summaryrefslogtreecommitdiffstats
path: root/block/partition-generic.c
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24block: merge partition-generic.c and check.cChristoph Hellwig1-509/+0
Merge block/partition-generic.c and block/partitions/check.c into a single block/partitions/core.c as the content is closely related and both files are tiny. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: cleanup how md_autodetect_dev is calledChristoph Hellwig1-7/+4
Add a new include/linux/raid/detect.h header to declare the md_autodetect_dev prototype which can be shared between md and the partition code. Then use IS_BUILTIN to call it instead of the ifdef magic. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: unexport read_dev_sector and put_dev_sectorChristoph Hellwig1-12/+19
read_dev_sector and put_dev_sector are now only used by the partition parsing code. Remove the export for read_dev_sector and merge it into the only caller. Clean the mess up a bit by using goto labels and the SECTOR_SHIFT constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove alloc_part_info and free_part_infoChristoph Hellwig1-2/+4
There isn't any good reason not to simply open code the allocation and freeing of the partition_meta_info structure. Especially as one of the branches in alloc_part_info is entirely dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move sysfs methods shared by disks and partitions to genhd.cChristoph Hellwig1-75/+1
Move the sysfs _show methods that are used both on the full disk and partition nodes to genhd.c instead of hiding them in the partitioning code. Also move the declaration for these methods to block/blk.h so that we don't expose them to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: move disk_name and related helpers out of partition-generic.cChristoph Hellwig1-32/+0
Thes functions aren't really related to partition support, so move them to a more suitable place. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove __bdevnameChristoph Hellwig1-14/+0
There is no good reason for __bdevname to exist. Just open code printing the string in the callers. For three of them the format string can be trivially merged into existing printk statements, and in init/do_mounts.c we can at least do the scnprintf once at the start of the function, and unconditional of CONFIG_BLOCK to make the output for tiny configfs a little more helpful. Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-26block: allow partitions on host aware zone devicesChristoph Hellwig1-4/+22
Host-aware SMR drives can be used with the commands to explicitly manage zone state, but they can also be used as normal disks. In the former case it makes perfect sense to allow partitions on them, in the latter it does not, just like for host managed devices. Add a check to add_partition to allow partitions on host aware devices, but give up any zone management capabilities in that case, which also catches the previously missed case of adding a partition vs just scanning it. Because sd can rescan the attribute at runtime it needs to check if a disk has partitions, for which a new helper is added to genhd.h. Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices") Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-25Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds1-101/+79
Pull disk revalidation updates from Jens Axboe: "This continues the work that Jan Kara started to thoroughly cleanup and consolidate how we handle rescans and revalidations" * tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block: block: move clearing bd_invalidated into check_disk_size_change block: remove (__)blkdev_reread_part as an exported API block: fix bdev_disk_changed for non-partitioned devices block: move rescan_partitions to fs/block_dev.c block: merge invalidate_partitions into rescan_partitions block: refactor rescan_partitions
2019-11-25Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds1-65/+9
Pull zoned block device update from Jens Axboe: "Enhancements and improvements to the zoned device support" * tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block: scsi: sd_zbc: Remove set but not used variable 'buflen' block: rework zone reporting scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer() null_blk: Add zone_nr_conv to features null_blk: clean up report zones null_blk: clean up the block device operations block: Remove partition support for zoned block devices block: Simplify report zones execution block: cleanup the !zoned case in blk_revalidate_disk_zones block: Enhance blk_revalidate_disk_zones()
2019-11-21block: add iostat counters for flush requestsKonstantin Khlebnikov1-2/+5
Requests that triggers flushing volatile writeback cache to disk (barriers) have significant effect to overall performance. Block layer has sophisticated engine for combining several flush requests into one. But there is no statistics for actual flushes executed by disk. Requests which trigger flushes usually are barriers - zero-size writes. This patch adds two iostat counters into /sys/class/block/$dev/stat and /proc/diskstats - count of completed flush requests and their total time. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: fix bdev_disk_changed for non-partitioned devicesChristoph Hellwig1-0/+5
We still have to set the capacity to 0 if invalidating or call revalidate_disk if not even if the disk has no partitions. Fix that by merging rescan_partitions into bdev_disk_changed and just stubbing out blk_add_partitions and blk_drop_partitions for non-partitioned devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: move rescan_partitions to fs/block_dev.cChristoph Hellwig1-35/+2
Large parts of rescan_partitions aren't about partitions, and moving it to block_dev.c will allow for some further cleanups by merging it into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: merge invalidate_partitions into rescan_partitionsChristoph Hellwig1-24/+14
A lot of the logic in invalidate_partitions and rescan_partitions is shared. Merge the two functions to simplify things. There is a small behavior change in that we now send the kevent change notice also if we were not invalidating but no partitions were found, which seems like the right thing to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: refactor rescan_partitionsChristoph Hellwig1-78/+94
Split out a helper that adds one single partition, and another one calling that dealing with the parsed_partitions state. This makes it much more obvious how we clean up all state and start again when using the rescan label. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: Remove partition support for zoned block devicesDamien Le Moal1-65/+9
No known partitioning tool supports zoned block devices, especially the host managed flavor with strong sequential write constraints. Furthermore, there are also no known user nor use cases for partitioned zoned block devices. This patch removes partition device creation for zoned block devices, which allows simplifying the processing of zone commands for zoned block devices. A warning is added if a partition table is found on the device. For report zones operations no zone sector information remapping is necessary anymore, simplifying the code. Of note is that remapping of zone reports for DM targets is still necessary as done by dm_remap_zone_report(). Similarly, remaping of a zone reset bio is not necessary anymore. Testing for the applicability of the zone reset all request also becomes simpler and only needs to check that the number of sectors of the requested zone range is equal to the disk capacity. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22block: fix use-after-free on gendiskYufen Yu1-0/+7
commit 2da78092dda "block: Fix dev_t minor allocation lifetime" specifically moved blk_free_devt(dev->devt) call to part_release() to avoid reallocating device number before the device is fully shutdown. However, it can cause use-after-free on gendisk in get_gendisk(). We use md device as example to show the race scenes: Process1 Worker Process2 md_free blkdev_open del_gendisk add delete_partition_work_fn() to wq __blkdev_get get_gendisk put_disk disk_release kfree(disk) find part from ext_devt_idr get_disk_and_module(disk) cause use after free delete_partition_work_fn put_device(part) part_release remove part from ext_devt_idr Before <devt, hd_struct pointer> is removed from ext_devt_idr by delete_partition_work_fn(), we can find the devt and then access gendisk by hd_struct pointer. But, if we access the gendisk after it have been freed, it can cause in use-after-freeon gendisk in get_gendisk(). We fix this by adding a new helper blk_invalidate_devt() in delete_partition() and del_gendisk(). It replaces hd_struct pointer in idr with value 'NULL', and deletes the entry from idr in part_release() as we do now. Thanks to Jan Kara for providing the solution and more clear comments for the code. Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime") Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: return just one value from part_in_flightMikulas Patocka1-3/+3
The previous patches deleted all the code that needed the second value returned from part_in_flight - now the kernel only uses the first value. Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that it only returns one value. This patch just refactors the code, there's no functional change. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: delete part_round_stats and switch to less precise countingMikulas Patocka1-3/+0
We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: stop passing 'cpu' to all percpu stats methodsMike Snitzer1-3/+2
All of part_stat_* and related methods are used with preempt disabled, so there is no need to pass cpu around to allow of them. Just call smp_processor_id() as needed. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-28block: use rcu_work instead of call_rcu to avoid sleep in softirqYufen Yu1-3/+5
We recently got a stack by syzkaller like this: BUG: sleeping function called from invalid context at mm/slab.h:361 in_atomic(): 1, irqs_disabled(): 0, pid: 6644, name: blkid INFO: lockdep is turned off. CPU: 1 PID: 6644 Comm: blkid Not tainted 4.4.163-514.55.6.9.x86_64+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 0000000000000000 5ba6a6b879e50c00 ffff8801f6b07b10 ffffffff81cb2194 0000000041b58ab3 ffffffff833c7745 ffffffff81cb2080 5ba6a6b879e50c00 0000000000000000 0000000000000001 0000000000000004 0000000000000000 Call Trace: <IRQ> [<ffffffff81cb2194>] __dump_stack lib/dump_stack.c:15 [inline] <IRQ> [<ffffffff81cb2194>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51 [<ffffffff8129a981>] ___might_sleep+0x291/0x490 kernel/sched/core.c:7675 [<ffffffff8129ac33>] __might_sleep+0xb3/0x270 kernel/sched/core.c:7637 [<ffffffff81794c13>] slab_pre_alloc_hook mm/slab.h:361 [inline] [<ffffffff81794c13>] slab_alloc_node mm/slub.c:2610 [inline] [<ffffffff81794c13>] slab_alloc mm/slub.c:2692 [inline] [<ffffffff81794c13>] kmem_cache_alloc_trace+0x2c3/0x5c0 mm/slub.c:2709 [<ffffffff81cbe9a7>] kmalloc include/linux/slab.h:479 [inline] [<ffffffff81cbe9a7>] kzalloc include/linux/slab.h:623 [inline] [<ffffffff81cbe9a7>] kobject_uevent_env+0x2c7/0x1150 lib/kobject_uevent.c:227 [<ffffffff81cbf84f>] kobject_uevent+0x1f/0x30 lib/kobject_uevent.c:374 [<ffffffff81cbb5b9>] kobject_cleanup lib/kobject.c:633 [inline] [<ffffffff81cbb5b9>] kobject_release+0x229/0x440 lib/kobject.c:675 [<ffffffff81cbb0a2>] kref_sub include/linux/kref.h:73 [inline] [<ffffffff81cbb0a2>] kref_put include/linux/kref.h:98 [inline] [<ffffffff81cbb0a2>] kobject_put+0x72/0xd0 lib/kobject.c:692 [<ffffffff8216f095>] put_device+0x25/0x30 drivers/base/core.c:1237 [<ffffffff81c4cc34>] delete_partition_rcu_cb+0x1d4/0x2f0 block/partition-generic.c:232 [<ffffffff813c08bc>] __rcu_reclaim kernel/rcu/rcu.h:118 [inline] [<ffffffff813c08bc>] rcu_do_batch kernel/rcu/tree.c:2705 [inline] [<ffffffff813c08bc>] invoke_rcu_callbacks kernel/rcu/tree.c:2973 [inline] [<ffffffff813c08bc>] __rcu_process_callbacks kernel/rcu/tree.c:2940 [inline] [<ffffffff813c08bc>] rcu_process_callbacks+0x59c/0x1c70 kernel/rcu/tree.c:2957 [<ffffffff8120f509>] __do_softirq+0x299/0xe20 kernel/softirq.c:273 [<ffffffff81210496>] invoke_softirq kernel/softirq.c:350 [inline] [<ffffffff81210496>] irq_exit+0x216/0x2c0 kernel/softirq.c:391 [<ffffffff82c2cd7b>] exiting_irq arch/x86/include/asm/apic.h:652 [inline] [<ffffffff82c2cd7b>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926 [<ffffffff82c2bc25>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:746 <EOI> [<ffffffff814cbf40>] ? audit_kill_trees+0x180/0x180 [<ffffffff8187d2f7>] fd_install+0x57/0x80 fs/file.c:626 [<ffffffff8180989e>] do_sys_open+0x45e/0x550 fs/open.c:1043 [<ffffffff818099c2>] SYSC_open fs/open.c:1055 [inline] [<ffffffff818099c2>] SyS_open+0x32/0x40 fs/open.c:1050 [<ffffffff82c299e1>] entry_SYSCALL_64_fastpath+0x1e/0x9a In softirq context, we call rcu callback function delete_partition_rcu_cb(), which may allocate memory by kzalloc with GFP_KERNEL flag. If the allocation cannot be satisfied, it may sleep. However, That is not allowed in softirq contex. Although we found this problem on linux 4.4, the latest kernel version seems to have this problem as well. And it is very similar to the previous one: https://lkml.org/lkml/2018/7/9/391 Fix it by using RCU workqueue, which allows sleep. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21block: use nanosecond resolution for iostatOmar Sandoval1-3/+3
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche <klaus.kusche@computerix.info> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Track DISCARD statistics and output them in stat and diskstatMichael Callahan1-2/+7
Add tracking of REQ_OP_DISCARD ios to the partition statistics and append them to the various stat files in /sys as well as /proc/diskstats. These are tracked with the same four stats as reads and writes: Number of discard ios completed. Number of discard ios merged Number of discard sectors completed Milliseconds spent on discard requests This is done via adding a new STAT_DISCARD define to genhd.h and then using it to index that stat field for discard requests. tj: Refreshed on top of v4.17 and other previous updates. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Define and use STAT_READ and STAT_WRITEMichael Callahan1-8/+8
Add defines for STAT_READ and STAT_WRITE for indexing the partition stat entries. This clarifies some fs/ code which has hardcoded 1 for STAT_WRITE and will make it easier to extend the stats with additional fields. tj: Refreshed on top of v4.17. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29block: don't print a message when the device went awayChristoph Hellwig1-2/+2
The information about a size change in this case just creates confusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-24block drivers/block: Use octal not symbolic permissionsJoe Perches1-12/+10
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-26blk-mq: fix sysfs inflight counterOmar Sandoval1-4/+6
When the blk-mq inflight implementation was added, /proc/diskstats was converted to use it, but /sys/block/$dev/inflight was not. Fix it by adding another helper to count in-flight requests by data direction. Fixes: f299b7c7a9de ("blk-mq: provide internal in-flight variant") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-01block: display the correct diskname for bioJiufei Xue1-0/+6
bio_devname use __bdevname to display the device name, and can only show the major and minor of the part0, Fix this by using disk_name to display the correct name. Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25block: fix a crash caused by wrong APIShaohua Li1-1/+1
part_stat_show takes a part device not a disk, so we should use part_to_disk. Fixes: d62e26b3ffd2("block: pass in queue to inflight accounting") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24block: remove blk_free_devt in add_partitionweiping zhang1-1/+0
put_device(pdev) will call pdev->type->release finally, and blk_free_devt has been called in part_release(), so remove it. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18genhd: Annotate all part and part_tbl pointer dereferencesBart Van Assche1-3/+12
Annotate gendisk.part_tbl and disk_part_tbl.part dereferences with rcu_dereference_protected(). This patch does not change the behavior of the modified code but ensures that sparse does not complain about disk->part_tbl manipulations nor about part_tbl->part accesses. Additionally, improve documentation of the locking requirements of the modified functions. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09block: make part_in_flight() take an array of two intsJens Axboe1-1/+3
Instead of returning the count that matches the partition, pass in an array of two ints. Index 0 will be filled with the inflight count for the partition in question, and index 1 will filled with the root inflight count, if the partition passed in is not the root. This is in preparation for being able to calculate both in one go. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09block: pass in queue to inflight accountingJens Axboe1-2/+3
No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-05-23block: fix an error code in add_partition()Dan Carpenter1-1/+3
We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-05Merge tag 'libnvdimm-for-4.12' of ↵Linus Torvalds1-15/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has been in multiple -next releases. There were a few late breaking fixes and small features that got added in the last couple days, but the whole set has received a build success notification from the kbuild robot. Change summary: - Region media error reporting: A libnvdimm region device is the parent to one or more namespaces. To date, media errors have been reported via the "badblocks" attribute attached to pmem block devices for namespaces in "raw" or "memory" mode. Given that namespaces can be in "device-dax" or "btt-sector" mode this new interface reports media errors generically, i.e. independent of namespace modes or state. This subsequently allows userspace tooling to craft "ACPI 6.1 Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and submit them via the ioctl path for NVDIMM root bus devices. - Introduce 'struct dax_device' and 'struct dax_operations': Prompted by a request from Linus and feedback from Christoph this allows for dax capable drivers to publish their own custom dax operations. This fixes the broken assumption that all dax operations are related to a persistent memory device, and makes it easier for other architectures and platforms to add customized persistent memory support. - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is available for storage appliance applications to manually trigger memory controllers to drain write-pending buffers that would otherwise be flushed automatically by the platform ADR (asynchronous-DRAM-refresh) mechanism at a power loss event. Support for "locked" DIMMs is included to prevent namespaces from surfacing when the namespace label data area is locked. Finally, fixes for various reported deadlocks and crashes, also tagged for -stable. - ACPI / nfit driver updates: General updates of the nfit driver to add DSM command overrides, ACPI 6.1 health state flags support, DSM payload debug available by default, and various fixes. Acknowledgements that came after the branch was pushed: - commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock": Tested-by: Yi Zhang <yizhan@redhat.com> - commit 23f498448362 "libnvdimm: rework region badblocks clearing" Tested-by: Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits) libnvdimm, pfn: fix 'npfns' vs section alignment libnvdimm: handle locked label storage areas libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED brd: fix uninitialized use of brd->dax_dev block, dax: use correct format string in bdev_dax_supported device-dax: fix sysfs attribute deadlock libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking" libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering libnvdimm: rework region badblocks clearing acpi, nfit: kill ACPI_NFIT_DEBUG libnvdimm: fix clear length of nvdimm_forget_poison() libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify libnvdimm, region: sysfs trigger for nvdimm_flush() libnvdimm: fix phys_addr for nvdimm_clear_poison x86, dax, pmem: remove indirection around memcpy_from_pmem() block: remove block_device_operations ->direct_access() block, dax: convert bdev_dax_supported() to dax_direct_access() filesystem-dax: convert to dax_direct_access() Revert "block: use DAX for partition table reads" ext2, ext4, xfs: retrieve dax_device for iomap operations ...
2017-04-25Revert "block: use DAX for partition table reads"Dan Williams1-15/+2
commit d1a5f2b4d8a1 ("block: use DAX for partition table reads") was part of a stalled effort to allow dax mappings of block devices. Since then the device-dax mechanism has filled the role of dax-mapping static device ranges. Now that we are moving ->direct_access() from a block_device operation to a dax_inode operation we would need block devices to map and carry their own dax_inode reference. Unless / until we decide to revive dax mapping of raw block devices through the dax_inode scheme, there is no need to carry read_dax_sector(). Its removal in turn allows for the removal of bdev_direct_access() and should have been included in commit 223757016837 ("block_dev: remove DAX leftovers"). Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-21block: get rid of blk_integrity_revalidate()Ilya Dryomov1-1/+0
Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.4+, needs backporting Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-12block: Rename blk_queue_zone_size and bdev_zone_sizeDamien Le Moal1-7/+7
All block device data fields and functions returning a number of 512B sectors are by convention named xxx_sectors while names in the form xxx_size are generally used for a number of bytes. The blk_queue_zone_size and bdev_zone_size functions were not following this convention so rename them. No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Collapsed the two patches, they were nonsensically split and broke bisection. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: Check partition alignment on zoned block devicesDamien Le Moal1-0/+65
Both blkdev_report_zones and blkdev_reset_zones can operate on a partition of a zoned block device. However, the first and last zones reported for a partition make sense only if the partition start sector and size are aligned on the device zone size. The same applies for zone reset. Resetting the first or the last zone of a partition straddling zones may impact neighboring partitions. Finally, if a partition start sector is not at the beginning of a sequential zone, it will be impossible to write to the first sectors of the partition on a host-managed device. Avoid all these problems and incoherencies by ignoring partitions that are not zone aligned. Note: Even with CONFIG_BLK_DEV_ZONED disabled, bdev_is_zoned() will report the correct disk zoning type (host-aware, host-managed or none) but bdev_zone_size() will always return 0 for zoned block devices (i.e. the zone size is unknown). So test this as a way to ensure that a zoned block device is being handled as such. As a result, for a host-aware devices, unaligned zone partitions will be accepted with CONFIG_BLK_DEV_ZONED disabled. That is, the disk will be treated as a regular block device (as it should). If zoned block device support is enabled, only aligned partitions will be accepted. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14block/partition-generic.c: Remove a set-but-not-used variableBart Van Assche1-3/+0
A value is assigned to the variable 'info' but that value is never used. Hence remove the variable 'info'. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+10
Pull block fixes from Jens Axboe: "A few fixes for the current series. This contains: - Two fixes for NVMe: One fixes a reset race that can be triggered by repeated insert/removal of the module. The other fixes an issue on some platforms, where we get probe timeouts since legacy interrupts isn't working. This used not to be a problem since we had the worker thread poll for completions, but since that was killed off, it means those poor souls can't successfully probe their NVMe device. Use a proper IRQ check and probe (msi-x -> msi ->legacy), like most other drivers to work around this. Both from Keith. - A loop corruption issue with offset in iters, from Ming Lei. - A fix for not having the partition stat per cpu ref count initialized before sending out the KOBJ_ADD, which could cause user space to access the counter prior to initialization. Also from Ming Lei. - A fix for using the wrong congestion state, from Kaixu Xia" * 'for-linus' of git://git.kernel.dk/linux-block: block: loop: fix filesystem corruption in case of aio/dio NVMe: Always use MSI/MSI-x interrupts NVMe: Fix reset/remove race writeback: fix the wrong congested state variable definition block: partition: initialize percpuref before sending out KOBJ_ADD
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-4/+4
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-29block: partition: initialize percpuref before sending out KOBJ_ADDMing Lei1-3/+10
The initialization of partition's percpu_ref should have been done before sending out KOBJ_ADD uevent, which may cause userspace to read partition table. So the uninitialized percpu_ref may be accessed in data path. This patch fixes this issue reported by Naveen. Reported-by: Naveen Kaje <nkaje@codeaurora.org> Tested-by: Naveen Kaje <nkaje@codeaurora.org> Fixes: 6c71013ecb7e2(block: partition: convert percpu ref) Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-15block: partition: add partition specific uevent callbacks for partition infoSan Mehat1-0/+11
This patch has been carried in the Android tree for quite some time and is one of the few patches required to get a mainline kernel up and running with an exsiting Android userspace. So I wanted to submit it for review and consideration if it should be merged. For partitions, add new uevent parameters 'PARTN' which specifies the partitions index in the table, and 'PARTNAME', which specifies PARTNAME specifices the partition name of a partition device. Android's userspace uses this for creating device node links from the partition name and number, ie: /dev/block/platform/soc/by-name/system or /dev/block/platform/soc/by-num/p1 One can see its usage here: https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355 and https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494 [john.stultz@linaro.org: dropped NPARTS and reworded commit message for context] Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Rom Lemarchand <romlem@google.com> Cc: Android Kernel Team <kernel-team@android.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: <harald@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-30block: use DAX for partition table readsDan Williams1-3/+15
Avoid populating pagecache when the block device is in DAX mode. Otherwise these page cache entries collide with the fsync/msync implementation and break data durability guarantees. Cc: Jan Kara <jack@suse.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-25Return EBUSY from BLKRRPART for mounted whole-dev fsEric Sandeen1-1/+1
Today, blockdev --rereadpt /dev/sda will fail with EBUSY if any partition of sda is mounted (and will fail with EINVAL if pointed at a partition). But it will pass if the entire block device is formatted with a filesystem and mounted. I don't think this makes sense; partitioning should surely not ever change out from under a mounted device. So check for bdev->bd_super, and fail that with -EBUSY as well. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: Inline blk_integrity in struct gendiskMartin K. Petersen1-0/+1
Up until now the_integrity profile has been dynamically allocated and attached to struct gendisk after the disk has been made active. This causes problems because NVMe devices need to register the profile prior to the partition table being read due to a mandatory metadata buffer requirement. In addition, DM goes through hoops to deal with preallocating, but not initializing integrity profiles. Since the integrity profile is small (4 bytes + a pointer), Christoph suggested moving it to struct gendisk proper. This requires several changes: - Moving the blk_integrity definition to genhd.h. - Inlining blk_integrity in struct gendisk. - Removing the dynamic allocation code. - Adding helper functions which allow gendisk to set up and tear down the integrity sysfs dir when a disk is added/deleted. - Adding a blk_integrity_revalidate() callback for updating the stable pages bdi setting. - The calls that depend on whether a device has an integrity profile or not now key off of the bi->profile pointer. - Simplifying the integrity support routines in DM (Mike Snitzer). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: partition: convert percpu refMing Lei1-4/+5
Percpu refcount is the perfect match for partition's case, and the conversion is quite straight. With the convertion, one pair of atomic inc/dec can be saved for accounting block I/O, which is run in hot path of block I/O. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: partition: introduce hd_free_part()Ming Lei1-2/+1
So the helper can be used in both generic partition case and part0 case. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>