summaryrefslogtreecommitdiffstats
path: root/block/blk-zoned.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-07blk-zoned: Remove the definition of blk_zone_start()Bart Van Assche1-8/+0
Commit e76239a3748c ("block: add a report_zones method") removed the last blk_zone_start() call. Hence also remove the definition of this function. Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406200820.15180-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-11block: Discard page cache of zone reset target rangeShin'ichiro Kawasaki1-2/+36
When zone reset ioctl and data read race for a same zone on zoned block devices, the data read leaves stale page cache even though the zone reset ioctl zero clears all the zone data on the device. To avoid non-zero data read from the stale page cache after zone reset, discard page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce the helper function blkdev_truncate_zone_range() to discard the page cache. Ensure the page cache discarded by calling the helper function before and after zone reset in same manner as fallocate does. This patch can be applied back to the stable kernel version v5.10.y. Rework is needed for older stable kernels. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Cc: <stable@vger.kernel.org> # 5.10+ Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-10block: Fix REQ_OP_ZONE_RESET_ALL handlingDamien Le Moal1-1/+1
Similarly to a single zone reset operation (REQ_OP_ZONE_RESET), execute REQ_OP_ZONE_RESET_ALL operations with REQ_SYNC set. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10block: introduce blk_queue_clear_zone_settings()Damien Le Moal1-0/+17
Introduce the internal function blk_queue_clear_zone_settings() to cleanup all limits and resources related to zoned block devices. This new function is called from blk_queue_set_zoned() when a disk zoned model is set to BLK_ZONED_NONE. This particular case can happens when a partition is created on a host-aware scsi disk. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07block: Improve blk_revalidate_disk_zones() checksDamien Le Moal1-1/+15
Improves the checks on the zones of a zoned block device done in blk_revalidate_disk_zones() by making sure that the device report_zones method did report at least one zone and that the zones reported exactly cover the entire disk capacity, that is, that there are no missing zones at the end of the disk sector range. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-03block: don't do revalidate zones on invalid devicesJohannes Thumshirn1-0/+3
When we loose a device for whatever reason while (re)scanning zones, we trip over a NULL pointer in blk_revalidate_zone_cb, like in the following log: sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB) sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6 sda: failed to revalidate zones sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B) sda: detected capacity change from 14000519643136 to 0 ================================================================== BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550 Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58 CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x7d/0xb0 ? blk_revalidate_zone_cb+0x1b7/0x550 kasan_report.cold+0x5/0x37 ? blk_revalidate_zone_cb+0x1b7/0x550 check_memory_region+0x145/0x1a0 blk_revalidate_zone_cb+0x1b7/0x550 sd_zbc_parse_report+0x1f1/0x370 ? blk_req_zone_write_trylock+0x200/0x200 ? sectors_to_logical+0x60/0x60 ? blk_req_zone_write_trylock+0x200/0x200 ? blk_req_zone_write_trylock+0x200/0x200 sd_zbc_report_zones+0x3c4/0x5e0 ? sd_dif_config_host+0x500/0x500 blk_revalidate_disk_zones+0x231/0x44d ? _raw_write_lock_irqsave+0xb0/0xb0 ? blk_queue_free_zone_bitmaps+0xd0/0xd0 sd_zbc_read_zones+0x8cf/0x11a0 sd_revalidate_disk+0x305c/0x64e0 ? __device_add_disk+0x776/0xf20 ? read_capacity_16.part.0+0x1080/0x1080 ? blk_alloc_devt+0x250/0x250 ? create_object.isra.0+0x595/0xa20 ? kasan_unpoison_shadow+0x33/0x40 sd_probe+0x8dc/0xcd2 really_probe+0x20e/0xaf0 __driver_attach_async_helper+0x249/0x2d0 async_run_entry_fn+0xbe/0x560 process_one_work+0x764/0x1290 ? _raw_read_unlock_irqrestore+0x30/0x30 worker_thread+0x598/0x12f0 ? __kthread_parkme+0xc6/0x1b0 ? schedule+0xed/0x2c0 ? process_one_work+0x1290/0x1290 kthread+0x36b/0x440 ? kthread_create_worker_on_cpu+0xa0/0xa0 ret_from_fork+0x22/0x30 ================================================================== When the device is already gone we end up with the following scenario: The device's capacity is 0 and thus the number of zones will be 0 as well. When allocating the bitmap for the conventional zones, we then trip over a NULL pointer. So if we encounter a zoned block device with a 0 capacity, don't dare to revalidate the zones sizes. Fixes: 6c6b35491422 ("block: set the zone size in blk_revalidate_disk_zones atomically") Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08block: add capacity field to zone descriptorsMatias Bjørling1-0/+1
In the zoned storage model, the sectors within a zone are typically all writeable. With the introduction of the Zoned Namespace (ZNS) Command Set in the NVM Express organization, the model was extended to have a specific writeable capacity. Extend the zone descriptor data structure with a zone capacity field to indicate to the user how many sectors in a zone are writeable. Introduce backward compatibility in the zone report ioctl by extending the zone report header data structure with a flags field to indicate if the capacity field is available. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-12block: Modify revalidate zonesDamien Le Moal1-1/+8
Modify the interface of blk_revalidate_disk_zones() to add an optional driver callback function that a driver can use to extend processing done during zone revalidation. The callback, if defined, is executed with the device request queue frozen, after all zones have been inspected. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12block: introduce blk_req_zone_write_trylockJohannes Thumshirn1-0/+14
Introduce blk_req_zone_write_trylock(), which either grabs the write-lock for a sequential zone or returns false, if the zone is already locked. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-30Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+32
Pull block driver updates from Jens Axboe: - floppy driver cleanup series from Willy - NVMe updates and fixes (Various) - null_blk trace improvements (Chaitanya) - bcache fixes (Coly) - md fixes (via Song) - loop block size change optimizations (Martijn) - scnprintf() use (Takashi) * tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits) null_blk: add trace in null_blk_zoned.c null_blk: add tracepoint helpers for zoned mode block: add a zone condition debug helper nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts ...
2020-03-27block: add a zone condition debug helperChaitanya Kulkarni1-0/+32
Add a helper to stringify the zone conditions. We use this helper in the next patch to track zone conditions in tracepoints. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12block, zoned: fix integer overflow with BLKRESETZONE et alAlexey Dobriyan1-1/+1
Check for overflow in addition before checking for end-of-block-device. Steps to reproduce: #define _GNU_SOURCE 1 #include <sys/ioctl.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> typedef unsigned long long __u64; struct blk_zone_range { __u64 sector; __u64 nr_sectors; }; #define BLKRESETZONE _IOW(0x12, 131, struct blk_zone_range) int main(void) { int fd = open("/dev/nullb0", O_RDWR|O_DIRECT); struct blk_zone_range zr = {4096, 0xfffffffffffff000ULL}; ioctl(fd, BLKRESETZONE, &zr); return 0; } BUG: KASAN: null-ptr-deref in submit_bio_wait+0x74/0xe0 Write of size 8 at addr 0000000000000040 by task a.out/1590 CPU: 8 PID: 1590 Comm: a.out Not tainted 5.6.0-rc1-00019-g359c92c02bfa #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 Call Trace: dump_stack+0x76/0xa0 __kasan_report.cold+0x5/0x3e kasan_report+0xe/0x20 submit_bio_wait+0x74/0xe0 blkdev_zone_mgmt+0x26f/0x2a0 blkdev_zone_mgmt_ioctl+0x14b/0x1b0 blkdev_ioctl+0xb28/0xe60 block_ioctl+0x69/0x80 ksys_ioctl+0x3af/0xa50 Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-09block: mark zone-mgmt bios with REQ_SYNCChaitanya Kulkarni1-1/+1
In the current implementation, final zone-mgmt request is issued with submit_bio_wait() which marks the bio REQ_SYNC. This is needed since immediate action is expected for zone-mgmt requests as these are blocking operations. This also bypasses the scheduler in the blk_mq_make_request() and dispatches the request directly into the hw ctx. This patch marks all the chained bios REQ_SYNC so that we can have above-mentioned behavior for non-final bios also. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: set the zone size in blk_revalidate_disk_zones atomicallyChristoph Hellwig1-26/+33
The current zone revalidation code has a major problem in that it doesn't update the zone size and q->nr_zones atomically, leading to a short window where an out of bounds access to the zone arrays is possible. To fix this move the setting of the zone size into the crticial sections blk_revalidate_disk_zones so that it gets updated together with the zone bitmaps and q->nr_zones. This also slightly simplifies the caller as it deducts the zone size from the report_zones. This change also allows to check for a power of two zone size in generic code. Reported-by: Hans Holmberg <hans@owltronix.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: don't handle bio based drivers in blk_revalidate_disk_zonesChristoph Hellwig1-11/+5
bio based drivers only need to update q->nr_zones. Do that manually instead of overloading blk_revalidate_disk_zones to keep that function simpler for the next round of changes that will rely even more on the request based functionality. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: allocate the zone bitmaps lazilyChristoph Hellwig1-33/+32
Allocate the conventional zone bitmap and the sequential zone locking bitmap only when we find a zone of the respective type. This avoids wasting memory on the conventional zone bitmap for devices that only have sequential zones, and will also prepare for other future changes. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: replace seq_zones_bitmap with conv_zones_bitmapChristoph Hellwig1-9/+9
Invert the meaning of seq_zones_bitmap by keeping a bitmap of conventional zones. This allows not having a bitmap for devices that do not have conventional zones. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: simplify blkdev_nr_zonesChristoph Hellwig1-18/+8
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead of the block_device and capacity. This also removes the need for __blkdev_nr_zones as all callers are outside the fast path and can deal with the additional branch. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: remove the empty line at the end of blk-zoned.cChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: rework zone reportingChristoph Hellwig1-156/+97
Avoid the need to allocate a potentially large array of struct blk_zone in the block layer by switching the ->report_zones method interface to a callback model. Now the caller simply supplies a callback that is executed on each reported zone, and private data for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: Remove partition support for zoned block devicesDamien Le Moal1-51/+11
No known partitioning tool supports zoned block devices, especially the host managed flavor with strong sequential write constraints. Furthermore, there are also no known user nor use cases for partitioned zoned block devices. This patch removes partition device creation for zoned block devices, which allows simplifying the processing of zone commands for zoned block devices. A warning is added if a partition table is found on the device. For report zones operations no zone sector information remapping is necessary anymore, simplifying the code. Of note is that remapping of zone reports for DM targets is still necessary as done by dm_remap_zone_report(). Similarly, remaping of a zone reset bio is not necessary anymore. Testing for the applicability of the zone reset all request also becomes simpler and only needs to check that the number of sectors of the requested zone range is equal to the disk capacity. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: Simplify report zones executionDamien Le Moal1-29/+5
All kernel users of blkdev_report_zones() as well as applications use through ioctl(BLKZONEREPORT) expect to potentially get less zone descriptors than requested. As such, the use of the internal report zones command execution loop implemented by blk_report_zones() is not necessary and can even be harmful to performance by causing the execution of inefficient small zones report command to service the reminder of a requested zone array. This patch removes blk_report_zones(), simplifying the code. Also remove a now incorrect comment in dm_blk_report_zones(). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Javier Gonzalez <javier@javigon.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: cleanup the !zoned case in blk_revalidate_disk_zonesChristoph Hellwig1-3/+4
blk_revalidate_disk_zones is never called for non-zoned devices. Just return early and warn instead of trying to handle this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: Enhance blk_revalidate_disk_zones()Damien Le Moal1-2/+60
For ZBC and ZAC zoned devices, the scsi driver revalidation processing implemented by sd_revalidate_disk() includes a call to sd_zbc_read_zones() which executes a full disk zone report used to check that all zones of the disk are the same size. This processing is followed by a call to blk_revalidate_disk_zones(), used to initialize the device request queue zone bitmaps (zone type and zone write lock bitmaps). To do so, blk_revalidate_disk_zones() also executes a full device zone report to obtain zone types. As a result, the entire zoned block device revalidation process includes two full device zone report. By moving the zone size checks into blk_revalidate_disk_zones(), this process can be optimized to a single full device zone report, leading to shorter device scan and revalidation times. This patch implements this optimization, reducing the original full device zone report implemented in sd_zbc_check_zones() to a single, small, report zones command execution to obtain the size of the first zone of the device. Checks whether all zones of the device are the same size as the first zone size are moved to the generic blk_check_zone() function called from blk_revalidate_disk_zones(). This optimization also has the following benefits: 1) fewer memory allocations in the scsi layer during disk revalidation as the potentailly large buffer for zone report execution is not needed. 2) Implement zone checks in a generic manner, reducing the burden on device driver which only need to obtain the zone size and check that this size is a power of 2 number of LBAs. Any new type of zoned block device will benefit from this. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07block: add zone open, close and finish ioctl supportAjay Joshi1-5/+23
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE to allow applications to control the condition of zones on a zoned block device through the execution of the REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07block: add zone open, close and finish operationsAjay Joshi1-14/+21
Zoned block devices (ZBC and ZAC devices) allow an explicit control over the condition (state) of zones. The operations allowed are: * Open a zone: Transition to open condition to indicate that a zone will actively be written * Close a zone: Transition to closed condition to release the drive resources used for writing to a zone * Finish a zone: Transition an open or closed zone to the full condition to prevent write operations To enable this control for in-kernel zoned block device users, define the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH as well as the generic function blkdev_zone_mgmt() for submitting these operations on a range of zones. This results in blkdev_reset_zones() removal and replacement with this new zone magement function. Users of blkdev_reset_zones() (f2fs and dm-zoned) are updated accordingly. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07block: Simplify REQ_OP_ZONE_RESET_ALL handlingDamien Le Moal1-27/+13
There is no need for the function __blkdev_reset_all_zones() as REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones() bio loop with an early break from the loop. This patch removes this function and modifies blkdev_reset_zones(), simplifying the code. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07block: Remove REQ_OP_ZONE_RESET pluggingDamien Le Moal1-4/+0
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests do not have a size and are never sequential due to the zone start sector position required for their execution. As a result, there is no point in using a plug around blkdev_reset_zones() bio issuing loop. This patch removes this unnecessary plugging. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-zoned: implement REQ_OP_ZONE_RESET_ALLChaitanya Kulkarni1-0/+39
This implements REQ_OP_ZONE_RESET_ALL as a special case of the block device zone reset operations where we just simply issue bio with the newly introduced req op. We issue this req op when the number of sectors is equal to the device's partition's number of sectors and device has no partitions. We also add support so that blk_op_str() can print the new reset-all zone operation. This patch also adds a generic make request check for newly introduced REQ_OP_ZONE_RESET_ALL req_opf. We simply return error when queue is zoned and reset-all flag is not set for REQ_OP_ZONE_RESET_ALL. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11block: Limit zone array allocation sizeDamien Le Moal1-16/+20
Limit the size of the struct blk_zone array used in blk_revalidate_disk_zones() to avoid memory allocation failures leading to disk revalidation failure. Also further reduce the likelyhood of such failures by using kvcalloc() (that is vmalloc()) instead of allocating contiguous pages with alloc_pages(). Fixes: 515ce6061312 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation") Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11block: Kill gfp_t argument of blkdev_report_zones()Damien Le Moal1-12/+19
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In preparation of using vmalloc() for large report buffer and zone array allocations used by this function, remove its "gfp_t gfp_mask" argument and rely on the caller context to use memalloc_noio_save/restore() where necessary (block layer zone revalidation and dm-zoned I/O error path). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10block: Fix potential overflow in blk_report_zones()Damien Le Moal1-1/+1
For large values of the number of zones reported and/or large zone sizes, the sector increment calculated with blk_queue_zone_sectors(q) * n in blk_report_zones() loop can overflow the unsigned int type used for the calculation as both "n" and blk_queue_zone_sectors() value are unsigned int. E.g. for a device with 256 MB zones (524288 sectors), overflow happens with 8192 or more zones reported. Changing the return type of blk_queue_zone_sectors() to sector_t, fixes this problem and avoids overflow problem for all other callers of this helper too. The same change is also applied to the bdev_zone_sectors() helper. Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig1-0/+1
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-11block: Fix null_blk_zoned creation failure with small number of zonesShin'ichiro Kawasaki1-1/+1
null_blk_zoned creation fails if the number of zones specified is equal to or is smaller than 64 due to a memory allocation failure in blk_alloc_zones(). With such a small number of zones, the required memory size for all zones descriptors fits in a single page, and the page order for alloc_pages_node() is zero. Allow this value in blk_alloc_zones() for the allocation to succeed. Fixes: bf5054569653 "block: Introduce blk_revalidate_disk_zones()" Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: add queue_is_mq() helperJens Axboe1-1/+1
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce blk_revalidate_disk_zones()Damien Le Moal1-0/+136
Drivers exposing zoned block devices have to initialize and maintain correctness (i.e. revalidate) of the device zone bitmaps attached to the device request queue (seq_zones_bitmap and seq_zones_wlock). To simplify coding this, introduce a generic helper function blk_revalidate_disk_zones() suitable for most (and likely all) cases. This new function always update the seq_zones_bitmap and seq_zones_wlock bitmaps as well as the queue nr_zones field when called for a disk using a request based queue. For a disk using a BIO based queue, only the number of zones is updated since these queues do not have schedulers and so do not need the zone bitmaps. With this change, the zone bitmap initialization code in sd_zbc.c can be replaced with a call to this function in sd_zbc_read_zones(), which is called from the disk revalidate block operation method. A call to blk_revalidate_disk_zones() is also added to the null_blk driver for devices created with the zoned mode enabled. Finally, to ensure that zoned devices created with dm-linear or dm-flakey expose the correct number of zones through sysfs, a call to blk_revalidate_disk_zones() is added to dm_table_set_restrictions(). The zone bitmaps allocated and initialized with blk_revalidate_disk_zones() are freed automatically from __blk_release_queue() using the block internal function blk_queue_free_zone_bitmaps(). Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: add a report_zones methodChristoph Hellwig1-113/+51
Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Improve zone reset executionDamien Le Moal1-13/+16
There is no need to synchronously execute all REQ_OP_ZONE_RESET BIOs necessary to reset a range of zones. Similarly to what is done for discard BIOs in blk-lib.c, all zone reset BIOs can be chained and executed asynchronously and a synchronous call done only for the last BIO of the chain. Modify blkdev_reset_zones() to operate similarly to blkdev_issue_discard() using the next_bio() helper for chaining BIOs. To avoid code duplication of that function in blk_zoned.c, rename next_bio() into blk_next_bio() and declare it as a block internal function in blk.h. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Limit allocation of zone descriptors for report zonesDamien Le Moal1-2/+1
There is no point in allocating more zone descriptors than the number of zones a block device has for doing a zone report. Avoid doing that in blkdev_report_zones_ioctl() by limiting the number of zone decriptors allocated internally to process the user request. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce blkdev_nr_zones() helperDamien Le Moal1-0/+27
Introduce the blkdev_nr_zones() helper function to get the total number of zones of a zoned block device. This number is always 0 for a regular block device (q->limits.zoned == BLK_ZONED_NONE case). Replace hard-coded number of zones calculation in dmz_get_zoned_device() with a call to this helper. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block: Remove a superfluous cast from blkdev_report_zones()Bart Van Assche1-1/+1
No cast is necessary when assigning a non-void pointer to a void pointer. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-12treewide: kvmalloc() -> kvmalloc_array()Kees Cook1-2/+2
The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-22blkdev_report_zones_ioctl(): Use vmalloc() to allocate large buffersBart Van Assche1-2/+6
Avoid that complaints similar to the following appear in the kernel log if the number of zones is sufficiently large: fio: page allocation failure: order:9, mode:0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) Call Trace: dump_stack+0x63/0x88 warn_alloc+0xf5/0x190 __alloc_pages_slowpath+0x8f0/0xb0d __alloc_pages_nodemask+0x242/0x260 alloc_pages_current+0x6a/0xb0 kmalloc_order+0x18/0x50 kmalloc_order_trace+0x26/0xb0 __kmalloc+0x20e/0x220 blkdev_report_zones_ioctl+0xa5/0x1a0 blkdev_ioctl+0x1ba/0x930 block_ioctl+0x41/0x50 do_vfs_ioctl+0xaa/0x610 SyS_ioctl+0x79/0x90 do_syscall_64+0x79/0x1b0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Shaun Tancheff <shaun.tancheff@seagate.com> Cc: Damien Le Moal <damien.lemoal@hgst.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-09block: Suppress kernel-doc warnings triggered by blk-zoned.cBart Van Assche1-2/+2
Avoid that building with W=1 causes the kernel-doc tool to complain about undocumented function arguments for the blk-zoned.c source file. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-05block: introduce zoned block devices zone write lockingChristoph Hellwig1-0/+42
Components relying only on the request_queue structure for accessing block devices (e.g. I/O schedulers) have a limited knowledged of the device characteristics. In particular, the device capacity cannot be easily discovered, which for a zoned block device also result in the inability to easily know the number of zones of the device (the zone size is indicated by the chunk_sectors field of the queue limits). Introduce the nr_zones field to the request_queue structure to simplify access to this information. Also, add the bitmap seq_zone_bitmap which indicates which zones of the device are sequential zones (write preferred or write required) and the bitmap seq_zones_wlock which indicates if a zone is write locked, that is, if a write request targeting a zone was dispatched to the device. These fields are initialized by the low level block device driver (sd.c for ZBC/ZAC disks). They are not initialized by stacking drivers (device mappers) handling zoned block devices (e.g. dm-linear). Using this, I/O schedulers can introduce zone write locking to control request dispatching to a zoned block device and avoid write request reordering by limiting to at most a single write request per zone outside of the scheduler at any time. Based on previous patches from Damien Le Moal. Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Fixed comments and identation in blkdev.h * Changed helper functions * Fixed this commit message Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-2/+2
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-01-12block: Rename blk_queue_zone_size and bdev_zone_sizeDamien Le Moal1-2/+2
All block device data fields and functions returning a number of 512B sectors are by convention named xxx_sectors while names in the form xxx_size are generally used for a number of bytes. The blk_queue_zone_size and bdev_zone_size functions were not following this convention so rename them. No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Collapsed the two patches, they were nonsensically split and broke bisection. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-24block: zoned: fix harmless maybe-uninitialized warningArnd Bergmann1-4/+2
The blkdev_report_zones produces a harmless warning when -Wmaybe-uninitialized is set, after gcc gets a little confused about the multiple 'goto' here: block/blk-zoned.c: In function 'blkdev_report_zones': block/blk-zoned.c:188:13: error: 'nz' may be used uninitialized in this function [-Werror=maybe-uninitialized] Moving the assignment to nr_zones makes this a little simpler while also avoiding the warning reliably. I'm removing the extraneous initialization of 'int ret' in the same patch, as that is semi-related and could cause an uninitialized use of that variable to not produce a warning. Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18blk-zoned: implement ioctlsShaun Tancheff1-0/+93
Adds the new BLKREPORTZONE and BLKRESETZONE ioctls for respectively obtaining the zone configuration of a zoned block device and resetting the write pointer of sequential zones of a zoned block device. The BLKREPORTZONE ioctl maps directly to a single call of the function blkdev_report_zones. The zone information result is passed as an array of struct blk_zone identical to the structure used internally for processing the REQ_OP_ZONE_REPORT operation. The BLKRESETZONE ioctl maps to a single call of the blkdev_reset_zones function. Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 21:06:35 +0000