summaryrefslogtreecommitdiffstats
path: root/block/blk-core.c
AgeCommit message (Collapse)AuthorFilesLines
2016-09-14block: add poll_considered statisticStephen Bates1-2/+6
In order to help determine the effectiveness of polling in a running system it is usful to determine the ratio of how often the poll function is called vs how often the completion is checked. For this reason we add a poll_considered variable and add it to the sysfs entry for io_poll. Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-29blk-mq: turn hctx->run_work into a regular work structJens Axboe1-1/+1
We don't need the larger delayed work struct, since we always run it immediately. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-29block: add kblockd_schedule_work_on()Jens Axboe1-0/+6
Add a helper to schedule a regular struct work on a particular CPU. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16block: Fix race triggered by blk_set_queue_dying()Bart Van Assche1-1/+3
blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe1-13/+13
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-72/+25
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-20scsi/osd: open code blk_make_requestChristoph Hellwig1-57/+0
I wish the OSD code could simply use blk_rq_map_* helpers like everyone else, but the complex nature of deciding if we have DATA IN and/or DATA OUT buffers might make this impossible (at least for a mere human like me). But using blk_rq_append_bio at least allows sharing the setup code between request with or without dat a buffers, and given that this is the last user of blk_make_request it allows getting rid of that somewhat awkward interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Boaz Harrosh <ooo@electrozaur.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: simplify and export blk_rq_append_bioChristoph Hellwig1-1/+1
The target SCSI passthrough backend is much better served with the low-level blk_rq_append_bio construct then the helpers built on top of it, so export it. Also use the opportunity to remove the pointless request_queue argument and make the code flow a little more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: ensure bios return from blk_get_request are properly initializedChristoph Hellwig1-5/+7
blk_get_request is used for BLOCK_PC and similar passthrough requests. Currently we always need to call blk_rq_set_block_pc or an open coded version of it to allow appending bios using the request mapping helpers later on, which is a somewhat awkward API. Instead move the initialization part of blk_rq_set_block_pc into blk_get_request, so that we always have a safe to use request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05block: Export blk_pollSagi Grimberg1-0/+1
The new NVMe over fabrics target will make use of this outside from a module. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09cfq-iosched: temporarily boost queue priority for idle classesJens Axboe1-0/+5
If we're queuing REQ_PRIO IO and the task is running at an idle IO class, then temporarily boost the priority. This prevents livelocks due to priority inversion, when a low priority task is holding file system resources while attempting to do IO. An example of that is shown below. An ioniced idle task is holding the directory mutex, while a normal priority task is trying to do a directory lookup. [478381.198925] ------------[ cut here ]------------ [478381.200315] INFO: task ionice:1168369 blocked for more than 120 seconds. [478381.201324] Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1 [478381.202278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [478381.203462] ionice D ffff8803692736a8 0 1168369 1 0x00000080 [478381.203466] ffff8803692736a8 ffff880399c21300 ffff880276adcc00 ffff880369273698 [478381.204589] ffff880369273fd8 0000000000000000 7fffffffffffffff 0000000000000002 [478381.205752] ffffffff8177d5e0 ffff8803692736c8 ffffffff8177cea7 0000000000000000 [478381.206874] Call Trace: [478381.207253] [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80 [478381.208175] [<ffffffff8177cea7>] schedule+0x37/0x90 [478381.208932] [<ffffffff8177f5fc>] schedule_timeout+0x1dc/0x250 [478381.209805] [<ffffffff81421c17>] ? __blk_run_queue+0x37/0x50 [478381.210706] [<ffffffff810ca1c5>] ? ktime_get+0x45/0xb0 [478381.211489] [<ffffffff8177c407>] io_schedule_timeout+0xa7/0x110 [478381.212402] [<ffffffff810a8c2b>] ? prepare_to_wait+0x5b/0x90 [478381.213280] [<ffffffff8177d616>] bit_wait_io+0x36/0x50 [478381.214063] [<ffffffff8177d325>] __wait_on_bit+0x65/0x90 [478381.214961] [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80 [478381.215872] [<ffffffff8177d47c>] out_of_line_wait_on_bit+0x7c/0x90 [478381.216806] [<ffffffff810a89f0>] ? wake_atomic_t_function+0x40/0x40 [478381.217773] [<ffffffff811f03aa>] __wait_on_buffer+0x2a/0x30 [478381.218641] [<ffffffff8123c557>] ext4_bread+0x57/0x70 [478381.219425] [<ffffffff8124498c>] __ext4_read_dirblock+0x3c/0x380 [478381.220467] [<ffffffff8124665d>] ext4_dx_find_entry+0x7d/0x170 [478381.221357] [<ffffffff8114c49e>] ? find_get_entry+0x1e/0xa0 [478381.222208] [<ffffffff81246bd4>] ext4_find_entry+0x484/0x510 [478381.223090] [<ffffffff812471a2>] ext4_lookup+0x52/0x160 [478381.223882] [<ffffffff811c401d>] lookup_real+0x1d/0x60 [478381.224675] [<ffffffff811c4698>] __lookup_hash+0x38/0x50 [478381.225697] [<ffffffff817745bd>] lookup_slow+0x45/0xab [478381.226941] [<ffffffff811c690e>] link_path_walk+0x7ae/0x820 [478381.227880] [<ffffffff811c6a42>] path_init+0xc2/0x430 [478381.228677] [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20 [478381.229776] [<ffffffff811c8c57>] path_openat+0x77/0x620 [478381.230767] [<ffffffff81185c6e>] ? page_add_file_rmap+0x2e/0x70 [478381.232019] [<ffffffff811cb253>] do_filp_open+0x43/0xa0 [478381.233016] [<ffffffff8108c4a9>] ? creds_are_invalid+0x29/0x70 [478381.234072] [<ffffffff811c0cb0>] do_open_execat+0x70/0x170 [478381.235039] [<ffffffff811c1bf8>] do_execveat_common.isra.36+0x1b8/0x6e0 [478381.236051] [<ffffffff811c214c>] do_execve+0x2c/0x30 [478381.236809] [<ffffffff811ca392>] ? getname+0x12/0x20 [478381.237564] [<ffffffff811c23be>] SyS_execve+0x2e/0x40 [478381.238338] [<ffffffff81780a1d>] stub_execve+0x6d/0xa0 [478381.239126] ------------[ cut here ]------------ [478381.239915] ------------[ cut here ]------------ [478381.240606] INFO: task python2.7:1168375 blocked for more than 120 seconds. [478381.242673] Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1 [478381.243653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [478381.244902] python2.7 D ffff88005cf8fb98 0 1168375 1168248 0x00000080 [478381.244904] ffff88005cf8fb98 ffff88016c1f0980 ffffffff81c134c0 ffff88016c1f11a0 [478381.246023] ffff88005cf8ffd8 ffff880466cd0cbc ffff88016c1f0980 00000000ffffffff [478381.247138] ffff880466cd0cc0 ffff88005cf8fbb8 ffffffff8177cea7 ffff88005cf8fcc8 [478381.248252] Call Trace: [478381.248630] [<ffffffff8177cea7>] schedule+0x37/0x90 [478381.249382] [<ffffffff8177d08e>] schedule_preempt_disabled+0xe/0x10 [478381.250465] [<ffffffff8177e892>] __mutex_lock_slowpath+0x92/0x100 [478381.251409] [<ffffffff8177e91b>] mutex_lock+0x1b/0x2f [478381.252199] [<ffffffff817745ae>] lookup_slow+0x36/0xab [478381.253023] [<ffffffff811c690e>] link_path_walk+0x7ae/0x820 [478381.253877] [<ffffffff811aeb41>] ? try_charge+0xc1/0x700 [478381.254690] [<ffffffff811c6a42>] path_init+0xc2/0x430 [478381.255525] [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20 [478381.256450] [<ffffffff811c8c57>] path_openat+0x77/0x620 [478381.257256] [<ffffffff8115b2fb>] ? lru_cache_add_active_or_unevictable+0x2b/0xa0 [478381.258390] [<ffffffff8117b623>] ? handle_mm_fault+0x13f3/0x1720 [478381.259309] [<ffffffff811cb253>] do_filp_open+0x43/0xa0 [478381.260139] [<ffffffff811d7ae2>] ? __alloc_fd+0x42/0x120 [478381.260962] [<ffffffff811b95ac>] do_sys_open+0x13c/0x230 [478381.261779] [<ffffffff81011393>] ? syscall_trace_enter_phase1+0x113/0x170 [478381.262851] [<ffffffff811b96c2>] SyS_open+0x22/0x30 [478381.263598] [<ffffffff81780532>] system_call_fastpath+0x12/0x17 [478381.264551] ------------[ cut here ]------------ [478381.265377] ------------[ cut here ]------------ Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
2016-06-09block: add a separate operation type for secure eraseChristoph Hellwig1-10/+17
Instead of overloading the discard support with the REQ_SECURE flag. Use the opportunity to rename the queue flag as well, and remove the dead checks for this flag in the RAID 1 and RAID 10 drivers that don't claim support for secure erase. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie1-6/+6
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, fs: shrink bi_rw from long to intMike Christie1-1/+1
We don't need bi_rw to be so large on 64 bit archs, so reduce it to unsigned int. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: convert is_sync helpers to use REQ_OPs.Mike Christie1-3/+3
This patch converts the is_sync helpers to use separate variables for the operation and flags. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: convert merge/insert code to check for REQ_OPs.Mike Christie1-1/+1
This patch converts the block layer merging code to use separate variables for the operation and flags, and to check req_op for the REQ_OP. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: prepare elevator to use REQ_OPs.Mike Christie1-1/+1
This patch converts the elevator code to use separate variables for the operation and flags, and to check req_op for the REQ_OP. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: prepare request creation/destruction code to use REQ_OPsMike Christie1-25/+29
This patch prepares *_get_request/*_put_request and freed_request, to use separate variables for the operation and flags. In the next patches the struct request users will be converted like was done for bios where the op and flags are set separately. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: copy bio op to request opMike Christie1-3/+3
The bio users should now always be setting up the bio op. This patch has the block layer copy that to the request. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie1-3/+3
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, cgroup: use op_is_write helper instead of checking for REQ_WRITEMike Christie1-2/+2
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This patch converts the drivers and cgroup to use the op_is_write helper. This should just cover the simple cases. I did dm, md and bcache in their own patches because they were more involved. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie1-7/+4
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13block: kill off q->flush_flagsJens Axboe1-1/+2
Now that we converted everything to the newer block write cache interface, kill off the queue flush_flags and queueable flush entries. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: add offset in blk_add_request_payload()Ming Lin1-2/+3
We could kmalloc() the payload, so need the offset in page. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-1/+1
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18Merge branch 'for-4.6' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - ahci grew runtime power management support so that the controller can be turned off if no devices are attached. - sata_via isn't dead yet. It got hotplug support and more refined workaround for certain WD drives. - Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing conflicts in ahci PCI ID table. * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_xgene: dereferencing uninitialized pointer in probe AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs ata: sata_rcar: Use ARCH_RENESAS sata_via: Implement hotplug for VT6421 sata_via: Apply WD workaround only when needed on VT6421 ahci: Add runtime PM support for the host controller ahci: Add functions to manage runtime PM of AHCI ports ahci: Convert driver to use modern PM hooks ahci: Cache host controller version scsi: Drop runtime PM usage count after host is added scsi: Set request queue runtime PM status back to active on resume block: Add blk_set_runtime_active() ata: ahci_mvebu: add support for Armada 3700 variant libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show() libata: support AHCI on OCTEON platform
2016-02-22dm: fix excessive dm-mq context switchingMike Snitzer1-1/+1
Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower than if an underlying null_blk device were used directly. One of the reasons for this drop in performance is that blk_insert_clone_request() was calling blk_mq_insert_request() with @async=true. This forced the use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues which ushered in ping-ponging between process context (fio in this case) and kblockd's kworker to submit the cloned request. The ftrace function_graph tracer showed: kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to _not_ use kblockd to submit the cloned requests isn't enough to eliminate the observed context switches. In addition to this dm-mq specific blk-core fix, there are 2 DM core fixes to dm-mq that (when paired with the blk-core fix) completely eliminate the observed context switching: 1) don't blk_mq_run_hw_queues in blk-mq request completion Motivated by desire to reduce overhead of dm-mq, punting to kblockd just increases context switches. In my testing against a really fast null_blk device there was no benefit to running blk_mq_run_hw_queues() on completion (and no other blk-mq driver does this). So hopefully this change doesn't induce the need for yet another revert like commit 621739b00e16ca2d ! 2) use blk_mq_complete_request() in dm_complete_request() blk_complete_request() doesn't offer the traditional q->mq_ops vs .request_fn branching pattern that other historic block interfaces do (e.g. blk_get_request). Using blk_mq_complete_request() for blk-mq requests is important for performance. It should be noted that, like blk_complete_request(), blk_mq_complete_request() doesn't natively handle partial completions -- but the request-based DM-multipath target does provide the required partial completion support by dm.c:end_clone_bio() triggering requeueing of the request via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE. dm-mq fix #2 is _much_ more important than #1 for eliminating the context switches. Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475 After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472 With these changes multithreaded async read IOPs improved from ~950K to ~1350K for this dm-mq stacked on null_blk test-case. The raw read IOPs of the underlying null_blk device for the same workload is ~1950K. Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()") Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM") Cc: stable@vger.kernel.org # 4.1+ Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk>
2016-02-19block: Add blk_set_runtime_active()Mika Westerberg1-0/+24
If block device is left runtime suspended during system suspend, resume hook of the driver typically corrects runtime PM status of the device back to "active" after it is resumed. However, this is not enough as queue's runtime PM status is still "suspended". As long as it is in this state blk_pm_peek_request() returns NULL and thus prevents new requests to be processed. Add new function blk_set_runtime_active() that can be used to force the queue status back to "active" as needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-04Merge remote-tracking branch 'mkp-scsi/4.5/scsi-fixes' into fixesJames Bottomley1-2/+4
2016-02-04block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabledMartin K. Petersen1-2/+4
When a storage device rejects a WRITE SAME command we will disable write same functionality for the device and return -EREMOTEIO to the block layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or failing the path. Yiwen Jiang discovered a small race where WRITE SAME requests issued simultaneously would cause -EIO to be returned. This happened because any requests being prepared after WRITE SAME had been disabled for the device caused us to return BLKPREP_KILL. The latter caused the block layer to return -EIO upon completion. To overcome this we introduce BLKPREP_INVALID which indicates that this is an invalid request for the device. blk_peek_request() is modified to return -EREMOTEIO in that case. Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Suggested-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-21Merge branch 'for-4.5/nvme' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+8
Pull NVMe updates from Jens Axboe: "Last branch for this series is the nvme changes. It's in a separate branch to avoid splitting too much between core and NVMe changes, since NVMe is still helping drive some blk-mq changes. That said, not a huge amount of core changes in here. The grunt of the work is the continued split of the code" * 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits) uapi: update install list after nvme.h rename NVMe: Export NVMe attributes to sysfs group NVMe: Shutdown controller only for power-off NVMe: IO queue deletion re-write NVMe: Remove queue freezing on resets NVMe: Use a retryable error code on reset NVMe: Fix admin queue ring wrap nvme: make SG_IO support optional nvme: fixes for NVME_IOCTL_IO_CMD on the char device nvme: synchronize access to ctrl->namespaces nvme: Move nvme_freeze/unfreeze_queues to nvme core PCI/AER: include header file NVMe: Export namespace attributes to sysfs NVMe: Add pci error handlers block: remove REQ_NO_TIMEOUT flag nvme: merge iod and cmd_info nvme: meta_sg doesn't have to be an array nvme: properly free resources for cancelled command nvme: simplify completion handling nvme: special case AEN requests ...
2016-01-19Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-7/+8
Pull core block updates from Jens Axboe: "We don't have a lot of core changes this time around, it's mostly in drivers, which will come in a subsequent pull. The cores changes include: - blk-mq - Prep patch from Christoph, changing blk_mq_alloc_request() to take flags instead of just using gfp_t for sleep/nosleep. - Doc patch from me, clarifying the difference between legacy and blk-mq for timer usage. - Fixes from Raghavendra for memory-less numa nodes, and a reuse of CPU masks. - Cleanup from Geliang Tang, using offset_in_page() instead of open coding it. - From Ilya, rename request_queue slab to it reflects what it holds, and a fix for proper use of bdgrab/put. - A real fix for the split across stripe boundaries from Keith. We yanked a broken version of this from 4.4-rc final, this one works. - From Mike Krinkin, emit a trace message when we split. - From Wei Tang, two small cleanups, not explicitly clearing memory that is already cleared" * 'for-4.5/core' of git://git.kernel.dk/linux-block: block: use bd{grab,put}() instead of open-coding block: split bios to max possible length block: add call to split trace point blk-mq: Avoid memoryless numa node encoded in hctx numa_node blk-mq: Reuse hardware context cpumask for tags blk-mq: add a flags parameter to blk_mq_alloc_request Revert "blk-flush: Queue through IO scheduler when flush not required" block: clarify blk_add_timer() use case for blk-mq bio: use offset_in_page macro block: do not initialise statics to 0 or NULL block: do not initialise globals to 0 or NULL block: rename request_queue slab cache
2015-12-28block: add blk_start_queue_async()Jens Axboe1-0/+16
We currently only have an inline/sync helper to restart a stopped queue. If drivers need an async version, they have to roll their own. Add a generic helper instead. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22block: ensure to split after potentially bouncing a bioJunichi Nomura1-2/+2
blk_queue_bio() does split then bounce, which makes the segment counting based on pages before bouncing and could go wrong. Move the split to after bouncing, like we do for blk-mq, and the we fix the issue of having the bio count for segments be wrong. Fixes: 54efd50bfd87 ("block: make generic_make_request handle arbitrarily sized bios") Cc: stable@vger.kernel.org Tested-by: Artem S. Tashkinov <t.artem@lycos.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-22block: defer timeouts to a workqueueChristoph Hellwig1-0/+8
Timer context is not very useful for drivers to perform any meaningful abort action from. So instead of calling the driver from this useless context defer it to a workqueue as soon as possible. Note that while a delayed_work item would seem the right thing here I didn't dare to use it due to the magic in blk_add_timer that pokes deep into timer internals. But maybe this encourages Tejun to add a sensible API for that to the workqueue API and we'll all be fine in the end :) Contains a major update from Keith Bush: "This patch removes synchronizing the timeout work so that the timer can start a freeze on its own queue. The timer enters the queue, so timer context can only start a freeze, but not wait for frozen." Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-03SCSI: Fix NULL pointer dereference in runtime PMKen Xue1-0/+12
The routines in scsi_pm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by checking q->dev in block layer before handle runtime PM. Since ses doesn't define any PM callbacks and call blk_pm_runtime_init(), the crash won't occur. This fixes Bugzilla #101371. https://bugzilla.kernel.org/show_bug.cgi?id=101371 More discussion can be found from below link. http://marc.info/?l=linux-scsi&m=144163730531875&w=2 Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Xiangliang Yu <Xiangliang.Yu@amd.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Terry <Michael.terry@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-01blk-mq: add a flags parameter to blk_mq_alloc_requestChristoph Hellwig1-5/+6
We already have the reserved flag, and a nowait flag awkwardly encoded as a gfp_t. Add a real flags argument to make the scheme more extensible and allow for a nicer calling convention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29block: Always check queue limits for cloned requestsHannes Reinecke1-14/+7
When a cloned request is retried on other queues it always needs to be checked against the queue limits of that queue. Otherwise the calculations for nr_phys_segments might be wrong, leading to a crash in scsi_init_sgtable(). To clarify this the patch renames blk_rq_check_limits() to blk_cloned_rq_check_limits() and removes the symbol export, as the new function should only be used for cloned requests and never exported. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Fixes: e2a60da74 ("block: Clean up special command handling logic") Cc: stable@vger.kernel.org # 3.7+ Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-24block: do not initialise globals to 0 or NULLWei Tang1-1/+1
This patch fixes the checkpatch.pl error to blk-exec.c: ERROR: do not initialise globals to 0 or NULL Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-24block: rename request_queue slab cacheIlya Dryomov1-1/+1
Name the cache after the actual name of the struct. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11block: fix blk-core.c kernel-doc warningRandy Dunlap1-0/+3
Fix kernel-doc warning in blk-core.c: Warning(..//block/blk-core.c:1549): No description found for parameter 'same_queue_rq' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-10Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-blockLinus Torvalds1-10/+57
Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie
2015-11-07block: add block polling supportJens Axboe1-0/+41
Add basic support for polling for specific IO to complete. This uses the cookie that blk-mq passes back, which enables the block layer to pass this cookie to the driver to spin for a specific request. This will be combined with request latency tracking, so we can make qualified decisions about when to poll and when not to. For now, for benchmark purposes, we add a sysfs file that controls whether polling is enabled or not. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe1-10/+16
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman1-2/+2
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman1-8/+8
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-04Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-blockLinus Torvalds1-9/+65
Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
2015-11-04Merge branch 'for-4.4/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+29
Pull core block updates from Jens Axboe: "This is the core block pull request for 4.4. I've got a few more topic branches this time around, some of them will layer on top of the core+drivers changes and will come in a separate round. So not a huge chunk of changes in this round. This pull request contains: - Enable blk-mq page allocation tracking with kmemleak, from Catalin. - Unused prototype removal in blk-mq from Christoph. - Cleanup of the q->blk_trace exchange, using cmpxchg instead of two xchg()'s, from Davidlohr. - A plug flush fix from Jeff. - Also from Jeff, a fix that means we don't have to update shared tag sets at init time unless we do a state change. This cuts down boot times on thousands of devices a lot with scsi/blk-mq. - blk-mq waitqueue barrier fix from Kosuke. - Various fixes from Ming: - Fixes for segment merging and splitting, and checks, for the old core and blk-mq. - Potential blk-mq speedup by marking ctx pending at the end of a plug insertion batch in blk-mq. - direct-io no page dirty on kernel direct reads. - A WRITE_SYNC fix for mpage from Roman" * 'for-4.4/core' of git://git.kernel.dk/linux-block: blk-mq: avoid excessive boot delays with large lun counts blktrace: re-write setting q->blk_trace blk-mq: mark ctx as pending at batch in flush plug path blk-mq: fix for trace_block_plug() block: check bio_mergeable() early before merging blk-mq: check bio_mergeable() early before merging block: avoid to merge splitted bio block: setup bi_phys_segments after splitting block: fix plug list flushing for nomerge queues blk-mq: remove unused blk_mq_clone_flush_request prototype blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.c fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write block: kmemleak: Track the page allocations for struct request
2015-10-21block: fix plug list flushing for nomerge queuesJeff Moyer1-3/+29
Request queues with merging disabled will not flush the plug list after BLK_MAX_REQUEST_COUNT requests have been queued, since the code relies on blk_attempt_plug_merge to compute the request_count. Fix this by computing the number of queued requests even for nomerge queues. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: blk_flush_integrity() for bio-based driversDan Williams1-0/+3
Since they lack requests to pin the request_queue active, synchronous bio-based drivers may have in-flight integrity work from bio_integrity_endio() that is not flushed by blk_freeze_queue(). Flush that work to prevent races to free the queue and the final usage of the blk_integrity profile. This is temporary unless/until bio-based drivers start to generically take a q_usage_counter reference while a bio is in-flight. Cc: Martin K. Petersen <martin.petersen@oracle.com> [martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case] Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>