summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-07-12arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFSKefeng Wang1-1/+0
After commit 1d0fd57a50aa ("logfs: remove from tree"), logfs was removed, drop CONFIG_LOGFS from all defconfigs. Link: http://lkml.kernel.org/r/20190530021032.190639-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12scripts/spelling.txt: drop "sepc" from the misspelling listPaul Walmsley2-2/+2
The RISC-V architecture has a register named the "Supervisor Exception Program Counter", or "sepc". This abbreviation triggers checkpatch.pl's misspelling detector, resulting in noise in the checkpatch output. The risk that this noise could cause more useful warnings to be missed seems to outweigh the harm of an occasional misspelling of "spec". Thus drop the "sepc" entry from the misspelling list. [akpm@linux-foundation.org: fix existing "sepc" instances, per Joe] Link: http://lkml.kernel.org/r/20190518210037.13674-1-paul.walmsley@sifive.com Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm/nvdimm: add is_ioremap_addr and use that to check ioremap addressAneesh Kumar K.V1-0/+14
Architectures like powerpc use different address range to map ioremap and vmalloc range. The memunmap() check used by the nvdimm layer was wrongly using is_vmalloc_addr() to check for ioremap range which fails for ppc64. This result in ppc64 not freeing the ioremap mapping. The side effect of this is an unbind failure during module unload with papr_scm nvdimm driver Link: http://lkml.kernel.org/r/20190701134038.14165-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12x86/vdso: Fix flip/flop vdso build bugNaohiro Aota1-6/+6
Two consecutive "make" on an already compiled kernel tree will show different behavior: $ make CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CHK include/generated/compile.h VDSOCHK arch/x86/entry/vdso/vdso64.so.dbg VDSOCHK arch/x86/entry/vdso/vdso32.so.dbg Kernel: arch/x86/boot/bzImage is ready (#3) Building modules, stage 2. MODPOST 12 modules $ make make CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CHK include/generated/compile.h VDSO arch/x86/entry/vdso/vdso64.so.dbg OBJCOPY arch/x86/entry/vdso/vdso64.so VDSO2C arch/x86/entry/vdso/vdso-image-64.c CC arch/x86/entry/vdso/vdso-image-64.o VDSO arch/x86/entry/vdso/vdso32.so.dbg OBJCOPY arch/x86/entry/vdso/vdso32.so VDSO2C arch/x86/entry/vdso/vdso-image-32.c CC arch/x86/entry/vdso/vdso-image-32.o AR arch/x86/entry/vdso/built-in.a AR arch/x86/entry/built-in.a AR arch/x86/built-in.a GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o AR init/built-in.a LD vmlinux.o <snip> This is causing "LD vmlinux" once every two times even without any modifications. This is the same bug fixed in commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug"). Two "if_changed" cannot be used in one target. Fix this merging two commands into one function. Fixes: 7ac870747988 ("x86/vdso: Switch to generic vDSO implementation") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lkml.kernel.org/r/20190712101556.17833-1-naohiro.aota@wdc.com
2019-07-12powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.Athira Rajeev1-1/+1
commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") reimplemented book3S code to pltform/powernv/idle.c. But when doing so missed to add the per-thread LDBAR update in the core_woken path of the power9_idle_stop(). Patch fixes the same. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190702105836.26695-1-maddy@linux.vnet.ibm.com
2019-07-11Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-7/+0
Pull MMC updates from Ulf Hansson: "MMC core: - Let the dma map ops deal with bouncing and drop dma_max_pfn() from the dma-mapping interface for ARM - Convert the generic MMC DT doc to YAML schemas - Drop questionable support for powered-on re-init of SDIO cards at runtime resume and for SDIO HW reset - Prevent questionable re-init of powered-on removable SDIO cards at system resume - Cleanup and clarify some SDIO core code MMC host: - tmio: Make runtime PM enablement more flexible for variants - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt to clarify - sdhci-pci: Add support for Intel EHL - sdhci-pci-o2micro: Enable support for 8-bit bus - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock - sdhci-of-esdhc: Improve clock management and tuning - sdhci_am654: Enable support for 4 and 8-bit bus on J721E - sdhci-sprd: Use pinctrl for a proper signal voltage switch - sdhci-sprd: Add support for HS400 enhanced strobe mode - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the clock - sdhci-sprd: Add support for optional gate clock - sunxi-mmc: Convert DT doc to YAML schemas - meson-gx: Add support for broken DRAM access for DMA MEMSTICK core: - Fixup error path of memstick_init()" * tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654 mmc: alcor: remove a redundant greater or equal to zero comparison mmc: sdhci-msm: fix mutex while in spinlock mmc: sdhci_am654: Make some symbols static dma-mapping: remove dma_max_pfn mmc: core: let the dma map ops handle bouncing dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt mmc: sdhci-sprd: Add pin control support for voltage switch dt-bindings: mmc: sprd: Add pinctrl support mmc: sdhci-sprd: Add start_signal_voltage_switch ops mmc: sdhci-pci: Add support for Intel EHL mmc: tmio: Use dma_max_mapping_size() instead of a workaround mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card() mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card() mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume mmc: sdio: Drop powered-on re-init at runtime resume and HW reset mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card() mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore() mmc: sdio: Turn sdio_run_irqs() into static mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS ...
2019-07-11Merge tag 'usb-5.3-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...
2019-07-11Merge tag 'tty-5.3-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the "large" TTY and Serial driver update for 5.3-rc1. It's in the negative number of lines overall as we removed an obsolete serial driver that was causing problems for some people who were trying to clean up some apis (the mpsc.c driver, which only worked for some pre-production hardware that no one has anymore.) Other than that, lots of tiny changes, cleaning up small things along with some platform-specific serial driver updates. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (68 commits) tty: serial: fsl_lpuart: add imx8qxp support serial: imx: set_termios(): preserve RTS state serial: imx: set_termios(): clarify RTS/CTS bits calculation serial: imx: set_termios(): factor-out 'ucr2' initial value serial: sh-sci: Terminate TX DMA during buffer flushing serial: sh-sci: Fix TX DMA buffer flushing and workqueue races serial: mpsc: Remove obsolete MPSC driver serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port() serial: stm32: add RX and TX FIFO flush serial: stm32: add support of RX FIFO threshold serial: stm32: add support of TX FIFO threshold serial: stm32: update PIO transmission serial: stm32: add support of timeout interrupt for RX Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled" tty/serial/8250: use mctrl_gpio helpers serial: mctrl_gpio: Check if GPIO property exisits before requesting it serial: 8250: pericom_do_set_divisor can be static tty: serial_core: Set port active bit in uart_port_activate serial: 8250: Add MSR/MCR TIOCM conversion wrapper functions serial: 8250: factor out serial8250_{set,clear}_THRI() helpers ...
2019-07-11Merge tag 'char-misc-5.3-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "large" pull request for char and misc and other assorted smaller driver subsystems for 5.3-rc1. It seems that this tree is becoming the funnel point of lots of smaller driver subsystems, which is fine for me, but that's why it is getting larger over time and does not just contain stuff under drivers/char/ and drivers/misc. Lots of small updates all over the place here from different driver subsystems: - habana driver updates - coresight driver updates - documentation file movements and updates - Android binder fixes and updates - extcon driver updates - google firmware driver updates - fsi driver updates - smaller misc and char driver updates - soundwire driver updates - nvmem driver updates - w1 driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (188 commits) coresight: Do not default to CPU0 for missing CPU phandle dt-bindings: coresight: Change CPU phandle to required property ocxl: Allow contexts to be attached with a NULL mm fsi: sbefifo: Don't fail operations when in SBE IPL state coresight: tmc: Smatch: Fix potential NULL pointer dereference coresight: etm3x: Smatch: Fix potential NULL pointer dereference coresight: Potential uninitialized variable in probe() coresight: etb10: Do not call smp_processor_id from preemptible coresight: tmc-etf: Do not call smp_processor_id from preemptible coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible coresight: tmc-etr: Do not call smp_processor_id() from preemptible docs: misc-devices: convert files without extension to ReST fpga: dfl: fme: align PR buffer size per PR datawidth fpga: dfl: fme: remove copy_to_user() in ioctl for PR fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address. intel_th: msu: Start read iterator from a non-empty window intel_th: msu: Split sgt array and pointer in multiwindow mode intel_th: msu: Support multipage blocks intel_th: pci: Add Ice Lake NNPI support intel_th: msu: Fix single mode with disabled IOMMU ...
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+8
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-07-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds11-83/+90
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A collection of assorted fixes: - Fix for the pinned cr0/4 fallout which escaped all testing efforts because the kvm-intel module was never loaded when the kernel was compiled with CONFIG_PARAVIRT=n. The cr0/4 accessors are moved out of line and static key is now solely used in the core code and therefore can stay in the RO after init section. So the kvm-intel and other modules do not longer reference the (read only) static key which the module loader tried to update. - Prevent an infinite loop in arch_stack_walk_user() by breaking out of the loop once the return address is detected to be 0. - Prevent the int3_emulate_call() selftest from corrupting the stack when KASAN is enabled. KASASN clobbers more registers than covered by the emulated call implementation. Convert the int3_magic() selftest to a ASM function so the compiler cannot KASANify it. - Unbreak the build with old GCC versions and with the Gold linker by reverting the 'Move of _etext to the actual end of .text'. In both cases the build fails with 'Invalid absolute R_X86_64_32S relocation: _etext' - Initialize the context lock for init_mm, which was never an issue until the alternatives code started to use a temporary mm for patching. - Fix a build warning vs. the LOWMEM_PAGES constant where clang complains rightfully about a signed integer overflow in the shift operation by converting the operand to an ULL. - Adjust the misnamed ENDPROC() of common_spurious in the 32bit entry code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/stacktrace: Prevent infinite loop in arch_stack_walk_user() x86/asm: Move native_write_cr0/4() out of line x86/pgtable/32: Fix LOWMEM_PAGES constant x86/alternatives: Fix int3_emulate_call() selftest stack corruption x86/entry/32: Fix ENDPROC of common_spurious Revert "x86/build: Move _etext to actual end of .text" x86/ldt: Initialize the context lock for init_mm
2019-07-11s390/unwind: avoid int overflow in outside_of_stackVasily Gorbik1-1/+1
When current task is interrupted in-between stack frame allocation and backchain write instructions new stack frame backchain pointer is left uninitialized. That invalid backchain value is passed into outside_of_stack for sanity check. Make sure int overflow does not happen by subtracting stack_frame size from the stack "end" rather than adding it to "random" backchain value. Fixes: 41b0474c1b1c ("s390/unwind: introduce stack unwind API") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/pci: add mio_enabled attributeSebastian Ott1-0/+10
Provide an attribute to query the usage of mio instructions. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390: fix setting of mio addressing controlSebastian Ott3-13/+3
Move enablement of mio addressing control from detect_machine_facilities to pci_base_init. detect_machine_facilities runs so early that the static branches have not been toggled yet, thus mio addressing control was always off. In pci_base_init we have to use the SMP aware ctl_set_bit though. Fixes: 833b441ec0f6 ("s390: enable processes for mio instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/ipl: Fix detection of has_secure attributePhilipp Rudo2-7/+1
Use the correct bit for detection of the machine capability associated with the has_secure attribute. It is expected that the underlying platform (including hypervisors) unsets the bit when they don't provide secure ipl for their guests. Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute") Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/cpumf: Add extended counter set definitions for model 8561 and 8562Thomas Richter1-0/+2
Add the extended counter set definitions for s390 machine types 8561 and 8262. They are identical with machine types 3906 and 3907. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add new ioctl to release spaceJan Höppner1-0/+3
Userspace tools might have the need to release space for Extent Space Efficient (ESE) volumes when working with such a device. Provide the necessarry interface for such a task by implementing a new ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for data input: typedef struct format_data_t { unsigned int start_unit; /* from track */ unsigned int stop_unit; /* to track */ unsigned int blksize; /* sectorsize */ unsigned int intensity; } format_data_t; If the intensity is set to 0x40, start_unit and stop_unit are ignored and space for the entire volume is released. Otherwise, if intensity is set to 0, the respective range is released (if possible). Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add missing intensity definitionJan Höppner1-0/+1
The definition for the bit that removes the write permission for record zero when formatting was missing. Add it to complete the list. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Fix whitespaceJan Höppner1-75/+75
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds32-343/+325
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-11Merge tag 'clone3-v5.3' of ↵Linus Torvalds11-3/+22
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull clone3 system call from Christian Brauner: "This adds the clone3 syscall which is an extensible successor to clone after we snagged the last flag with CLONE_PIDFD during the 5.2 merge window for clone(). It cleanly supports all of the flags from clone() and thus all legacy workloads. There are few user visible differences between clone3 and clone. First, CLONE_DETACHED will cause EINVAL with clone3 so we can reuse this flag. Second, the CSIGNAL flag is deprecated and will cause EINVAL to be reported. It is superseeded by a dedicated "exit_signal" argument in struct clone_args thus freeing up even more flags. And third, clone3 gives CLONE_PIDFD a dedicated return argument in struct clone_args instead of abusing CLONE_PARENT_SETTID's parent_tidptr argument. The clone3 uapi is designed to be easy to handle on 32- and 64 bit: /* uapi */ struct clone_args { __aligned_u64 flags; __aligned_u64 pidfd; __aligned_u64 child_tid; __aligned_u64 parent_tid; __aligned_u64 exit_signal; __aligned_u64 stack; __aligned_u64 stack_size; __aligned_u64 tls; }; and a separate kernel struct is used that uses proper kernel typing: /* kernel internal */ struct kernel_clone_args { u64 flags; int __user *pidfd; int __user *child_tid; int __user *parent_tid; int exit_signal; unsigned long stack; unsigned long stack_size; unsigned long tls; }; The system call comes with a size argument which enables the kernel to detect what version of clone_args userspace is passing in. clone3 validates that any additional bytes a given kernel does not know about are set to zero and that the size never exceeds a page. A nice feature is that this patchset allowed us to cleanup and simplify various core kernel codepaths in kernel/fork.c by making the internal _do_fork() function take struct kernel_clone_args even for legacy clone(). This patch also unblocks the time namespace patchset which wants to introduce a new CLONE_TIMENS flag. Note, that clone3 has only been wired up for x86{_32,64}, arm{64}, and xtensa. These were the architectures that did not require special massaging. Other architectures treat fork-like system calls individually and after some back and forth neither Arnd nor I felt confident that we dared to add clone3 unconditionally to all architectures. We agreed to leave this up to individual architecture maintainers. This is why there's an additional patch that introduces __ARCH_WANT_SYS_CLONE3 which any architecture can set once it has implemented support for clone3. The patch also adds a cond_syscall(clone3) for architectures such as nios2 or h8300 that generate their syscall table by simply including asm-generic/unistd.h. The hope is to get rid of __ARCH_WANT_SYS_CLONE3 and cond_syscall() rather soon" * tag 'clone3-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: arch: handle arches who do not yet define clone3 arch: wire-up clone3() syscall fork: add clone3
2019-07-12powerpc/eeh: Handle hugepages in ioremap spaceOliver O'Halloran1-3/+12
In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") support for using hugepages in the vmalloc and ioremap areas was enabled for radix. Unfortunately this broke EEH MMIO error checking. Detection works by inserting a hook which checks the results of the ioreadXX() set of functions. When a read returns a 0xFFs response we need to check for an error which we do by mapping the (virtual) MMIO address back to a physical address, then mapping physical address to a PCI device via an interval tree. When translating virt -> phys we currently assume the ioremap space is only populated by PAGE_SIZE mappings. If a hugepage mapping is found we emit a WARN_ON(), but otherwise handles the check as though a normal page was found. In pathalogical cases such as copying a buffer containing a lot of 0xFFs from BAR memory this can result in the system not booting because it's too busy printing WARN_ON()s. There's no real reason to assume huge pages can't be present and we're prefectly capable of handling them, so do that. Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini4641-30982/+6556
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-11KVM: x86: Unconditionally enable irqs in guest contextSean Christopherson2-9/+12
On VMX, KVM currently does not re-enable irqs until after it has exited the guest context. As a result, a tick that fires in the window between VM-Exit and guest_exit_irqoff() will be accounted as system time. While said window is relatively small, it's large enough to be problematic in some configurations, e.g. if VM-Exits are consistently occurring a hair earlier than the tick irq. Intentionally toggle irqs back off so that guest_exit_irqoff() can be used in lieu of guest_exit() in order to avoid the save/restore of flags in guest_exit(). On my Haswell system, "nop; cli; sti" is ~6 cycles, versus ~28 cycles for "pushf; pop <reg>; cli; push <reg>; popf". Fixes: f2485b3e0c6c0 ("KVM: x86: use guest_exit_irqoff") Reported-by: Wei Yang <w90p710@gmail.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-11KVM: x86: PMU Event FilterEric Hankland5-0/+81
Some events can provide a guest with information about other guests or the host (e.g. L3 cache stats); providing the capability to restrict access to a "safe" set of events would limit the potential for the PMU to be used in any side channel attacks. This change introduces a new VM ioctl that sets an event filter. If the guest attempts to program a counter for any blacklisted or non-whitelisted event, the kernel counter won't be created, so any RDPMC/RDMSR will show 0 instances of that event. Signed-off-by: Eric Hankland <ehankland@google.com> [Lots of changes. All remaining bugs are probably mine. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-11x86/stacktrace: Prevent infinite loop in arch_stack_walk_user()Eiichi Tsukata1-5/+3
arch_stack_walk_user() checks `if (fp == frame.next_fp)` to prevent a infinite loop by self reference but it's not enogh for circular reference. Once a lack of return address is found, there is no point to continue the loop, so break out. Fixes: 02b67518e2b1 ("tracing: add support for userspace stacktraces in tracing/iter_ctrl") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20190711023501.963-1-devel@etsukata.com
2019-07-10Merge tag 'pidfd-updates-v5.3' of ↵Linus Torvalds18-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds two main features. - First, it adds polling support for pidfds. This allows process managers to know when a (non-parent) process dies in a race-free way. The notification mechanism used follows the same logic that is currently used when the parent of a task is notified of a child's death. With this patchset it is possible to put pidfds in an {e}poll loop and get reliable notifications for process (i.e. thread-group) exit. - The second feature compliments the first one by making it possible to retrieve pollable pidfds for processes that were not created using CLONE_PIDFD. A lot of processes get created with traditional PID-based calls such as fork() or clone() (without CLONE_PIDFD). For these processes a caller can currently not create a pollable pidfd. This is a problem for Android's low memory killer (LMK) and service managers such as systemd. Both patchsets are accompanied by selftests. It's perhaps worth noting that the work done so far and the work done in this branch for pidfd_open() and polling support do already see some adoption: - Android is in the process of backporting this work to all their LTS kernels [1] - Service managers make use of pidfd_send_signal but will need to wait until we enable waiting on pidfds for full adoption. - And projects I maintain make use of both pidfd_send_signal and CLONE_PIDFD [2] and will use polling support and pidfd_open() too" [1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22 [2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753 * tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add pidfd_open() tests arch: wire-up pidfd_open() pid: add pidfd_open() pidfd: add polling selftests pidfd: add polling support
2019-07-10Merge tag 'm68k-for-v5.3-tag2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire. This is a fix for an issue detected in next, to avoid introducing build failures when merging Christoph's dma-mapping tree later" * tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire
2019-07-10Merge branch 'for-next' of ↵Linus Torvalds17-96/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68nommu updates from Greg Ungerer: "A series of cleanups for the FLAT format binary loader, binfmt_flat, from Christoph. The end goal is to support no-MMU on RISC-V, and the last patch enables that" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: riscv: add binfmt_flat support binfmt_flat: don't offset the data start binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c binfmt_flat: remove the persistent argument from flat_get_addr_from_rp binfmt_flat: provide an asm-generic/flat.h binfmt_flat: make support for old format binaries optional binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option binfmt_flat: add endianess annotations binfmt_flat: use fixed size type for the on-disk format binfmt_flat: consolidate two version of flat_v2_reloc_t binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition binfmt_flat: remove the uapi <linux/flat.h> header binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable binfmt_flat: remove flat_old_ram_flag binfmt_flat: provide a default version of flat_get_relocate_addr binfmt_flat: remove flat_set_persistent binfmt_flat: remove flat_reloc_valid
2019-07-10x86/asm: Move native_write_cr0/4() out of lineThomas Gleixner5-68/+61
The pinning of sensitive CR0 and CR4 bits caused a boot crash when loading the kvm_intel module on a kernel compiled with CONFIG_PARAVIRT=n. The reason is that the static key which controls the pinning is marked RO after init. The kvm_intel module contains a CR4 write which requires to update the static key entry list. That obviously does not work when the key is in a RO section. With CONFIG_PARAVIRT enabled this does not happen because the CR4 write uses the paravirt indirection and the actual write function is built in. As the key is intended to be immutable after init, move native_write_cr0/4() out of line. While at it consolidate the update of the cr4 shadow variable and store the value right away when the pinning is initialized on a booting CPU. No point in reading it back 20 instructions later. This allows to confine the static key and the pinning variable to cpu/common and allows to mark them static. Fixes: 8dbec27a242c ("x86/asm: Pin sensitive CR0 bits") Fixes: 873d50d58f67 ("x86/asm: Pin sensitive CR4 bits") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Xi Ruoyao <xry111@mengyan1223.wang> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Xi Ruoyao <xry111@mengyan1223.wang> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907102140340.1758@nanos.tec.linutronix.de
2019-07-10x86/pgtable/32: Fix LOWMEM_PAGES constantArnd Bergmann1-1/+1
clang points out that the computation of LOWMEM_PAGES causes a signed integer overflow on 32-bit x86: arch/x86/kernel/head32.c:83:20: error: signed shift result (0x100000000) requires 34 bits to represent, but 'int' only has 32 bits [-Werror,-Wshift-overflow] (PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT); ^~~~~~~~~~~~ arch/x86/include/asm/pgtable_32.h:109:27: note: expanded from macro 'LOWMEM_PAGES' #define LOWMEM_PAGES ((((2<<31) - __PAGE_OFFSET) >> PAGE_SHIFT)) ~^ ~~ arch/x86/include/asm/pgtable_32.h:98:34: note: expanded from macro 'PAGE_TABLE_SIZE' #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) Use the _ULL() macro to make it a 64-bit constant. Fixes: 1e620f9b23e5 ("x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190710130522.1802800-1-arnd@arndb.de
2019-07-11kbuild: remove src and obj from the top MakefileMasahiro Yamada3-8/+8
Replace $(src) and $(obj) with $(srctree) and $(objtree), respectively. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10kvm: x86: Fix -Wmissing-prototypes warningsYi Wang1-1/+0
We get a warning when build kernel W=1: arch/x86/kvm/../../../virt/kvm/eventfd.c:48:1: warning: no previous prototype for ‘kvm_arch_irqfd_allowed’ [-Wmissing-prototypes] kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args) ^ The reason is kvm_arch_irqfd_allowed() is declared in arch/x86/kvm/irq.h, which is not included by eventfd.c. Considering kvm_arch_irqfd_allowed() is a weakly defined function in eventfd.c, remove the declaration to kvm_host.h can fix this. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-10dma-mapping: remove dma_max_pfnChristoph Hellwig1-7/+0
These days, the DMA mapping code must bounce buffers for any unsupported address. If the driver needs to optimize for natively supported ranges, then it should use dma_get_required_mask. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10powerpc/boot: pass CONFIG options in a simpler and more robust wayMasahiro Yamada3-16/+3
Commit 5e9dcb6188a4 ("powerpc/boot: Expose Kconfig symbols to wrapper") was wrong, but commit e41b93a6be57 ("powerpc/boot: Fix build failures with -j 1") was also wrong. The correct dependency is: $(obj)/serial.o: $(obj)/autoconf.h However, I do not see the reason why we need to copy autoconf.h to arch/power/boot/. Nor do I see consistency in the way of passing CONFIG options. decompress.c references CONFIG_KERNEL_GZIP and CONFIG_KERNEL_XZ, which are passed via the command line. serial.c includes autoconf.h to reference a couple of CONFIG options, but this is fragile because we often forget to include "autoconf.h" from source files. In fact, it is already broken. ppc_asm.h references CONFIG_PPC_8xx, but utils.S is not given any way to access CONFIG options. So, CONFIG_PPC_8xx is never defined here. Pass $(LINUXINCLUDE) to make sure CONFIG options are accessible from all .c and .S files in arch/powerpc/boot/. I also removed the -traditional flag to make include/linux/kconfig.h work. This flag makes the preprocessor imitate the behavior of the pre-standard C compiler, but I do not understand why it is necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190705100144.28785-2-yamada.masahiro@socionext.com
2019-07-10powerpc/boot: add {get, put}_unaligned_be32 to xz_config.hMasahiro Yamada1-0/+20
The next commit will make the way of passing CONFIG options more robust. Unfortunately, it would uncover another hidden issue; without this commit, skiroot_defconfig would be broken like this: | WRAP arch/powerpc/boot/zImage.pseries | arch/powerpc/boot/wrapper.a(decompress.o): In function `bcj_powerpc.isra.10': | decompress.c:(.text+0x720): undefined reference to `get_unaligned_be32' | decompress.c:(.text+0x7a8): undefined reference to `put_unaligned_be32' | make[1]: *** [arch/powerpc/boot/Makefile;383: arch/powerpc/boot/zImage.pseries] Error 1 | make: *** [arch/powerpc/Makefile;295: zImage] Error 2 skiroot_defconfig is the only defconfig that enables CONFIG_KERNEL_XZ for ppc, which has never been correctly built before. I figured out the root cause in lib/decompress_unxz.c: | #ifdef CONFIG_PPC | # define XZ_DEC_POWERPC | #endif CONFIG_PPC is undefined here in the ppc bootwrapper because autoconf.h is not included except by arch/powerpc/boot/serial.c XZ_DEC_POWERPC is not defined, therefore, bcj_powerpc() is not compiled for the bootwrapper. With the next commit passing CONFIG_PPC correctly, we would realize that {get,put}_unaligned_be32 was missing. Unlike the other decompressors, the ppc bootwrapper duplicates all the necessary helpers in arch/powerpc/boot/. The other architectures define __KERNEL__ and pull in helpers for building the decompressors. If ppc bootwrapper had defined __KERNEL__, lib/xz/xz_private.h would have included <asm/unaligned.h>: | #ifdef __KERNEL__ | # include <linux/xz.h> | # include <linux/kernel.h> | # include <asm/unaligned.h> However, doing so would cause tons of definition conflicts since the bootwrapper has duplicated everything. I just added copies of {get,put}_unaligned_be32, following the bootwrapper coding convention. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190705100144.28785-1-yamada.masahiro@socionext.com
2019-07-10powerpc/irq: Don't WARN continuously in arch_local_irq_restore()Michael Ellerman1-3/+3
When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a series of WARN_ON's in arch_local_irq_restore(). These are "should never happen" conditions, but if they do happen they can flood the console and render the system unusable. So switch them to WARN_ON_ONCE(). Fixes: e2b36d591720 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled") Fixes: 9b81c0211c24 ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely") Fixes: 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190708061046.7075-1-mpe@ellerman.id.au
2019-07-09sparc64: Add missing newline at end of fileGeert Uytterhoeven1-1/+1
"git diff" says: \ No newline at end of file after modifying the file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09x86/alternatives: Fix int3_emulate_call() selftest stack corruptionPeter Zijlstra1-5/+20
KASAN shows the following splat during boot: BUG: KASAN: unknown-crash in unwind_next_frame+0x3f6/0x490 Read of size 8 at addr ffffffff84007db0 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Tainted: G T 5.2.0-rc6-00013-g7457c0d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x19/0x1b print_address_description+0x1b0/0x2b2 __kasan_report+0x10f/0x171 kasan_report+0x12/0x1c __asan_load8+0x54/0x81 unwind_next_frame+0x3f6/0x490 unwind_next_frame+0x1b/0x23 arch_stack_walk+0x68/0xa5 stack_trace_save+0x7b/0xa0 save_trace+0x3c/0x93 mark_lock+0x1ef/0x9b1 lock_acquire+0x122/0x221 __mutex_lock+0xb6/0x731 mutex_lock_nested+0x16/0x18 _vm_unmap_aliases+0x141/0x183 vm_unmap_aliases+0x14/0x16 change_page_attr_set_clr+0x15e/0x2f2 set_memory_4k+0x2a/0x2c check_bugs+0x11fd/0x1298 start_kernel+0x793/0x7eb x86_64_start_reservations+0x55/0x76 x86_64_start_kernel+0x87/0xaa secondary_startup_64+0xa4/0xb0 Memory state around the buggy address: ffffffff84007c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 ffffffff84007d00: f1 00 00 00 00 00 00 00 00 00 f2 f2 f2 f3 f3 f3 >ffffffff84007d80: f3 79 be 52 49 79 be 00 00 00 00 00 00 00 00 f1 It turns out that int3_selftest() is corrupting the stack. The problem is that the KASAN-ified version of int3_magic() is much less trivial than the C code appears. It clobbers several unexpected registers. So when the selftest's INT3 is converted to an emulated call to int3_magic(), the registers are clobbered and Bad Things happen when the function returns. Fix this by converting int3_magic() to the trivial ASM function it should be, avoiding all calling convention issues. Also add ASM_CALL_CONSTRAINT to the INT3 ASM, since it contains a 'CALL'. [peterz: cribbed changelog from josh] Fixes: 7457c0da024b ("x86/alternatives: Add int3_emulate_call() selftest") Reported-by: kernel test robot <rong.a.chen@intel.com> Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20190709125744.GB3402@hirez.programming.kicks-ass.net
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds30-40/+40
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09Merge branch 'parisc-5.3-1' of ↵Linus Torvalds13-61/+350
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Dynamic ftrace support by Sven Schnelle and a header guard fix by Denis Efremov" * 'parisc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: asm: psw.h: missing header guard parisc: add dynamic ftrace compiler.h: add CC_USING_PATCHABLE_FUNCTION_ENTRY parisc: use pr_debug() in kernel/module.c parisc: add WARN_ON() to clear_fixmap parisc: add spinlock to patch function parisc: add support for patching multiple words
2019-07-09Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds8-34/+142
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x865 kdump updates from Thomas Gleixner: "Yet more kexec/kdump updates: - Properly support kexec when AMD's memory encryption (SME) is enabled - Pass reserved e820 ranges to the kexec kernel so both PCI and SME can work" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active x86/kexec: Set the C-bit in the identity map page table when SEV is active x86/kexec: Do not map kexec area as decrypted when SEV is active x86/crash: Add e820 reserved ranges to kdump kernel's e820 table x86/mm: Rework ioremap resource mapping determination x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED x86/mm: Create a workarea in the kernel for SME early encryption x86/mm: Identify the end of the kernel area to be reserved
2019-07-09Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds8-43/+233
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Assorted updates to kexec/kdump: - Proper kexec support for 4/5-level paging and jumping from a 5-level to a 4-level paging kernel. - Make the EFI support for kexec/kdump more robust - Enforce that the GDT is properly aligned instead of getting the alignment by chance" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kdump/64: Restrict kdump kernel reservation to <64TB x86/kexec/64: Prevent kexec from 5-level paging to a 4-level only kernel x86/boot: Add xloadflags bits to check for 5-level paging support x86/boot: Make the GDT 8-byte aligned x86/kexec: Add the ACPI NVS region to the ident map x86/boot: Call get_rsdp_addr() after console_init() Revert "x86/boot: Disable RSDP parsing temporarily" x86/boot: Use efi_setup_data for searching RSDP on kexec-ed kernels x86/kexec: Add the EFI system tables and ACPI tables to the ident map
2019-07-09Merge branch 'perf-core-for-linus' of ↵Linus Torvalds13-545/+1336
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle on the kernel side were: - CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake, KabyLake, AmberLake and WhiskeyLake CPUs. - Rework the MSR probing infrastructure to make it more robust, make it work better on virtualized systems and to better expose it on sysfs. - Rework PMU attributes group support based on the feedback from Greg. The core sysfs patch that adds sysfs_update_groups() was acked by Greg. There's a lot of perf tooling changes as well, all around the place: - vendor updates to Intel, cs-etm (ARM), ARM64, s390, - various enhancements to Intel PT tooling support: - Improve CBR (Core to Bus Ratio) packets support. - Export power and ptwrite events to sqlite and postgresql. - Add support for decoding PEBS via PT packets. - Add support for samples to contain IPC ratio, collecting cycles information from CYC packets, showing the IPC info periodically - Allow using time ranges - lots of updates to perf pmu, perf stat, perf trace, eBPF support, perf record, perf diff, etc. - please see the shortlog and Git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits) tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools build: Check if gettid() is available before providing helper perf jvmti: Address gcc string overflow warning for strncpy() perf python: Remove -fstack-protector-strong if clang doesn't have it perf annotate TUI browser: Do not use member from variable within its own initialization perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64 perf evsel: Do not rely on errno values for precise_ip fallback perf thread: Allow references to thread objects after machine__exit() perf header: Assign proper ff->ph in perf_event__synthesize_features() tools arch kvm: Sync kvm headers with the kernel sources perf script: Allow specifying the files to process guest samples perf tools metric: Don't include duration_time in group perf list: Avoid extra : for --raw metrics perf vendor events intel: Metric fixes for SKX/CLX perf tools: Fix typos / broken sentences perf jevents: Add support for Hisi hip08 L3C PMU aliasing perf jevents: Add support for Hisi hip08 HHA PMU aliasing perf jevents: Add support for Hisi hip08 DDRC PMU aliasing perf pmu: Support more complex PMU event aliasing perf diff: Documentation -c cycles option ...
2019-07-09Merge tag 'pm-5.3-rc1' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update PCI and ACPI power management (improved handling of ACPI power resources and PCIe link delays, fixes related to corner cases, hibernation handling rework), fix and extend the operating performance points (OPP) framework, add new cpufreq drivers for Raspberry Pi and imx8m chips, update some other cpufreq drivers, clean up assorted pieces of PM code and documentation and update tools. Specifics: - Improve the handling of shared ACPI power resources in the PCI bus type layer (Mika Westerberg). - Make the PCI layer take link delays required by the PCIe spec into account as appropriate and avoid polling devices in D3cold for PME (Mika Westerberg). - Fix some corner case issues in ACPI device power management and in the PCI bus type layer, optimiza and clean up the handling of runtime-suspended PCI devices during system-wide transitions to sleep states (Rafael Wysocki). - Rework hibernation handling in the ACPI core and the PCI bus type to resume runtime-suspended devices before hibernation (which allows some functional problems to be avoided) and fix some ACPI power management issues related to hiberation (Rafael Wysocki). - Extend the operating performance points (OPP) framework to support a wider range of devices (Rajendra Nayak, Stehpen Boyd). - Fix issues related to genpd_virt_devs and issues with platforms using the set_opp() callback in the OPP framework (Viresh Kumar, Dmitry Osipenko). - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne). - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez). - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł Chmiel, YueHaibing). - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano). - Fix minor issue in the ACPI system sleep support code and export one function from it (Lenny Szubowicz, Dexuan Cui). - Clean up assorted pieces of PM code and documentation (Kefeng Wang, Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang, Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki). - Update the pm-graph utility to v5.4 (Todd Brandt). - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)" * tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits) ACPI: PM: Make acpi_sleep_state_supported() non-static PM: sleep: Drop dev_pm_skip_next_resume_phases() ACPI: PM: Unexport acpi_device_get_power() Documentation: ABI: power: Add missing newline at end of file ACPI: PM: Drop unused function and function header ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS ACPI: PM: Simplify and fix PM domain hibernation callbacks PCI: PM: Simplify bus-level hibernation callbacks PM: ACPI/PCI: Resume all devices during hibernation cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update() cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get() kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset() cpufreq: Don't skip frequency validation for has_target() drivers PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete() PCI / ACPI: Add _PR0 dependent devices ACPI / PM: Introduce concept of a _PR0 dependent device PCI / ACPI: Use cached ACPI device state to get PCI device power state ACPI: PM: Allow transitions to D0 to occur in special cases ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold cpufreq: Use has_target() instead of !setpolicy ...
2019-07-09Merge tag 'fbdev-v5.3' of git://github.com/bzolnier/linuxLinus Torvalds1-2/+11
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - remove fbdev notifier usage for fbcon (as prep work to clean up the fbcon locking), add locking checks in vt/console code and make assorted cleanups in fbdev and backlight code (Daniel Vetter) - add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb, pvr2fb and pxa168fb drivers (me) - fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph Hellwig) - add check for new BGRT status field rotation bits in efifb driver (Hans de Goede) - mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R. Silva) - remove fbdev mxsfb driver in favour of the drm version (Fabio Estevam) - remove broken rfbi code from omap2fb driver (me) - misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me) - misc cleanups (Gustavo A. R. Silva, Colin Ian King, me) * tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits) video: fbdev: imxfb: fix a typo in imxfb_probe() video: fbdev: s3c-fb: Mark expected switch fall-throughs video: fbdev: s3c-fb: fix sparse warnings about using incorrect types video: fbdev: don't print error message on framebuffer_alloc() failure video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure vga_switcheroo: Depend upon fbcon being built-in, if enabled video: fbdev: omap2: remove rfbi video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret video: fbdev-MMP: Use struct_size() in devm_kzalloc() video: fbdev: controlfb: fix warnings about comparing pointer to 0 efifb: BGRT: Add check for new BGRT status field rotation bits jz4740_fb: fix DMA API abuse video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit video: fbdev: s3c-fb: add COMPILE_TEST support video: fbdev: imxfb: fix sparse warnings about using incorrect types video: fbdev: pvr2fb: fix build warning when compiling as module fbcon: Export fbcon_update_vcs backlight: simplify lcd notifier staging/olpc_dcon: Add drm conversion to TODO ...
2019-07-09Merge tag 'please-pull-for_5.3' of ↵Linus Torvalds3-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Tony Luck: "All the bits that Boris had queued in his tree plus four patches to add support for Intel Icelake Xeon and then fix a few corner cases" * tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec EDAC, skx, i10nm: Fix source ID register offset EDAC, i10nm: Check ECC enabling status per channel EDAC, i10nm: Add Intel additional Ice-Lake support EDAC: Make edac_debugfs_create_x*() return void EDAC/aspeed: Remove set but not used variable 'np' EDAC/ie31200: Reformat PCI device table EDAC/ie31200: Add Intel Coffee Lake CPU support EDAC/sifive: Add EDAC platform driver for SiFive SoCs EDAC/sb_edac: Remove redundant update of tad_base arm64: dts: stratix10: Add SDMMC EDAC node EDAC/altera: Add Stratix10 SDMMC support arm64: dts: stratix10: Add OCRAM EDAC node EDAC/altera: Add Stratix10 OCRAM ECC support EDAC/sysfs: Drop device references properly EDAC/sysfs: Fix memory leak when creating a csrow object
2019-07-09Merge tag 'iommu-updates-v5.3' of ↵Linus Torvalds1-408/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Make the dma-iommu code more generic so that it can be used outside of the ARM context with other IOMMU drivers. Goal is to make use of it on x86 too. - Generic IOMMU domain support for the Intel VT-d driver. This driver now makes more use of common IOMMU code to allocate default domains for the devices it handles. - An IOMMU fault reporting API to userspace. With that the IOMMU fault handling can be done in user-space, for example to forward the faults to a VM. - Better handling for reserved regions requested by the firmware. These can be 'relaxed' now, meaning that those don't prevent a device being attached to a VM. - Suspend/Resume support for the Renesas IOMMU driver. - Added support for dumping SVA related fields of the DMAR table in the Intel VT-d driver via debugfs. - A pile of smaller fixes and cleanups. * tag 'iommu-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (90 commits) iommu/omap: No need to check return value of debugfs_create functions iommu/arm-smmu-v3: Invalidate ATC when detaching a device iommu/arm-smmu-v3: Fix compilation when CONFIG_CMA=n iommu/vt-d: Cleanup unused variable iommu/amd: Flush not present cache in iommu_map_page iommu/amd: Only free resources once on init error iommu/amd: Move gart fallback to amd_iommu_init iommu/amd: Make iommu_disable safer iommu/io-pgtable: Support non-coherent page tables iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flag iommu/io-pgtable-arm: Add support to use system cache iommu/arm-smmu-v3: Increase maximum size of queues iommu/vt-d: Silence a variable set but not used iommu/vt-d: Remove an unused variable "length" iommu: Fix integer truncation iommu: Add padding to struct iommu_fault iommu/vt-d: Consolidate domain_init() to avoid duplication iommu/vt-d: Cleanup after delegating DMA domain to generic iommu iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices() iommu/vt-d: Allow DMA domain attaching to rmrr locked device ...
2019-07-09Merge tag 'regulator-v5.3' of ↵Linus Torvalds2-1/+37
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of new features in the core, the most interesting one being support for complex regulator coupling configurations initially targeted at nVidia Tegra SoCs, and some new drivers but otherwise quite a quiet release. Summary: - Core support for gradual ramping of voltages for devices that can't manage large changes in hardware from Bartosz Golaszewski. - Core support for systems that have complex coupling requirements best described via code, contributed by Dmitry Osipenko. - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST Microelectronics STM32-Booster" * tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: max77650: use vsel_step regulator: implement selector stepping regulator: max77650: add MODULE_ALIAS() regulator: max77620: remove redundant assignment to variable ret dt-bindings: regulator: add support for the stm32-booster regulator: add support for the stm32-booster regulator: s2mps11: Adjust supported buck voltages to real values regulator: s2mps11: Fix buck7 and buck8 wrong voltages gpio: Fix return value mismatch of function gpiod_get_from_of_node() regulator: core: Expose some of core functions needed by couplers regulator: core: Introduce API for regulators coupling customization regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend regulator: s2mps11: Reduce number of rdev_get_id() calls regulator: qcom_spmi: Do NULL check for lvs regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel regulator: da9061/62: Adjust LDO voltage selection minimum value regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure regulator: qcom_spmi: add PMS405 SPMI regulator dt-bindings: qcom_spmi: Document pms405 support arm64: dts: msm8998-mtp: Add pm8005_s1 regulator ...
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-25 14:26:33 +0000