summaryrefslogtreecommitdiffstats
path: root/block/blk.h
AgeCommit message (Collapse)AuthorFilesLines
2018-01-29Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-19/+27
Pull block updates from Jens Axboe: "This is the main pull request for block IO related changes for the 4.16 kernel. Nothing major in this pull request, but a good amount of improvements and fixes all over the map. This contains: - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and Paolo. - Support for SMR zones for deadline and mq-deadline from Damien and Christoph. - Set of fixes for bcache by way of Michael Lyle, including fixes from himself, Kent, Rui, Tang, and Coly. - Series from Matias for lightnvm with fixes from Hans Holmberg, Javier, and Matias. Mostly centered around pblk, and the removing rrpc 1.2 in preparation for supporting 2.0. - A couple of NVMe pull requests from Christoph. Nothing major in here, just fixes and cleanups, and support for command tracing from Johannes. - Support for blk-throttle for tracking reads and writes separately. From Joseph Qi. A few cleanups/fixes also for blk-throttle from Weiping. - Series from Mike Snitzer that enables dm to register its queue more logically, something that's alwways been problematic on dm since it's a stacked device. - Series from Ming cleaning up some of the bio accessor use, in preparation for supporting multipage bvecs. - Various fixes from Ming closing up holes around queue mapping and quiescing. - BSD partition fix from Richard Narron, fixing a problem where we can't mount newer (10/11) FreeBSD partitions. - Series from Tejun reworking blk-mq timeout handling. The previous scheme relied on atomic bits, but it had races where we would think a request had timed out if it to reused at the wrong time. - null_blk now supports faking timeouts, to enable us to better exercise and test that functionality separately. From me. - Kill the separate atomic poll bit in the request struct. After this, we don't use the atomic bits on blk-mq anymore at all. From me. - sgl_alloc/free helpers from Bart. - Heavily contended tag case scalability improvement from me. - Various little fixes and cleanups from Arnd, Bart, Corentin, Douglas, Eryu, Goldwyn, and myself" * 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits) block: remove smart1,2.h nvme: add tracepoint for nvme_complete_rq nvme: add tracepoint for nvme_setup_cmd nvme-pci: introduce RECONNECTING state to mark initializing procedure nvme-rdma: remove redundant boolean for inline_data nvme: don't free uuid pointer before printing it nvme-pci: Suspend queues after deleting them bsg: use pr_debug instead of hand crafted macros blk-mq-debugfs: don't allow write on attributes with seq_operations set nvme-pci: Fix queue double allocations block: Set BIO_TRACE_COMPLETION on new bio during split blk-throttle: use queue_is_rq_based block: Remove kblockd_schedule_delayed_work{,_on}() blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly() lib/scatterlist: Fix chaining support in sgl_alloc_order() blk-throttle: track read and write request individually block: add bdev_read_only() checks to common helpers block: fail op_is_write() requests to read-only partitions blk-throttle: export io_serviced_recursive, io_service_bytes_recursive ...
2018-01-18block: Unexport elv_register_queue() and elv_unregister_queue()Bart Van Assche1-0/+3
These two functions are only called from inside the block layer so unexport them. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-10block: convert REQ_ATOM_COMPLETE to stealing rq->__deadline bitJens Axboe1-10/+9
We only have one atomic flag left. Instead of using an entire unsigned long for that, steal the bottom bit of the deadline field that we already reserved. Remove ->atomic_flags, since it's now unused. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-10block: add accessors for setting/querying request deadlineJens Axboe1-0/+15
We reduce the resolution of request expiry, but since we're already using jiffies for this where resolution depends on the kernel configuration and since the timeout resolution is coarse anyway, that should be fine. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-10block: remove REQ_ATOM_POLL_SLEPTJens Axboe1-2/+0
We don't need this to be an atomic flag, it can be a regular flag. We either end up on the same CPU for the polling, in which case the state is sane, or we did the sleep which would imply the needed barrier to ensure we see the right state. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09blk-mq: remove REQ_ATOM_STARTEDTejun Heo1-1/+0
After the recent updates to use generation number and state based synchronization, we can easily replace REQ_ATOM_STARTED usages by adding an extra state to distinguish completed but not yet freed state. Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with blk_mq_rq_state() tests. REQ_ATOM_STARTED no longer has any users left and is removed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09blk-mq: replace timeout synchronization with a RCU and generation based schemeTejun Heo1-6/+0
Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-05block: drain queue before waiting for q_usage_counter becoming zeroMing Lei1-0/+2
Now we track legacy requests with .q_usage_counter in commit 055f6e18e08f ("block: Make q_usage_counter also track legacy requests"), but that commit never runs and drains legacy queue before waiting for this counter becoming zero, then IO hang is caused in the test of pulling disk during IO. This patch fixes the issue by draining requests before waiting for q_usage_counter becoming zero, both Mauricio and chenxiang reported this issue, and observed that it can be fixed by this patch. Link: https://marc.info/?l=linux-block&m=151192424731797&w=2 Fixes: 055f6e18e08f("block: Make q_usage_counter also track legacy requests") Cc: Wen Xiong <wenxiong@us.ibm.com> Tested-by: "chenxiang (M)" <chenxiang66@hisilicon.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-39/+7
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04blk-mq: document the need to have STARTED and COMPLETED share a byteJens Axboe1-0/+7
For memory ordering guarantees on stores, we need to ensure that these two bits share the same byte of storage in the unsigned long. Add a comment as to why, and a BUILD_BUG_ON() to ensure that we don't violate this requirement. Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-03block: move __elv_next_request to blk-core.cChristoph Hellwig1-39/+0
No need to have this helper inline in a header. Also drop the __ prefix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-29block: Make blk_dequeue_request() staticDamien Le Moal1-1/+0
The only caller of this function is blk_start_request() in the same file. Fix blk_start_request() description accordingly. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: add a __disk_get_part helperChristoph Hellwig1-0/+2
This helper allows looking up a partion under RCU protection without grabbing a reference to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-03bio-integrity: stop abusing bi_end_ioChristoph Hellwig1-0/+11
And instead call directly into the integrity code from bio_end_io. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27block: move bounce declarations to block/blk.hChristoph Hellwig1-0/+13
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20block: Document what queue type each function is intended forBart Van Assche1-0/+2
Some functions in block/blk-core.c must only be used on blk-sq queues while others are safe to use against any queue type. Document which functions are intended for blk-sq queues and issue a warning if the blk-sq API is misused. This does not only help block driver authors but will also make it easier to remove the blk-sq code once that code is declared obsolete. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-01block: Avoid that blk_exit_rl() triggers a use-after-freeBart Van Assche1-1/+1
Since the introduction of .init_rq_fn() and .exit_rq_fn() it is essential that the memory allocated for struct request_queue stays around until all blk_exit_rl() calls have finished. Hence make blk_init_rl() take a reference on struct request_queue. This patch fixes the following crash: general protection fault: 0000 [#2] SMP CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff88013a108040 task.stack: ffffc9000071c000 RIP: 0010:free_request_size+0x1a/0x30 RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003 RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418 RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009 R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8 R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0 Call Trace: mempool_destroy.part.10+0x21/0x40 mempool_destroy+0xe/0x10 blk_exit_rl+0x12/0x20 blkg_free+0x4d/0xa0 __blkg_release_rcu+0x59/0x170 rcu_process_callbacks+0x260/0x4e0 __do_softirq+0x116/0x250 smpboot_thread_fn+0x123/0x1e0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 Fixes: commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19block: Export blk_init_request_from_bio()Bart Van Assche1-1/+0
Export this function such that it becomes available to block drivers. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matias Bjørling <m@bjorling.me> Cc: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19block: make __blk_end_bidi_request privateChristoph Hellwig1-2/+0
blk_insert_flush should be using __blk_end_request to start with. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28blk-throttle: add a mechanism to estimate IO latencyShaohua Li1-0/+2
User configures latency target, but the latency threshold for each request size isn't fixed. For a SSD, the IO latency highly depends on request size. To calculate latency threshold, we sample some data, eg, average latency for request size 4k, 8k, 16k, 32k .. 1M. The latency threshold of each request size will be the sample latency (I'll call it base latency) plus latency target. For example, the base latency for request size 4k is 80us and user configures latency target 60us. The 4k latency threshold will be 80 + 60 = 140us. To sample data, we calculate the order base 2 of rounded up IO sectors. If the IO size is bigger than 1M, it will be accounted as 1M. Since the calculation does round up, the base latency will be slightly smaller than actual value. Also if there isn't any IO dispatched for a specific IO size, we will use the base latency of smaller IO size for this IO size. But we shouldn't sample data at any time. The base latency is supposed to be latency where disk isn't congested, because we use latency threshold to schedule IOs between cgroups. If disk is congested, the latency is higher, using it for scheduling is meaningless. Hence we only do the sampling when block throttling is in the LOW limit, with assumption disk isn't congested in such state. If the assumption isn't true, eg, low limit is too high, calculated latency threshold will be higher. Hard disk is completely different. Latency depends on spindle seek instead of request size. Currently this feature is SSD only, we probably can use a fixed threshold like 4ms for hard disk though. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28blk-throttle: add a simple idle detectionShaohua Li1-0/+3
A cgroup gets assigned a low limit, but the cgroup could never dispatch enough IO to cross the low limit. In such case, the queue state machine will remain in LIMIT_LOW state and all other cgroups will be throttled according to low limit. This is unfair for other cgroups. We should treat the cgroup idle and upgrade the state machine to lower state. We also have a downgrade logic. If the state machine upgrades because of cgroup idle (real idle), the state machine will downgrade soon as the cgroup is below its low limit. This isn't what we want. A more complicated case is cgroup isn't idle when queue is in LIMIT_LOW. But when queue gets upgraded to lower state, other cgroups could dispatch more IO and this cgroup can't dispatch enough IO, so the cgroup is below its low limit and looks like idle (fake idle). In this case, the queue should downgrade soon. The key to determine if we should do downgrade is to detect if cgroup is truely idle. Unfortunately it's very hard to determine if a cgroup is real idle. This patch uses the 'think time check' idea from CFQ for the purpose. Please note, the idea doesn't work for all workloads. For example, a workload with io depth 8 has disk utilization 100%, hence think time is 0, eg, not idle. But the workload can run higher bandwidth with io depth 16. Compared to io depth 16, the io depth 8 workload is idle. We use the idea to roughly determine if a cgroup is idle. We treat a cgroup idle if its think time is above a threshold (by default 1ms for SSD and 100ms for HD). The idea is think time above the threshold will start to harm performance. HD is much slower so a longer think time is ok. The patch (and the latter patches) uses 'unsigned long' to track time. We convert 'ns' to 'us' with 'ns >> 10'. This is fast but loses precision, should not a big deal. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28blk-throttle: choose a small throtl_slice for SSDShaohua Li1-0/+2
The throtl_slice is 100ms by default. This is a long time for SSD, a lot of IO can run. To make cgroups have smoother throughput, we choose a small value (20ms) for SSD. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28blk-throttle: make throtl_slice tunableShaohua Li1-0/+5
throtl_slice is important for blk-throttling. It's called slice internally but it really is a time window blk-throttling samples data. blk-throttling will make decision based on the samplings. An example is bandwidth measurement. A cgroup's bandwidth is measured in the time interval of throtl_slice. A small throtl_slice meanse cgroups have smoother throughput but burn more CPUs. It has 100ms default value, which is not appropriate for all disks. A fast SSD can dispatch a lot of IOs in 100ms. This patch makes it tunable. Since throtl_slice isn't a time slice, the sysfs name 'throttle_sample_time' reflects its character better. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08block: optionally merge discontiguous discard bios into a single requestChristoph Hellwig1-0/+2
Add a new merge strategy that merges discard bios into a request until the maximum number of discard ranges (or the maximum discard size) is reached from the plug merging code. I/O scheduler merging is not wired up yet but might also be useful, although not for fast devices like NVMe which are the only user for now. Note that for now we don't support limiting the size of each discard range, but if needed that can be added later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08block: enumify ELEVATOR_*_MERGEChristoph Hellwig1-1/+1
Switch these constants to an enum, and make let the compiler ensure that all callers of blk_try_merge and elv_merge handle all potential values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08block: move req_set_nomerge to blk.hChristoph Hellwig1-0/+7
This makes it available outside of blk-merge.c, and inlining such a trivial helper seems pretty useful to start with. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03blk-merge: return the merged requestJens Axboe1-2/+2
When we attempt to merge request-to-request, we return a 0/1 if we ended up merging or not. Change that to return the pointer to the request that we freed. We will use this to move the freeing of that request out of the merge logic, so that callers can drop locks before freeing the request. There should be no functional changes in this patch. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-02-02block: use same block debugfs directory for blk-mq and blktraceOmar Sandoval1-0/+4
When I added the blk-mq debugging information to debugfs, I didn't notice that blktrace also creates a "block" directory in debugfs. Make them use the same dentry, now created in the core block code. Based on a patch from Jens. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31block: introduce blk_rq_is_passthroughChristoph Hellwig1-1/+1
This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-17block: move rq_ioc() to blk.hJens Axboe1-0/+16
We want to use it outside of blk-core.c. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17block: move existing elevator ops to unionJens Axboe1-5/+5
Prep patch for adding MQ ops as well, since doing anon unions with named initializers doesn't work on older compilers. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-11-17blk-mq: implement hybrid poll mode for sync O_DIRECTJens Axboe1-0/+1
This patch enables a hybrid polling mode. Instead of polling after IO submission, we can induce an artificial delay, and then poll after that. For example, if the IO is presumed to complete in 8 usecs from now, we can sleep for 4 usecs, wake up, and then do our polling. This still puts a sleep/wakeup cycle in the IO path, but instead of the wakeup happening after the IO has completed, it'll happen before. With this hybrid scheme, we can achieve big latency reductions while still using the same (or less) amount of CPU. Signed-off-by: Jens Axboe <axboe@fb.com> Tested-By: Stephen Bates <sbates@raithlin.com> Reviewed-By: Stephen Bates <sbates@raithlin.com>
2016-10-28block: split out request-only flags into a new namespaceChristoph Hellwig1-2/+2
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: remove ->map_queueChristoph Hellwig1-8/+3
All drivers use the default, so provide an inline version of it. If we ever need other queue mapping we can add an optional method back, although supporting will also require major changes to the queue setup code. This provides better code generation, and better debugability as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: simplify and export blk_rq_append_bioChristoph Hellwig1-2/+0
The target SCSI passthrough backend is much better served with the low-level blk_rq_append_bio construct then the helpers built on top of it, so export it. Also use the opportunity to remove the pointless request_queue argument and make the code flow a little more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22block: defer timeouts to a workqueueChristoph Hellwig1-1/+1
Timer context is not very useful for drivers to perform any meaningful abort action from. So instead of calling the driver from this useless context defer it to a workqueue as soon as possible. Note that while a delayed_work item would seem the right thing here I didn't dare to use it due to the magic in blk_add_timer that pokes deep into timer internals. But maybe this encourages Tejun to add a sensible API for that to the workqueue API and we'll all be fine in the end :) Contains a major update from Keith Bush: "This patch removes synchronizing the timeout work so that the timer can start a freeze on its own queue. The timer enters the queue, so timer context can only start a freeze, but not wait for frozen." Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-19block: protect rw_page against device teardownDan Williams1-2/+0
Fix use after free crashes like the following: general protection fault: 0000 [#1] SMP Call Trace: [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem] [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem] [<ffffffff8128fd90>] bdev_read_page+0x50/0x60 [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50 [<ffffffff81297657>] mpage_readpages+0x107/0x170 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20 [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310 [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310 [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0 [<ffffffff811c76f6>] filemap_fault+0x396/0x530 [<ffffffff811f816e>] __do_fault+0x4e/0xf0 [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50 Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> [willy: symmetry fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-04Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+22
Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
2015-10-21block: fix plug list flushing for nomerge queuesJeff Moyer1-0/+1
Request queues with merging disabled will not flush the plug list after BLK_MAX_REQUEST_COUNT requests have been queued, since the code relies on blk_attempt_plug_merge to compute the request_count. Fix this by computing the number of queued requests even for nomerge queues. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: blk_flush_integrity() for bio-based driversDan Williams1-0/+8
Since they lack requests to pin the request_queue active, synchronous bio-based drivers may have in-flight integrity work from bio_integrity_endio() that is not flushed by blk_freeze_queue(). Flush that work to prevent races to free the queue and the final usage of the blk_integrity profile. This is temporary unless/until bio-based drivers start to generically take a q_usage_counter reference while a bio is in-flight. Cc: Martin K. Petersen <martin.petersen@oracle.com> [martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case] Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: generic request_queue reference countingDan Williams1-0/+14
Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-10Merge branch 'for-4.3/blkcg' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+0
Pull blk-cg updates from Jens Axboe: "A bit later in the cycle, but this has been in the block tree for a a while. This is basically four patchsets from Tejun, that improve our buffered cgroup writeback. It was dependent on the other cgroup changes, but they went in earlier in this cycle. Series 1 is set of 5 patches that has cgroup writeback updates: - bdi_writeback iteration fix which could lead to some wb's being skipped or repeated during e.g. sync under memory pressure. - Simplification of wb work wait mechanism. - Writeback tracepoints updated to report cgroup. Series 2 is is a set of updates for the CFQ cgroup writeback handling: cfq has always charged all async IOs to the root cgroup. It didn't have much choice as writeback didn't know about cgroups and there was no way to tell who to blame for a given writeback IO. writeback finally grew support for cgroups and now tags each writeback IO with the appropriate cgroup to charge it against. This patchset updates cfq so that it follows the blkcg each bio is tagged with. Async cfq_queues are now shared across cfq_group, which is per-cgroup, instead of per-request_queue cfq_data. This makes all IOs follow the weight based IO resource distribution implemented by cfq. - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff. - Other misc review points addressed, acks added and rebased. Series 3 is the blkcg policy cleanup patches: This patchset contains assorted cleanups for blkcg_policy methods and blk[c]g_policy_data handling. - alloc/free added for blkg_policy_data. exit dropped. - alloc/free added for blkcg_policy_data. - blk-throttle's async percpu allocation is replaced with direct allocation. - all methods now take blk[c]g_policy_data instead of blkcg_gq or blkcg. And finally, series 4 is a set of patches cleaning up the blkcg stats handling: blkcg's stats have always been somwhat of a mess. This patchset tries to improve the situation a bit. - The following patches added to consolidate blkcg entry point and blkg creation. This is in itself is an improvement and helps colllecting common stats on bio issue. - per-blkg stats now accounted on bio issue rather than request completion so that bio based and request based drivers can behave the same way. The issue was spotted by Vivek. - cfq-iosched implements custom recursive stats and blk-throttle implements custom per-cpu stats. This patchset make blkcg core support both by default. - cfq-iosched and blk-throttle keep track of the same stats multiple times. Unify them" * 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits) blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/ blkcg: implement interface for the unified hierarchy blkcg: misc preparations for unified hierarchy interface blkcg: separate out tg_conf_updated() from tg_set_conf() blkcg: move body parsing from blkg_conf_prep() to its callers blkcg: mark existing cftypes as legacy blkcg: rename subsystem name from blkio to io blkcg: refine error codes returned during blkcg configuration blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device() blkcg: reduce stack usage of blkg_rwstat_recursive_sum() blkcg: remove cfqg_stats->sectors blkcg: move io_service_bytes and io_serviced stats into blkcg_gq blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq blkcg: make blkcg_[rw]stat per-cpu blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it blkcg: consolidate blkg creation in blkcg_bio_issue_check() blk-throttle: improve queue bypass handling blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup() blkcg: inline [__]blkg_lookup() ...
2015-08-18blkcg: consolidate blkg creation in blkcg_bio_issue_check()Tejun Heo1-5/+0
blkg (blkcg_gq) currently is created by blkcg policies invoking blkg_lookup_create() which ends up repeating about the same code in different policies. Theoretically, this can avoid the overhead of looking and/or creating blkg's if blkcg is enabled but no policy is in use; however, the cost of blkg lookup / creation is very low especially if only the root blkcg is in use which is highly likely if no blkcg policy is in active use - it boils down to a single very predictable conditional and surrounding RCU protection. This patch consolidates blkg creation to a new function blkcg_bio_issue_check() which is called during bio issue from generic_make_request_checks(). blkcg_bio_issue_check() is now the only function which tries to create missing blkg's. The subsequent policy and request_list operations just perform blkg_lookup() and if missing falls back to the root. * blk_get_rl() no longer tries to create blkg. It uses blkg_lookup() instead of blkg_lookup_create(). * blk_throtl_bio() is now called from blkcg_bio_issue_check() with rcu read locked and blkg already looked up. Both throtl_lookup_tg() and throtl_lookup_create_tg() are dropped. * cfq is similarly updated. cfq_lookup_create_cfqg() is replaced with cfq_lookup_cfqg()which uses blkg_lookup(). This consolidates blkg handling and avoids unnecessary blkg creation retries under memory pressure. In addition, this provides a common bio entry point into blkcg where things like common accounting can be performed. v2: Build fixes for !CONFIG_CFQ_GROUP_IOSCHED and !CONFIG_BLK_DEV_THROTTLING. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-15blk-mq: fix race between timeout and freeing requestMing Lei1-0/+6
Inside timeout handler, blk_mq_tag_to_rq() is called to retrieve the request from one tag. This way is obviously wrong because the request can be freed any time and some fiedds of the request can't be trusted, then kernel oops might be triggered[1]. Currently wrt. blk_mq_tag_to_rq(), the only special case is that the flush request can share same tag with the request cloned from, and the two requests can't be active at the same time, so this patch fixes the above issue by updating tags->rqs[tag] with the active request(either flush rq or the request cloned from) of the tag. Also blk_mq_tag_to_rq() gets much simplified with this patch. Given blk_mq_tag_to_rq() is mainly for drivers and the caller must make sure the request can't be freed, so in bt_for_each() this helper is replaced with tags->rqs[tag]. [1] kernel oops log [ 439.696220] BUG: unable to handle kernel NULL pointer dereference at 0000000000000158^M [ 439.697162] IP: [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.700653] PGD 7ef765067 PUD 7ef764067 PMD 0 ^M [ 439.700653] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 439.700653] Dumping ftrace buffer:^M [ 439.700653] (ftrace buffer empty)^M [ 439.700653] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 439.700653] CPU: 6 PID: 2779 Comm: stress-ng-sigfd Not tainted 4.2.0-rc5-next-20150805+ #265^M [ 439.730500] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 439.730500] task: ffff880605308000 ti: ffff88060530c000 task.ti: ffff88060530c000^M [ 439.730500] RIP: 0010:[<ffffffff812d89ba>] [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.730500] RSP: 0018:ffff880819203da0 EFLAGS: 00010283^M [ 439.730500] RAX: ffff880811b0e000 RBX: ffff8800bb465f00 RCX: 0000000000000002^M [ 439.730500] RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000^M [ 439.730500] RBP: ffff880819203db0 R08: 0000000000000002 R09: 0000000000000000^M [ 439.730500] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000202^M [ 439.730500] R13: ffff880814104800 R14: 0000000000000002 R15: ffff880811a2ea00^M [ 439.730500] FS: 00007f165b3f5740(0000) GS:ffff880819200000(0000) knlGS:0000000000000000^M [ 439.730500] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b^M [ 439.730500] CR2: 0000000000000158 CR3: 00000007ef766000 CR4: 00000000000006e0^M [ 439.730500] Stack:^M [ 439.730500] 0000000000000008 ffff8808114eed90 ffff880819203e00 ffffffff812dc104^M [ 439.755663] ffff880819203e40 ffffffff812d9f5e 0000020000000000 ffff8808114eed80^M [ 439.755663] Call Trace:^M [ 439.755663] <IRQ> ^M [ 439.755663] [<ffffffff812dc104>] bt_for_each+0x6e/0xc8^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812dc1b3>] blk_mq_tag_busy_iter+0x55/0x5e^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff812d8911>] blk_mq_rq_timer+0x5d/0xd4^M [ 439.755663] [<ffffffff810a3e10>] call_timer_fn+0xf7/0x284^M [ 439.755663] [<ffffffff810a3d1e>] ? call_timer_fn+0x5/0x284^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff810a46d6>] run_timer_softirq+0x1ce/0x1f8^M [ 439.755663] [<ffffffff8104c367>] __do_softirq+0x181/0x3a4^M [ 439.755663] [<ffffffff8104c76e>] irq_exit+0x40/0x94^M [ 439.755663] [<ffffffff81031482>] smp_apic_timer_interrupt+0x33/0x3e^M [ 439.755663] [<ffffffff815559a4>] apic_timer_interrupt+0x84/0x90^M [ 439.755663] <EOI> ^M [ 439.755663] [<ffffffff81554350>] ? _raw_spin_unlock_irq+0x32/0x4a^M [ 439.755663] [<ffffffff8106a98b>] finish_task_switch+0xe0/0x163^M [ 439.755663] [<ffffffff8106a94d>] ? finish_task_switch+0xa2/0x163^M [ 439.755663] [<ffffffff81550066>] __schedule+0x469/0x6cd^M [ 439.755663] [<ffffffff8155039b>] schedule+0x82/0x9a^M [ 439.789267] [<ffffffff8119b28b>] signalfd_read+0x186/0x49a^M [ 439.790911] [<ffffffff8106d86a>] ? wake_up_q+0x47/0x47^M [ 439.790911] [<ffffffff811618c2>] __vfs_read+0x28/0x9f^M [ 439.790911] [<ffffffff8117a289>] ? __fget_light+0x4d/0x74^M [ 439.790911] [<ffffffff811620a7>] vfs_read+0x7a/0xc6^M [ 439.790911] [<ffffffff8116292b>] SyS_read+0x49/0x7f^M [ 439.790911] [<ffffffff81554c17>] entry_SYSCALL_64_fastpath+0x12/0x6f^M [ 439.790911] Code: 48 89 e5 e8 a9 b8 e7 ff 5d c3 0f 1f 44 00 00 55 89 f2 48 89 e5 41 54 41 89 f4 53 48 8b 47 60 48 8b 1c d0 48 8b 7b 30 48 8b 53 38 <48> 8b 87 58 01 00 00 48 85 c0 75 09 48 8b 97 88 0c 00 00 eb 10 ^M [ 439.790911] RIP [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.790911] RSP <ffff880819203da0>^M [ 439.790911] CR2: 0000000000000158^M [ 439.790911] ---[ end trace d40af58949325661 ]---^M Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-08blk-mq: make plug work for mutiple disks and queuesShaohua Li1-1/+2
Last patch makes plug work for multiple queue case. However it only works for single disk case, because it assumes only one request in the plug list. If a task is accessing multiple disks, eg MD/DM, the assumption is wrong. Let blk_attempt_plug_merge() record request from the same queue. V2: use NULL parameter in !mq case. Fix a bug. Add comments in blk_attempt_plug_merge to make it less (hopefully) confusion. Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: move PM request support to IDEChristoph Hellwig1-2/+0
This removes the request types and hacks from the block code and into the old IDE driver. There is a small amunt of code duplication due to this, but it's not too bad. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25blk-mq: support per-distpatch_queue flush machineryMing Lei1-3/+13
This patch supports to run one single flush machinery for each blk-mq dispatch queue, so that: - current init_request and exit_request callbacks can cover flush request too, then the buggy copying way of initializing flush request's pdu can be fixed - flushing performance gets improved in case of multi hw-queue In fio sync write test over virtio-blk(4 hw queues, ioengine=sync, iodepth=64, numjobs=4, bs=4K), it is observed that througput gets increased a lot over my test environment: - throughput: +70% in case of virtio-blk over null_blk - throughput: +30% in case of virtio-blk over SSD image The multi virtqueue feature isn't merged to QEMU yet, and patches for the feature can be found in below tree: git://kernel.ubuntu.com/ming/qemu.git v2.1.0-mq.4 And simply passing 'num_queues=4 vectors=5' should be enough to enable multi queue(quad queue) feature for QEMU virtio-blk. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: introduce 'blk_mq_ctx' parameter to blk_get_flush_queueMing Lei1-2/+2
This patch adds 'blk_mq_ctx' parameter to blk_get_flush_queue(), so that this function can find the corresponding blk_flush_queue bound with current mq context since the flush queue will become per hw-queue. For legacy queue, the parameter can be simply 'NULL'. For multiqueue case, the parameter should be set as the context from which the related request is originated. With this context info, the hw queue and related flush queue can be found easily. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: remove blk_init_flush() and its pairMing Lei1-2/+2
Now mission of the two helpers is over, and just call blk_alloc_flush_queue() and blk_free_flush_queue() directly. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>