| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
This merges phase 1 of the x86 tree, which is a collection of branches:
x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump,
x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart,
x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile,
x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and
x86/vmalloc
and as Ingo says: "these are the easiest, purely independent x86 topics
with no conflicts, in one nice Octopus merge".
* 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits)
x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE
x86: mtrr_cleanup: first 1M may be covered in var mtrrs
x86: mtrr_cleanup: print out correct type v2
x86: trivial printk fix in efi.c
x86, debug: mtrr_cleanup print out var mtrr before change it
x86: mtrr_cleanup try gran_size to less than 1M, v3
x86: mtrr_cleanup try gran_size to less than 1M, cleanup
x86: change MTRR_SANITIZER to def_bool y
x86, debug printouts: IOMMU setup failures should not be KERN_ERR
x86: export set_memory_ro and set_memory_rw
x86: mtrr_cleanup try gran_size to less than 1M
x86: mtrr_cleanup prepare to make gran_size to less 1M
x86: mtrr_cleanup safe to get more spare regs now
x86_64: be less annoying on boot, v2
x86: mtrr_cleanup hole size should be less than half of chunk_size, v2
x86: add mtrr_cleanup_debug command line
x86: mtrr_cleanup optimization, v2
x86: don't need to go to chunksize to 4G
x86_64: be less annoying on boot
x86, olpc: fix endian bug in openfirmware workaround
...
|
|
Replace the no longer working links and email address in the
documentation and in source code.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>
|
|
Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: call touch_softlockup_watchdog on resume
kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: gart iommu have direct mapping when agp is present too
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
ide: workaround for bogus gcc warning in ide_sysfs_register_port()
ide-cd: Optiarc DVD RW AD-7200A does play audio
IDE: Fix platform device registration in Swarm IDE driver (v2)
ide-dma: fix ide_build_dmatable() for TRM290
ide-cd: temporary tray close fix
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
[MIPS] Fix CMP Kconfig configuration and mark as broken.
|
|
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
|
|
There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius). As a result, thermal throttling kicks in
and knock the system down to its shoes.
Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.
On my box it was caused by:
commit 691874fa96d6349a8b60f8ea9c2bae52ece79941
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Tue May 27 21:19:51 2008 +0100
x86: I/O APIC: timer through 8259A second-chance
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
and the whole story is described in this (huge) thread:
http://marc.info/?l=linux-kernel&m=121358440508410&w=4
Matthew Garrett told us about that happening on the nx6125:
http://marc.info/?l=linux-kernel&m=121396307411930&w=4
and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:
http://marc.info/?l=linux-kernel&m=121401068718826&w=4
As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.
It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1
|
|
Conflicts:
arch/x86/kernel/signal_64.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
arch/x86/kernel/process_32.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
include/asm-x86/ds.h
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
include/asm-x86/dma-mapping.h
include/asm-x86/gpio.h
include/asm-x86/idle.h
include/asm-x86/kvm_host.h
include/asm-x86/namei.h
include/asm-x86/uaccess.h
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Because sync-r4k.c doesn't build.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable. The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
move init_memory_mapping() out of init_k8_gatt.
for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression
This is needed because we need to map the GART aperture even
if the GATT is not initialized.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
For the purpose of MTRR canonicalization, treat WRPROT as UNCACHEABLE.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
The first 1M is don't care when it comes to the variables MTRRs.
Cover it as WB as a heuristic approximation; this is generally what we
want to minimize the number of registers.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Print out the correct type when the Write Protected (WP) type is seen.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86 setup: correct segfault in generation of 32-bit reloc kernel
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] SMTC: Fix SMTC dyntick support.
[MIPS] SMTC: Close tiny holes in the SMTC IPI replay system.
[MIPS] SMTC: Fix holes in SMTC and FPU affinity support.
[MIPS] SMTC: Build fix: Fix filename in Makefile
[MIPS] Build fix: Fix irq flags type
|
|
Impact: segfault on build of a 32-bit relocatable kernel
When converting arch/x86/boot/compressed/relocs.c to support unlimited
sections, the computation of sym_strtab in walk_relocs() was done
incorrectly. This causes a segfault for some people when building the
relocatable 32-bit kernel.
Pointed out by Anonymous <pageexec@freemail.hu>.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691
("[S390] nohz/sclp: disable timer on synchronous waits.").
If udelay() gets called from a disabled context it sets the clock comparator
to a value where it expects the next interrupt. When the interrupt happens
the clock comparator gets not reset and therefore the interrupt condition
doesn't get cleared. The result is an endless timer interrupt loop.
In addition this patch fixes also the following:
rcutorture reveals that our __udelay implementation is still buggy,
since it might schedule tasklets, but prevents their execution:
NOHZ: local_softirq_pending 42
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 142
NOHZ: local_softirq_pending 02
To fix this we make sure that only the clock comparator interrupt
is enabled when the enabled wait psw is loaded.
Also no code gets called anymore which might schedule tasklets.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Rework of SMTC support to make it work with the new clock event system,
allowing "tickless" operation, and to make it compatible with the use of
the "wait_irqoff" idle loop. The new clocking scheme means that the
previously optional IPI instant replay mechanism is now required, and has
been made more robust.
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Though from a hardware perspective it would be sensible to use only a
32-bit unsigned int type Linux defines interrupt flags to be stored in
an unsigned long and nothing else.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
[patch] x86: Trivial printk fix in efi.c
The following line is lacking a space between "memdesc" and "doesn't".
"Kernel-defined memdescdoesn't match the one from EFI!"
Fixed the printk by adding a space.
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
J.A. Magallón reported:
>> Also, on a 64 bit box with 4Gb, it gives this:
>>
>> cicely:~# cat /proc/mtrr
>> reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
>> reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
>> reg02: base=0x140000000 (5120MB), size= 512MB: write-back, count=1
>> reg03: base=0x160000000 (5632MB), size= 256MB: write-back, count=1
>> reg04: base=0x80000000 (2048MB), size=2048MB: uncachable, count=1
boundary handling has a problem ... fix it.
Reported-by: J.A. Magallón <jamagallon@ono.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Patch below cleans up formatting, with space for big bases and sizes (64 Gb).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Commit 00c5372d37a78990c1530184a9c792ee60a30067 caused the MPC8544DS
board to hang at boot. The MPC8544DS is unique in that it doesn't use
the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD). So
the dummy read at the end of the address space causes us to hang.
We can detect the situation by comparing the bridge's BARs versus
the root complex.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vmi: fix broken LDT access
x86: fix typo in enable_mtrr_cleanup early parameter
|
|
Fix the IRQ handling on the MN10300 arch.
This patch makes a number of significant changes:
(1) It separates the irq_chip definition for edge-triggered interrupts from
the one for level-triggered interrupts.
This is necessary because the MN10300 PIC latches the IRQ channel's
interrupt request bit (GxICR_REQUEST), even after the device has ceased to
assert its interrupt line and the interrupt channel has been disabled in
the PIC. So for level-triggered interrupts we need to clear this bit when
we re-enable - which is achieved by setting GxICR_DETECT but not
GxICR_REQUEST when writing to the register.
Not doing this results in spurious interrupts occurring because calling
mask_ack() at the start of handle_level_irq() is insufficient - it fails
to clear the REQUEST latch because the device that caused the interrupt is
still asserting its interrupt line at this point.
(2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt
request flag for edge-triggered interrupts lest it lose an interrupt.
(3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt
request flag for edge-triggered interrupts lest it lose an interrupt.
(4) The end() operation is now left to the default (no-operation) as
__do_IRQ() is compiled out. This may affect misrouted_irq(), but
according to Thomas Gleixner it's the correct thing to do.
(5) handle_level_irq() is used for edge-triggered interrupts rather than
handle_edge_irq() as the MN10300 PIC latches interrupt events even on
masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is
sufficient to call mask_ack() at the start and unmask() at the end.
(6) For level-triggered interrupts, ack() is now NULL as it's not used, and
there is no effective ACK function on the PIC. mask_ack() is now the
same as mask() as the latch continues to latch, even when the channel is
masked.
Further, the patch discards the disable() op implementation as its now the same
as the mask() op implementation, which is used instead.
It also discards the enable() op implementations as they're now the same as
the unmask() op implementations, which are used instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This option has been added in v2.6.26 as a default-disabled
feature and went through several revisions since then.
The feature fixes a wide range of MTRR setup problems that BIOSes
leave us with: slow system, slow Xorg, slow system when adding lots
of RAM, etc., so we want to enable it by default for v2.6.28.
See:
[Bug 10508] Upgrade to 4GB of RAM messes up MTRRs
http://bugzilla.kernel.org/show_bug.cgi?id=10508
and the test results in:
http://lkml.org/lkml/2008/9/29/273
1. hpa
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
range0: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
hole: 000000013c000000 - 0000000140000000
Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC
2. Dylan Taft
reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1
reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1
reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c8000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
hole: 00000000c7e00000 - 00000000c8000000
Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC
rangeX: 0000000100000000 - 0000000130000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
3. Gabriel
reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1
reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M
range0: 0000000000000000 - 00000000d0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
hole: 00000000cf600000 - 00000000cf800000
Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC
rangeX: 0000000100000000 - 000000012c000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB
Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB
4. Mika Fischer
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
rangeX: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious. It got introduced along with
another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be
After investigating a JRE failure, I found this bug was introduced a long time
ago, and had already managed to survive another bugfix which occurred on the
same line. The result is a total failure of the JRE due to LDT selectors not
working properly.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
After investigating a JRE failure, I found this bug was introduced a
long time ago, and had already managed to survive another bugfix which
occurred on the same line. The result is a total failure of the JRE due
to LDT selectors not working properly.
This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious. It got introduced along with
another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Put the space for cpu0 per-cpu area into .data section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix failure to shutdown with CPU hotplug
powerpc: Fix PCI in Holly device tree
|
|
The number of BIOSes that have an option to enable the IOMMU, or fix
anything about its configuration, is vanishingly small. There's no good
reason to punish quiet boot for this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Correct typo for 'enable_mtrr_cleanup' early boot param name.
Signed-off-by: J.A. Magallon <jamagallon@ono.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Export set_memory_ro() and set_memory_rw() calls for use by drivers that need
to have more debug information about who might be writing to memory space.
this was initially developed for use while debugging a memory corruption
problem with e1000e.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
one have gran < 1M
reg00: base=0xd8000000 (3456MB), size= 128MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0xd7f80000 (3455MB), size= 512KB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 512K chunk_size: 2M num_reg: 7 lose RAM: 0G
range0: 0000000000000000 - 00000000d8000000
Setting variable MTRR 0, base: 0GB, range: 2GB, type WB
Setting variable MTRR 1, base: 2GB, range: 1GB, type WB
Setting variable MTRR 2, base: 3GB, range: 256MB, type WB
Setting variable MTRR 3, base: 3328MB, range: 128MB, type WB
hole: 00000000d7f00000 - 00000000d7f80000
Setting variable MTRR 4, base: 3455MB, range: 512KB, type UC
rangeX: 0000000100000000 - 0000000128000000
Setting variable MTRR 5, base: 4GB, range: 512MB, type WB
Setting variable MTRR 6, base: 4608MB, range: 128MB, type WB
so start from 64k instead of 1M
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
make the print out right with size < 1M
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
