| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently blkdev_issue_zeroout cascades down from discards (if the driver
guarantees that discards zero data), to WRITE SAME and then to a loop
writing zeroes. Unfortunately we ignore run-time EOPNOTSUPP errors in the
block layer blkdev_issue_discard helper to work around DM volumes that
may have mixed discard support underneath.
This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to
blkdev_issue_discard that indicates we are called for zeroing operation.
This allows both to ignore the EOPNOTSUPP hack and actually consolidating
the discard_zeroes_data check into the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This converts the block issue discard helper and users to use
the bio_set_op_attrs accessor and only pass in the operation flags
like REQ_SEQURE.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
submit_bio_wait() gives the caller an opportunity to examine
struct bio and so expects the caller to issue the put_bio()
This fixes a memory leak reported by a few people in 4.7-rc2
kmemleak report after 9082e87bfbf8 ("block: remove struct bio_batch")
Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Larry Finger@lwfinger.net
Tested-by: David Drysdale <drysdale@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Commit 38f25255330 ("block: add __blkdev_issue_discard") incorrectly
disallowed the early return of -EOPNOTSUPP if the device doesn't support
discard (or secure discard). This early return of -EOPNOTSUPP has
always been part of blkdev_issue_discard() interface so there isn't a
good reason to break that behaviour -- especially when it can be easily
reinstated.
The nuance of allowing early return of -EOPNOTSUPP vs disallowing late
return of -EOPNOTSUPP is: if the overall device never advertised support
for discards and one is issued to the device it is beneficial to inform
the caller that discards are not supported via -EOPNOTSUPP. But if a
device advertises discard support it means that at least a subset of the
device does have discard support -- but it could be that discards issued
to some regions of a stacked device will not be supported. In that case
the late return of -EOPNOTSUPP must be disallowed.
Fixes: 38f25255330 ("block: add __blkdev_issue_discard")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This is a version of blkdev_issue_discard which doesn't wait for
the I/O to complete, but instead allows the caller to submit
the final bio and/or chain it to others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagig@grimberg.me>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
It can be replaced with a combination of bio_chain and submit_bio_wait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagig@grimberg.me>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In commit b49a087("block: remove split code in
blkdev_issue_{discard,write_same}"), discard_granularity and alignment
checks were removed. Ideally, with bio late splitting, the upper layers
shouldn't need to depend on device's limits.
Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe
device when mkfs.xfs. We have not found the root cause yet.
This patch re-adds discard_granularity and alignment checks by reverting
the related changes in commit b49a087. The good thing is now we can
remove the 2G discard size cap and just use UINT_MAX to avoid bi_size
overflow.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The split code in blkdev_issue_{discard,write_same} can go away
now that any driver that cares does the split. We have to make
sure bio size doesn't overflow.
For discard, we set max discard sectors to (1<<31)>>9 to ensure
it doesn't overflow bi_size and hopefully it is of the proper
granularity as long as the granularity is a power of two.
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
blkdev_issue_zeroout() printed a warning if a device failed a discard or
write same request despite advertising support for these. That's fine
for SCSI since we'll disable these commands if we get an error back from
the disk saying that they are not supported. And consequently the
warning only gets printed once.
There are other types of block devices that support discard, however,
and these may return -EOPNOTSUPP for each command but leave discard
enabled in the queue limits. This will cause a warning message for every
blkdev_issue_zeroout() invocation.
Remove the offending warning messages.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
blkdev_issue_discard() will zero a given block range. This is done by
way of explicit writing, thus provisioning or allocating the blocks on
disk.
There are use cases where the desired behavior is to zero the blocks but
unprovision them if possible. The blocks must deterministically contain
zeroes when they are subsequently read back.
This patch adds a flag to blkdev_issue_zeroout() that provides this
variant. If the discard flag is set and a block device guarantees
discard_zeroes_data we will use REQ_DISCARD to clear the block range. If
the device does not support discard_zeroes_data or if the discard
request fails we will fall back to first REQ_WRITE_SAME and then a
regular REQ_WRITE.
Also update the callers of blkdev_issue_zero() to reflect the new flag
and make sb_issue_zeroout() prefer the discard approach.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
__blkdev_issue_zeroout is only used in blk-lib.c
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When mkfs issues a full device discard and the device only
supports discards of a smallish size, we can loop in
blkdev_issue_discard() for a long time. If preempt isn't enabled,
this can turn into a softlock situation and the kernel will
start complaining.
Add an explicit cond_resched() at the end of the loop to avoid
that.
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
|
|
do_div() (called by sector_div() if CONFIG_LBDAF=y) is meant for divisions
of 64-bit number by 32-bit numbers. Passing 64-bit divisor types caused
issues in the past on 32-bit platforms, cfr. commit
ea077b1b96e073eac5c3c5590529e964767fc5f7 ("m68k: Truncate base in
do_div()").
As queue_limits.max_discard_sectors and .discard_granularity are unsigned
int, max_discard_sectors and granularity should be unsigned int.
As bdev_discard_alignment() returns int, alignment should be int.
Now 2 calls to sector_div() can be replaced by 32-bit arithmetic:
- The 64-bit modulo operation can become a 32-bit modulo operation,
- The 64-bit division and multiplication can be replaced by a 32-bit
modulo operation and a subtraction.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using wait_for_completion() for waiting for a IO request to be executed
results in wrong iowait time accounting. For example, a system having
the only task doing write() and fdatasync() on a block device can be
reported being idle instead of iowaiting as it should because
blkdev_issue_flush() calls wait_for_completion() which in turn calls
schedule() that does not increment the iowait proc counter and thus does
not turn on iowait time accounting.
The patch makes block layer use wait_for_completion_io() instead of
wait_for_completion() where appropriate to account iowait time
correctly.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Last post of this patch appears lost, so I resend this.
Now discard merge works, add plug for blkdev_issue_discard. This will help
discard request merge especially for raid0 case. In raid0, a big discard
request is split to small requests, and if correct plug is added, such small
requests can be merged in low layer.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In MD raid case, discard granularity might not be power of 2, for example, a
4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for
such cases.
Reported-by: Neil Brown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the device supports WRITE SAME, use that to optimize zeroing of
blocks. If the device does not support WRITE SAME or if the operation
fails, fall back to writing zeroes the old-fashioned way.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.
This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a disk has large discard_granularity and small max_discard_sectors,
discards are not split with optimal alignment. In the limit case of
discard_granularity == max_discard_sectors, no request could be aligned
correctly, so in fact you might end up with no discarded logical blocks
at all.
Another example that helps showing the condition in the patch is with
discard_granularity == 64, max_discard_sectors == 128. A request that is
submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257.
However, only 2 aligned blocks out of 3 are included in the request;
128..191 may be left intact and not discarded. With this patch, the
first request will be truncated to ensure good alignment of what's left,
and the split will be 2..127, 128..255, 256..257. The patch will also
take into account the discard_alignment.
At most one extra request will be introduced, because the first request
will be reduced by at most granularity-1 sectors, and granularity
must be less than max_discard_sectors. Subsequent requests will run
on round_down(max_discard_sectors, granularity) sectors, as in the
current code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mostly a preparation for the next patch.
In principle this fixes an infinite loop if max_discard_sectors < granularity,
but that really shouldn't happen.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A '!' snuck in before the unlikely, rendering it useless.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Due to the recently identified overflow in read_capacity_16() it was
possible for max_discard_sectors to be zero but still have discards
enabled on the associated device's queue.
Eliminate the possibility for blkdev_issue_discard to infinitely loop.
Interestingly this issue wasn't identified until a device, whose
discard_granularity was 0 due to read_capacity_16 overflow, was consumed
by blk_stack_limits() to construct limits for a higher-level DM
multipath device. The multipath device's resulting limits never had the
discard limits stacked because blk_stack_limits() will only do so if
the bottom device's discard_granularity != 0. This resulted in the
multipath device's limits.max_discard_sectors being 0.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Currently we return -EOPNOTSUPP in blkdev_issue_discard() if any of the
bio fails due to underlying device not supporting discard request.
However, if the device is for example dm device composed of devices
which some of them support discard and some of them does not, it is ok
for some bios to fail with EOPNOTSUPP, but it does not mean that discard
is not supported at all.
This commit removes the check for bios failed with EOPNOTSUPP and change
blkdev_issue_discard() to return operation not supported if and only if
the device does not actually supports it, not just part of the device as
some bios might indicate.
This change also fixes problem with BLKDISCARD ioctl() which now works
correctly on such dm devices.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
In blkdev_issue_zeroout() we are submitting regular WRITE bios, so we do
not need to check for -EOPNOTSUPP specifically in case of error. Also
there is no need to have label submit: because there is no way to jump
out from the while cycle without an error and we really want to exit,
rather than try again. And also remove the check for (sz == 0) since at
that point sz can never be zero.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Currently we are waiting for every submitted REQ_DISCARD bio separately,
but it can have unwanted consequences of repeatedly flushing the queue,
so we rather submit bios in batches and wait for the entire batch, hence
narrowing the window of other ios going in.
Use bio_batch_end_io() and struct bio_batch for that purpose, the same
is used by blkdev_issue_zeroout(). Also change bio_batch_end_io() so we
always set !BIO_UPTODATE in the case of error and remove the check for
bb, since we are the only user of this function and we always set this.
Remove bio_get()/bio_put() from the blkdev_issue_discard() since
bio_alloc() and bio_batch_end_io() is doing the same thing, hence it is
not needed anymore.
I have done simple dd testing with surprising results. The script I have
used is:
for i in $(seq 10); do
echo $i
dd if=/dev/sdb1 of=/dev/sdc1 bs=4k &
sleep 5
done
/usr/bin/time -f %e ./blkdiscard /dev/sdc1
Running time of BLKDISCARD on the whole device:
with patch without patch
0.95 15.58
So we can see that in this artificial test the kernel with the patch
applied is approx 16x faster in discarding the device.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
|
|
barrier is already removed, so remove the obsolete comments
in blkdev_issue_zeroout.
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
BZ29402
https://bugzilla.kernel.org/show_bug.cgi?id=29402
We can hit serious mis-synchronization in bio completion path of
blkdev_issue_zeroout() leading to a panic.
The problem is that when we are going to wait_for_completion() in
blkdev_issue_zeroout() we check if the bb.done equals issued (number of
submitted bios). If it does, we can skip the wait_for_completition()
and just out of the function since there is nothing to wait for.
However, there is a ordering problem because bio_batch_end_io() is
calling atomic_inc(&bb->done) before complete(), hence it might seem to
blkdev_issue_zeroout() that all bios has been completed and exit. At
this point when bio_batch_end_io() is going to call complete(bb->wait),
bb and wait does not longer exist since it was allocated on stack in
blkdev_issue_zeroout() ==> panic!
(thread 1) (thread 2)
bio_batch_end_io() blkdev_issue_zeroout()
if(bb) { ...
if (bb->end_io) ...
bb->end_io(bio, err); ...
atomic_inc(&bb->done); ...
... while (issued != atomic_read(&bb.done))
... (let issued == bb.done)
... (do the rest of the function)
... return ret;
complete(bb->wait);
^^^^^^^^
panic
We can fix this easily by simplifying bio_batch and completion counting.
Also remove bio_end_io_t *end_io since it is not used.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Eric Whitney <eric.whitney@hp.com>
Tested-by: Eric Whitney <eric.whitney@hp.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Remove support for barriers on discards, which is unused now. Also
remove the DISCARD_NOBARRIER I/O type in favour of just setting the
rw flags up locally in blkdev_issue_discard.
tj: Also remove DISCARD_SECURE and use REQ_SECURE directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- If function called without barrier option retvalue is incorrect
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
If the queue doesn't have a limit set, or it just set UINT_MAX like
we default to, we coud be sending down a discard request that isn't
of the correct granularity if the block size is > 512b.
Fix this by adjusting max_discard_sectors down to the proper
alignment.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Allocating a fixed payload for discard requests always was a horrible hack,
and it's not coming to byte us when adding support for discard in DM/MD.
So change the code to leave the allocation of a payload to the lowlevel
driver. Unfortunately that means we'll need another hack, which allows
us to update the various block layer length fields indicating that we
have a payload. Instead of hiding this in sd.c, which we already partially
do for UNMAP support add a documented helper in the core block layer for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Just cast the page size to sector_t, that will always fit.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
- Add bio_batch helper primitive. This is rather generic primitive
for submitting/waiting a complex request which consists of several
bios.
- blkdev_issue_zeroout() generate number of zero filed write bios.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Move blkdev_issue_discard from blk-barrier.c because it is
not barrier related.
Later the file will be populated by other helpers.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
