summaryrefslogtreecommitdiffstats
path: root/block/blk-mq-tag.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-6/+1
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-01blk-mq-tag: kill unused tag enumsJens Axboe1-6/+1
We don't have any notion of a tagging cache anymore, and haven't for a long time. Kill off the unused enums. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-03-02blk-mq-sched: Allocate sched reserved tags as specified in the original ↵Sagi Grimberg1-0/+6
queue tagset Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Modified by me to also check at driver tag allocation time if the original request was reserved, so we can be sure to allocate a properly reserved tag at that point in time, too. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: move tags and sched_tags info from sysfs to debugfsOmar Sandoval1-1/+0
These are very tied to the blk-mq tag implementation, so exposing them to sysfs isn't a great idea. Move the debugging information to debugfs and add basic entries for the number of tags and the number of reserved tags to sysfs. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-20blk-mq: allow resize of scheduler requestsJens Axboe1-1/+3
Add support for growing the tags associated with a hardware queue, for the scheduler tags. Currently we only support resizing within the limits of the original depth, change that so we can grow it as well by allocating and replacing the existing scheduler tag set. This is similar to how we could increase the software queue depth with the legacy IO stack and schedulers. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17blk-mq: split tag ->rqs[] into twoJens Axboe1-0/+1
This is in preparation for having two sets of tags available. For that we need a static index, and a dynamically assignable one. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17blk-mq-tag: cleanup the normal/reserved tag allocationJens Axboe1-2/+2
This is in preparation for having another tag set available. Cleanup the parameters, and allow passing in of tags for blk_mq_put_tag(). Signed-off-by: Jens Axboe <axboe@fb.com> [hch: even more cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-10-09Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+0
Pull blk-mq irq/cpu mapping updates from Jens Axboe: "This is the block-irq topic branch for 4.9-rc. It's mostly from Christoph, and it allows drivers to specify their own mappings, and more importantly, to share the blk-mq mappings with the IRQ affinity mappings. It's a good step towards making this work better out of the box" * 'for-4.9/block-irq' of git://git.kernel.dk/linux-block: blk_mq: linux/blk-mq.h does not include all the headers it depends on blk-mq: kill unused blk_mq_create_mq_map() blk-mq: get rid of the cpumask in struct blk_mq_tags nvme: remove the post_scan callout nvme: switch to use pci_alloc_irq_vectors blk-mq: provide a default queue mapping for PCI device blk-mq: allow the driver to pass in a queue mapping blk-mq: remove ->map_queue blk-mq: only allocate a single mq_map per tag_set blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-09-17sbitmap: randomize initial alloc_hint valuesOmar Sandoval1-1/+0
In order to get good cache behavior from a sbitmap, we want each CPU to stick to its own cacheline(s) as much as possible. This might happen naturally as the bitmap gets filled up and the alloc_hint values spread out, but we really want this behavior from the start. blk-mq apparently intended to do this, but the code to do this was never wired up. Get rid of the dead code and make it part of the sbitmap library. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17sbitmap: push alloc policy into sbitmap_queueOmar Sandoval1-1/+0
Again, there's no point in passing this in every time. Make it part of struct sbitmap_queue and clean up the API. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17sbitmap: push per-cpu last_tag into sbitmap_queueOmar Sandoval1-1/+2
Allocating your own per-cpu allocation hint separately makes for an awkward API. Instead, allocate the per-cpu hint as part of the struct sbitmap_queue. There's no point for a struct sbitmap_queue without the cache, but you can still use a bare struct sbitmap. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17blk-mq: abstract tag allocation out into sbitmap libraryOmar Sandoval1-27/+10
This is a generally useful data structure, so make it available to anyone else who might want to use it. It's also a nice cleanup separating the allocation logic from the rest of the tag handling logic. The code is behind a new Kconfig option, CONFIG_SBITMAP, which is only selected by CONFIG_BLOCK for now. This should be a complete noop functionality-wise. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: get rid of the cpumask in struct blk_mq_tagsChristoph Hellwig1-1/+0
Unused now that NVMe sets up irq affinity before calling into blk-mq. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-01blk-mq: factor out a helper to iterate all tags for a request_queueChristoph Hellwig1-0/+2
And replace the blk_mq_tag_busy_iter with it - the driver use has been replaced with a new helper a while ago, and internal to the block we only need the new version. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-15blk-mq: fix race between timeout and freeing requestMing Lei1-0/+12
Inside timeout handler, blk_mq_tag_to_rq() is called to retrieve the request from one tag. This way is obviously wrong because the request can be freed any time and some fiedds of the request can't be trusted, then kernel oops might be triggered[1]. Currently wrt. blk_mq_tag_to_rq(), the only special case is that the flush request can share same tag with the request cloned from, and the two requests can't be active at the same time, so this patch fixes the above issue by updating tags->rqs[tag] with the active request(either flush rq or the request cloned from) of the tag. Also blk_mq_tag_to_rq() gets much simplified with this patch. Given blk_mq_tag_to_rq() is mainly for drivers and the caller must make sure the request can't be freed, so in bt_for_each() this helper is replaced with tags->rqs[tag]. [1] kernel oops log [ 439.696220] BUG: unable to handle kernel NULL pointer dereference at 0000000000000158^M [ 439.697162] IP: [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.700653] PGD 7ef765067 PUD 7ef764067 PMD 0 ^M [ 439.700653] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 439.700653] Dumping ftrace buffer:^M [ 439.700653] (ftrace buffer empty)^M [ 439.700653] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 439.700653] CPU: 6 PID: 2779 Comm: stress-ng-sigfd Not tainted 4.2.0-rc5-next-20150805+ #265^M [ 439.730500] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 439.730500] task: ffff880605308000 ti: ffff88060530c000 task.ti: ffff88060530c000^M [ 439.730500] RIP: 0010:[<ffffffff812d89ba>] [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.730500] RSP: 0018:ffff880819203da0 EFLAGS: 00010283^M [ 439.730500] RAX: ffff880811b0e000 RBX: ffff8800bb465f00 RCX: 0000000000000002^M [ 439.730500] RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000^M [ 439.730500] RBP: ffff880819203db0 R08: 0000000000000002 R09: 0000000000000000^M [ 439.730500] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000202^M [ 439.730500] R13: ffff880814104800 R14: 0000000000000002 R15: ffff880811a2ea00^M [ 439.730500] FS: 00007f165b3f5740(0000) GS:ffff880819200000(0000) knlGS:0000000000000000^M [ 439.730500] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b^M [ 439.730500] CR2: 0000000000000158 CR3: 00000007ef766000 CR4: 00000000000006e0^M [ 439.730500] Stack:^M [ 439.730500] 0000000000000008 ffff8808114eed90 ffff880819203e00 ffffffff812dc104^M [ 439.755663] ffff880819203e40 ffffffff812d9f5e 0000020000000000 ffff8808114eed80^M [ 439.755663] Call Trace:^M [ 439.755663] <IRQ> ^M [ 439.755663] [<ffffffff812dc104>] bt_for_each+0x6e/0xc8^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812dc1b3>] blk_mq_tag_busy_iter+0x55/0x5e^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff812d8911>] blk_mq_rq_timer+0x5d/0xd4^M [ 439.755663] [<ffffffff810a3e10>] call_timer_fn+0xf7/0x284^M [ 439.755663] [<ffffffff810a3d1e>] ? call_timer_fn+0x5/0x284^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff810a46d6>] run_timer_softirq+0x1ce/0x1f8^M [ 439.755663] [<ffffffff8104c367>] __do_softirq+0x181/0x3a4^M [ 439.755663] [<ffffffff8104c76e>] irq_exit+0x40/0x94^M [ 439.755663] [<ffffffff81031482>] smp_apic_timer_interrupt+0x33/0x3e^M [ 439.755663] [<ffffffff815559a4>] apic_timer_interrupt+0x84/0x90^M [ 439.755663] <EOI> ^M [ 439.755663] [<ffffffff81554350>] ? _raw_spin_unlock_irq+0x32/0x4a^M [ 439.755663] [<ffffffff8106a98b>] finish_task_switch+0xe0/0x163^M [ 439.755663] [<ffffffff8106a94d>] ? finish_task_switch+0xa2/0x163^M [ 439.755663] [<ffffffff81550066>] __schedule+0x469/0x6cd^M [ 439.755663] [<ffffffff8155039b>] schedule+0x82/0x9a^M [ 439.789267] [<ffffffff8119b28b>] signalfd_read+0x186/0x49a^M [ 439.790911] [<ffffffff8106d86a>] ? wake_up_q+0x47/0x47^M [ 439.790911] [<ffffffff811618c2>] __vfs_read+0x28/0x9f^M [ 439.790911] [<ffffffff8117a289>] ? __fget_light+0x4d/0x74^M [ 439.790911] [<ffffffff811620a7>] vfs_read+0x7a/0xc6^M [ 439.790911] [<ffffffff8116292b>] SyS_read+0x49/0x7f^M [ 439.790911] [<ffffffff81554c17>] entry_SYSCALL_64_fastpath+0x12/0x6f^M [ 439.790911] Code: 48 89 e5 e8 a9 b8 e7 ff 5d c3 0f 1f 44 00 00 55 89 f2 48 89 e5 41 54 41 89 f4 53 48 8b 47 60 48 8b 1c d0 48 8b 7b 30 48 8b 53 38 <48> 8b 87 58 01 00 00 48 85 c0 75 09 48 8b 97 88 0c 00 00 eb 10 ^M [ 439.790911] RIP [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.790911] RSP <ffff880819203da0>^M [ 439.790911] CR2: 0000000000000158^M [ 439.790911] ---[ end trace d40af58949325661 ]---^M Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-01blk-mq: Shared tag enhancementsKeith Busch1-0/+1
Storage controllers may expose multiple block devices that share hardware resources managed by blk-mq. This patch enhances the shared tags so a low-level driver can access the shared resources not tied to the unshared h/w contexts. This way the LLD can dynamically add and delete disks and request queues without having to track all the request_queue hctx's to iterate outstanding tags. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-23blk-mq: add tag allocation policyShaohua Li1-1/+3
This is the blk-mq part to support tag allocation policy. The default allocation policy isn't changed (though it's not a strict FIFO). The new policy is round-robin for libata. But it's a try-best implementation. If multiple tasks are competing, the tags returned will be mixed (which is unavoidable even with !mq, as requests from different tasks can be mixed in queue) Cc: Jens Axboe <axboe@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31block: wake up waiters when a queue is marked dyingJens Axboe1-0/+1
If it's dying, we can't expect new request to complete and come in an wake up other tasks waiting for requests. So after we have marked it as dying, wake up everybody currently waiting for a request. Once they wake, they will retry their allocation and fail appropriately due to the state of the queue. Tested-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17blk-mq: bitmap tag: fix races on shared ::wake_index fieldsAlexander Gordeev1-1/+1
Fix racy updates of shared blk_mq_bitmap_tags::wake_index and blk_mq_hw_ctx::wake_index fields. Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03blk-mq: fix schedule from atomic contextMing Lei1-1/+1
blk_mq_put_ctx() has to be called before io_schedule() in bt_get(). This patch fixes the problem by taking similar approach from percpu_ida allocation for the situation. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28blk-mq: remove blk_mq_wait_for_tagsChristoph Hellwig1-1/+0
The current logic for blocking tag allocation is rather confusing, as we first allocated and then free again a tag in blk_mq_wait_for_tags, just to attempt a non-blocking allocation and then repeat if someone else managed to grab the tag before us. Instead change blk_mq_alloc_request_pinned to simply do a blocking tag allocation itself and use the request we get back from it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-23blk-mq: export blk_mq_tag_busy_iterSam Bradshaw1-1/+0
Export the blk-mq in-flight tag iterator for driver consumption. This is particularly useful in exception paths or SRSI where in-flight IOs need to be cancelled and/or reissued. The NVMe driver conversion will use this. Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-20blk-mq: allow changing of queue depth through sysfsJens Axboe1-0/+1
For request_fn based devices, the block layer exports a 'nr_requests' file through sysfs to allow adjusting of queue depth on the fly. Currently this returns -EINVAL for blk-mq, since it's not wired up. Wire this up for blk-mq, so that it now also always dynamic adjustments of the allowed queue depth for any given block device managed by blk-mq. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-19Merge branch 'for-3.16/blk-mq-tagging' into for-3.16/coreJens Axboe1-3/+24
Signed-off-by: Jens Axboe <axboe@fb.com> Conflicts: block/blk-mq-tag.c
2014-05-19blk-mq: move the cache friendly bitmap type of out blk-mq-tagJens Axboe1-6/+3
We will use it for the pending list in blk-mq core as well. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-13blk-mq: improve support for shared tags mapsJens Axboe1-3/+24
This adds support for active queue tracking, meaning that the blk-mq tagging maintains a count of active users of a tag set. This allows us to maintain a notion of fairness between users, so that we can distribute the tag depth evenly without starving some users while allowing others to try unfair deep queues. If sharing of a tag set is detected, each hardware queue will track the depth of its own queue. And if this exceeds the total depth divided by the number of active queues, the user is actively throttled down. The active queue count is done lazily to avoid bouncing that data between submitter and completer. Each hardware queue gets marked active when it allocates its first tag, and gets marked inactive when 1) the last tag is cleared, and 2) the queue timeout grace period has passed. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-09blk-mq: use sparser tag layout for lower queue depthJens Axboe1-3/+4
For best performance, spreading tags over multiple cachelines makes the tagging more efficient on multicore systems. But since we have 8 * sizeof(unsigned long) tags per cacheline, we don't always get a nice spread. Attempt to spread the tags over at least 4 cachelines, using fewer number of bits per unsigned long if we have to. This improves tagging performance in setups with 32-128 tags. For higher depths, the spread is the same as before (BITS_PER_LONG tags per cacheline). Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-09blk-mq: implement new and more efficient tagging schemeJens Axboe1-8/+34
blk-mq currently uses percpu_ida for tag allocation. But that only works well if the ratio between tag space and number of CPUs is sufficiently high. For most devices and systems, that is not the case. The end result if that we either only utilize the tag space partially, or we end up attempting to fully exhaust it and run into lots of lock contention with stealing between CPUs. This is not optimal. This new tagging scheme is a hybrid bitmap allocator. It uses two tricks to both be SMP friendly and allow full exhaustion of the space: 1) We cache the last allocated (or freed) tag on a per blk-mq software context basis. This allows us to limit the space we have to search. The key element here is not caching it in the shared tag structure, otherwise we end up dirtying more shared cache lines on each allocate/free operation. 2) The tag space is split into cache line sized groups, and each context will start off randomly in that space. Even up to full utilization of the space, this divides the tag users efficiently into cache line groups, avoiding dirtying the same one both between allocators and between allocator and freeer. This scheme shows drastically better behaviour, both on small tag spaces but on large ones as well. It has been tested extensively to show better performance for all the cases blk-mq cares about. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-29blk-mq: fix waiting for reserved tagsJens Axboe1-1/+1
blk_mq_wait_for_tags() is only able to wait for "normal" tags, not reserved tags. Pass in which one we should attempt to get a tag for, so that waiting for reserved tags will work. Reserved tags are used for internal commands, which are usually serialized. Hence no waiting generally takes place, but we should ensure that it actually works if users need that functionality. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15blk-mq: split out tag initialization, support shared tagsChristoph Hellwig1-1/+18
Add a new blk_mq_tag_set structure that gets set up before we initialize the queue. A single blk_mq_tag_set structure can be shared by multiple queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Modular export of blk_mq_{alloc,free}_tagset added by me. Signed-off-by: Jens Axboe <axboe@fb.com>
2013-10-25blk-mq: new multi-queue block IO queueing mechanismJens Axboe1-0/+27
Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>