summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+4
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "My attempt to revitalize trivial queue I've been neglecting for years (what a disaster that was for this world, right? :) ) with patches collected from backlog that were still relevant and not applied elsewhere in the meantime" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: err.h: remove deprecated PTR_RET for good blk-mq: Fix typo in comment x86/boot: Fix comment spelling sh: mach-highlander: Fix comment spelling s390/dasd: Fix comment spelling mfd: wm8994: Fix comment spelling docs: Add reference in binfmt-misc.rst genirq: fix kerneldoc comment for irq_desc drm/amdgpu: fix two documentation mismatch issues HID: fix Kconfig word ordering list/hashtable: minor documentation corrections.
2020-03-30Merge branch 'efi-core-for-linus' of ↵Linus Torvalds2-10/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons: - The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol. - Preparatory work for RISC-V EFI support. The main changes are: - Boot time GDT handling changes - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. - Changes to load device firmware from EFI boot service memory regions - Various documentation updates and minor code cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ...
2020-03-30Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds2-0/+35
Pull block driver updates from Jens Axboe: - floppy driver cleanup series from Willy - NVMe updates and fixes (Various) - null_blk trace improvements (Chaitanya) - bcache fixes (Coly) - md fixes (via Song) - loop block size change optimizations (Martijn) - scnprintf() use (Takashi) * tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits) null_blk: add trace in null_blk_zoned.c null_blk: add tracepoint helpers for zoned mode block: add a zone condition debug helper nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts ...
2020-03-30Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds52-1192/+1438
Pull block updates from Jens Axboe: - Online capacity resizing (Balbir) - Number of hardware queue change fixes (Bart) - null_blk fault injection addition (Bart) - Cleanup of queue allocation, unifying the node/no-node API (Christoph) - Cleanup of genhd, moving code to where it makes sense (Christoph) - Cleanup of the partition handling code (Christoph) - disk stat fixes/improvements (Konstantin) - BFQ improvements (Paolo) - Various fixes and improvements * tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits) block: return NULL in blk_alloc_queue() on error block: move bio_map_* to blk-map.c Revert "blkdev: check for valid request queue before issuing flush" block: simplify queue allocation bcache: pass the make_request methods to blk_queue_make_request null_blk: use blk_mq_init_queue_data block: add a blk_mq_init_queue_data helper block: move the ->devnode callback to struct block_device_operations block: move the part_stat* helpers from genhd.h to a new header block: move block layer internals out of include/linux/genhd.h block: move guard_bio_eod to bio.c block: unexport get_gendisk block: unexport disk_map_sector_rcu block: unexport disk_get_part block: mark part_in_flight and part_in_flight_rw static block: mark block_depr static block: factor out requeue handling from dispatch code block/diskstats: replace time_in_queue with sum of request times block/diskstats: accumulate all per-cpu counters in one pass block/diskstats: more accurate approximation of io_ticks for slow disks ...
2020-03-29block: return NULL in blk_alloc_queue() on errorChaitanya Kulkarni1-1/+1
This patch fixes follwoing warning: block/blk-core.c: In function ‘blk_alloc_queue’: block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion] return -EINVAL; Fixes: 3d745ea5b095a ("block: simplify queue allocation") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27block: add a zone condition debug helperChaitanya Kulkarni1-0/+32
Add a helper to stringify the zone conditions. We use this helper in the next patch to track zone conditions in tracepoints. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27block: move bio_map_* to blk-map.cChristoph Hellwig3-509/+513
The bio_map_* helpers are just the low-level helpers for the blk_rq_map_* APIs. Move them together for better logical grouping, as no there isn't much overlap with other code in bio.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27Revert "blkdev: check for valid request queue before issuing flush"Christoph Hellwig1-9/+0
This reverts commit f10d9f617a65905c556c3b37c9b9646ae7d04ed7. We can't have queues without a make_request_fn any more (and the loop device uses blk-mq these days anyway..). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27block: simplify queue allocationChristoph Hellwig5-59/+28
Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27block: add a blk_mq_init_queue_data helperChristoph Hellwig1-1/+9
This allows a driver to pass a queuedata member before ->init_hctx is called. null_blk currently open codes this logic, but I'd rather have it in the core to ease future maintainance. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27block: move the ->devnode callback to struct block_device_operationsChristoph Hellwig1-2/+2
There really isn't any good reason to stash a method directly into struct gendisk. Move it together with the other block device operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move the part_stat* helpers from genhd.h to a new headerChristoph Hellwig1-0/+1
These macros are just used by a few files. Move them out of genhd.h, which is included everywhere into a new standalone header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move block layer internals out of include/linux/genhd.hChristoph Hellwig4-1/+118
None of this needs to be exposed to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move guard_bio_eod to bio.cChristoph Hellwig1-0/+43
This is bio layer functionality and not related to buffer heads. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport get_gendiskChristoph Hellwig1-1/+0
get_gendisk is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport disk_map_sector_rcuChristoph Hellwig1-1/+0
disk_map_sector_rcu is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport disk_get_partChristoph Hellwig1-1/+0
disk_get_part is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: mark part_in_flight and part_in_flight_rw staticChristoph Hellwig1-3/+4
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: mark block_depr staticChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: factor out requeue handling from dispatch codeJohannes Thumshirn1-11/+18
Factor out the requeue handling from the dispatch code, this will make subsequent addition of different requeueing schemes easier. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block/diskstats: replace time_in_queue with sum of request timesKonstantin Khlebnikov3-5/+10
Column "time_in_queue" in diskstats is supposed to show total waiting time of all requests. I.e. value should be equal to the sum of times from other columns. But this is not true, because column "time_in_queue" is counted separately in jiffies rather than in nanoseconds as other times. This patch removes redundant counter for "time_in_queue" and shows total time of read, write, discard and flush requests. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block/diskstats: accumulate all per-cpu counters in one passKonstantin Khlebnikov1-32/+70
Reading /proc/diskstats iterates over all cpus for summing each field. It's faster to sum all fields in one pass. Hammering /proc/diskstats with fio shows 2x performance improvement: fio --name=test --numjobs=$JOBS --filename=/proc/diskstats \ --size=1k --bs=1k --fallocate=none --create_on_open=1 \ --time_based=1 --runtime=10 --invalidate=0 --group_report JOBS=1 JOBS=10 Before: 7k iops 64k iops After: 18k iops 120k iops Also this way code is more compact: add/remove: 1/0 grow/shrink: 0/2 up/down: 194/-1540 (-1346) Function old new delta part_stat_read_all - 194 +194 diskstats_show 1344 631 -713 part_stat_show 1219 392 -827 Total: Before=14966947, After=14965601, chg -0.01% Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block/diskstats: more accurate approximation of io_ticks for slow disksKonstantin Khlebnikov2-6/+6
Currently io_ticks is approximated by adding one at each start and end of requests if jiffies counter has changed. This works perfectly for requests shorter than a jiffy or if one of requests starts/ends at each jiffy. If disk executes just one request at a time and they are longer than two jiffies then only first and last jiffies will be accounted. Fix is simple: at the end of request add up into io_ticks jiffies passed since last update rather than just one jiffy. Example: common HDD executes random read 4k requests around 12ms. fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 & iostat -x 10 sdb Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch: Before: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43 After: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99 Now io_ticks does not loose time between start and end of requests, but for queue-depth > 1 some I/O time between adjacent starts might be lost. For load estimation "%util" is not as useful as average queue length, but it clearly shows how often disk queue is completely empty. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: merge partition-generic.c and check.cChristoph Hellwig5-202/+166
Merge block/partition-generic.c and block/partitions/check.c into a single block/partitions/core.c as the content is closely related and both files are tiny. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move the various x86 Unix label formats out of genhd.hChristoph Hellwig1-0/+125
All these are just used in block/partitions/msdos.c, so move them out of the genhd.h driver included by every driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24partitions/msdos: remove LINUX_SWAP_PARTITIONChristoph Hellwig1-6/+12
Just always use NEW_SOLARIS_X86_PARTITION and explain the situation, as that is less confusing than two names for a single value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move the *_PARTITION enum out of genhd.hChristoph Hellwig2-0/+9
The enum containing the *_PARTITION symbolic names is only relevant for the partition parser. More specifically most values are MSDOS partition table system indicators and thus should go straight into msdos.c. One value is only used by the sun partition parser, and the sun and sgi partition parsers use the same value as the x86 Linux RAID indicator to also indicate RAID autodetection. Duplicate them in sun.c and sgi.c given that the different partition types use entirely different values otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move struct partition out of genhd.hChristoph Hellwig3-25/+17
struct partition is the on-disk format of a MSDOS partition table entry. Move it out of genhd.h into a new msdos_partition.h header and give it a msdos_ prefix to avoid confusion. Also move the magic number from block/partitions/msdos.h to the new header so that it can be used by the SCSI drivers looking at the DOS partition tables. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove block/partitions/sun.hChristoph Hellwig2-9/+3
Just move the two defines to block/partitions/sun.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove block/partitions/sgi.hChristoph Hellwig2-9/+2
Just move the single define to block/partitions/sgi.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove block/partitions/osf.hChristoph Hellwig2-8/+1
Just move the single define to block/partitions/osf.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove block/partitions/karma.hChristoph Hellwig2-7/+2
Just move the single define to block/partitions/karma.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: declare all partition detection routines in check.hChristoph Hellwig26-75/+22
There is no good reason to include one header per partition type in core.c. Instead move the prototypes for the detection routins to check.h, and remove all now empty headers in block/partitions/. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove warn_no_partChristoph Hellwig3-14/+6
The warn_no_part is initialized to 1 and never changed. Remove it and execute the code keyed off from it unconditionally. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: cleanup how md_autodetect_dev is calledChristoph Hellwig1-7/+4
Add a new include/linux/raid/detect.h header to declare the md_autodetect_dev prototype which can be shared between md and the partition code. Then use IS_BUILTIN to call it instead of the ifdef magic. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: unexport read_dev_sector and put_dev_sectorChristoph Hellwig2-19/+26
read_dev_sector and put_dev_sector are now only used by the partition parsing code. Remove the export for read_dev_sector and merge it into the only caller. Clean the mess up a bit by using goto labels and the SECTOR_SHIFT constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove alloc_part_info and free_part_infoChristoph Hellwig1-2/+4
There isn't any good reason not to simply open code the allocation and freeing of the partition_meta_info structure. Especially as one of the branches in alloc_part_info is entirely dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move sysfs methods shared by disks and partitions to genhd.cChristoph Hellwig3-76/+91
Move the sysfs _show methods that are used both on the full disk and partition nodes to genhd.c instead of hiding them in the partitioning code. Also move the declaration for these methods to block/blk.h so that we don't expose them to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move disk_name and related helpers out of partition-generic.cChristoph Hellwig3-32/+27
Thes functions aren't really related to partition support, so move them to a more suitable place. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove __bdevnameChristoph Hellwig1-14/+0
There is no good reason for __bdevname to exist. Just open code printing the string in the callers. For three of them the format string can be trivially merged into existing printk statements, and in init/do_mounts.c we can at least do the scnprintf once at the start of the function, and unconditional of CONFIG_BLOCK to make the output for tiny configfs a little more helpful. Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove the blk_lookup_devt exportChristoph Hellwig1-1/+0
This function is only used by init/do_mounts.c, which can't be modular. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offlinePaolo Valente1-7/+13
In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to flush the rb tree that contains all idle entities belonging to the pd (cgroup) being destroyed. In particular, bfq_flush_idle_tree() is invoked before bfq_reparent_active_queues(). Yet the latter may happen to add some entities to the idle tree. It happens if, in some of the calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(), the queue to move is empty and gets expired. This commit simply reverses the invocation order between bfq_flush_idle_tree() and bfq_reparent_active_queues(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: make reparent_leaf_entity actually work only on leaf entitiesPaolo Valente1-17/+31
bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf entity represents just a bfq_queue in an entity tree). Yet, the input entity is guaranteed to always be a leaf entity only in two-level entity trees. In this respect, because of the error fixed by commit 14afc5936197 ("block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened to actually have only two levels. After the latter commit, this does not hold any longer. This commit fixes this problem by modifying bfq_reparent_leaf_entity(), so that it searches an active leaf entity down the path that stems from the input entity. Such a leaf entity is guaranteed to exist when bfq_reparent_leaf_entity() is invoked. Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroupPaolo Valente3-6/+2
A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The goal of this put is to release a process reference to a bfq_queue. But process-reference releases may trigger also some extra operation, and, to this goal, are handled through bfq_release_process_ref(). So, turn the invocation of bfq_put_queue() into an invocation of bfq_release_process_ref(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: move forward the getting of an extra ref in bfq_bfqq_movePaolo Valente1-7/+7
Commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue from being freed during a group move") gets an extra reference to a bfq_queue before possibly deactivating it (temporarily), in bfq_bfqq_move(). This prevents the bfq_queue from disappearing before being reactivated in its new group. Yet, the bfq_queue may also be expired (i.e., its service may be stopped) before the bfq_queue is deactivated. And also an expiration may lead to a premature freeing. This commit fixes this issue by simply moving forward the getting of the extra reference already introduced by commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue from being freed during a group move"). Reported-by: cki-project@redhat.com Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: fix use-after-free in bfq_idle_slice_timer_bodyZhiqiang Liu1-4/+12
In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is not in bfqd-lock critical section. The bfqq, which is not equal to NULL in bfq_idle_slice_timer, may be freed after passing to bfq_idle_slice_timer_body. So we will access the freed memory. In addition, considering the bfqq may be in race, we should firstly check whether bfqq is in service before doing something on it in bfq_idle_slice_timer_body func. If the bfqq in race is not in service, it means the bfqq has been expired through __bfq_bfqq_expire func, and wait_request flags has been cleared in __bfq_bfqd_reset_in_service func. So we do not need to re-clear the wait_request of bfqq which is not in service. KASAN log is given as follows: [13058.354613] ================================================================== [13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290 [13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767 [13058.354646] [13058.354655] CPU: 96 PID: 19767 Comm: fork13 [13058.354661] Call trace: [13058.354667] dump_backtrace+0x0/0x310 [13058.354672] show_stack+0x28/0x38 [13058.354681] dump_stack+0xd8/0x108 [13058.354687] print_address_description+0x68/0x2d0 [13058.354690] kasan_report+0x124/0x2e0 [13058.354697] __asan_load8+0x88/0xb0 [13058.354702] bfq_idle_slice_timer+0xac/0x290 [13058.354707] __hrtimer_run_queues+0x298/0x8b8 [13058.354710] hrtimer_interrupt+0x1b8/0x678 [13058.354716] arch_timer_handler_phys+0x4c/0x78 [13058.354722] handle_percpu_devid_irq+0xf0/0x558 [13058.354731] generic_handle_irq+0x50/0x70 [13058.354735] __handle_domain_irq+0x94/0x110 [13058.354739] gic_handle_irq+0x8c/0x1b0 [13058.354742] el1_irq+0xb8/0x140 [13058.354748] do_wp_page+0x260/0xe28 [13058.354752] __handle_mm_fault+0x8ec/0x9b0 [13058.354756] handle_mm_fault+0x280/0x460 [13058.354762] do_page_fault+0x3ec/0x890 [13058.354765] do_mem_abort+0xc0/0x1b0 [13058.354768] el0_da+0x24/0x28 [13058.354770] [13058.354773] Allocated by task 19731: [13058.354780] kasan_kmalloc+0xe0/0x190 [13058.354784] kasan_slab_alloc+0x14/0x20 [13058.354788] kmem_cache_alloc_node+0x130/0x440 [13058.354793] bfq_get_queue+0x138/0x858 [13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328 [13058.354801] bfq_init_rq+0x1f4/0x1180 [13058.354806] bfq_insert_requests+0x264/0x1c98 [13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488 [13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0 [13058.354826] blk_flush_plug_list+0x230/0x548 [13058.354830] blk_finish_plug+0x60/0x80 [13058.354838] read_pages+0xec/0x2c0 [13058.354842] __do_page_cache_readahead+0x374/0x438 [13058.354846] ondemand_readahead+0x24c/0x6b0 [13058.354851] page_cache_sync_readahead+0x17c/0x2f8 [13058.354858] generic_file_buffered_read+0x588/0xc58 [13058.354862] generic_file_read_iter+0x1b4/0x278 [13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4] [13058.354972] __vfs_read+0x238/0x320 [13058.354976] vfs_read+0xbc/0x1c0 [13058.354980] ksys_read+0xdc/0x1b8 [13058.354984] __arm64_sys_read+0x50/0x60 [13058.354990] el0_svc_common+0xb4/0x1d8 [13058.354994] el0_svc_handler+0x50/0xa8 [13058.354998] el0_svc+0x8/0xc [13058.354999] [13058.355001] Freed by task 19731: [13058.355007] __kasan_slab_free+0x120/0x228 [13058.355010] kasan_slab_free+0x10/0x18 [13058.355014] kmem_cache_free+0x288/0x3f0 [13058.355018] bfq_put_queue+0x134/0x208 [13058.355022] bfq_exit_icq_bfqq+0x164/0x348 [13058.355026] bfq_exit_icq+0x28/0x40 [13058.355030] ioc_exit_icq+0xa0/0x150 [13058.355035] put_io_context_active+0x250/0x438 [13058.355038] exit_io_context+0xd0/0x138 [13058.355045] do_exit+0x734/0xc58 [13058.355050] do_group_exit+0x78/0x220 [13058.355054] __wake_up_parent+0x0/0x50 [13058.355058] el0_svc_common+0xb4/0x1d8 [13058.355062] el0_svc_handler+0x50/0xa8 [13058.355066] el0_svc+0x8/0xc [13058.355067] [13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464 [13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040) [13058.355077] The buggy address belongs to the page: [13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0 [13058.366175] flags: 0x2ffffe0000008100(slab|head) [13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780 [13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000 [13058.370789] page dumped because: kasan: bad access detected [13058.370791] [13058.370792] Memory state around the buggy address: [13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb [13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370808] ^ [13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [13058.370817] ================================================================== [13058.370820] Disabling lock debugging due to kernel taint Here, we directly pass the bfqd to bfq_idle_slice_timer_body func. -- V2->V3: rewrite the comment as suggested by Paolo Valente V1->V2: add one comment, and add Fixes and Reported-by tag. Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Acked-by: Paolo Valente <paolo.valente@linaro.org> Reported-by: Wang Wang <wangwang2@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18block/genhd: Notify udev about capacity changeBalbir Singh1-0/+24
Allow block/genhd to notify user space (via udev) about disk size changes using a new helper set_capacity_revalidate_and_notify(), which is a wrapper on top of set_capacity(). set_capacity_revalidate_and_notify() will only notify via udev if the current capacity or the target capacity is not zero and iff the capacity changes. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Someswarudu Sangaraju <ssomesh@amazon.com> Signed-off-by: Balbir Singh <sblbir@amazon.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18block: Prevent hung_check firing during long sync IOMing Lei1-1/+11
submit_bio_wait() can be called from ioctl(BLKSECDISCARD), which may take long time to complete, as Salman mentioned, 4K BLKSECDISCARD takes up to 100 second on some devices. Also any block I/O operation that occurs after the BLKSECDISCARD is submitted will also potentially be affected by the hung task timeouts. Another report is that task hang can be observed when running mkfs over raid10 which takes a small max discard sectors limit because of chunk size. So prevent hung_check from firing by taking same approach used in blk_execute_rq(), and the wake-up interval is set as half the hung_check timer period, which keeps overhead low enough. Cc: Salman Qazi <sqazi@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Bart Van Assche <bvanassche@acm.org> Link: https://lkml.org/lkml/2020/2/12/1193 Reported-by: Salman Qazi <sqazi@google.com> Reviewed-by: Jesse Barnes <jsbarnes@google.com> Reviewed-by: Salman Qazi <sqazi@google.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-17blk-mq: Fix typo in commentGabriela Bittencourt1-1/+1
Fix typo in words: 'vector' and 'query'. Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 01:55:20 +0000