summaryrefslogtreecommitdiffstats
path: root/block/blk-flush.c
AgeCommit message (Collapse)AuthorFilesLines
2017-04-19block: make __blk_end_bidi_request privateChristoph Hellwig1-1/+1
blk_insert_flush should be using __blk_end_request to start with. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-24block: remove outdated part of blkdev_issue_flush() commentEric Biggers1-2/+1
blkdev_issue_flush() is now always synchronous, and it no longer has a flags argument. So remove the part of the comment about the WAIT flag. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17block: don't defer flushes on blk-mq + schedulingJens Axboe1-1/+7
For blk-mq with scheduling, we can potentially end up with ALL driver tags assigned and sitting on the flush queues. If we defer because of an inlfight data request, then we can deadlock if that data request doesn't already have a tag assigned. This fixes a deadlock with running the xfs/297 xfstest, where thousands of syncs can cause the drive queue to stall. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-31block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig1-1/+0
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27block: allow specifying size for extra command dataChristoph Hellwig1-3/+2
This mirrors the blk-mq capabilities to allocate extra drivers-specific data behind struct request by setting a cmd_size field, as well as having a constructor / destructor for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq-sched: add flush insertion into blk_mq_sched_insert_request()Jens Axboe1-1/+1
Instead of letting the caller check this and handle the details of inserting a flush request, put the logic in the scheduler insertion function. This fixes direct flush insertion outside of the usual make_request_fn calls, like from dm via blk_insert_cloned_request(). Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-17blk-mq-sched: add framework for MQ capable IO schedulersJens Axboe1-5/+7
This adds a set of hooks that intercepts the blk-mq path of allocating/inserting/issuing/completing requests, allowing us to develop a scheduler within that framework. We reuse the existing elevator scheduler API on the registration side, but augment that with the scheduler flagging support for the blk-mq interfce, and with a separate set of ops hooks for MQ devices. We split driver and scheduler tags, so we can run the scheduling independently of device queue depth. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-11/+16
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-12-09blk-flush: run the queue when inserting blk-mq flushJens Axboe1-1/+1
Currently we pass in to run the queue async, but don't flag the queue to be run. We don't need to run it async here, but we should run it. So fixup the parameters. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-11-08block: set REQ_SYNC if we clear REQ_FUA|REQ_PREFLUSHJens Axboe1-0/+7
If we insert a flush request, we clear REQ_PREFLUSH and/or REQ_FUA, depending on flush settings. Since op_is_sync() factors those flags in for deciding whether this request is sync or not, we should set REQ_SYNC to avoid screwing up this accounting. This should be less fragile. Reported-by: Logan Gunthorpe <logang@deltatee.com> Fixes: b685d3d65ac ("block: treat REQ_FUA and REQ_PREFLUSH as synchronous") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02blk-mq: Add a kick_requeue_list argument to blk_mq_requeue_request()Bart Van Assche1-4/+1
Most blk_mq_requeue_request() and blk_mq_add_to_requeue_list() calls are followed by kicking the requeue list. Hence add an argument to these two functions that allows to kick the requeue list. This was proposed by Christoph Hellwig. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01block,fs: use REQ_* flags directlyChristoph Hellwig1-2/+2
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: better op and flags encodingChristoph Hellwig1-1/+1
Now that we don't need the common flags to overflow outside the range of a 32-bit type we can encode them the same way for both the bio and request fields. This in addition allows us to place the operation first (and make some room for more ops while we're at it) and to stop having to shift around the operation values. In addition this allows passing around only one value in the block layer instead of two (and eventuall also in the file systems, but we can do that later) and thus clean up a lot of code. Last but not least this allows decreasing the size of the cmd_flags field in struct request to 32-bits. Various functions passing this value could also be updated, but I'd like to avoid the churn for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: split out request-only flags into a new namespaceChristoph Hellwig1-4/+5
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-26block: flush: fix IO hang in case of flood fua reqMing Lei1-0/+28
This patch fixes one issue reported by Kent, which can be triggered in bcachefs over sata disk. Actually it is a generic issue in block flush vs. blk-tag. Cc: Christoph Hellwig <hch@infradead.org> Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: remove ->map_queueChristoph Hellwig1-3/+3
All drivers use the default, so provide an inline version of it. If we ever need other queue mapping we can add an optional method back, although supporting will also require major changes to the queue setup code. This provides better code generation, and better debugability as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie1-8/+8
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers: add REQ_OP_FLUSH operationMike Christie1-2/+2
This adds a REQ_OP_FLUSH operation that is sent to request_fn based drivers by the block layer's flush code, instead of sending requests with the request->cmd_flags REQ_FLUSH bit set. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie1-1/+1
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie1-1/+2
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13block: kill off q->flush_flagsJens Axboe1-5/+6
Now that we converted everything to the newer block write cache interface, kill off the queue flush_flags and queueable flush entries. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25Revert "blk-flush: Queue through IO scheduler when flush not required"Jens Axboe1-1/+1
This reverts commit 1b2ff19e6a957b1ef0f365ad331b608af80e932e. Jan writes: -- Thanks for report! After some investigation I found out we allocate elevator specific data in __get_request() only for non-flush requests. And this is actually required since the flush machinery uses the space in struct request for something else. Doh. So my patch is just wrong and not easy to fix since at the time __get_request() is called we are not sure whether the flush machinery will be used in the end. Jens, please revert 1b2ff19e6a957b1ef0f365ad331b608af80e932e. Thanks! I'm somewhat surprised that you can reliably hit the race where flushing gets disabled for the device just while the request is in flight. But I guess during boot it makes some sense. -- So let's just revert it, we can fix the queue run manually after the fact. This race is rare enough that it didn't trigger in testing, it requires the specific disable-while-in-flight scenario to trigger.
2015-11-16blk-flush: Queue through IO scheduler when flush not requiredJan Kara1-1/+1
Currently blk_insert_flush() just adds flush request to q->queue_head when flush is not required. That completely bypasses IO scheduler so e.g. CFQ can be idling waiting for new request to arrive and will idle through the whole window unnecessarily. Luckily this only happens in rare cases as usually checks in generic_make_request_checks() clear FLUSH and FUA flags early if they are not needed. When no flushing is actually required, we can easily fix the problem by properly queueing the request through the IO scheduler. Ideally IO scheduler should be also made aware of requests queued via blk_flush_queue_rq(). However inserting flush request through IO scheduler can have unwanted side-effects since due to flush batching delaying the flush request in IO scheduler will delay all flush requests possibly coming from other processes. So we keep adding the request directly to q->queue_head. Signed-off-by: Jan Kara <jack@suse.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-15blk-mq: fix race between timeout and freeing requestMing Lei1-1/+14
Inside timeout handler, blk_mq_tag_to_rq() is called to retrieve the request from one tag. This way is obviously wrong because the request can be freed any time and some fiedds of the request can't be trusted, then kernel oops might be triggered[1]. Currently wrt. blk_mq_tag_to_rq(), the only special case is that the flush request can share same tag with the request cloned from, and the two requests can't be active at the same time, so this patch fixes the above issue by updating tags->rqs[tag] with the active request(either flush rq or the request cloned from) of the tag. Also blk_mq_tag_to_rq() gets much simplified with this patch. Given blk_mq_tag_to_rq() is mainly for drivers and the caller must make sure the request can't be freed, so in bt_for_each() this helper is replaced with tags->rqs[tag]. [1] kernel oops log [ 439.696220] BUG: unable to handle kernel NULL pointer dereference at 0000000000000158^M [ 439.697162] IP: [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.700653] PGD 7ef765067 PUD 7ef764067 PMD 0 ^M [ 439.700653] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 439.700653] Dumping ftrace buffer:^M [ 439.700653] (ftrace buffer empty)^M [ 439.700653] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 439.700653] CPU: 6 PID: 2779 Comm: stress-ng-sigfd Not tainted 4.2.0-rc5-next-20150805+ #265^M [ 439.730500] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 439.730500] task: ffff880605308000 ti: ffff88060530c000 task.ti: ffff88060530c000^M [ 439.730500] RIP: 0010:[<ffffffff812d89ba>] [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.730500] RSP: 0018:ffff880819203da0 EFLAGS: 00010283^M [ 439.730500] RAX: ffff880811b0e000 RBX: ffff8800bb465f00 RCX: 0000000000000002^M [ 439.730500] RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000^M [ 439.730500] RBP: ffff880819203db0 R08: 0000000000000002 R09: 0000000000000000^M [ 439.730500] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000202^M [ 439.730500] R13: ffff880814104800 R14: 0000000000000002 R15: ffff880811a2ea00^M [ 439.730500] FS: 00007f165b3f5740(0000) GS:ffff880819200000(0000) knlGS:0000000000000000^M [ 439.730500] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b^M [ 439.730500] CR2: 0000000000000158 CR3: 00000007ef766000 CR4: 00000000000006e0^M [ 439.730500] Stack:^M [ 439.730500] 0000000000000008 ffff8808114eed90 ffff880819203e00 ffffffff812dc104^M [ 439.755663] ffff880819203e40 ffffffff812d9f5e 0000020000000000 ffff8808114eed80^M [ 439.755663] Call Trace:^M [ 439.755663] <IRQ> ^M [ 439.755663] [<ffffffff812dc104>] bt_for_each+0x6e/0xc8^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812dc1b3>] blk_mq_tag_busy_iter+0x55/0x5e^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff812d8911>] blk_mq_rq_timer+0x5d/0xd4^M [ 439.755663] [<ffffffff810a3e10>] call_timer_fn+0xf7/0x284^M [ 439.755663] [<ffffffff810a3d1e>] ? call_timer_fn+0x5/0x284^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff810a46d6>] run_timer_softirq+0x1ce/0x1f8^M [ 439.755663] [<ffffffff8104c367>] __do_softirq+0x181/0x3a4^M [ 439.755663] [<ffffffff8104c76e>] irq_exit+0x40/0x94^M [ 439.755663] [<ffffffff81031482>] smp_apic_timer_interrupt+0x33/0x3e^M [ 439.755663] [<ffffffff815559a4>] apic_timer_interrupt+0x84/0x90^M [ 439.755663] <EOI> ^M [ 439.755663] [<ffffffff81554350>] ? _raw_spin_unlock_irq+0x32/0x4a^M [ 439.755663] [<ffffffff8106a98b>] finish_task_switch+0xe0/0x163^M [ 439.755663] [<ffffffff8106a94d>] ? finish_task_switch+0xa2/0x163^M [ 439.755663] [<ffffffff81550066>] __schedule+0x469/0x6cd^M [ 439.755663] [<ffffffff8155039b>] schedule+0x82/0x9a^M [ 439.789267] [<ffffffff8119b28b>] signalfd_read+0x186/0x49a^M [ 439.790911] [<ffffffff8106d86a>] ? wake_up_q+0x47/0x47^M [ 439.790911] [<ffffffff811618c2>] __vfs_read+0x28/0x9f^M [ 439.790911] [<ffffffff8117a289>] ? __fget_light+0x4d/0x74^M [ 439.790911] [<ffffffff811620a7>] vfs_read+0x7a/0xc6^M [ 439.790911] [<ffffffff8116292b>] SyS_read+0x49/0x7f^M [ 439.790911] [<ffffffff81554c17>] entry_SYSCALL_64_fastpath+0x12/0x6f^M [ 439.790911] Code: 48 89 e5 e8 a9 b8 e7 ff 5d c3 0f 1f 44 00 00 55 89 f2 48 89 e5 41 54 41 89 f4 53 48 8b 47 60 48 8b 1c d0 48 8b 7b 30 48 8b 53 38 <48> 8b 87 58 01 00 00 48 85 c0 75 09 48 8b 97 88 0c 00 00 eb 10 ^M [ 439.790911] RIP [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.790911] RSP <ffff880819203da0>^M [ 439.790911] CR2: 0000000000000158^M [ 439.790911] ---[ end trace d40af58949325661 ]---^M Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25blk-mq: support per-distpatch_queue flush machineryMing Lei1-7/+14
This patch supports to run one single flush machinery for each blk-mq dispatch queue, so that: - current init_request and exit_request callbacks can cover flush request too, then the buggy copying way of initializing flush request's pdu can be fixed - flushing performance gets improved in case of multi hw-queue In fio sync write test over virtio-blk(4 hw queues, ioengine=sync, iodepth=64, numjobs=4, bs=4K), it is observed that througput gets increased a lot over my test environment: - throughput: +70% in case of virtio-blk over null_blk - throughput: +30% in case of virtio-blk over SSD image The multi virtqueue feature isn't merged to QEMU yet, and patches for the feature can be found in below tree: git://kernel.ubuntu.com/ming/qemu.git v2.1.0-mq.4 And simply passing 'num_queues=4 vectors=5' should be enough to enable multi queue(quad queue) feature for QEMU virtio-blk. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: introduce 'blk_mq_ctx' parameter to blk_get_flush_queueMing Lei1-6/+5
This patch adds 'blk_mq_ctx' parameter to blk_get_flush_queue(), so that this function can find the corresponding blk_flush_queue bound with current mq context since the flush queue will become per hw-queue. For legacy queue, the parameter can be simply 'NULL'. For multiqueue case, the parameter should be set as the context from which the related request is originated. With this context info, the hw queue and related flush queue can be found easily. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: flush: avoid to figure out flush queue unnecessarilyMing Lei1-14/+16
Just figuring out flush queue at the entry of kicking off flush machinery and request's completion handler, then pass it through. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: remove blk_init_flush() and its pairMing Lei1-17/+2
Now mission of the two helpers is over, and just call blk_alloc_flush_queue() and blk_free_flush_queue() directly. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: introduce blk_flush_queue to drive flush machineryMing Lei1-41/+68
This patch introduces 'struct blk_flush_queue' and puts all flush machinery related fields into this structure, so that - flush implementation details aren't exposed to driver - it is easy to convert to per dispatch-queue flush machinery This patch is basically a mechanical replacement. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: avoid to use q->flush_rq directlyMing Lei1-8/+9
This patch trys to use local variable to access flush request, so that we can convert to per-queue flush machinery a bit easier. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: move flush initialization to blk_flush_initMing Lei1-0/+4
These fields are always used with the flush request, so initialize them together. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: introduce blk_init_flush and its pairMing Lei1-1/+18
These two temporary functions are introduced for holding flush initialization and de-initialization, so that we can introduce 'flush queue' easier in the following patch. And once 'flush queue' and its allocation/free functions are ready, they will be removed for sake of code readability. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25blk-mq: allocate flush_rq in blk_mq_init_flush()Ming Lei1-1/+10
It is reasonable to allocate flush req in blk_mq_init_flush(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22blk-mq: remove unnecessary blk_clear_rq_complete()Ming Lei1-2/+0
This patch removes two unnecessary blk_clear_rq_complete(), the REQ_ATOM_COMPLETE flag is cleared inside blk_mq_start_request(), so: - The blk_clear_rq_complete() in blk_flush_restore_request() needn't because the request will be freed later, and clearing it here may open a small race window with timeout. - The blk_clear_rq_complete() in blk_mq_requeue_request() isn't necessary too, even though REQ_ATOM_STARTED is cleared in __blk_mq_requeue_request(), in theory it still may cause a small race window with timeout since the two clear_bit() may be reordered. Signed-off-by: Ming Lei <ming.lei@canoical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22blk-mq: rename blk_mq_end_io to blk_mq_end_requestChristoph Hellwig1-2/+2
Now that we've changed the driver API on the submission side use the opportunity to fix up the name on the completion side to fit into the general scheme. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-11block: remove elv_abort_queue and blk_abort_flushesChristoph Hellwig1-38/+0
elv_abort_queue has no callers, and blk_abort_flushes is only called by elv_abort_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04block: mq flush: clear flush_rq's tag in flush_end_io()Ming Lei1-1/+1
blk_mq_tag_to_rq() needs to be able to tell if it should return the original request, or the flush request if we are doing a flush sequence. Clear the flush tag when IO completes for a flush, since that is what we are comparing against. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30blk-mq: blk_mq_tag_to_rq should handle flush requestShaohua Li1-1/+3
flush request is special, which borrows the tag from the parent request. Hence blk_mq_tag_to_rq needs special handling to return the flush request from the tag. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28blk-mq: add helper to insert requests from irq contextChristoph Hellwig1-12/+4
Both the cache flush state machine and the SCSI midlayer want to submit requests from irq context, and the current per-request requeue_work unfortunately causes corruption due to sharing with the csd field for flushes. Replace them with a per-request_queue list of requests to be requeued. Based on an earlier test by Ming Lei. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16blk-mq: rename mq_flush_work struct request memberChristoph Hellwig1-3/+3
We will use this work_struct to requeue scsi commands from the completion handler as well, so give it a more generic name. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15blk-mq: make ->flush_rq fully transparent to driversChristoph Hellwig1-10/+2
Drivers shouldn't have to care about the block layer setting aside a request to implement the flush state machine. We already override the mq context and tag to make it more transparent, but so far haven't deal with the driver private data in the request. Make sure to override this as well, and while we're at it add a proper helper sitting in blk-mq.c that implements the full impersonation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15blk-mq: do not initialize req->specialChristoph Hellwig1-8/+2
Drivers can reach their private data easily using the blk_mq_rq_to_pdu helper and don't need req->special. By not initializing it code can be simplified nicely, and we also shave off a few more instructions from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09block: remove 'q' parameter from kblockd_schedule_*_work()Jens Axboe1-1/+1
The queue parameter is never used, just get rid of it. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-08block: change flush sequence list addition back to front addMike Snitzer1-4/+7
Commit 18741986 inadvertently changed the rq flush insertion from a head to a tail insertion. Fix that back up. Signed-off-by: Mike Snitzer <msnitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-21blk-mq: merge blk_mq_insert_request and blk_mq_run_requestChristoph Hellwig1-2/+2
It's almost identical to blk_mq_insert_request, so fold the two into one slightly more generic function by making the flush special case a bit smarted. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-10blk-mq: rework flush sequencing logicChristoph Hellwig1-67/+38
Witch to using a preallocated flush_rq for blk-mq similar to what's done with the old request path. This allows us to set up the request properly with a tag from the actually allowed range and ->rq_disk as needed by some drivers. To make life easier we also switch to dynamic allocation of ->flush_rq for the old path. This effectively reverts most of "blk-mq: fix for flush deadlock" and "blk-mq: Don't reserve a tag for flush request" Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-01-30blk-mq: Don't reserve a tag for flush requestShaohua Li1-3/+5
Reserving a tag (request) for flush to avoid dead lock is a overkill. A tag is valuable resource. We can track the number of flush requests and disallow having too many pending flush requests allocated. With this patch, blk_mq_alloc_request_pinned() could do a busy nop (but not a dead loop) if too many pending requests are allocated and new flush request is allocated. But this should not be a problem, too many pending flush requests are very rare case. I verified this can fix the deadlock caused by too many pending flush requests. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-23block: Abstract out bvec iteratorKent Overstreet1-1/+1
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23block: submit_bio_wait() conversionsKent Overstreet1-18/+1
It was being open coded in a few places. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Chris Mason <chris.mason@fusionio.com> Acked-by: NeilBrown <neilb@suse.de>
2013-10-28blk-mq: fix for flush deadlockChristoph Hellwig1-1/+1
The flush state machine takes in a struct request, which then is submitted multiple times to the underling driver. The old block code requeses the same request for each of those, so it does not have an issue with tapping into the request pool. The new one on the other hand allocates a new request for each of the actualy steps of the flush sequence. If have already allocated all of the tags for IO, we will fail allocating the flush request. Set aside a reserved request just for flushes. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 16:16:31 +0000