summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2-3/+3
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds11-327/+439
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-11-03block: don't call blk_drain_queue() if elevator is not upTejun Heo1-2/+7
blk_cleanup_queue() may be called before elevator is set up on a queue which triggers the following oops. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70 ... Pid: 830, comm: kworker/0:2 Not tainted 3.1.0-next-20111025_64+ #1590 Bochs Bochs RIP: 0010:[<ffffffff8125a69c>] [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70 ... Call Trace: [<ffffffff8125da92>] blk_drain_queue+0x42/0x70 [<ffffffff8125db90>] blk_cleanup_queue+0xd0/0x1c0 [<ffffffff81469640>] md_free+0x50/0x70 [<ffffffff8126f43b>] kobject_release+0x8b/0x1d0 [<ffffffff81270d56>] kref_put+0x36/0xa0 [<ffffffff8126f2b7>] kobject_put+0x27/0x60 [<ffffffff814693af>] mddev_delayed_delete+0x2f/0x40 [<ffffffff81083450>] process_one_work+0x100/0x3b0 [<ffffffff8108527f>] worker_thread+0x15f/0x3a0 [<ffffffff81089937>] kthread+0x87/0x90 [<ffffffff81621834>] kernel_thread_helper+0x4/0x10 Fix it by making blk_cleanup_queue() check whether q->elevator is set up before invoking blk_drain_queue. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-31block: Change module.h -> export.h in bsg-lib.cPaul Gortmaker1-1/+1
This file isn't using full modular functionality, and hence can be "downgraded" to just using the export.h header. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31block: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macrosPaul Gortmaker2-0/+2
These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+71
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-25blk-throttle: use queue_is_locked() instead of lockdep_is_held()Jens Axboe1-1/+1
We can't use the latter if !CONFIG_LOCKDEP. Reported-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25blk-throttle: Take blkcg->lock while traversing blkcg->policy_listVivek Goyal1-14/+40
blkcg->policy_list is protected by blkcg->lock. Its not rcu protected list. So even for readers, they need to take blkcg->lock. There are few functions which were reading the list without taking lock. Fix it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25blk-throttle: Free up policy node associated with deleted ruleVivek Goyal1-0/+1
If a rule is being deleted, free up associated policy node. Otherwise that memory is leaked. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25block: warn if tag is greater than real_max_depth.Tao Ma1-2/+4
In case tag depth is reduced, it is max_depth not real_max_depth. So we should allow a request with tag >= max_depth, but for a tag >= real_max_depth, there really should be some problem. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24Merge branch 'for-linus' into for-3.2/coreJens Axboe2-2/+3
2011-10-24block: make gendisk hold a reference to its queueTejun Heo1-0/+8
The following command sequence triggers an oops. # mount /dev/sdb1 /mnt # echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete # umount /mnt general protection fault: 0000 [#1] PREEMPT SMP CPU 2 Modules linked in: Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs RIP: 0010:[<ffffffff810d0879>] [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60 ... Call Trace: [<ffffffff810d2845>] lock_acquire+0x95/0x140 [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50 [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70 [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0 [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0 [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0 [<ffffffff811c40df>] blkdev_put+0x5f/0x190 [<ffffffff8118f18d>] kill_block_super+0x4d/0x80 [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70 [<ffffffff8119003a>] deactivate_super+0x4a/0x70 [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130 [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0 [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b This is because bdev holds on to disk but disk doesn't pin the associated queue. If a SCSI device is removed while the device is still open, the sdev puts the base reference to the queue on release. When the bdev is finally released, the associated queue is already gone along with the bdi and bdev_inode_switch_bdi() ends up dereferencing already freed bdi. Even if it were not for this bug, disk not holding onto the associated queue is very unusual and error-prone. Fix it by making add_disk() take an extra reference to its queue and put it on disk_release() and ensuring that disk and its fops owner are put in that order after all accesses to the disk and queue are complete. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24blk-flush: move the queue kick intoJeff Moyer2-1/+2
A dm-multipath user reported[1] a problem when trying to boot a kernel with commit 4853abaae7e4a2af938115ce9071ef8684fb7af4 (block: fix flush machinery for stacking drivers with differring flush flags) applied. It turns out that an empty flush request can be sent into blk_insert_flush. When the BUG_ON was fixed to allow for this, I/O on the underlying device would stall. The reason is that blk_insert_cloned_request does not kick the queue. In the aforementioned commit, I had added a special case to kick the queue if data was sent down but the queue flags did not require a flush. A better solution is to push the queue kick up into blk_insert_cloned_request. This patch, along with a follow-on which fixes the BUG_ON, fixes the issue reported. [1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html Reported-by: Christophe Saout <christophe@saout.de> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Stable note: 3.1 Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24blk-flush: fix invalid BUG_ON in blk_insert_flushJeff Moyer1-1/+1
A user reported a regression due to commit 4853abaae7e4a2af938115ce9071ef8684fb7af4 (block: fix flush machinery for stacking drivers with differring flush flags). Part of the problem is that blk_insert_flush required a single bio be attached to the request. In reality, having no attached bio is also a valid case, as can be observed with an empty flush. [1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html Reported-by: Christophe Saout <christophe@saout.de> Signed-off-by: Jeff Moyer <jmoyer@redhat.com Acked-by: Tejun Heo <tj@kernel.org> Stable note: 3.1 Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24block: Remove the control of complete cpu from bio.Tao Ma1-3/+1
bio originally has the functionality to set the complete cpu, but it is broken. Chirstoph said that "This code is unused, and from the all the discussions lately pretty obviously broken. The only thing keeping it serves is creating more confusion and possibly more bugs." And Jens replied with "We can kill bio_set_completion_cpu(). I'm fine with leaving cpu control to the request based drivers, they are the only ones that can toggle the setting anyway". So this patch tries to remove all the work of controling complete cpu from a bio. Cc: Shaohua Li <shaohua.li@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24block: fix a typo in the blk-cgroup.h fileJie Liu1-1/+1
byptes -> bytes. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: fix request_queue lifetime handling by making blk_queue_cleanup() ↵Tejun Heo5-29/+87
properly shutdown request_queue is refcounted but actually depdends on lifetime management from the queue owner - on blk_cleanup_queue(), block layer expects that there's no request passing through request_queue and no new one will. This is fundamentally broken. The queue owner (e.g. SCSI layer) doesn't have a way to know whether there are other active users before calling blk_cleanup_queue() and other users (e.g. bsg) don't have any guarantee that the queue is and would stay valid while it's holding a reference. With delay added in blk_queue_bio() before queue_lock is grabbed, the following oops can be easily triggered when a device is removed with in-flight IOs. sd 0:0:1:0: [sdb] Stopping disk ata1.01: disabled general protection fault: 0000 [#1] PREEMPT SMP CPU 2 Modules linked in: Pid: 648, comm: test_rawio Not tainted 3.1.0-rc3-work+ #56 Bochs Bochs RIP: 0010:[<ffffffff8137d651>] [<ffffffff8137d651>] elv_rqhash_find+0x61/0x100 ... Process test_rawio (pid: 648, threadinfo ffff880019efa000, task ffff880019ef8a80) ... Call Trace: [<ffffffff8137d774>] elv_merge+0x84/0xe0 [<ffffffff81385b54>] blk_queue_bio+0xf4/0x400 [<ffffffff813838ea>] generic_make_request+0xca/0x100 [<ffffffff81383994>] submit_bio+0x74/0x100 [<ffffffff811c53ec>] dio_bio_submit+0xbc/0xc0 [<ffffffff811c610e>] __blockdev_direct_IO+0x92e/0xb40 [<ffffffff811c39f7>] blkdev_direct_IO+0x57/0x60 [<ffffffff8113b1c5>] generic_file_aio_read+0x6d5/0x760 [<ffffffff8118c1ca>] do_sync_read+0xda/0x120 [<ffffffff8118ce55>] vfs_read+0xc5/0x180 [<ffffffff8118cfaa>] sys_pread64+0x9a/0xb0 [<ffffffff81afaf6b>] system_call_fastpath+0x16/0x1b This happens because blk_queue_cleanup() destroys the queue and elevator whether IOs are in progress or not and DEAD tests are sprinkled in the request processing path without proper synchronization. Similar problem exists for blk-throtl. On queue cleanup, blk-throtl is shutdown whether it has requests in it or not. Depending on timing, it either oopses or throttled bios are lost putting tasks which are waiting for bio completion into eternal D state. The way it should work is having the usual clear distinction between shutdown and release. Shutdown drains all currently pending requests, marks the queue dead, and performs partial teardown of the now unnecessary part of the queue. Even after shutdown is complete, reference holders are still allowed to issue requests to the queue although they will be immmediately failed. The rest of teardown happens on release. This patch makes the following changes to make blk_queue_cleanup() behave as proper shutdown. * QUEUE_FLAG_DEAD is now set while holding both q->exit_mutex and queue_lock. * Unsynchronized DEAD check in generic_make_request_checks() removed. This couldn't make any meaningful difference as the queue could die after the check. * blk_drain_queue() updated such that it can drain all requests and is now called during cleanup. * blk_throtl updated such that it checks DEAD on grabbing queue_lock, drains all throttled bios during cleanup and free td when queue is released. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: drop @tsk from attempt_plug_merge() and explain sync rulesTejun Heo1-7/+21
attempt_plug_merge() accesses elevator without holding queue_lock and may call into ->elevator_bio_merge_fn(). The elvator is guaranteed to be valid because it's accessed iff the plugged list has requests and elevator is never exited with live requests, so as long as the elevator method can deal with unlocked access, this is safe. Explain the sync rules around attempt_plug_merge() and drop the unnecessary @tsk parameter. This patch doesn't introduce any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: make get_request[_wait]() fail if queue is deadTejun Heo1-16/+38
Currently get_request[_wait]() allocates request whether queue is dead or not. This patch makes get_request[_wait]() return NULL if @q is dead. blk_queue_bio() is updated to fail the submitted bio if request allocation fails. While at it, add docbook comments for get_request[_wait](). Note that the current code has rather unclear (there are spurious DEAD tests scattered around) assumption that the owner of a queue guarantees that no request travels block layer if the queue is dead and this patch in itself doesn't change much; however, this will allow fixing the broken assumption in the next patch. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: reorganize throtl_get_tg() and blk_throtl_bio()Tejun Heo3-41/+22
blk_throtl_bio() and throtl_get_tg() have rather unusual interface. * throtl_get_tg() returns pointer to a valid tg or ERR_PTR(-ENODEV), and drops queue_lock in the latter case. Different locking context depending on return value is error-prone and DEAD state is scheduled to be protected by queue_lock anyway. Move DEAD check inside queue_lock and return valid tg or NULL. * blk_throtl_bio() indicates return status both with its return value and in/out param **@bio. The former is used to indicate whether queue is found to be dead during throtl processing. The latter whether the bio is throttled. There's no point in returning DEAD check result from blk_throtl_bio(). The queue can die after blk_throtl_bio() is finished but before make_request_fn() grabs queue lock. Make it take *@bio instead and return boolean result indicating whether the request is throttled or not. This patch doesn't cause any visible functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: reorganize queue drainingTejun Heo3-26/+40
Reorganize queue draining related code in preparation of queue exit changes. * Factor out actual draining from elv_quiesce_start() to blk_drain_queue(). * Make elv_quiesce_start/end() responsible for their own locking. * Replace open-coded ELVSWITCH clearing in elevator_switch() with elv_quiesce_end(). This patch doesn't cause any visible functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()Tejun Heo2-9/+2
blk_get/put_queue() in scsi_cmd_ioctl() and throtl_get_tg() are completely bogus. The caller must have a reference to the queue on entry and taking an extra reference doesn't change anything. For scsi_cmd_ioctl(), the only effect is that it ends up checking QUEUE_FLAG_DEAD on entry; however, this is bogus as queue can die right after blk_get_queue(). Dead queue should be and is handled in request issue path (it's somewhat broken now but that's a separate problem and doesn't affect this one much). throtl_get_tg() incorrectly assumes that q is rcu freed. Also, it doesn't check return value of blk_get_queue(). If the queue is already dead, it ends up doing an extra put. Drop them. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: pass around REQ_* flags instead of broken down booleans during ↵Tejun Heo1-19/+17
request alloc/free blk_alloc_request() and freed_request() take different combinations of REQ_* @flags, @priv and @is_sync when @flags is superset of the latter two. Make them take @flags only. This cleans up the code a bit and will ease updating allocation related REQ_* flags. This patch doesn't introduce any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: move blk_throtl prototypes to block/blk.hTejun Heo2-1/+15
blk_throtl interface is block internal and there's no reason to have them in linux/blkdev.h. Move them to block/blk.h. This patch doesn't introduce any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: fix genhd refcounting in blkio_policy_parse_and_set()Tejun Heo1-33/+23
blkio_policy_parse_and_set() calls blkio_check_dev_num() to check whether the given dev_t is valid. blkio_check_dev_num() uses get_gendisk() for verification but never puts the returned genhd leaking the reference. This patch collapses blkio_check_dev_num() into its caller and updates it such that the genhd is put before returning. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19block: make gendisk hold a reference to its queueTejun Heo1-0/+8
The following command sequence triggers an oops. # mount /dev/sdb1 /mnt # echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete # umount /mnt general protection fault: 0000 [#1] PREEMPT SMP CPU 2 Modules linked in: Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs RIP: 0010:[<ffffffff810d0879>] [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60 ... Call Trace: [<ffffffff810d2845>] lock_acquire+0x95/0x140 [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50 [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70 [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0 [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0 [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0 [<ffffffff811c40df>] blkdev_put+0x5f/0x190 [<ffffffff8118f18d>] kill_block_super+0x4d/0x80 [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70 [<ffffffff8119003a>] deactivate_super+0x4a/0x70 [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130 [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0 [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b This is because bdev holds on to disk but disk doesn't pin the associated queue. If a SCSI device is removed while the device is still open, the sdev puts the base reference to the queue on release. When the bdev is finally released, the associated queue is already gone along with the bdi and bdev_inode_switch_bdi() ends up dereferencing already freed bdi. Even if it were not for this bug, disk not holding onto the associated queue is very unusual and error-prone. Fix it by making add_disk() take an extra reference to its queue and put it on disk_release() and ensuring that disk and its fops owner are put in that order after all accesses to the disk and queue are complete. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe12-54/+413
Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-28block: Free queue resources at blk_release_queue()Hannes Reinecke2-7/+11
A kernel crash is observed when a mounted ext3/ext4 filesystem is physically removed. The problem is that blk_cleanup_queue() frees up some resources eg by calling elevator_exit(), which are not checked for in normal operation. So we should rather move these calls to the destructor function blk_release_queue() as at that point all remaining references are gone. However, in doing so we have to ensure that any externally supplied queue_lock is disconnected as the driver might free up the lock after the call of blk_cleanup_queue(), Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21blk-cgroup: be able to remove the record of unplugged deviceWanlong Gao1-21/+16
The bug is we're not able to remove the device from blkio cgroup's per-device control files if it gets unplugged. To reproduce the bug: # mount -t cgroup -o blkio xxx /cgroup # cd /cgroup # echo "8:0 1000" > blkio.throttle.read_bps_device # unplug the device # cat blkio.throttle.read_bps_device 8:0 1000 # echo "8:0 0" > blkio.throttle.read_bps_device -bash: echo: write error: No such device After patching, the device removal will succeed. Thanks for the comments of Paul, Zefan, and Vivek. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21block/blk-sysfs.c: fix kerneldoc referencesAndrew Morton1-3/+3
The kerneldoc for blk_release_queue() is referring to blk_cleanup_queue(). Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21block: document blk-plugSuresh Jayaraman1-0/+14
Thus spake Andrew Morton: "And I have the usual maintainability whine. If someone comes up to vmscan.c and sees it calling blk_start_plug(), how are they supposed to work out why that call is there? They go look at the blk_start_plug() definition and it is undocumented. I think we can do better than this?" Adapted from the LWN article - http://lwn.net/Articles/438256/ by Jens Axboe and from an earlier attempt by Shaohua Li to document blk-plug. [akpm@linux-foundation.org: grammatical and spelling tweaks] Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-15block: refactor generic_make_requestChristoph Hellwig1-46/+49
Move all the checks performed on a bio into a new helper, and call it as soon as bio is submitted even if it is a re-submission from ->make_request. We explicitly mark the new helper as beeing non-inlined as the stack usage for printing the block device name in the failure case is quite high and this a patch where we have to be extremely conservative about stack usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-14block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_requestTao Ma1-1/+1
In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu to decide whether we should use req->cpu. Actually the user can also select the complete cpu by either setting BIO_CPU_AFFINE or by calling bio_set_completion_cpu. Current solution makes these 2 ways don't work any more. So we'd better just check req->cpu. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-12block: remove support for bio remapping from ->make_requestChristoph Hellwig1-91/+62
There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12block: rename __make_request() to blk_queue_bio()Jens Axboe1-3/+3
Now that it's exported, lets put it in a more sane namespace. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12block: export __make_requestChristoph Hellwig1-3/+2
Avoid the hacks need for request based device mappers currently by simply exporting the symbol instead of trying to get it through the back door. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12elevator: use ELV_NAME_MAX instead of magic number 16 for chosen_elevatorWang Sheng-Hui1-1/+1
We have ELV_NAME_MAX defined to 16, and hence we should use it instead of the magic nubmer 16 for elevator's name string. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-29[SCSI] genhd: add a new attribute "alias" in gendiskNao Nishijima1-0/+71
This patch allows the user to set an "alias" of the disk via sysfs interface. This patch only adds a new attribute "alias" in gendisk structure. To show the alias instead of the device name in kernel messages, we need to revise printk messages and use alias_name() in them. Example: (current) printk("disk name is %s\n", disk->disk_name); (new) printk("disk name is %s\n", alias_name(disk)); Users can use alphabets, numbers, '-' and '_' in "alias" attribute. A disk can have an "alias" which length is up to 255 bytes. This attribute is write-once. Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Suggested-by: Jon Masters <jcm@redhat.com> Signed-off-by: Nao Nishijima <nao.nishijima.xt@hitachi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-24block: simplify force plug flush code a little bitShaohua Li1-6/+7
Cleaning up the code a little bit. attempt_plug_merge() traverses the plug list anyway, we can do the request counting there, so stack size is reduced a little bit. The motivation here is I suspect if we should count the requests for each queue (task could handle multiple disks in the meantime), but my test doesn't show it's worthy doing. If somebody proves we should do it, below change will make that more easier. Signed-off-by: Shaohua Li <shli@kernel.org> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24block: change force plug flush call orderShaohua Li1-3/+3
Do blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request at the tail. New request can't be merged to existing requests, but later new requests might be merged with this new one. If blk_flush_plug_list() is done later, the merge doesn't happen. Believe it or not, this fixes a 10% regression running sysbench workload. Signed-off-by: Shaohua Li <shli@kernel.org> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24block: Fix queue_flag update when rq_affinity goes from 2 to 1Eric Seppanen1-4/+6
Commit 5757a6d76cdf added the QUEUE_FLAG_SAME_FORCE flag, but fails to clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE) and the new state is '1' (SAME_COMP). Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Eric Seppanen <eric@purestorage.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23block: add GENHD_FL_NO_PART_SCANTejun Heo2-3/+3
There are cases where suppressing partition scan is useful - e.g. for lo devices and pseudo SATA devices which advertise to be a disk but get upset on partition scan (some port multiplier control devices show such behavior). This patch adds GENHD_FL_NO_PART_SCAN which suppresses partition scan regardless of the number of possible partitions. disk_partitionable() is renamed to disk_part_scan_enabled() as suppressing partition scan doesn't imply the device can't be partitioned using BLKPG_ADD/DEL_PARTITION calls from userland. show_partition() now directly tests disk_max_parts() to maintain backward-compatibility. -v2: Updated to make it clear that only partition scan is suppressed not partitioning itself as suggested by Kay Sievers. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23block: separate priority boosting from REQ_METAChristoph Hellwig1-10/+10
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds10-14/+371
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
2011-08-19Revert "cfq: Remove special treatment for metadata rqs."Jens Axboe1-0/+18
We have a kernel build regression since 3.1-rc1, which is about 10% regression. The kernel source is in an ext3 filesystem. Alex Shi bisect it to commit: commit a07405b7802691d29ab3b23bdc76ee6d006aad0b Author: Justin TerAvest <teravest@google.com> Date: Sun Jul 10 22:09:19 2011 +0200 cfq: Remove special treatment for metadata rqs. Apparently this is caused by lack metadata preemption, where ext3/ext4 do use READ_META. I didn't see a way to fix the issue, so suggest reverting the patch. This reverts commit a07405b7802691d29ab3b23bdc76ee6d006aad0b. Reported-by: Alex Shi<alex.shi@intel.com> Reported-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-15block: fix flush machinery for stacking drivers with differring flush flagsJeff Moyer3-6/+24
Commit ae1b1539622fb46e51b4d13b3f9e5f4c713f86ae, block: reimplement FLUSH/FUA to support merge, introduced a performance regression when running any sort of fsyncing workload using dm-multipath and certain storage (in our case, an HP EVA). The test I ran was fs_mark, and it dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out that dm-multipath always advertised flush+fua support, and passed commands on down the stack, where those flags used to get stripped off. The above commit changed that behavior: static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; while (1) { - while (!list_empty(&q->queue_head)) { + if (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || - (rq->cmd_flags & REQ_FLUSH_SEQ)) - return rq; - rq = blk_do_flush(q, rq); - if (rq) - return rq; + return rq; } Note that previously, a command would come in here, have REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush: struct request *blk_do_flush(struct request_queue *q, struct request *rq) { unsigned int fflags = q->flush_flags; /* may change, cache it */ bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); unsigned skip = 0; ... if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { rq->cmd_flags &= ~REQ_FLUSH; if (!has_fua) rq->cmd_flags &= ~REQ_FUA; return rq; } So, the flush machinery was bypassed in such cases (q->flush_flags == 0 && rq->cmd_flags & (REQ_FLUSH|REQ_FUA)). Now, however, we don't get into the flush machinery at all. Instead, __elv_next_request just hands a request with flush and fua bits set to the scsi_request_fn, even if the underlying request_queue does not support flush or fua. The agreed upon approach is to fix the flush machinery to allow stacking. While this isn't used in practice (since there is only one request-based dm target, and that target will now reflect the flush flags of the underlying device), it does future-proof the solution, and make it function as designed. In order to make this work, I had to add a field to the struct request, inside the flush structure (to store the original req->end_io). Shaohua had suggested overloading the union with rb_node and completion_data, but the completion data is used by device mapper and can also be used by other drivers. So, I didn't see a way around the additional field. I tested this patch on an HP EVA with both ext4 and xfs, and it recovers the lost performance. Comments and other testers, as always, are appreciated. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-11block: improve rq_affinity placementShaohua Li1-3/+13
This patch reverts commit 35ae66e0a09ab70ed(block: Make rq_affinity = 1 work as expected). The purpose is to avoid an unnecessary IPI. Let's take an example. My test box has cpu 0-7, one socket. Say request is added from CPU 1, blk_complete_request() occurs at CPU 7. Without the reverted patch, softirq will be done at CPU 7. With it, an IPI will be directed to CPU 0, and softirq will be done at CPU 0. In this case, doing softirq at CPU 0 and CPU 7 have no difference from cache sharing point view and we can avoid an ipi if doing it in CPU 7. An immediate concern is this is just like QUEUE_FLAG_SAME_FORCE, but actually not. blk_complete_request() is running in interrupt handler, and currently I/O controller doesn't support multiple interrupts (I checked several LSI cards and AHCI), so only one CPU can run blk_complete_request(). This is still quite different as QUEUE_FLAG_SAME_FORCE. Since only one CPU runs softirq, the only difference with below patch is softirq not always runs at the first CPU of a group. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-09allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSHJeff Moyer1-2/+3
blk_insert_flush has the following check: /* * If there's data but flush is not necessary, the request can be * processed directly without going through flush machinery. Queue * for normal execution. */ if ((policy & REQ_FSEQ_DATA) && !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) { list_add_tail(&rq->queuelist, &q->queue_head); return; } However, blk_flush_policy will not return with policy set to only REQ_FSEQ_DATA: static unsigned int blk_flush_policy(unsigned int fflags, struct request *rq) { unsigned int policy = 0; if (fflags & REQ_FLUSH) { if (rq->cmd_flags & REQ_FLUSH) policy |= REQ_FSEQ_PREFLUSH; if (blk_rq_sectors(rq)) policy |= REQ_FSEQ_DATA; if (!(fflags & REQ_FUA) && (rq->cmd_flags & REQ_FUA)) policy |= REQ_FSEQ_POSTFLUSH; } return policy; } Notice that REQ_FSEQ_DATA is only set if REQ_FLUSH is set. Fix this mismatch by moving the setting of REQ_FSEQ_DATA outside of the REQ_FLUSH check. Tejun notes: Hmmm... yes, this can become a correctness issue if (and only if) blk_queue_flush() is called to change q->flush_flags while requests are in-flight; otherwise, requests wouldn't reach the function at all. Also, I think it would be a generally good idea to always set FSEQ_DATA if the request has data. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-05block: Make rq_affinity = 1 work as expectedTao Ma1-5/+3
Commit 5757a6d76c introduced a new rq_affinity = 2 so as to make the request completed in the __make_request cpu. But it makes the old rq_affinity = 1 not work any more. The root cause is that if the 'cpu' and 'req->cpu' is in the same group and cpu != req->cpu, ccpu will be the same as group_cpu, so the completion will be excuted in the 'cpu' not 'group_cpu'. This patch fix problem by simpling removing group_cpu and the codes are more explicit now. If ccpu == cpu, we complete in cpu, otherwise we raise_blk_irq to ccpu. Cc: Christoph Hellwig <hch@infradead.org> Cc: Roland Dreier <roland@purestorage.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Reviewed-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 04:36:32 +0000