summaryrefslogtreecommitdiffstats
path: root/block/blk-core.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-10block: Disable write plugging for zoned block devicesDamien Le Moal1-1/+1
Simultaneously writing to a sequential zone of a zoned block device from multiple contexts requires mutual exclusion for BIO issuing to ensure that writes happen sequentially. However, even for a well behaved user correctly implementing such synchronization, BIO plugging may interfere and result in BIOs from the different contextx to be reordered if plugging is done outside of the mutual exclusion section, e.g. the plug was started by a function higher in the call chain than the function issuing BIOs. Context A Context B | blk_start_plug() | ... | seq_write_zone() | mutex_lock(zone) | bio-0->bi_iter.bi_sector = zone->wp | zone->wp += bio_sectors(bio-0) | submit_bio(bio-0) | bio-1->bi_iter.bi_sector = zone->wp | zone->wp += bio_sectors(bio-1) | submit_bio(bio-1) | mutex_unlock(zone) | return | -----------------------> | seq_write_zone() | mutex_lock(zone) | bio-2->bi_iter.bi_sector = zone->wp | zone->wp += bio_sectors(bio-2) | submit_bio(bio-2) | mutex_unlock(zone) | <------------------------- | | blk_finish_plug() In the above example, despite the mutex synchronization ensuring the correct BIO issuing order 0, 1, 2, context A BIOs 0 and 1 end up being issued after BIO 2 of context B, when the plug is released with blk_finish_plug(). While this problem can be addressed using the blk_flush_plug_list() function (in the above example, the call must be inserted before the zone mutex lock is released), a simple generic solution in the block layer avoid this additional code in all zoned block device user code. The simple generic solution implemented with this patch is to introduce the internal helper function blk_mq_plug() to access the current context plug on BIO submission. This helper returns the current plug only if the target device is not a zoned block device or if the BIO to be plugged is not a write operation. Otherwise, the caller context plug is ignored and NULL returned, resulting is all writes to zoned block device to never be plugged. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10blkcg: implement REQ_CGROUP_PUNTTejun Heo1-0/+3
When a shared kthread needs to issue a bio for a cgroup, doing so synchronously can lead to priority inversions as the kthread can be trapped waiting for that cgroup. This patch implements REQ_CGROUP_PUNT flag which makes submit_bio() punt the actual issuing to a dedicated per-blkcg work item to avoid such priority inversions. This will be used to fix priority inversions in btrfs compression and should be generally useful as we grow filesystem support for comprehensive IO control. Cc: Chris Mason <clm@fb.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10block: init flush rq ref count to 1Josef Bacik1-0/+1
We discovered a problem in newer kernels where a disconnect of a NBD device while the flush request was pending would result in a hang. This is because the blk mq timeout handler does if (!refcount_inc_not_zero(&rq->ref)) return true; to determine if it's ok to run the timeout handler for the request. Flush_rq's don't have a ref count set, so we'd skip running the timeout handler for this request and it would just sit there in limbo forever. Fix this by always setting the refcount of any request going through blk_init_rq() to 1. I tested this with a nbd-server that dropped flush requests to verify that it hung, and then tested with this patch to verify I got the timeout as expected and the error handling kicked in. Thanks, Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: update print_req_error()Chaitanya Kulkarni1-4/+7
Improve the print_req_error with additional request fields which are helpful for debugging. Use newly introduced blk_op_str() to print the REQ_OP_XXX in the string format. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: add centralize REQ_OP_XXX to string helperChaitanya Kulkarni1-0/+36
In order to centralize the REQ_OP_XXX to string conversion which can be used in the block layer and different places in the kernel like f2fs, this patch adds a new helper function along with an array similar to the one present in the blk-mq-debugfs.c. We keep this helper functionality centralize under blk-core.c instead of blk-mq-debugfs.c since blk-core.c is configured using CONFIG_BLOCK and it will not be dependent on blk-mq-debugfs.c which is configured using CONFIG_BLK_DEBUG_FS. Next patch adjusts the code in the blk-mq-debugfs.c with newly introduced helper. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: improve print_req_errorChristoph Hellwig1-7/+9
Print the calling function instead of print_req_error as a prefix, and print the operation and op_flags separately instead of the whole field. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: mark blk_rq_bio_prep as inlineChristoph Hellwig1-11/+0
This function just has a few trivial assignments, has two callers with one of them being in the fastpath. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: simplify blk_recalc_rq_segmentsChristoph Hellwig1-2/+2
Return the segement and let the callers assign them, which makes the code a littler more obvious. Also pass the request instead of q plus bio chain, allowing for the use of rq_for_each_bvec. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: remove the bi_phys_segments field in struct bioChristoph Hellwig1-18/+14
We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: remove blk_init_request_from_bioChristoph Hellwig1-11/+0
lightnvm should have never used this function, as it is sending passthrough requests, so switch it to blk_rq_append_bio like all the other passthrough request users. Inline blk_init_request_from_bio into the only remaining caller. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: initialize the write priority in blk_rq_bio_prepChristoph Hellwig1-1/+1
The priority field also makes sense for passthrough requests, so initialize it in blk_rq_bio_prep. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-core: Remove blk_end_request*() declarationsPavel Begunkov1-1/+1
Commit a1ce35fa49852db60fc6e268 ("block: remove dead elevator code") deleted blk_end_request() and friends, but some declaration are still left. Purge them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-06block: free sched's request pool in blk_cleanup_queueMing Lei1-0/+13
In theory, IO scheduler belongs to request queue, and the request pool of sched tags belongs to the request queue too. However, the current tags allocation interfaces are re-used for both driver tags and sched tags, and driver tags is definitely host wide, and doesn't belong to any request queue, same with its request pool. So we need tagset instance for freeing request of sched tags. Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched tags to be freed before calling blk_mq_free_tag_set(). Commit 47cdee29ef9d94e ("block: move blk_exit_queue into __blk_release_queue") moves blk_exit_queue into __blk_release_queue for simplying the fast path in generic_make_request(), then causes oops during freeing requests of sched tags in __blk_release_queue(). Fix the above issue by move freeing request pool of sched tags into blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any in-queue requests at that time. Freeing sched tags has to be kept in queue's release handler becasue there might be un-completed dispatch activity which might refer to sched tags. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: 47cdee29ef9d94e485eb08f962c74943023a5271 ("block: move blk_exit_queue into __blk_release_queue") Tested-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-31block: print offending values when cloned rq limits are exceededJohn Pittman1-2/+5
While troubleshooting issues where cloned request limits have been exceeded, it is often beneficial to know the actual values that have been breached. Print these values, assisting in ease of identification of root cause of the breach. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-29block: don't protect generic_make_request_checks with blk_queue_enterMing Lei1-31/+6
Now a063057d7c73 ("block: Fix a race between request queue removal and the block cgroup controller") has been reverted, and blkcg_exit_queue() won't be called in blk_cleanup_queue() any more. So don't need to protect generic_make_request_checks() with blk_queue_enter(), then the total mess can be cleaned. 37f9579f4c31 ("blk-mq: Avoid that submitting a bio concurrently with device removal triggers a crash") is reverted. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-29block: move blk_exit_queue into __blk_release_queueMing Lei1-37/+0
Commit 498f6650aec8 ("block: Fix a race between the cgroup code and request queue initialization") moves what blk_exit_queue does into blk_cleanup_queue() for fixing issue caused by changing back queue lock. However, after legacy request IO path is killed, driver queue lock won't be used at all, and there isn't story for changing back queue lock. Then the issue addressed by Commit 498f6650aec8 doesn't exist any more. So move move blk_exit_queue into __blk_release_queue. This patch basically reverts the following two commits: 498f6650aec8 block: Fix a race between the cgroup code and request queue initialization 24ecc3585348 block: Ensure that a request queue is dissociated from the cgroup controller Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23blk-mq: fix hang caused by freeze/unfreeze sequenceBob Liu1-1/+2
The following is a description of a hang in blk_mq_freeze_queue_wait(). The hang happens on attempt to freeze a queue while another task does queue unfreeze. The root cause is an incorrect sequence of percpu_ref_resurrect() and percpu_ref_kill() and as a result those two can be swapped: CPU#0 CPU#1 ---------------- ----------------- q1 = blk_mq_init_queue(shared_tags) q2 = blk_mq_init_queue(shared_tags): blk_mq_add_queue_tag_set(shared_tags): blk_mq_update_tag_set_depth(shared_tags): list_for_each_entry() blk_mq_freeze_queue(q1) > percpu_ref_kill() > blk_mq_freeze_queue_wait() blk_cleanup_queue(q1) blk_mq_freeze_queue(q1) > percpu_ref_kill() ^^^^^^ freeze_depth can't guarantee the order blk_mq_unfreeze_queue() > percpu_ref_resurrect() > blk_mq_freeze_queue_wait() ^^^^^^ Hang here!!!! This wrong sequence raises kernel warning: percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release! WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0 But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(), which waits for a zero of a q_usage_counter, which never happens because percpu-ref was reinited (instead of being killed) and stays in PERCPU state forever. How to reproduce: - "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2" - cpu0: python Script.py 0; taskset the corresponding process running on cpu0 - cpu1: python Script.py 1; taskset the corresponding process running on cpu1 Script.py: ------ #!/usr/bin/python3 import os import sys while True: on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1] off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1] os.system(on) os.system(off) ------ This bug was first reported and fixed by Roman, previous discussion: [1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com [2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org [3] https://patchwork.kernel.org/patch/9268199/ Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04block: don't drain in-progress dispatch in blk_cleanup_queue()Ming Lei1-12/+0
Now freeing hw queue resource is moved to hctx's release handler, we don't need to worry about the race between blk_cleanup_queue and run queue any more. So don't drain in-progress dispatch in blk_cleanup_queue(). This is basically revert of c2856ae2f315 ("blk-mq: quiesce queue before freeing queue"). Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_releaseMing Lei1-8/+0
hctx is always released after requeue is freed. With holding queue's kobject refcount, it is safe for driver to run queue, so one run queue might be scheduled after blk_sync_queue() is done. So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release() for avoiding run released queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: free hw queue's resource in hctx's release handlerMing Lei1-1/+1
Once blk_cleanup_queue() returns, tags shouldn't be used any more, because blk_mq_free_tag_set() may be called. Commit 45a9c9d909b2 ("blk-mq: Fix a use-after-free") fixes this issue exactly. However, that commit introduces another issue. Before 45a9c9d909b2, we are allowed to run queue during cleaning up queue if the queue's kobj refcount is held. After that commit, queue can't be run during queue cleaning up, otherwise oops can be triggered easily because some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue(). We have invented ways for addressing this kind of issue before, such as: 8dc765d438f1 ("SCSI: fix queue cleanup race before queue initialization is done") c2856ae2f315 ("blk-mq: quiesce queue before freeing queue") But still can't cover all cases, recently James reports another such kind of issue: https://marc.info/?l=linux-scsi&m=155389088124782&w=2 This issue can be quite hard to address by previous way, given scsi_run_queue() may run requeues for other LUNs. Fixes the above issue by freeing hctx's resources in its release handler, and this way is safe becasue tags isn't needed for freeing such hctx resource. This approach follows typical design pattern wrt. kobject's release handler. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reported-by: James Smart <james.smart@broadcom.com> Fixes: 45a9c9d909b2 ("blk-mq: Fix a use-after-free") Cc: stable@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: move cancel of requeue_work into blk_mq_releaseMing Lei1-1/+0
With holding queue's kobject refcount, it is safe for driver to schedule requeue. However, blk_mq_kick_requeue_list() may be called after blk_sync_queue() is done because of concurrent requeue activities, then requeue work may not be completed when freeing queue, and kernel oops is triggered. So moving the cancel of requeue_work into blk_mq_release() for avoiding race between requeue and freeing queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig1-0/+1
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05block: Revert v5.0 blk_mq_request_issue_directly() changesBart Van Assche1-3/+1
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that have been queued. If that happens when blk_mq_try_issue_directly() is called by the dm-mpath driver then dm-mpath will try to resubmit a request that is already queued and a kernel crash follows. Since it is nontrivial to fix blk_mq_request_issue_directly(), revert the blk_mq_request_issue_directly() changes that went into kernel v5.0. This patch reverts the following commits: * d6a51a97c0b2 ("blk-mq: replace and kill blk_mq_request_issue_directly") # v5.0. * 5b7a6f128aad ("blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests") # v5.0. * 7f556a44e61d ("blk-mq: refactor the code of issue request directly") # v5.0. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: James Smart <james.smart@broadcom.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Fixes: 7f556a44e61d ("blk-mq: refactor the code of issue request directly") # v5.0. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-12mm: refactor readahead defines in mm.hNikolay Borisov1-2/+1
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This simplifies the expression in every filesystem. Also rename the macro to VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused VM_MIN_READAHEAD [akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen] Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: David Howells <dhowells@redhat.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-30block: pass no-op callback to INIT_WORK().Tetsuo Handa1-1/+5
syzbot is hitting flush_work() warning caused by commit 4d43d395fed12463 ("workqueue: Try to catch flush_work() without INIT_WORK().") [1]. Although that commit did not expect INIT_WORK(NULL) case, calling flush_work() without setting a valid callback should be avoided anyway. Fix this problem by setting a no-op callback instead of NULL. [1] https://syzkaller.appspot.com/bug?id=e390366bc48bc82a7c668326e0663be3b91cbd29 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-and-tested-by: syzbot <syzbot+ba2a929dcf8e704c180e@syzkaller.appspotmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-27Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"Jens Axboe1-11/+0
We can't touch a bio after ->make_request_fn(), for all we know it could already have been completed by the time this function returns. This reverts commit 698cef173983b086977e633e46476e0f925ca01e. Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22block: cover another queue enter recursion via BIO_QUEUE_ENTEREDMing Lei1-0/+11
Except for blk_queue_split(), bio_split() is used for splitting bio too, then the remained bio is often resubmit to queue via generic_make_request(). So the same queue enter recursion exits in this case too. Unfortunatley commit cd4a4ae4683dc2 doesn't help this case. This patch covers the above case by setting BIO_QUEUE_ENTERED before calling q->make_request_fn. In theory the per-bio flag is used to simulate one stack variable, it is just fine to clear it after q->make_request_fn is returned. Especially the same bio can't be submitted from another context. Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits") Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: NeilBrown <neilb@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09block: fix kerneldoc comment for blk_attempt_plug_merge()Jonathan Corbet1-1/+0
Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed the request_count parameter from block_attempt_plug_merge(), but did not remove the associated kerneldoc comment, introducing this warning to the docs build: ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge' Remove the obsolete description and make things a little quieter. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08block: clarify documentation for blk_{start|finish}_plugJeff Moyer1-0/+19
There was some confusion about what these functions did. Make it clear that this is a hint for upper layers to pass to the block layer, and that it does not guarantee that I/O will not be submitted between a start and finish plug. Reported-by: "Darrick J. Wong" <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16block: clear REQ_HIPRI if polling is not supportedChristoph Hellwig1-0/+3
This prevents a HIPRI bio from being submitted through a stacking driver that does not support polling and thus won't poll for I/O completion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16blk-mq: replace and kill blk_mq_request_issue_directlyJianchao Wang1-1/+3
Replace blk_mq_request_issue_directly with blk_mq_try_issue_directly in blk_insert_cloned_request and kill it as nobody uses it any more. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: delete part_round_stats and switch to less precise countingMikulas Patocka1-58/+4
We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: stop passing 'cpu' to all percpu stats methodsMike Snitzer1-19/+15
All of part_stat_* and related methods are used with preempt disabled, so there is no need to pass cpu around to allow of them. Just call smp_processor_id() as needed. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04block: remove ->poll_fnChristoph Hellwig1-23/+0
This was intended to support users like nvme multipath, but is just getting in the way and adding another indirect call. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-01block: add cmd_flags to print_req_errorBalbir Singh1-4/+5
I ran into a bug where after hibernation due to incompatible backends, the block driver returned BLK_STS_NOTSUPP, with the current message it's hard to find out what the command flags were. Adding req->cmd_flags help make the problem easier to diagnose. Reviewed-by: Eduardo Valentin <eduval@amazon.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29blk-mq: use bd->last == true for list insertsJens Axboe1-1/+1
If we are issuing a list of requests, we know if we're at the last one. If we fail issuing, ensure that we call ->commits_rqs() to flush any potential previous requests. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29block: improve logic around when to sort a plug listJens Axboe1-0/+1
Only do it if we have requests for multiple queues in the same plug. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: sum requests in the plug structureJens Axboe1-26/+4
This isn't exactly the same as the previous count, as it includes requests for all devices. But that really doesn't matter, if we have more than the threshold (16) queued up, flush it. It's not worth it to have an expensive list loop for this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: make blk_poll() take a parameter on whether to spin or notJens Axboe1-3/+6
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26blk-mq: when polling for IO, look for any completionJens Axboe1-2/+11
If we want to support async IO polling, then we have to allow finding completions that aren't just for the one we are looking for. Always pass in -1 to the mq_ops->poll() helper, and have that return how many events were found in this poll loop. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: Initialize BIO I/O priority earlyDamien Le Moal1-4/+1
For the synchronous I/O path case (read(), write() etc system calls), a BIO I/O priority is not initialized until the execution of blk_init_request_from_bio() when the BIO is submitted and a request initialized for the BIO execution. This is due to the ki_ioprio field of the struct kiocb defined on stack being always initialized to IOPRIO_CLASS_NONE, regardless of the calling process I/O context ioprio value set with ioprio_set(). This late initialization can result in the BIO being merged to pending requests even when the I/O priorities differ. Fix this by initializing the ki_iopriority field of on stack struct kiocb using the get_current_ioprio() helper, ensuring that all BIOs allocated and submitted for the system call execution see the correct intended I/O priority early. With this, since a BIO I/O priority is always set to the intended effective value for both the sync and async path, blk_init_request_from_bio() can be simplified. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: prevent merging of requests with different prioritiesDamien Le Moal1-3/+0
Growing in size a high priority request by merging it with a lower priority BIO or request will increase the request execution time. This is the opposite result of the desired effect of high I/O priorities, namely getting low I/O latencies. Prevent merging of requests and BIOs that have different I/O priorities to fix this. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: Introduce get_current_ioprio()Damien Le Moal1-5/+1
Define get_current_ioprio() as an inline helper to obtain the caller I/O priority from its task I/O context. Use this helper in blk_init_request_from_bio() to set a request ioprio. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: Remove bio->bi_iocDamien Le Moal1-1/+1
bio->bi_ioc is never set so always NULL. Remove references to it in bio_disassociate_task() and in rq_ioc() and delete this field from struct bio. With this change, rq_ioc() always returns current->io_context without the need for a bio argument. Further simplify the code and make it more readable by also removing this helper, which also allows to simplify blk_mq_sched_assign_ioc() by removing its bio argument. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-18Merge tag 'v4.20-rc3' into for-4.21/blockJens Axboe1-3/+2
Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: add queue_is_mq() helperJens Axboe1-6/+6
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the queue_lock indirectionChristoph Hellwig1-9/+1
With the legacy request path gone there is no good reason to keep queue_lock as a pointer, we can always use the embedded lock now. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixed floppy and blk-cgroup missing conversions and half done edits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the lock argument to blk_alloc_queue_nodeChristoph Hellwig1-13/+3
With the legacy request path gone there is no real need to override the queue_lock. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: use atomic bitops for ->queue_flagsChristoph Hellwig1-47/+7
->queue_flags is generally not set or cleared in the fast path, and also generally set or cleared one flag at a time. Make use of the normal atomic bitops for it so that we don't need to take the queue_lock, which is otherwise mostly unused in the core block layer now. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove QUEUE_FLAG_BYPASS and ->bypassChristoph Hellwig1-21/+0
Unused since the removal of the legacy request code. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>