summaryrefslogtreecommitdiffstats
path: root/block/bfq-iosched.h
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19bfq: Relax waker detection for shared queuesJan Kara1-0/+1
Currently we look for waker only if current queue has no requests. This makes sense for bfq queues with a single process however for shared queues when there is a larger number of processes the condition that queue has no requests is difficult to meet because often at least one process has some request in flight although all the others are waiting for the waker to do the work and this harms throughput. Relax the "no queued request for bfq queue" condition to "the current task has no queued requests yet". For this, we also need to start tracking number of requests in flight for each task. This patch (together with the following one) restores the performance for dbench with 128 clients that regressed with commit c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting") because this commit makes requests of wakers properly enter BFQ queues and thus these queues become ineligible for the old waker detection logic. Dbench results: Vanilla 5.18-rc3 5.18-rc3 + revert 5.18-rc3 patched Mean 1237.36 ( 0.00%) 950.16 * 23.21%* 988.35 * 20.12%* Numbers are time to complete workload so lower is better. Fixes: c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220519105235.31397-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-02blktrace: cleanup the __trace_note_message interfaceChristoph Hellwig1-2/+2
Pass the cgroup_subsys_state instead of a the blkg so that blktrace doesn't need to poke into blk-cgroup internals, and give the name a blk prefix as the current name is way too generic for a public interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220420042723.1010598-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17bfq: Get rid of __bio_blkcg() usageJan Kara1-2/+1
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio would not be associated with any blkcg, the usage of __bio_blkcg() in BFQ is prone to races with the task being migrated between cgroups as __bio_blkcg() calls at different places could return different blkcgs. Convert BFQ to the new situation where bio->bi_blkg is initialized in bio_set_dev() and thus practically always valid. This allows us to save blkcg_gq lookup and noticeably simplify the code. CC: stable@vger.kernel.org Fixes: 0fe061b9f03c ("blkcg: fix ref count issue with bio_blkcg() using task_css") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17bfq: Track whether bfq_group is still onlineJan Kara1-0/+2
Track whether bfq_group is still online. We cannot rely on blkcg_gq->online because that gets cleared only after all policies are offlined and we need something that gets updated already under bfqd->lock when we are cleaning up our bfq_group to be able to guarantee that when we see online bfq_group, it will stay online while we are holding bfqd->lock lock. CC: stable@vger.kernel.org Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17bfq: Split shared queues on move between cgroupsJan Kara1-0/+1
When bfqq is shared by multiple processes it can happen that one of the processes gets moved to a different cgroup (or just starts submitting IO for different cgroup). In case that happens we need to split the merged bfqq as otherwise we will have IO for multiple cgroups in one bfqq and we will just account IO time to wrong entities etc. Similarly if the bfqq is scheduled to merge with another bfqq but the merge didn't happen yet, cancel the merge as it need not be valid anymore. CC: stable@vger.kernel.org Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-18block, bfq: cleanup bfq_bfqq_to_bfqg()Yu Kuai1-1/+0
Use bfq_group() instead, which do the same thing. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220129015924.3958918-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-11block: partition include/linux/blk-cgroup.hMing Lei1-1/+0
Partition include/linux/blk-cgroup.h into two parts: one is public part, the other is block layer private part. Suggested by Christoph Hellwig. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220211101149.2368042-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29bfq: Provide helper to generate bfqq nameJan Kara1-14/+13
Instead of having helper formating bfqq pid, provide a helper to generate full bfqq name as used in the traces. It saves some code duplication and will save more in the coming tracepoints. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-6-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29bfq: Limit waker detection in timeJan Kara1-0/+2
Currently, when process A starts issuing requests shortly after process B has completed some IO three times in a row, we decide that B is a "waker" of A meaning that completing IO of B is needed for A to make progress and generally stop separating A's and B's IO much. This logic is useful to avoid unnecessary idling and thus throughput loss for cases where workload needs to switch e.g. between the process and the journaling thread doing IO. However the detection heuristic tends to frequently give false positives when A and B are fighting IO bandwidth and other processes aren't doing much IO as we are basically deemed to eventually accumulate three occurences of a situation where one process starts issuing requests after the other has completed some IO. To reduce these false positives, cancel the waker detection also if we didn't accumulate three detected wakeups within given timeout. The rationale is that if wakeups are really rare, the pointless idling doesn't hurt throughput that much anyway. This significantly reduces false waker detection for workload like: [global] directory=/mnt/repro/ rw=write size=8g time_based runtime=30 ramp_time=10 blocksize=1m direct=0 ioengine=sync [slowwriter] numjobs=1 fsync=200 [fastwriter] numjobs=1 fsync=200 Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-5-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29bfq: Store full bitmap depth in bfq_dataJan Kara1-0/+1
Store bitmap depth shift inside bfq_data so that we can use it in bfq_limit_depth() for proportioning when limiting number of available request tags for a cgroup. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29bfq: Track number of allocated requests in bfq_entityJan Kara1-2/+3
When we want to limit number of requests used by each bfqq and also cgroup, we need to track also number of requests used by each cgroup. So track number of allocated requests for each bfq_entity. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-2-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25block, bfq: cleanup the repeated declarationShaokun Zhang1-2/+0
Function 'bfq_entity_to_bfqq' is declared twice, so remove the repeated declaration and blank line. Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1629872391-46399-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-18block: Introduce IOPRIO_NR_LEVELSDamien Le Moal1-2/+2
The BFQ scheduler and ioprio_check_cap() both assume that the RT priority class (IOPRIO_CLASS_RT) can have up to 8 different priority levels, similarly to the BE class (IOPRIO_CLASS_iBE). This is controlled using the IOPRIO_BE_NR macro , which is badly named as the number of levels also applies to the RT class. Introduce the class independent IOPRIO_NR_LEVELS macro, defined to 8, to make things clear. Keep the old IOPRIO_BE_NR macro definition as an alias for IOPRIO_NR_LEVELS. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210811033702.368488-6-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-25block, bfq: merge bursts of newly-created queuesPaolo Valente1-0/+15
Many throughput-sensitive workloads are made of several parallel I/O flows, with all flows generated by the same application, or more generically by the same task (e.g., system boot). The most counterproductive action with these workloads is plugging I/O dispatch when one of the bfq_queues associated with these flows remains temporarily empty. To avoid this plugging, BFQ has been using a burst-handling mechanism for years now. This mechanism has proven effective for throughput, and not detrimental for service guarantees. This commit pushes this mechanism a little bit further, basing on the following two facts. First, all the I/O flows of a the same application or task contribute to the execution/completion of that common application or task. So the performance figures that matter are total throughput of the flows and task-wide I/O latency. In particular, these flows do not need to be protected from each other, in terms of individual bandwidth or latency. Second, the above fact holds regardless of the number of flows. Putting these two facts together, this commits merges stably the bfq_queues associated with these I/O flows, i.e., with the processes that generate these IO/ flows, regardless of how many the involved processes are. To decide whether a set of bfq_queues is actually associated with the I/O flows of a common application or task, and to merge these queues stably, this commit operates as follows: given a bfq_queue, say Q2, currently being created, and the last bfq_queue, say Q1, created before Q2, Q2 is merged stably with Q1 if - very little time has elapsed since when Q1 was created - Q2 has the same ioprio as Q1 - Q2 belongs to the same group as Q1 Merging bfq_queues also reduces scheduling overhead. A fio test with ten random readers on /dev/nullb shows a throughput boost of 40%, with a quadcore. Since BFQ's execution time amounts to ~50% of the total per-request processing time, the above throughput boost implies that BFQ's overhead is reduced by more than 50%. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Link: https://lore.kernel.org/r/20210304174627.161-7-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block, bfq: make waker-queue detection more robustPaolo Valente1-2/+5
In the presence of many parallel I/O flows, the detection of waker bfq_queues suffers from false positives. This commits addresses this issue by making the filtering of actual wakers more selective. In more detail, a candidate waker must be found to meet waker requirements three times before being promoted to actual waker. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block, bfq: save also injection state on queue mergingPaolo Valente1-0/+5
To prevent injection information from being lost on bfq_queue merging, also the amount of service that a bfq_queue receives must be saved and restored when the bfq_queue is merged and split, respectively. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block, bfq: save also weight-raised service on queue mergingPaolo Valente1-0/+1
To prevent weight-raising information from being lost on bfq_queue merging, also the amount of service that a bfq_queue receives must be saved and restored when the bfq_queue is merged and split, respectively. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block, bfq: replace mechanism for evaluating I/O intensityPaolo Valente1-8/+8
Some BFQ mechanisms make their decisions on a bfq_queue basing also on whether the bfq_queue is I/O bound. In this respect, the current logic for evaluating whether a bfq_queue is I/O bound is rather rough. This commits replaces this logic with a more effective one. The new logic measures the percentage of time during which a bfq_queue is active, and marks the bfq_queue as I/O bound if the latter if this percentage is above a fixed threshold. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-18bfq: fix blkio cgroup leakage v4Dmitry Monakhov1-1/+0
Changes from v1: - update commit description with proper ref-accounting justification commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") introduce leak forbfq_group and blkcg_gq objects because of get/put imbalance. In fact whole idea of original commit is wrong because bfq_group entity can not dissapear under us because it is referenced by child bfq_queue's entities from here: -> bfq_init_entity() ->bfqg_and_blkg_get(bfqg); ->entity->parent = bfqg->my_entity -> bfq_put_queue(bfqq) FINAL_PUT ->bfqg_and_blkg_put(bfqq_group(bfqq)) ->kmem_cache_free(bfq_pool, bfqq); So parent entity can not disappear while child entity is in tree, and child entities already has proper protection. This patch revert commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") bfq_group leak trace caused by bad commit: -> blkg_alloc -> bfq_pq_alloc -> bfqg_get (+1) ->bfq_activate_bfqq ->bfq_activate_requeue_entity -> __bfq_activate_entity ->bfq_get_entity ->bfqg_and_blkg_get (+1) <==== : Note1 ->bfq_del_bfqq_busy ->bfq_deactivate_entity+0x53/0xc0 [bfq] ->__bfq_deactivate_entity+0x1b8/0x210 [bfq] -> bfq_forget_entity(is_in_service = true) entity->on_st_or_in_serv = false <=== :Note2 if (is_in_service) return; ==> do not touch reference -> blkcg_css_offline -> blkcg_destroy_blkgs -> blkg_destroy -> bfq_pd_offline -> __bfq_deactivate_entity if (!entity->on_st_or_in_serv) /* true, because (Note2) return false; -> bfq_pd_free -> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2) So bfq_group and blkcg_gq will leak forever, see test-case below. ##TESTCASE_BEGIN: #!/bin/bash max_iters=${1:-100} #prep cgroup mounts mount -t tmpfs cgroup_root /sys/fs/cgroup mkdir /sys/fs/cgroup/blkio mount -t cgroup -o blkio none /sys/fs/cgroup/blkio # Prepare blkdev grep blkio /proc/cgroups truncate -s 1M img losetup /dev/loop0 img echo bfq > /sys/block/loop0/queue/scheduler grep blkio /proc/cgroups for ((i=0;i<max_iters;i++)) do mkdir -p /sys/fs/cgroup/blkio/a echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null echo 0 > /sys/fs/cgroup/blkio/cgroup.procs rmdir /sys/fs/cgroup/blkio/a grep blkio /proc/cgroups done ##TESTCASE_END: Fixes: db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-21block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroupPaolo Valente1-0/+1
A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The goal of this put is to release a process reference to a bfq_queue. But process-reference releases may trigger also some extra operation, and, to this goal, are handled through bfq_release_process_ref(). So, turn the invocation of bfq_put_queue() into an invocation of bfq_release_process_ref(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-03block, bfq: get a ref to a group when adding it to a service treePaolo Valente1-0/+1
BFQ schedules generic entities, which may represent either bfq_queues or groups of bfq_queues. When an entity is inserted into a service tree, a reference must be taken, to make sure that the entity does not disappear while still referred in the tree. Unfortunately, such a reference is mistakenly taken only if the entity represents a bfq_queue. This commit takes a reference also in case the entity represents a group. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Chris Evich <cevich@redhat.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-03block, bfq: remove ifdefs from around gets/puts of bfq groupsPaolo Valente1-0/+1
ifdefs around gets and puts of bfq groups reduce readability, remove them. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-03block, bfq: extend incomplete name of field on_stPaolo Valente1-1/+1
The flag on_st in the bfq_entity data structure is true if the entity is on a service tree or is in service. Yet the name of the field, confusingly, does not mention the second, very important case. Extend the name to mention the second case too. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-20block,bfq: Skip tracing hooks if possibleDmitry Monakhov1-0/+4
In most cases blk_tracing is not active, but bfq_log_bfqq macro generate pid_str unconditionally, which result in significant overhead. ## Test modprobe null_blk echo bfq > /sys/block/nullb0/queue/scheduler fio --name=t --ioengine=libaio --direct=1 --filename=/dev/nullb0 \ --runtime=30 --time_based=1 --rw=write --iodepth=128 --bs=4k # Results | | baseline | w/ patch | gain | | iops | 113.19K | 126.42K | +11% | Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTATTejun Heo1-0/+2
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on cgroup1. Let's move it into its own files and gate it behind a config option. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07bfq-iosched: stop using blkg->stat_bytes and ->stat_iosTejun Heo1-0/+4
When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios from blk-cgroup core to populate six stat knobs. blk-cgroup core is moving away from blkg_rwstat to improve scalability and won't be able to support this usage. It isn't like the sharing gains all that much. Let's break it out to dedicated rwstat counters which are updated when on cgroup1. This makes use of bfqg_*rwstat*() helpers outside of CONFIG_BFQ_CGROUP_DEBUG. Move them out. v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06bfq: Add per-device weightFam Zheng1-0/+3
This adds to BFQ the missing per-device weight interfaces: blkio.bfq.weight_device on legacy and io.bfq.weight on unified. The implementation pretty closely resembles what we had in CFQ and the parsing code is basically reused. Tests ===== Using two cgroups and three block devices, having weights setup as: Cgroup test1 test2 ============================================ default 100 500 sda 500 100 sdb default default sdc 200 200 cgroup v1 runs -------------- sda.test1.out: READ: bw=913MiB/s sda.test2.out: READ: bw=183MiB/s sdb.test1.out: READ: bw=213MiB/s sdb.test2.out: READ: bw=1054MiB/s sdc.test1.out: READ: bw=650MiB/s sdc.test2.out: READ: bw=650MiB/s cgroup v2 runs -------------- sda.test1.out: READ: bw=915MiB/s sda.test2.out: READ: bw=184MiB/s sdb.test1.out: READ: bw=216MiB/s sdb.test2.out: READ: bw=1069MiB/s sdc.test1.out: READ: bw=621MiB/s sdc.test2.out: READ: bw=622MiB/s Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-25block, bfq: detect wakers and unconditionally inject their I/OPaolo Valente1-1/+24
A bfq_queue Q may happen to be synchronized with another bfq_queue Q2, i.e., the I/O of Q2 may need to be completed for Q to receive new I/O. We call Q2 "waker queue". If I/O plugging is being performed for Q, and Q is not receiving any more I/O because of the above synchronization, then, thanks to BFQ's injection mechanism, the waker queue is likely to get served before the I/O-plugging timeout fires. Unfortunately, this fact may not be sufficient to guarantee a high throughput during the I/O plugging, because the inject limit for Q may be too low to guarantee a lot of injected I/O. In addition, the duration of the plugging, i.e., the time before Q finally receives new I/O, may not be minimized, because the waker queue may happen to be served only after other queues. To address these issues, this commit introduces the explicit detection of the waker queue, and the unconditional injection of a pending I/O request of the waker queue on each invocation of bfq_dispatch_request(). One may be concerned that this systematic injection of I/O from the waker queue delays the service of Q's I/O. Fortunately, it doesn't. On the contrary, next Q's I/O is brought forward dramatically, for it is not blocked for milliseconds. Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: rename CONFIG_DEBUG_BLK_CGROUP to CONFIG_BFQ_CGROUP_DEBUGChristoph Hellwig1-2/+2
This option is entirely bfq specific, give it an appropinquate name. Also make it depend on CONFIG_BFQ_GROUP_IOSCHED in Kconfig, as all the functionality already does so anyway. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-cgroup: move struct blkg_stat to bfqChristoph Hellwig1-7/+12
This structure and assorted infrastructure is only used by the bfq I/O scheduler. Move it there instead of bloating the common code. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: switch all files cleared marked as GPLv2 or later to SPDX tagsChristoph Hellwig1-10/+1
All these files have some form of the usual GPLv2 or later boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22Merge tag 'v5.1-rc6' into for-5.2/blockJens Axboe1-1/+1
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10block, bfq: fix use after free in bfq_bfqq_expirePaolo Valente1-1/+1
The function bfq_bfqq_expire() invokes the function __bfq_bfqq_expire(), and the latter may free the in-service bfq-queue. If this happens, then no other instruction of bfq_bfqq_expire() must be executed, or a use-after-free will occur. Basing on the assumption that __bfq_bfqq_expire() invokes bfq_put_queue() on the in-service bfq-queue exactly once, the queue is assumed to be freed if its refcounter is equal to one right before invoking __bfq_bfqq_expire(). But, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") this assumption is false. __bfq_bfqq_expire() may also invoke bfq_weights_tree_remove() and, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree"), also the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire() may invoke bfq_put_queue() twice, and this is the actual case where the in-service queue may happen to be freed. To address this issue, this commit moves the check on the refcounter of the queue right around the last bfq_put_queue() that may be invoked on the queue. Fixes: 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") Reported-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08block, bfq: fix some typos in commentsAngelo Ruocco1-2/+2
Some of the comments in the bfq files had typos. This patch fixes them. Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block, bfq: save & resume weight on a queue merge/splitFrancesco Pollicino1-0/+9
bfq saves the state of a queue each time a merge occurs, to be able to resume such a state when the queue is associated again with its original process, on a split. Unfortunately bfq does not save & restore also the weight of the queue. If the weight is not correctly resumed when the queue is recycled, then the weight of the recycled queue could differ from the weight of the original queue. This commit adds the missing save & resume of the weight. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block, bfq: print SHARED instead of pid for shared queues in logsFrancesco Pollicino1-4/+19
The function "bfq_log_bfqq" prints the pid of the process associated with the queue passed as input. Unfortunately, if the queue is shared, then more than one process is associated with the queue. The pid that gets printed in this case is the pid of one of the associated processes. Which process gets printed depends on the exact sequence of merge events the queue underwent. So printing such a pid is rather useless and above all is often rather confusing because it reports a random pid between those of the associated processes. This commit addresses this issue by printing SHARED instead of a pid if the queue is shared. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block, bfq: do not merge queues on flash storage with queueingPaolo Valente1-0/+3
To boost throughput with a set of processes doing interleaved I/O (i.e., a set of processes whose individual I/O is random, but whose merged cumulative I/O is sequential), BFQ merges the queues associated with these processes, i.e., redirects the I/O of these processes into a common, shared queue. In the shared queue, I/O requests are ordered by their position on the medium, thus sequential I/O gets dispatched to the device when the shared queue is served. Queue merging costs execution time, because, to detect which queues to merge, BFQ must maintain a list of the head I/O requests of active queues, ordered by request positions. Measurements showed that this costs about 10% of BFQ's total per-request processing time. Request processing time becomes more and more critical as the speed of the underlying storage device grows. Yet, fortunately, queue merging is basically useless on the very devices that are so fast to make request processing time critical. To reach a high throughput, these devices must have many requests queued at the same time. But, in this configuration, the internal scheduling algorithms of these devices do also the job of queue merging: they reorder requests so as to obtain as much as possible a sequential I/O pattern. As a consequence, with processes doing interleaved I/O, the throughput reached by one such device is likely to be the same, with and without queue merging. In view of this fact, this commit disables queue merging, and all related housekeeping, for non-rotational devices with internal queueing. The total, single-lock-protected, per-request processing time of BFQ drops to, e.g., 1.9 us on an Intel Core i7-2760QM@2.40GHz (time measured with simple code instrumentation, and using the throughput-sync.sh script of the S suite [1], in performance-profiling mode). To put this result into context, the total, single-lock-protected, per-request execution time of the lightest I/O scheduler available in blk-mq, mq-deadline, is 0.7 us (mq-deadline is ~800 LOC, against ~10500 LOC for BFQ). Disabling merging provides a further, remarkable benefit in terms of throughput. Merging tends to make many workloads artificially more uneven, mainly because of shared queues remaining non empty for incomparably more time than normal queues. So, if, e.g., one of the queues in a set of merged queues has a higher weight than a normal queue, then the shared queue may inherit such a high weight and, by staying almost always active, may force BFQ to perform I/O plugging most of the time. This evidently makes it harder for BFQ to let the device reach a high throughput. As a practical example of this problem, and of the benefits of this commit, we measured again the throughput in the nasty scenario considered in previous commit messages: dbench test (in the Phoronix suite), with 6 clients, on a filesystem with journaling, and with the journaling daemon enjoying a higher weight than normal processes. With this commit, the throughput grows from ~150 MB/s to ~200 MB/s on a PLEXTOR PX-256M5 SSD. This is the same peak throughput reached by any of the other I/O schedulers. As such, this is also likely to be the maximum possible throughput reachable with this workload on this device, because I/O is mostly random, and the other schedulers basically just pass I/O requests to the drive as fast as possible. [1] https://github.com/Algodev-github/S Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Alessio Masola <alessio.masola@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block, bfq: tune service injection basing on request service timesPaolo Valente1-23/+28
The processes associated with a bfq_queue, say Q, may happen to generate their cumulative I/O at a lower rate than the rate at which the device could serve the same I/O. This is rather probable, e.g., if only one process is associated with Q and the device is an SSD. It results in Q becoming often empty while in service. If BFQ is not allowed to switch to another queue when Q becomes empty, then, during the service of Q, there will be frequent "service holes", i.e., time intervals during which Q gets empty and the device can only consume the I/O already queued in its hardware queues. This easily causes considerable losses of throughput. To counter this problem, BFQ implements a request injection mechanism, which tries to fill the above service holes with I/O requests taken from other bfq_queues. The hard part in this mechanism is finding the right amount of I/O to inject, so as to both boost throughput and not break Q's bandwidth and latency guarantees. To this goal, the current version of this mechanism measures the bandwidth enjoyed by Q while it is being served, and tries to inject the maximum possible amount of extra service that does not cause Q's bandwidth to decrease too much. This solution has an important shortcoming. For bandwidth measurements to be stable and reliable, Q must remain in service for a much longer time than that needed to serve a single I/O request. Unfortunately, this does not hold with many workloads. This commit addresses this issue by changing the way the amount of injection allowed is dynamically computed. It tunes injection as a function of the service times of single I/O requests of Q, instead of Q's bandwidth. Single-request service times are evidently meaningful even if Q gets very few I/O requests completed while it is in service. As a testbed for this new solution, we measured the throughput reached by BFQ for one of the nastiest workloads and configurations for this scheduler: the workload generated by the dbench test (in the Phoronix suite), with 6 clients, on a filesystem with journaling, and with the journaling daemon enjoying a higher weight than normal processes. With this commit, the throughput grows from ~100 MB/s to ~150 MB/s on a PLEXTOR PX-256M5. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block, bfq: do not idle for lowest-weight queuesPaolo Valente1-3/+3
In most cases, it is detrimental for throughput to plug I/O dispatch when the in-service bfq_queue becomes temporarily empty (plugging is performed to wait for the possible arrival, soon, of new I/O from the in-service queue). There is however a case where plugging is needed for service guarantees. If a bfq_queue, say Q, has a higher weight than some other active bfq_queue, and is sync, i.e., contains sync I/O, then, to guarantee that Q does receive a higher share of the throughput than other lower-weight queues, it is necessary to plug I/O dispatch when Q remains temporarily empty while being served. For this reason, BFQ performs I/O plugging when some active bfq_queue has a higher weight than some other active bfq_queue. But this is unnecessarily overkill. In fact, if the in-service bfq_queue actually has a weight lower than or equal to the other queues, then the queue *must not* be guaranteed a higher share of the throughput than the other queues. So, not plugging I/O cannot cause any harm to the queue. And can boost throughput. Taking advantage of this fact, this commit does not plug I/O for sync bfq_queues with a weight lower than or equal to the weights of the other queues. Here is an example of the resulting throughput boost with the dbench workload, which is particularly nasty for BFQ. With the dbench test in the Phoronix suite, BFQ reaches its lowest total throughput with 6 clients on a filesystem with journaling, in case the journaling daemon has a higher weight than normal processes. Before this commit, the total throughput was ~80 MB/sec on a PLEXTOR PX-256M5, after this commit it is ~100 MB/sec. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-31block, bfq: fix in-service-queue check for queue mergingPaolo Valente1-0/+3
When a new I/O request arrives for a bfq_queue, say Q, bfq checks whether that request is close to (a) the head request of some other queue waiting to be served, or (b) the last request dispatched for the in-service queue (in case Q itself is not the in-service queue) If a queue, say Q2, is found for which the above condition holds, then bfq merges Q and Q2, to hopefully get a more sequential I/O in the resulting merged queue, and thus a possibly higher throughput. Case (b) is checked by comparing the new request for Q with the last request dispatched, assuming that the latter necessarily belonged to the in-service queue. Unfortunately, this assumption is no longer always correct, since commit d0edc2473be9 ("block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash"). When the assumption does not hold, queues that must not be merged may be merged, causing unexpected loss of control on per-queue service guarantees. This commit solves this problem by adding an extra field, which stores the actual last request dispatched for the in-service queue, and by using this new field to correctly check case (b). Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-31block, bfq: consider also ioprio classes in symmetry detectionPaolo Valente1-3/+5
In asymmetric scenarios, i.e., when some bfq_queue or bfq_group needs to be guaranteed a different bandwidth than other bfq_queues or bfq_groups, these service guaranteed can be provided only by plugging I/O dispatch, completely or partially, when the queue in service remains temporarily empty. A case where asymmetry is particularly strong is when some active bfq_queues belong to a higher-priority class than some other active bfq_queues. Unfortunately, this important case is not considered at all in the code for detecting asymmetric scenarios. This commit adds the missing logic. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07block, bfq: fix decrement of num_active_groupsPaolo Valente1-2/+49
Since commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection")', if there are process groups with I/O requests waiting for completion, then BFQ tags the scenario as 'asymmetric'. This detection is needed for preserving service guarantees (for details, see comments on the computation * of the variable asymmetric_scenario in the function bfq_better_to_idle). Unfortunately, commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection")' contains an error exactly in the updating of the number of groups with I/O requests waiting for completion: if a group has more than one descendant process, then the above number of groups, which is renamed from num_active_groups to a more appropriate num_groups_with_pending_reqs by this commit, may happen to be wrongly decremented multiple times, namely every time one of the descendant processes gets all its pending I/O requests completed. A correct, complete solution should work as follows. Consider a group that is inactive, i.e., that has no descendant process with pending I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs is still accounting for this group, because the group still has some descendant process with some I/O request still in flight. num_groups_with_pending_reqs should be decremented when the in-flight request of the last descendant process is finally completed (assuming that nothing else has changed for the group in the meantime, in terms of composition of the group and active/inactive state of child groups and processes). To accomplish this, an additional pending-request counter must be added to entities, and must be updated correctly. To avoid this additional field and operations, this commit resorts to the following tradeoff between simplicity and accuracy: for an inactive group that is still counted in num_groups_with_pending_reqs, this commit decrements num_groups_with_pending_reqs when the first descendant process of the group remains with no request waiting for completion. This simplified scheme provides a fix to the unbalanced decrements introduced by 2d29c9f89fcd. Since this error was also caused by lack of comments on this non-trivial issue, this commit also adds related comments. Fixes: 2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection") Reported-by: Steven Barrett <steven@liquorix.net> Tested-by: Steven Barrett <steven@liquorix.net> Tested-by: Lucjan Lucjanov <lucjan.lucjanov@gmail.com> Reviewed-by: Federico Motta <federico@willer.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-13block, bfq: improve asymmetric scenarios detectionFederico Motta1-16/+11
bfq defines as asymmetric a scenario where an active entity, say E (representing either a single bfq_queue or a group of other entities), has a higher weight than some other entities. If the entity E does sync I/O in such a scenario, then bfq plugs the dispatch of the I/O of the other entities in the following situation: E is in service but temporarily has no pending I/O request. In fact, without this plugging, all the times that E stops being temporarily idle, it may find the internal queues of the storage device already filled with an out-of-control number of extra requests, from other entities. So E may have to wait for the service of these extra requests, before finally having its own requests served. This may easily break service guarantees, with E getting less than its fair share of the device throughput. Usually, the end result is that E gets the same fraction of the throughput as the other entities, instead of getting more, according to its higher weight. Yet there are two other more subtle cases where E, even if its weight is actually equal to or even lower than the weight of any other active entities, may get less than its fair share of the throughput in case the above I/O plugging is not performed: 1. other entities issue larger requests than E; 2. other entities contain more active child entities than E (or in general tend to have more backlog than E). In the first case, other entities may get more service than E because they get larger requests, than those of E, served during the temporary idle periods of E. In the second case, other entities get more service because, by having many child entities, they have many requests ready for dispatching while E is temporarily idle. This commit addresses this issue by extending the definition of asymmetric scenario: a scenario is asymmetric when - active entities representing bfq_queues have differentiated weights, as in the original definition or (inclusive) - one or more entities representing groups of entities are active. This broader definition makes sure that I/O plugging will be performed in all the above cases, provided that there is at least one active group. Of course, this definition is very coarse, so it will trigger I/O plugging also in cases where it is not needed, such as, e.g., multiple active entities with just one child each, and all with the same I/O-request size. The reason for this coarse definition is just that a finer-grained definition would be rather heavy to compute. On the opposite end, even this new definition does not trigger I/O plugging in all cases where there is no active group, and all bfq_queues have the same weight. So, in these cases some unfairness may occur if there are asymmetries in I/O-request sizes. We made this choice because I/O plugging may lower throughput, and probably a user that has not created any group cares more about throughput than about perfect fairness. At any rate, as for possible applications that may care about service guarantees, bfq already guarantees a high responsiveness and a low latency to soft real-time applications automatically. Signed-off-by: Federico Motta <federico@willer.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-14block, bfq: inject other-queue I/O into seeky idle queues on NCQ flashPaolo Valente1-0/+26
The Achilles' heel of BFQ is its failing to reach a high throughput with sync random I/O on flash storage with internal queueing, in case the processes doing I/O have differentiated weights. The cause of this failure is as follows. If at least two processes do sync I/O, and have a different weight from each other, then BFQ plugs I/O dispatching every time one of these processes, while it is being served, remains temporarily without pending I/O requests. This plugging is necessary to guarantee that every process enjoys a bandwidth proportional to its weight; but it empties the internal queue(s) of the drive. And this kills throughput with random I/O. So, if some processes have differentiated weights and do both sync and random I/O, the end result is a throughput collapse. This commit tries to counter this problem by injecting the service of other processes, in a controlled way, while the process in service happens to have no I/O. This injection is performed only if the medium is non rotational and performs internal queueing, and the process in service does random I/O (service injection might be beneficial for sequential I/O too, we'll work on that). As an example of the benefits of this commit, on a PLEXTOR PX-256M5S SSD, and with five processes having differentiated weights and doing sync random 4KB I/O, this commit makes the throughput with bfq grow by 400%, from 25 to 100MB/s. This higher throughput is 10MB/s lower than that reached with none. As some less random I/O is added to the mix, the throughput becomes equal to or higher than that with none. This commit is a very first attempt to recover throughput without losing control, and certainly has many limitations. One is, e.g., that the processes whose service is injected are not chosen so as to distribute the extra bandwidth they receive in accordance to their weights. Thus there might be loss of weighted fairness in some cases. Anyway, this loss concerns extra service, which would not have been received at all without this commit. Other limitations and issues will probably show up with usage. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block, bfq: add/remove entity weights correctlyPaolo Valente1-2/+5
To keep I/O throughput high as often as possible, BFQ performs I/O-dispatch plugging (aka device idling) only when beneficial exactly for throughput, or when needed for service guarantees (low latency, fairness). An important case where the latter condition holds is when the scenario is 'asymmetric' in terms of weights: i.e., when some bfq_queue or whole group of queues has a higher weight, and thus has to receive more service, than other queues or groups. Without dispatch plugging, lower-weight queues/groups may unjustly steal bandwidth to higher-weight queues/groups. To detect asymmetric scenarios, BFQ checks some sufficient conditions. One of these conditions is that active groups have different weights. BFQ controls this condition by maintaining a special set of unique weights of active groups (group_weights_tree). To this purpose, in the function bfq_active_insert/bfq_active_extract BFQ adds/removes the weight of a group to/from this set. Unfortunately, the function bfq_active_extract may happen to be invoked also for a group that is still active (to preserve the correct update of the next queue to serve, see comments in function bfq_no_longer_next_in_service() for details). In this case, removing the weight of the group makes the set group_weights_tree inconsistent. Service-guarantee violations follow. This commit addresses this issue by moving group_weights_tree insertions from their previous location (in bfq_active_insert) into the function __bfq_activate_entity, and by moving group_weights_tree extractions from bfq_active_extract to when the entity that represents a group remains throughly idle, i.e., with no request either enqueued or dispatched. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: remove slow-system classPaolo Valente1-10/+4
BFQ computes the duration of weight raising for interactive applications automatically, using some reference parameters. In particular, BFQ uses the best durations (see comments in the code for how these durations have been assessed) for two classes of systems: slow and fast ones. Examples of slow systems are old phones or systems using micro HDDs. Fast systems are all the remaining ones. Using these parameters, BFQ computes the actual duration of the weight raising, for the system at hand, as a function of the relative speed of the system w.r.t. the speed of a reference system, belonging to the same class of systems as the system at hand. This slow vs fast differentiation proved to be useful in the past, but happens to have little meaning with current hardware. Even worse, it does cause problems in virtual systems, where the speed of the system can vary frequently, and so widely to just confuse the class-detection mechanism, and, as we have verified experimentally, to cause BFQ to compute non-sensical weight-raising durations. This commit addresses this issue by removing the slow class and the class-detection mechanism. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10bfq-iosched: remove unused variableJens Axboe1-6/+0
bfqd->sb_shift was attempted used as a cache for the sbitmap queue shift, but we don't need it, as it never changes. Kill it with fire. Acked-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: use ktime_get_ns() instead of sched_clock() for cfq and bfqOmar Sandoval1-5/+5
cfq and bfq have some internal fields that use sched_clock() which can trivially use ktime_get_ns() instead. Their timestamp fields in struct request can also use ktime_get_ns(), which resolves the 8 year old comment added by commit 28f4197e5d47 ("block: disable preemption before using sched_clock()"). Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26block, bfq: lower-bound the estimated peak rate to 1Paolo Valente1-1/+1
If a storage device handled by BFQ happens to be slower than 7.5 KB/s for a certain amount of time (in the order of a second), then the estimated peak rate of the device, maintained in BFQ, becomes equal to 0. The reason is the limited precision with which the rate is represented (details on the range of representable values in the comments introduced by this commit). This leads to a division-by-zero error where the estimated peak rate is used as divisor. Such a type of failure has been reported in [1]. This commit addresses this issue by: 1. Lower-bounding the estimated peak rate to 1 2. Adding and improving comments on the range of rates representable [1] https://www.spinics.net/lists/kernel/msg2739205.html Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-18block, bfq: limit sectors served with interactive weight raisingPaolo Valente1-0/+5
To maximise responsiveness, BFQ raises the weight, and performs device idling, for bfq_queues associated with processes deemed as interactive. In particular, weight raising has a maximum duration, equal to the time needed to start a large application. If a weight-raised process goes on doing I/O beyond this maximum duration, it loses weight-raising. This mechanism is evidently vulnerable to the following false positives: I/O-bound applications that will go on doing I/O for much longer than the duration of weight-raising. These applications have basically no benefit from being weight-raised at the beginning of their I/O. On the opposite end, while being weight-raised, these applications a) unjustly steal throughput to applications that may truly need low latency; b) make BFQ uselessly perform device idling; device idling results in loss of device throughput with most flash-based storage, and may increase latencies when used purposelessly. This commit adds a countermeasure to reduce both the above problems. To introduce this countermeasure, we provide the following extra piece of information (full details in the comments added by this commit). During the start-up of the large application used as a reference to set the duration of weight-raising, involved processes transfer at most ~110K sectors each. Accordingly, a process initially deemed as interactive has no right to be weight-raised any longer, once transferred 110K sectors or more. Basing on this consideration, this commit early-ends weight-raising for a bfq_queue if the latter happens to have received an amount of service at least equal to 110K sectors (actually, a little bit more, to keep a safety margin). I/O-bound applications that reach a high throughput, such as file copy, get to this threshold much before the allowed weight-raising period finishes. Thus this early ending of weight-raising reduces the amount of time during which these applications cause the problems described above. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>