summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-11-24ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disableKuninori Morimoto1-8/+1
Current FSIDIV clock framework had bogus disable. This patch remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24Merge branch 'for-linus' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (41 commits) ALSA: hda - Identify more variants for ALC269 ALSA: hda - Fix wrong ALC269 variant check ALSA: hda - Enable jack sense for Thinkpad Edge 11 ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same mux on IDT/STAC" ALSA: hda - Fixed ALC887-VD initial error ALSA: atmel - Fix the return value in error path ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J ALSA: snd-atmel-abdac: test wrong variable ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolons ALSA: sound/ppc: Use printf extension %pR for struct resource ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls ASoC: uda134x - set reg_cache_default to uda134x_reg ASoC: Add support for MAX98089 CODEC ASoC: davinci: fixes for multi-component ASoC: Fix register cache setup WM8994 for multi-component ASoC: Fix dapm_seq_compare() for multi-component ASoC: RX1950: Fix hw_params function ...
2010-11-24Merge branch 'upstream/for-linus' of ↵Linus Torvalds7-30/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits) xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable Revert "xen/privcmd: create address space to allow writable mmaps" xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: implement XENMEM_machphys_mapping xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier ...
2010-11-23ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.contextMyungJoo Ham1-0/+4
init_mm used at kernel/sched.c:idle_task_exit() has spin_lock (init_mm.context.id_lock) that is not initialized when spin_lock/unlock is called at an ARM machine. Note that mm_struct.context.id_lock is usually initialized except for the instance of init_mm at linux/arch/arm/mm/context.c Not initializing this spinlock incurs "BUG: pinlock bad magic" warning when spinlock debug is enabled. We have observed such instances when testing PM in S5PC210 machines. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23ARM: avoid annoying <4>'s in printk outputRussell King1-2/+2
Adding KERN_WARNING in the middle of strings now produces those tokens in the output, rather than accepting the level as was once the case. Fix this in the one reported case. There might be more... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King5-19/+5
2010-11-22Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into ↵Jeremy Fitzhardinge492-7479/+18788
upstream/for-linus * upstream/core: xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen: implement XENMEM_machphys_mapping * upstream/xenfs: Revert "xen/privcmd: create address space to allow writable mmaps" xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code * upstream/evtchn: xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier xen/evtchn: ports start enabled xen/evtchn: dynamically allocate port_user array xen/evtchn: track enabled state for each port
2010-11-22mmc: sdhci: 8-bit bus width changesPhilip Rakity1-0/+3
We now: * check for a v3 controller before setting 8-bit bus width * offer a callback for platform code to switch to 8-bit mode, which allows non-v3 controllers to support it * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify that the board designers have indeed brought out all the pins for 8-bit to the slot. We were previously relying only on whether the *controller* supported 8-bit, which doesn't tell us anything about the pin configuration in the board design. This fixes the MMC card regression reported by Maxim Levitsky here: http://thread.gmane.org/gmane.linux.kernel.mmc/4336 by no longer assuming that 8-bit works by default. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-22xen: set IO permission early (before early_cpu_init())Konrad Rzeszutek Wilk2-9/+11
This patch is based off "xen dom0: Set up basic IO permissions for dom0." by Juan Quintela <quintela@redhat.com>. On AMD machines when we boot the kernel as Domain 0 we get this nasty: mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1-101116 x86_64 debug=y Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff8130271b>] (XEN) RFLAGS: 0000000000000282 EM: 1 CONTEXT: pv guest (XEN) rax: 000000008000c068 rbx: ffffffff8186c680 rcx: 0000000000000068 (XEN) rdx: 0000000000000cf8 rsi: 000000000000c000 rdi: 0000000000000000 (XEN) rbp: ffffffff81801e98 rsp: ffffffff81801e50 r8: ffffffff81801eac (XEN) r9: ffffffff81801ea8 r10: ffffffff81801eb4 r11: 00000000ffffffff (XEN) r12: ffffffff8186c694 r13: ffffffff81801f90 r14: ffffffffffffffff (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000221803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801e50: RIP points to read_pci_config() function. The issue is that we don't set IO permissions for the Linux kernel early enough. The call sequence used to be: xen_start_kernel() x86_init.oem.arch_setup = xen_setup_arch; setup_arch: - early_cpu_init - early_init_amd - read_pci_config - x86_init.oem.arch_setup [ xen_arch_setup ] - set IO permissions. We need to set the IO permissions earlier on, which this patch does. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-22ARM: avoid marking decompressor .stack section as having contentsRussell King2-2/+2
The .stack section doesn't contain any contents, and doesn't require initialization either. Rather than marking the output section with 'NOLOAD' but still having it exist in the object files, mark it with %nobits which avoids the assembler marking the section with 'CONTENTS'. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21ARM: 6489/1: thumb2: fix incorrect optimisation in usraccWill Deacon1-1/+1
Commit 8b592783 added a Thumb-2 variant of usracc which, when it is called with \rept=2, calls usraccoff once with an offset of 0 and secondly with a hard-coded offset of 4 in order to avoid incrementing the pointer again. If \inc != 4 then we will store the data to the wrong offset from \ptr. Luckily, the only caller that passes \rept=2 to this function is __clear_user so we haven't been actively corrupting user data. This patch fixes usracc to pass \inc instead of #4 to usraccoff when it is called a second time. Cc: <stable@kernel.org> Reported-by: Tony Thompson <tony.thompson@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21ARM: 6488/1: nomadik: prevent sched_clock() wraparoundLinus Walleij1-9/+80
The current implementation of sched_clock() for the Nomadik family is based on the clock source that will wrap around without any compensation. Currently on the Ux500 after 1030 seconds. Utilize cnt32_to_63 to expand the sched_clock() counter to 63 bits and introduce a keepwarm() timer to assure that sched clock and this cnt32_to_63 is called atleast once every half period. When I print out the actual wrap-around time, and using a year (3600*24*365 seconds) as minumum wrap limit I get an actual wrap-around of: sched_clock: using 55 bits @ 8333125 Hz wrap in 416 days Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21ARM: 6484/1: fix compile warning in mm/init.cAnand Gadiyar15-15/+15
Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET) changed VMALLOC_END to be an explicit value. Before this, it was relative to PAGE_OFFSET and therefore converted to unsigned long as PAGE_OFFSET is an unsigned long. This introduced the following build warning. Fix this by changing the explicit defines of VMALLOC_END to be unsigned long. CC arch/arm/mm/init.o arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Uwe Kleine-K <u.kleine-koenig@pengutronix.dee> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21ARM: 6473/1: Small update to ux500 specific L2 cache codePer Fransson1-3/+3
This change updates the ux500 specific outer cache code to use the new *_relaxed() I/O accessors. Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21ARM: improve compiler's ability to optimize page tablesRussell King1-0/+3
Allow the compiler to better optimize the page table walking code by avoiding over-complex pmd_addr_end() calculations. These calculations prevent the compiler spotting that we'll never iterate over the PMD table, causing it to create double nested loops where a single loop will do. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-19xen: re-enable boot-time ballooningJeremy Fitzhardinge1-2/+1
Now that the balloon driver doesn't stumble over non-RAM pages, we can enable the extra space for ballooning. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-18Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-11/+10
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Fix host userspace gsbase corruption KVM: Correct ordering of ldt reload wrt fs/gs reload
2010-11-18Merge branch 'for_linus' of ↵Linus Torvalds2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,ppc: Fix regression in evr register handling kgdb,x86: fix regression in detach handling kdb: fix crash when KDB_BASE_CMD_MAX is exceeded kdb: fix memory leak in kdb_main.c
2010-11-18x86-64: Fix and clean up AMD Fam10 MMCONF enablingJan Beulich2-35/+31
Candidate memory ranges were not calculated properly (start addresses got needlessly rounded down, and end addresses didn't get rounded up at all), address comparison for secondary CPUs was done on only part of the address, and disabled status wasn't tracked properly. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <4CE24DF40200007800022737@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86/kprobes: Prevent kprobes to probe on save_args()Masami Hiramatsu1-0/+2
Prevent kprobes to probe on save_args() since this function will be called from breakpoint exception handler. That will cause infinit loop on breakpoint handling. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86: UV: Address interrupt/IO port operation conflictDimitri Sivanich5-5/+49
This patch for SGI UV systems addresses a problem whereby interrupt transactions being looped back from a local IOH, through the hub to a local CPU can (erroneously) conflict with IO port operations and other transactions. To workaound this we set a high bit in the APIC IDs used for interrupts. This bit appears to be ignored by the sockets, but it avoids the conflict in the hub. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20101116222352.GA8155@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> ___ arch/x86/include/asm/uv/uv_hub.h | 4 ++++ arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++- arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++-- arch/x86/platform/uv/tlb_uv.c | 2 +- arch/x86/platform/uv/uv_time.c | 4 +++- 5 files changed, 49 insertions(+), 5 deletions(-)
2010-11-18Merge branch 'perf/urgent' of ↵Ingo Molnar1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2010-11-18x86: Use online node real index in calulate_tbl_offset()Yinghai Lu1-2/+3
Found a NUMA system that doesn't have RAM installed at the first socket which hangs while executing init scripts. bisected it to: | commit 932967202182743c01a2eee4bdfa2c42697bc586 | Author: Shaohua Li <shaohua.li@intel.com> | Date: Wed Oct 20 11:07:03 2010 +0800 | | x86: Spread tlb flush vector between nodes It turns out when first socket is not online it could have cpus on node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS. That could affect systems like 4 sockets, but socket 2 doesn't have installed, sockets 3 will get too big tlb_offset. Need to use real online node idx. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Shaohua Li <shaohua.li@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CDEDE59.40603@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, asm: Fix binutils 2.15 build failureTetsuo Handa1-1/+1
Add parentheses around one pushl_cfi argument. Commit df5d1874 "x86: Use {push,pop}{l,q}_cfi in more places" caused GNU assembler 2.15 (Debian Sarge) to fail. It is still failing as of commit 07bd8516 "x86, asm: Restore parentheses around one pushl_cfi argument". This patch solves build failure with GNU assembler 2.15. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Jan Beulich <jbeulich@novell.com> Cc: heukelum@fastmail.fm Cc: hpa@linux.intel.com LKML-Reference: <201011160445.oAG4jGif079860@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOGRakib Mullick1-3/+4
backtrace_mask has been used under the code context of ARCH_HAS_NMI_WATCHDOG. So put it into that context. We were warned by the following warning: arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18Merge branch 'tip/perf/urgent-3' of ↵Ingo Molnar1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2010-11-18ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fixMagnus Damm1-2/+2
Fix a MSTP assignment problem in the sh7372 clock framework code. The USB drivers should attach to MSTP322 not MSTP33 where IIC1 is located. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-18sh: Use GCC __builtin_prefetch() to implement prefetch().Giuseppe CAVALLARO1-2/+5
GCC's __builtin_prefetch() was introduced a long time ago, all supported GCC versions have it. So this patch is to use it for implementing the prefetch on SH2A and SH4. The current prefetch implementation is almost equivalent with __builtin_prefetch. The third parameter in the __builtin_prefetch is the locality that it's not supported on SH architectures. It has been set to three and it should be verified if it's suitable for SH2A as well. I didn't test on this architecture. The builtin usage should be more efficient that an __asm__ because less barriers, and because the compiler doesn't see the inst as a "black box" allowing better code generation. This has been already done on other architectures (see the commit: 0453fb3c528c5eb3483441a466b24a4cb409eec5). Many thanks to Christian Bruel <christain.bruel@st.com> for his support on evaluate the impact of the gcc built-in on SH4 arch. No regressions found while testing with LMbench on STLinux targets. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-18powerpc: Update a BKL related commentAlessio Igor Bogani1-3/+2
The commit 5e3d20a remove bkl from startup code so setup_arch() it isn't called with bkl held anymore. Update the comment on top of that function. Fix also a typo. This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc/mm: Fix module instruction tlb fault handling on Book-E 64Kumar Gala1-1/+4
We were seeing oops like the following when we did an rmmod on a module: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0x8000000000008010 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P5020 DS last sysfs file: /sys/devices/qman-portals.2/qman-pool.9/uevent Modules linked in: qman_tester(-) NIP: 8000000000008010 LR: c000000000074858 CTR: 8000000000008010 REGS: c00000002e29bab0 TRAP: 0400 Not tainted (2.6.34.6-00744-g2d21f14) MSR: 0000000080029000 <EE,ME,CE> CR: 24000448 XER: 00000000 TASK = c00000007a8be600[4987] 'rmmod' THREAD: c00000002e298000 CPU: 1 GPR00: 8000000000008010 c00000002e29bd30 8000000000012798 c00000000035fb28 GPR04: 0000000000000002 0000000000000002 0000000024022428 c000000000009108 GPR08: fffffffffffffffe 800000000000a618 c0000000003c13c8 0000000000000000 GPR12: 0000000022000444 c00000000fffed00 0000000000000000 0000000000000000 GPR16: 00000000100c0000 0000000000000000 00000000100dabc8 0000000010099688 GPR20: 0000000000000000 00000000100cfc28 0000000000000000 0000000010011a44 GPR24: 00000000100017b2 0000000000000000 0000000000000000 0000000000000880 GPR28: c00000000035fb28 800000000000a7b8 c000000000376d80 c0000000003cce50 NIP [8000000000008010] .test_exit+0x0/0x10 [qman_tester] LR [c000000000074858] .SyS_delete_module+0x1f8/0x2f0 Call Trace: [c00000002e29bd30] [c0000000000748b4] .SyS_delete_module+0x254/0x2f0 (unreliable) [c00000002e29be30] [c000000000000580] syscall_exit+0x0/0x2c Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX 38600000 4e800020 60000000 60000000 <4e800020> 60000000 60000000 60000000 ---[ end trace 4f57124939a84dc8 ]--- This appears to be due to checking the wrong permission bits in the instruction_tlb_miss handling if the address that faulted was in vmalloc space. We need to look at the supervisor execute (_PAGE_BAP_SX) bit and not the user bit (_PAGE_BAP_UX/_PAGE_EXEC). Also removed a branch level since it did not appear to be used. Reported-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc: Fix call to subpage_protection()Michael Neuling1-1/+1
In: powerpc/mm: Fix pgtable cache cleanup with CONFIG_PPC_SUBPAGE_PROT commit d28513bc7f675d28b479db666d572e078ecf182d Author: David Gibson <david@gibson.dropbear.id.au> subpage_protection() was changed to to take an mm rather a pgdir but it didn't change calling site in hashpage_preload(). The change wasn't noticed at compile time since hashpage_preload() used a void* as the parameter to subpage_protection(). This is obviously wrong and can trigger the following crash when CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_PPC_64K_PAGES CONFIG_PPC_SUBPAGE_PROT are enabled. Freeing unused kernel memory: 704k freed Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6c49b7 Faulting instruction address: 0xc0000000000410f4 cpu 0x2: Vector: 300 (Data Access) at [c00000004233f590] pc: c0000000000410f4: .hash_preload+0x258/0x338 lr: c000000000041054: .hash_preload+0x1b8/0x338 sp: c00000004233f810 msr: 8000000000009032 dar: 6b6b6b6b6b6c49b7 dsisr: 40000000 current = 0xc00000007e2c0070 paca = 0xc000000007fe0500 pid = 1, comm = init enter ? for help [c00000004233f810] c000000000041020 .hash_preload+0x184/0x338 (unreliable) [c00000004233f8f0] c00000000003ed98 .update_mmu_cache+0xb0/0xd0 [c00000004233f990] c000000000157754 .__do_fault+0x48c/0x5dc [c00000004233faa0] c000000000158fd0 .handle_mm_fault+0x508/0xa8c [c00000004233fb90] c0000000006acdd4 .do_page_fault+0x428/0x6ac [c00000004233fe30] c000000000005260 handle_page_fault+0x20/0x74 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc: Set CONFIG_32BIT on ppc32kerstin jonsson1-0/+4
commit ffe8018c3424892c9590048fc36caa6c3e0c8a76 of the -mm tree fixes the initramfs size calculation for e.g. s390 but breaks it for 32bit architectures which do not define CONFIG_32BIT. This patch fix the problem for PPC32 which will elsewise end up with a __initramfs_size of 0. Signed-off-by: Kerstin Jonsson <kerstin.jonsson@ericsson.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc/mm: Fix build error in setup_initial_memory_limitKumar Gala1-1/+1
arch/powerpc/mm/tlb_nohash.c: In function 'setup_initial_memory_limit': arch/powerpc/mm/tlb_nohash.c:588:29: error: 'ppc64_memblock_base' undeclared (first use in this function) arch/powerpc/mm/tlb_nohash.c:588:29: note: each undeclared identifier is reported only once for each function it appears in Due to a copy/paste typo with the following commit: commit cd3db0c4ca3d237e7ad20f7107216e575705d2b0 Author: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue Jul 6 15:39:02 2010 -0700 memblock: Remove rmo_size, burry it in arch/powerpc where it belongs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc/pseries: Don't override CONFIG_PPC_PSERIES_DEBUGNishanth Aravamudan3-4/+6
EEH and pci_dlpar #undef DEBUG, but I think they were added before the ability to control this from Kconfig. It's really annoying to only get some of the debug messages from these files. Leave the lpar.c #undef alone as it produces so much output as to make the kernel unusable. Update the Kconfig text to indicate this particular quirk :) Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18powerpc: Fix div64 in bootloaderBenjamin Herrenschmidt1-1/+2
The code is missing a fix that went into the main kernel variant (we should try to share that code again at some stage) Reported-by: Albert Cahalan <acahalan@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-17KVM: VMX: Fix host userspace gsbase corruptionAvi Kivity1-8/+7
We now use load_gs_index() to load gs safely; unfortunately this also changes MSR_KERNEL_GS_BASE, which we managed separately. This resulted in confusion and breakage running 32-bit host userspace on a 64-bit kernel. Fix by - saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs - doing the host save/load unconditionally, instead of only when in guest long mode Things can be cleaned up further, but this is the minmal fix for now. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17KVM: Correct ordering of ldt reload wrt fs/gs reloadAvi Kivity2-3/+3
If fs or gs refer to the ldt, they must be reloaded after the ldt. Reorder the code to that effect. Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix a user-visible bug. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-17kgdb,ppc: Fix regression in evr register handlingDongdong Deng1-2/+2
Commit ff10b88b5a05c8f1646dd15fb9f6093c1384ff6d (kgdb,ppc: Individual register get/set for ppc) introduced a problem where memcpy was used incorrectly to read and write the evr registers with a kernel that has: CONFIG_FSL_BOOKE=y CONFIG_SPE=y CONFIG_KGDB=y This patch also fixes the following compilation problems: arch/powerpc/kernel/kgdb.c: In function 'dbg_get_reg': arch/powerpc/kernel/kgdb.c:341: error: passing argument 2 of 'memcpy' makes pointer from integer without a cast arch/powerpc/kernel/kgdb.c: In function 'dbg_set_reg': arch/powerpc/kernel/kgdb.c:366: error: passing argument 1 of 'memcpy' makes pointer from integer without a cast [jason.wessel@windriver.com: Remove void * casts and fix patch header] Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: linuxppc-dev@lists.ozlabs.org
2010-11-17kgdb,x86: fix regression in detach handlingJason Wessel1-4/+8
The fix from ba773f7c510c0b252145933926c636c439889207 (x86,kgdb: Fix hw breakpoint regression) was not entirely complete. The kgdb_remove_all_hw_break() function also needs to call the hw_break_release_slot() or else a breakpoint can get activated again after the debugger has detached. The kgdb test suite exposes the behavior in the form of either a hang or repetitive failure. The kernel config that exposes the problem contains all of the following: CONFIG_DEBUG_RODATA=y CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100" Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-17ASoC: davinci: fixes for multi-componentChris Paulson-Ellis3-8/+8
Multi-component commit f0fba2ad broke a few things which this patch should fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be good if those with access to other Davinci boards could test. -- The multi-component commit put the initialisation of snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c). The initialisation had to be moved from the probe function in these drivers because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver. Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in davinci-pcm.c) before hw_params is called. I have moved the initialisation to a new snd_soc_dai_ops.startup function in each of these drivers. This fix indicates that all platforms that use davinci-pcm must have been broken and need to test with this fix. -- The multi-component commit also changed the McBSP driver name from "davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board level references to the driver name. This change is understandable, as there is a similarly named "davinci-mcasp" driver in davinci-mcasp.c. There is probably no 'correct' name for this driver. The DM6446 datasheet calls it the "ASP" and describes it as a "specialised McBSP". The DM355 datasheet calls it the "ASP" and describes it as a "specialised ASP". The DM365 datasheet calls it the "McBSP". Rather than fix this problem by reverting to "davinci-asp", I've elected to avoid future confusion with the "davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also consistent with the names of the functions in the driver. There are other fixes required, so it was never going to be as simple as a revert anyway. -- The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has 2 ports), so I've changed the the id of the platform_device from 0 to -1. -- In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link structure with the DM355 EVM as they use different cpu DAI names (the DM355 has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port). This also means that the 2 boards need different snd_soc_card structures. -- The codec_name entries in davinci-evm.c didn't match the i2c ids in the board files. I have only checked and fixed the details of the names used for the McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should check the others. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann26-26/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17sh: fix vsyscall compilation due to .eh_frame issueGiuseppe CAVALLARO1-1/+1
This patch fixes the following error obtained when compile the Kernel with the VSYSCALL support enabled: SYSCALL arch/sh/kernel/vsyscall/vsyscall-trapa.so sh4-linux/bin/ld: error in arch/sh/kernel/vsyscall/vsyscall-trapa.o(.eh_frame); no .eh_frame_hdr table will be created. AS arch/sh/kernel/vsyscall/vsyscall-syscall.o Disassembling the vsyscall-trapa.o code, with this fix applied, we get the __kernel_vsyscall symbol defined; otherwise it was missing. Disassembly of section .text: 00000000 <__kernel_vsyscall>: 0: 10 00 .word 0x0010 2: 00 00 .word 0x0000 [snip] 0000040 <__kernel_sigreturn>: 40: 05 93 mov.w 4e <__kernel_sigreturn+0xe>,r3 ! 77 42: 10 c3 trapa #16 [snip] 00000060 <__kernel_rt_sigreturn>: 60: 05 93 mov.w 6e <__kernel_rt_sigreturn+0xe>,r3 ! ad 62: 10 c3 trapa #16 [snip] Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17sh: avoid to flush all cache in sys_cacheflushGiuseppe CAVALLARO1-1/+1
Calling sys_cacheflush with ICACHE we can direclty flush the icache without invoking the flush_cache_all function. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16SCSI host lock push-downJeff Garzik1-1/+3
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16Merge commit 'v2.6.37-rc2' into upstream/xenfsJeremy Fitzhardinge2845-40642/+106222
* commit 'v2.6.37-rc2': (10093 commits) Linux 2.6.37-rc2 capabilities/syslog: open code cap_syslog logic to fix build failure i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata include/linux/kernel.h: Move logging bits to include/linux/printk.h Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again) hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch PCI: sysfs: fix printk warnings GFS2: Fix inode deallocation race ...
2010-11-16Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds4-21/+73
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] kprobes: Fix the return address of multiple kretprobes [S390] kprobes: disable interrupts throughout [S390] ftrace: build without frame pointers on s390 [S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking [S390] vmlogrdr: purge after recording is switched off [S390] cio: fix incorrect ccw_device_init_count [S390] tape: add medium state notifications [S390] fix get_user_pages_fast
2010-11-16Merge branch 'common/clkfwk' into sh-fixes-for-linusPaul Mundt2-5/+3
2010-11-15Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap1: devices: need to return with a value OMAP1: camera.h: add missing include omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts OMAP2: Devkit8000: Fix mmc regulator failure
2010-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-20/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds2-17/+17
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 07:16:30 +0000