so drivers may skip potential fake timeouts after they've reclaimed lost requests. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-28Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"Jens Axboe1-7/+4
This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb. io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits. Cc: stable@vger.kernel.org # v5.6 Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: blk-crypto-fallback: remove redundant initialization of variable errColin Ian King1-1/+1
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Satya Tangirala <satyat@google.com> Addresses-Coverity: ("Unused value") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: reduce part_stat_lock() scopeChristoph Hellwig2-3/+5
We only need the stats lock (aka preempt_disable()) for updating the states, not for looking up or dropping the hd_struct reference. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: remove rcu_read_lock() from part_stat_lock()Konstantin Khlebnikov1-3/+8
The RCU lock is required only in disk_map_sector_rcu() to lookup the partition. After that request holds reference to related hd_struct. Replace get_cpu() with preempt_disable() - returned cpu index is unused. [hch: rebased] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: add a blk_account_io_merge_bio helperKonstantin Khlebnikov4-12/+19
Move the non-"new_io" branch of blk_account_io_start() into separate function. Fix merge accounting for discards (they were counted as write merges). The new blk_account_io_merge_bio() doesn't call update_io_ticks() unlike blk_account_io_start(), as there is no reason for that. [hch: rebased] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: account merge of two requestsKonstantin Khlebnikov1-7/+5
Also rename blk_account_io_merge() into blk_account_io_merge_request() to distinguish it from merging request and bio. [hch: rebased] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: always use a percpu variable for disk statsChristoph Hellwig3-12/+7
percpu variables have a perfectly fine working stub implementation for UP kernels, so use that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: move update_io_ticks to blk-core.cChristoph Hellwig3-17/+15
All callers are in blk-core.c, so move update_io_ticks over. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: remove generic_{start,end}_io_acctChristoph Hellwig1-39/+0
Remove these now unused functions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: add disk/bio-based accounting helpersChristoph Hellwig1-0/+34
Add two new helpers to simplify I/O accounting for bio based drivers. Currently these drivers use the generic_start_io_acct and generic_end_io_acct helpers which have very cumbersome calling conventions, don't actually return the time they started accounting, and try to deal with accounting for partitions, which can't happen for bio based drivers. The new helpers will be used to subsequently replace uses of the old helpers. The main API is the bio based wrappes in blkdev.h, but for zram which wants to account rw_page based I/O lower level routines are provided as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-22block: remove the disk and queue NULL checks in blkdev_issue_flushChristoph Hellwig1-8/+0
Both of these never can be NULL for a live block device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-22block: remove the error_sector argument to blkdev_issue_flushChristoph Hellwig1-15/+2
The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21s390/dasd: remove ioctl_by_bdev callsStefan Haberland1-6/+18
The IBM partition parser requires device type specific information only available to the DASD driver to correctly register partitions. The current approach of using ioctl_by_bdev with a fake user space pointer is discouraged. Fix this by replacing IOCTL calls with direct in-kernel function calls. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: Remove unused flush_queue_delayed in struct blk_flush_queueBaolin Wang2-2/+0
The flush_queue_delayed was introdued to hold queue if flush is running for non-queueable flush drive by commit 3ac0cc450870 ("hold queue if flush is running for non-queueable flush drive"), but the non mq parts of the flush code had been removed by commit 7e992f847a08 ("block: remove non mq parts from the flush code"), as well as removing the usage of the flush_queue_delayed flag. Thus remove the unused flush_queue_delayed flag. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: Fix type of first compat_put_{,u}long() argumentBart Van Assche1-2/+2
This patch fixes the following sparse warnings: block/ioctl.c:209:16: warning: incorrect type in argument 1 (different address spaces) block/ioctl.c:209:16: expected void const volatile [noderef] <asn:1> * block/ioctl.c:209:16: got signed int [usertype] *argp block/ioctl.c:214:16: warning: incorrect type in argument 1 (different address spaces) block/ioctl.c:214:16: expected void const volatile [noderef] <asn:1> * block/ioctl.c:214:16: got unsigned int [usertype] *argp block/ioctl.c:666:40: warning: incorrect type in argument 1 (different address spaces) block/ioctl.c:666:40: expected signed int [usertype] *argp block/ioctl.c:666:40: got void [noderef] <asn:1> *argp block/ioctl.c:672:41: warning: incorrect type in argument 1 (different address spaces) block/ioctl.c:672:41: expected unsigned int [usertype] *argp block/ioctl.c:672:41: got void [noderef] <asn:1> *argp Fixes: 9b81648cb5e3 ("compat_ioctl: simplify up block/ioctl.c") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: merge part_{inc,dev}_in_flight into their only callersChristoph Hellwig3-26/+8
part_inc_in_flight and part_dec_in_flight only have one caller each, and those callers are purely for bio based drivers. Merge each function into the only caller, and remove the superflous blk-mq checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: don't call part_{inc,dec}_in_flight for blk-mq devicesChristoph Hellwig2-18/+5
part_inc_in_flight and part_dec_in_flight are no-ops for blk-mq queues, so remove the calls in purely blk-mq callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: move the blk-mq calls out of part_in_flight{,_rw}Christoph Hellwig1-14/+14
Don't bother to call part_in_flight / part_in_flight_rw on blk-mq devices, just call the blk-mq versions directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19block: mark blk_account_io_completion staticChristoph Hellwig2-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: allow blk_mq_make_request to consume the q_usage_counter referenceChristoph Hellwig3-30/+27
blk_mq_make_request currently needs to grab an q_usage_counter reference when allocating a request. This is because the block layer grabs one before calling blk_mq_make_request, but also releases it as soon as blk_mq_make_request returns. Remove the blk_queue_exit call after blk_mq_make_request returns, and instead let it consume the reference. This works perfectly fine for the block layer caller, just device mapper needs an extra reference as the old problem still persists there. Open code blk_queue_enter_live in device mapper, as there should be no other callers and this allows better documenting why we do a non-try get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: remove a pointless queue enter pair in blk_mq_alloc_request_hctxChristoph Hellwig1-3/+0
No need for two queue references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: remove a pointless queue enter pair in blk_mq_alloc_requestChristoph Hellwig1-3/+0
No need for two queue references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>