summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-04-02fs: add ksys_write() helper; remove in-kernel calls to sys_write()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_write() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_write(). In the near future, the do_mounts / initramfs callers of ksys_write() should be converted to use filp_open() and vfs_write() instead. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-s390@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs/quota: use COMPAT_SYSCALL_DEFINE for sys32_quotactl()Dominik Brodowski1-1/+1
While sys32_quotactl() is only needed on x86, it can use the recommended COMPAT_SYSCALL_DEFINEx() machinery for its setup. Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02x86: remove compat_sys_x86_waitpid()Dominik Brodowski3-10/+1
compat_sys_x86_waitpid() is not needed, as it takes the same parameters (int, *int, int) as the native syscall. Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: x86@kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02x86: use _do_fork() in compat_sys_x86_clone()Dominik Brodowski1-1/+2
It is trivial to directly call _do_fork() instead of the sys_clone() syscall in compat_sys_x86_clone(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: x86@kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-11Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds15-157/+278
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Yet another pile of melted spectrum related updates: - Drop native vsyscall support finally as it causes more trouble than benefit. - Make microcode loading more robust. There were a few issues especially related to late loading which are now surfacing because late loading of the IB* microcodes addressing spectre issues has become more widely used. - Simplify and robustify the syscall handling in the entry code - Prevent kprobes on the entry trampoline code which lead to kernel crashes when the probe hits before CR3 is updated - Don't check microcode versions when running on hypervisors as they are considered as lying anyway. - Fix the 32bit objtool build and a coment typo" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix kernel crash when probing .entry_trampoline code x86/pti: Fix a comment typo x86/microcode: Synchronize late microcode loading x86/microcode: Request microcode on the BSP x86/microcode/intel: Look into the patch cache first x86/microcode: Do not upload microcode if CPUs are offline x86/microcode/intel: Writeback and invalidate caches before updating microcode x86/microcode/intel: Check microcode revision before updating sibling threads x86/microcode: Get rid of struct apply_microcode_ctx x86/spectre_v2: Don't check microcode versions when running under hypervisors x86/vsyscall/64: Drop "native" vsyscalls x86/entry/64/compat: Save one instruction in entry_INT80_compat() x86/entry: Do not special-case clone(2) in compat entry x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls x86/syscalls: Use proper syscall definition for sys_ioperm() x86/entry: Remove stale syscall prototype x86/syscalls/32: Simplify $entry == $compat entries objtool: Fix 32-bit build
2018-03-11Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds2-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two small fixes for RAS/MCE: - Serialize sysfs changes to avoid concurrent modificaiton of underlying data - Add microcode revision to Machine Check records. This should have been there forever, but now with the broken microcode versions in the wild it has become important" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Serialize sysfs changes x86/MCE: Save microcode revision in machine check records
2018-03-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Another set of perf updates: - Fix a Skylake Uncore event format declaration - Prevent perf pipe mode from crahsing which was caused by a missing buffer allocation - Make the perf top popup message which tells the user that it uses fallback mode on older kernels a debug message. - Make perf context rescheduling work correcctly - Robustify the jump error drawing in perf browser mode so it does not try to create references to NULL initialized offset entries - Make trigger_on() robust so it does not enable the trigger before everything is set up correctly to handle it - Make perf auxtrace respect the --no-itrace option so it does not try to queue AUX data for decoding. - Prevent having different number of field separators in CVS output lines when a counter is not supported. - Make the perf kallsyms man page usage behave like it does for all other perf commands. - Synchronize the kernel headers" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix ctx_event_type in ctx_resched() perf tools: Fix trigger class trigger_on() perf auxtrace: Prevent decoding when --no-itrace perf stat: Fix CVS output format for non-supported counters tools headers: Sync x86's cpufeatures.h tools headers: Sync copy of kvm UAPI headers perf record: Fix crash in pipe mode perf annotate browser: Be more robust when drawing jump arrows perf top: Fix annoying fallback message on older kernels perf kallsyms: Fix the usage on the man page perf/x86/intel/uncore: Fix Skylake UPI event format
2018-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-35/+57
Pull KVM fixes from Radim Krčmář: "PPC: - Fix guest time accounting in the host - Fix large-page backing for radix guests on POWER9 - Fix HPT guests on POWER9 backed by 2M or 1G pages - Compile fixes for some configs and gcc versions s390: - Fix random memory corruption when running as guest2 (e.g. KVM in LPAR) and starting guest3 (e.g. nested KVM) with many CPUs - Export forgotten io interrupt delivery statistics counter" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix memory overwrites when not using SCA entries KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler KVM: s390: provide io interrupt kvm_stat KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n
2018-03-09Merge tag 'arm64-fixes' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - The SMCCC firmware interface for the spectre variant 2 mitigation has been updated to allow the discovery of whether the CPU needs the workaround. This pull request relaxes the kernel check on the return value from firmware. - Fix the commit allowing changing from global to non-global page table entries which inadvertently disallowed other safe attribute changes. - Fix sleeping in atomic during the arm_perf_teardown_cpu() code. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook arm64: mm: fix thinko in non-global page table attribute check
2018-03-09arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discoveryMarc Zyngier1-2/+2
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-03-09Merge tag 'powerpc-4.16-5' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-09x86/kprobes: Fix kernel crash when probing .entry_trampoline codeFrancis Deslauriers3-1/+12
Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08Merge tag 'mips_fixes_4.16_4' of ↵Linus Torvalds4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A miscellaneous pile of MIPS fixes for 4.16: - move put_compat_sigset() to evade hardened usercopy warnings (4.16) - select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16) - fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0) - fix disabling of IPIs during BMIPS suspend (3.19)" * tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: BMIPS: Do not mask IPIs during suspend MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT signals: Move put_compat_sigset to compat.h to silence hardened usercopy MIPS: OCTEON: irq: Check for null return on kzalloc allocation MIPS: ath25: Check for kzalloc allocation failure
2018-03-08x86/MCE: Serialize sysfs changesSeunghun Han1-1/+21
The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
2018-03-08x86/MCE: Save microcode revision in machine check recordsTony Luck2-1/+4
Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
2018-03-08x86/pti: Fix a comment typoSeunghun Han1-1/+1
s/visinble/visible/ Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com
2018-03-08x86/microcode: Synchronize late microcode loadingAshok Raj1-26/+92
Original idea by Ashok, completely rewritten by Borislav. Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases. Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update. [ Borislav: Rewrite completely. ] Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
2018-03-08x86/microcode: Request microcode on the BSPBorislav Petkov1-6/+5
... so that any newer version can land in the cache and can later be fished out by the application functions. Do that before grabbing the hotplug lock. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
2018-03-08x86/microcode/intel: Look into the patch cache firstBorislav Petkov1-6/+5
The cache might contain a newer patch - look in there first. A follow-on change will make sure newest patches are loaded into the cache of microcode patches. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de
2018-03-08x86/microcode: Do not upload microcode if CPUs are offlineAshok Raj1-0/+18
Avoid loading microcode if any of the CPUs are offline, and issue a warning. Having different microcode revisions on the system at any time is outright dangerous. [ Borislav: Massage changelog. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
2018-03-08x86/microcode/intel: Writeback and invalidate caches before updating microcodeAshok Raj1-0/+12
Updating microcode is less error prone when caches have been flushed and depending on what exactly the microcode is updating. For example, some of the issues around certain Broadwell parts can be addressed by doing a full cache flush. [ Borislav: Massage it and use native_wbinvd() in both cases. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de
2018-03-08x86/microcode/intel: Check microcode revision before updating sibling threadsAshok Raj1-3/+24
After updating microcode on one of the threads of a core, the other thread sibling automatically gets the update since the microcode resources on a hyperthreaded core are shared between the two threads. Check the microcode revision on the CPU before performing a microcode update and thus save us the WRMSR 0x79 because it is a particularly expensive operation. [ Borislav: Massage changelog and coding style. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de
2018-03-08x86/microcode: Get rid of struct apply_microcode_ctxBorislav Petkov1-11/+8
It is a useless remnant from earlier times. Use the ucode_state enum directly. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de
2018-03-08x86/spectre_v2: Don't check microcode versions when running under hypervisorsKonrad Rzeszutek Wilk1-0/+7
As: 1) It's known that hypervisors lie about the environment anyhow (host mismatch) 2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid "correct" value, it all gets to be very murky when migration happens (do you provide the "new" microcode of the machine?). And in reality the cloud vendors are the ones that should make sure that the microcode that is running is correct and we should just sing lalalala and trust them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kvm <kvm@vger.kernel.org> Cc: Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com
2018-03-08x86/vsyscall/64: Drop "native" vsyscallsAndy Lutomirski3-25/+4
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2 on, Linux had three vsyscall modes: "native", "emulate", and "none". "emulate" is the default. All known user programs work correctly in emulate mode, but vsyscalls turn into page faults and are emulated. This is very slow. In "native" mode, the vsyscall page is easily usable as an exploit gadget, but vsyscalls are a bit faster -- they turn into normal syscalls. (This is in contrast to vDSO functions, which can be much faster than syscalls.) In "none" mode, there are no vsyscalls. For all practical purposes, "native" was really just a chicken bit in case something went wrong with the emulation. It's been over six years, and nothing has gone wrong. Delete it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07Merge branch 'for-linus' of ↵Linus Torvalds3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Nine bug fixes for s390: - Three fixes for the expoline code, one of them is strictly speaking a cleanup but as it relates to code added with 4.16 I would like to include the patch. - Three timer related fixes in the common I/O layer - A fix for the handling of internal DASD request which could cause panics. - One correction in regard to the accounting of pud page tables vs. compat tasks. - The register scrubbing in entry.S caused spurious crashes, this is fixed now as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/entry.S: fix spurious zeroing of r0 s390: Fix runtime warning about negative pgtables_bytes s390: do not bypass BPENTER for interrupt system calls s390/cio: clear timer when terminating driver I/O s390/cio: fix return code after missing interrupt s390/cio: fix ccw_device_start_timeout API s390/clean-up: use CFI_* macros in entry.S s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*) s390/dasd: fix handling of internal requests
2018-03-07x86/entry/64/compat: Save one instruction in entry_INT80_compat()Dominik Brodowski1-3/+1
As %rdi is never user except in the following push, there is no need to restore %rdi to the original value. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/entry: Do not special-case clone(2) in compat entryDominik Brodowski4-13/+14
With the CPU renaming registers on its own, and all the overhead of the syscall entry/exit, it is doubtful whether the compiled output of mov %r8, %rax mov %rcx, %r8 mov %rax, %rcx jmpq sys_clone is measurably slower than the hand-crafted version of xchg %r8, %rcx So get rid of this special case. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscallsDominik Brodowski3-62/+76
While at it, convert declarations of type "unsigned" to "unsigned int". Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls: Use proper syscall definition for sys_ioperm()Dominik Brodowski1-1/+1
Using SYSCALL_DEFINEx() is recommended, so use it also here. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/entry: Remove stale syscall prototypeDominik Brodowski1-1/+0
sys32_vm86_warning() is long gone. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls/32: Simplify $entry == $compat entriesDominik Brodowski1-3/+3
If the compat entry point is equivalent to the native entry point, it does not need to be specified explicitly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-06Merge branch 'siginfo-linus' of ↵Linus Torvalds1-0/+65
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull sigingo fix from Eric Biederman: "The kbuild test robot found that I accidentally moved si_pkey when I was cleaning up siginfo_t. A short followed by an int with the int having 8 byte alignment. Sheesh siginfo_t is a weird structure. I have now corrected it and added build time checks that with a little luck will catch any similar future mistakes. The build time checks were sufficient for me to verify the bug and to verify my fix. So they are at least useful this once." * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/x86: Include the field offsets in the build time checks signal: Correct the offset of si_pkey in struct siginfo
2018-03-06Merge tag 'kvm-s390-master-4.16-3' of ↵Radim Krčmář1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: Fixes - Fix random memory corruption when running as guest2 (e.g. KVM in LPAR) and starting guest3 (nested KVM) with many CPUs (e.g. a nested guest with 200 vcpu) - io interrupt delivery counter was not exported
2018-03-06Merge tag 'kvm-ppc-fixes-4.16-1' of ↵Radim Krčmář3-35/+55
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Fixes for PPC KVM: - Fix guest time accounting in the host - Fix large-page backing for radix guests on POWER9 - Fix HPT guests on POWER9 backed by 2M or 1G pages - Compile fixes for some configs and gcc versions
2018-03-06KVM: s390: fix memory overwrites when not using SCA entriesDavid Hildenbrand1-0/+1
Even if we don't have extended SCA support, we can have more than 64 CPUs if we don't enable any HW features that might use the SCA entries. Now, this works just fine, but we missed a return, which is why we would actually store the SCA entries. If we have more than 64 CPUs, this means writing outside of the basic SCA - bad. Let's fix this. This allows > 64 CPUs when running nested (under vSIE) without random crashes. Fixes: a6940674c384 ("KVM: s390: allow 255 VCPUs when sca entries aren't used") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180306132758.21034-1-david@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-06powerpc/pseries: Fix vector5 in ibm architecture vector tableBharata B Rao1-1/+0
With ibm,dynamic-memory-v2 and ibm,drc-info coming around the same time, byte22 in vector5 of ibm architecture vector table got set twice separately. The end result is that guest kernel isn't advertising support for ibm,dynamic-memory-v2. Fix this by removing the duplicate assignment of byte22. Fixes: 02ef6dd8109b ("powerpc: Enable support for ibm,drc-info devtree property") Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-06s390/entry.S: fix spurious zeroing of r0Christian Borntraeger1-2/+2
when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com> Fixes: 7041d28115e91 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-06signal/x86: Include the field offsets in the build time checksEric W. Biederman1-0/+65
Due to an oversight when refactoring siginfo_t si_pkey has been in the wrong position since 4.16-rc1. Add an explicit check of the offset of every user space field in siginfo_t and compat_siginfo_t to make a mistake like this hard to make in the future. I have run this code on 4.15 and 4.16-rc1 with the position of si_pkey fixed and all of the fields show up in the same location. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-05Merge tag 'please-pull-ia64_misc' of ↵Linus Torvalds3-56/+33
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 cleanups from Tony Luck: - More atomic cleanup from willy - Fix a python script to work with version 3 - Some other small cleanups * tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities" ia64/err-inject: Use get_user_pages_fast() ia64: doc: tweak whitespace for 'console=' parameter ia64: Convert remaining atomic operations ia64: convert unwcheck.py to python3
2018-03-05MIPS: BMIPS: Do not mask IPIs during suspendJustin Chen1-4/+4
Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17385/ [jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-05ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities"Colin Ian King1-1/+1
Trivial fix to spelling mistake in debug message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-03-05ia64/err-inject: Use get_user_pages_fast()Davidlohr Bueso1-1/+1
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-03-05ia64: Convert remaining atomic operationsMatthew Wilcox1-46/+23
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-03-05ia64: convert unwcheck.py to python3Corentin Labbe1-8/+8
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083522e ("scripts: change scripts to use system python instead of env") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-10/+96
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIOHuacai Chen1-0/+3
Commit 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_SERIO select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18704/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORTHuacai Chen1-0/+3
Commit a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_PARPORT select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18703/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-04Merge branch 'x86/urgent' of ↵Linus Torvalds5-17/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Add missing instruction suffixes to assembly code so it can be compiled by newer GAS versions without warnings. - Switch refcount WARN exceptions to UD2 as we did in general - Make the reboot on Intel Edison platforms work - A small documentation update so text and sample command match" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation, x86, resctrl: Make text and sample command match x86/platform/intel-mid: Handle Intel Edison reboot correctly x86/asm: Add instruction suffixes to bitops x86/entry/64: Add instruction suffix x86/refcounts: Switch to UD2 for exceptions
2018-03-04Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds7-25/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend